Items - REPAIR/REPLACEMENT OF LT CABLE AND EXTERNAL ELECTRIC SUPPLY WIITH OTHER CONNECTED ITEMS AT MALAD, KANDIVLI AND MARVE AREA UNDER GE (N) MUMBAI
| Item Rate BoQ | ||||||||||||||||||||||||||||||||||||||||||||||||||||||
| BoQ_Ver3.1 | Item Rate | Normal | INR Only | INR | ||||||||||||||||||||||||||||||||||||||||||||||||||
| Select, Excess (+), Less (-) | Less (-) | |||||||||||||||||||||||||||||||||||||||||||||||||||||
| Tender Inviting Authority: Garrison Engineer (North) Mumbai | ||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Name of Work: :REPAIR/REPLACEMENT OF LT CABLE AND EXTERNAL ELECTRIC SUPPLY WIITH OTHER CONNECTED ITEMS AT MASLAD, KANDIVLI AND MARVE AREA UNDER GE (N) MUMBAI | ||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Contract No: GE(N) M- OF 2025-2026 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Name of the Bidder/ Bidding Firm / Company : | ||||||||||||||||||||||||||||||||||||||||||||||||||||||
| PRICE SCHEDULE ( BOQ DATED : 22 AUG 2025) (This BOQ template must not be modified/replaced by the bidder and the same should be uploaded after filling the relevant columns, else the bidder is liable to be rejected for this tender. Bidders are allowed to enter the Bidder Name and Values only ) | ||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Sl. No. | Item Description | Item Code / Make | Quantity | Units | Estimated Rate in Rs. P | Addition / Deduction | Addition / Deduction Values | Currency Convertion against each Item | Quoted Currency in INR / Other Currency | BASIC RATE In Figures To be entered by the Bidder Rs. P | Excise Duty | VAT | Freight Charges ( Unloading & Stacking) | Any Other Taxes/Duties/Levies | Other Taxes 2 | IIIrd Party i.e DGS&D / RITES etc Inspection Charges @0.34%+Service Tax | Less for Cenvat Credit,if any respect of Supplies Under full Excise Duty Category | TOTAL AMOUNT in Rs. P | TOTAL AMOUNT | TOTAL AMOUNT In Words | ||||||||||||||||||||||||||||||||||
| 1 | 2 | 3 | 3 | 4 | 6 | 7 | 8 | 9 | 10 | 11 | 12 | 5 | 14 | 15 | 16 | 17 | 18 | 19 | 20 | 21 | 22 | 23 | 24 | 25 | 26 | 27 | 28 | 29 | 30 | 31 | 32 | 33 | 34 | 35 | 36 | 37 | 38 | 39 | 40 | 41 | 42 | 43 | 44 | 45 | 46 | 47 | 48 | 49 | 50 | 51 | 52 | 8 | 6 | 7 |
| 1 | Supply, install, testing & commissioning pedestal cubical type double door LT bus bar chamber box factory made modular construction fabricated out of 3 mm thick CRCA sheet, angle iron, channels, epoxy powder coated to give a superior finish , outdoor type , totally enclosed dust & vermin proof with locking arrangements front & back side opening system including rain shed, busbar chamber should be suitable for accomodating all Aluminium bus bar strips (50mm x 10mm x 04 Nos) fixed on porcelain insulators, and one independent metering module suitable for accomodating three phase volt meters & ammeter digital type, indicator lamps, cable entry/exits cut outs at bottom part, with fixing arrangement on PCC (1:3:6) type C-2 bed block with studs, bolts, nuts & washers, Danger notice board with scull suitable for 415 volts or required size to be fixed on Pannel including dismantling of old Bus bar panel all as specified and directed by Engr-in Charge. Notes:-(a) Aluminium bus bar duly covered with colour coded shrinkable sleeves of required size for Phases and neutral - 01 set (b) Digital multifunction meter of size 96x96 mm to measure current, voltage, frequency and power factor with built in selector switch and programable CT of appropriate ratio.-01 No Make-L&T / Automatic Electrical (AE)/ Havells/ Enercon/ Secure Meter (c) Panel indicating lamp neon/LED type (Red ,Yellow & Blue) with lamp holders - 03 Nos (d) Panel instrumental wiring with FRLS suitable size but not less than 2.5 sqmm copper wire single core - 01 Job (e) Necessary sizes of lugs for fixing of cables in bus bar deemded to be included rate quoted by the contractor. (e) Panel shall be Manufactured from CPRI approved manufacturer and Drawing for panel shall be first approval by Engr-in-Charge | 8.00 | EACH | 100.00 | Excess(+) | 1 | Full Conversion | INR | 0.00 | 0.00 | INR Zero Only | 1 | Supply, install, testing & commissioning pedestal cubical type double door LT bus bar chamber box factory made modular construction fabricated out of 3 mm thick CRCA sheet, angle iron, channels, epoxy powder coated to give a superior finish , outdoor type , totally enclosed dust & vermin proof with locking arrangements front & back side opening system including rain shed, busbar chamber should be suitable for accomodating all Aluminium bus bar strips (50mm x 10mm x 04 Nos) fixed on porcelain insulators, and one independent metering module suitable for accomodating three phase volt meters & ammeter digital type, indicator lamps, cable entry/exits cut outs at bottom part, with fixing arrangement on PCC (1:3:6) type C-2 bed block with studs, bolts, nuts & washers, Danger notice board with scull suitable for 415 volts or required size to be fixed on Pannel including dismantling of old Bus bar panel all as specified and directed by Engr-in Charge. Notes:-(a) Aluminium bus bar duly covered with colour coded shrinkable sleeves of required size for Phases and neutral - 01 set (b) Digital multifunction meter of size 96x96 mm to measure current, voltage, frequency and power factor with built in selector switch and programable CT of appropriate ratio.-01 No Make-L&T / Automatic Electrical (AE)/ Havells/ Enercon/ Secure Meter (c) Panel indicating lamp neon/LED type (Red ,Yellow & Blue) with lamp holders - 03 Nos (d) Panel instrumental wiring with FRLS suitable size but not less than 2.5 sqmm copper wire single core - 01 Job (e) Necessary sizes of lugs for fixing of cables in bus bar deemded to be included rate quoted by the contractor. (e) Panel shall be Manufactured from CPRI approved manufacturer and Drawing for panel shall be first approval by Engr-in-Charge | 8 | EACH | |||||||||||||||||||||||||||||||||||||||
| 2 | Supply and erect 6 meter long hot dipped galvanised OCTAGONAL street light pole with one single light bracket for street light, the bottom of Pole shall be 130mm dia and top shall be 70mm dia with 3mm thickness, high tensile strength confirming to BS EN 10025. Base plate shall be 220x220x12mm with 4 Nos of anchor bolt 'J' type 700mm long 20mm dia with nut, washer and bolt shall be inserted to RCC footing with internal in built Junction box including 3 phase busbar and one 6 Amp MCB complete including necessary earth work excavation in hard/dense soil, PCC 1:4:8 for foundation, RCC M-20 concrete footing with reinforcement, formwork etc complete all as per mafucturer's instructions and as directed by Engineer-in-Charge. Note: (i) The unit quoted rate shall deem to be included for earth work excavation in hard/dense soil, PCC 1:4:8 for foundation, RCC M-20 concrete footing with reinforcement & formwork. Make of Pole- Bajaj/ Utkarsha India/ Bombay Tubes & Pole Co. Make of MCB :Legrand / L&T / Havells/Benlo | 20.00 | EACH JOB | 100.00 | Excess(+) | 1 | Full Conversion | INR | 0.00 | 0.00 | INR Zero Only | 2 | Supply and erect 6 meter long hot dipped galvanised OCTAGONAL street light pole with one single light bracket for street light, the bottom of Pole shall be 130mm dia and top shall be 70mm dia with 3mm thickness, high tensile strength confirming to BS EN 10025. Base plate shall be 220x220x12mm with 4 Nos of anchor bolt 'J' type 700mm long 20mm dia with nut, washer and bolt shall be inserted to RCC footing with internal in built Junction box including 3 phase busbar and one 6 Amp MCB complete including necessary earth work excavation in hard/dense soil, PCC 1:4:8 for foundation, RCC M-20 concrete footing with reinforcement, formwork etc complete all as per mafucturer's instructions and as directed by Engineer-in-Charge. Note: (i) The unit quoted rate shall deem to be included for earth work excavation in hard/dense soil, PCC 1:4:8 for foundation, RCC M-20 concrete footing with reinforcement & formwork. Make of Pole- Bajaj/ Utkarsha India/ Bombay Tubes & Pole Co. Make of MCB :Legrand / L&T / Havells/Benlo | 20 | EACH JOB | |||||||||||||||||||||||||||||||||||||||
| 3 | Supply and fix in repairs MCCBs 400 Amps, 36 KA, 4 pole, 415 Volts with adjustable thermal and adjustable magnetic settings with extended copper terminals complete all as specified and as directed by Engineer-in-Charge. Make : Larsen &Toubro/ ABB/ Siemens/ Schneider/ Havells/ Legrand/ Indo ASIAN/ C & S Electric/ BhartiaCuttler Hammer (BCH)/Benlo | 1.00 | EACH | 10.00 | Excess(+) | 1 | Full Conversion | INR | 0.00 | 0.00 | INR Zero Only | 3 | Supply and fix in repairs MCCBs 400 Amps, 36 KA, 4 pole, 415 Volts with adjustable thermal and adjustable magnetic settings with extended copper terminals complete all as specified and as directed by Engineer-in-Charge. Make : Larsen &Toubro/ ABB/ Siemens/ Schneider/ Havells/ Legrand/ Indo ASIAN/ C & S Electric/ BhartiaCuttler Hammer (BCH)/Benlo | 1 | EACH | |||||||||||||||||||||||||||||||||||||||
| 4 | Supply and fix in repairs MCCBs 160 Amps, 36 KA, 4 pole, 415 Volts with adjustable thermal and adjustable magnetic settings with extended copper terminals complete all as specified and as directed by Engineer-in-Charge. Make : Larsen &Toubro/ ABB/ Siemens/ Schneider/ Havells/ Legrand/ Indo ASIAN/ C & S Electric/ BhartiaCuttler Hammer (BCH)/Benlo | 1.00 | EACH | 10.00 | Excess(+) | 1 | Full Conversion | INR | 0.00 | 0.00 | INR Zero Only | 4 | Supply and fix in repairs MCCBs 160 Amps, 36 KA, 4 pole, 415 Volts with adjustable thermal and adjustable magnetic settings with extended copper terminals complete all as specified and as directed by Engineer-in-Charge. Make : Larsen &Toubro/ ABB/ Siemens/ Schneider/ Havells/ Legrand/ Indo ASIAN/ C & S Electric/ BhartiaCuttler Hammer (BCH)/Benlo | 1 | EACH | |||||||||||||||||||||||||||||||||||||||
| 5 | Supply and fix in repairs MCCBs 100 Amps, 16 KA, 4 pole, 415 Volts with adjustable thermal and adjustable magnetic settings with extended copper terminals complete all as specified and as directed by Engineer-in-Charge. Make : Larsen &Toubro/ ABB/ Siemens/ Schneider/ Havells/ Legrand/ Indo ASIAN/ C & S Electric/ BhartiaCuttler Hammer (BCH)/Benlo | 1.00 | EACH | 10.00 | Excess(+) | 1 | Full Conversion | INR | 0.00 | 0.00 | INR Zero Only | 5 | Supply and fix in repairs MCCBs 100 Amps, 16 KA, 4 pole, 415 Volts with adjustable thermal and adjustable magnetic settings with extended copper terminals complete all as specified and as directed by Engineer-in-Charge. Make : Larsen &Toubro/ ABB/ Siemens/ Schneider/ Havells/ Legrand/ Indo ASIAN/ C & S Electric/ BhartiaCuttler Hammer (BCH)/Benlo | 1 | EACH | |||||||||||||||||||||||||||||||||||||||
| 6 | Supply & Fix 8.50 metres long Steel tubular swaged poles complete with cast iron base plate, finial taper plug, bolts, nuts and screws as specified ,type 410 SP-22 along with brackets for fixing LED street light including dismantling and taking down existing damaged/broken PCC Pole Complete all as specified and directed by engineer In Charge. Note : Necessary PCC concrete and earth work will be measured and paid seperately. Make: India Tube and Co / India Electric Poles Mfg Co,Maharashtra / Bombay Tubes / Kalinga Tubes / Singh Profile, Pune | 14.00 | EACH | 10.00 | Excess(+) | 1 | Full Conversion | INR | 0.00 | 0.00 | INR Zero Only | 6 | Supply & Fix 8.50 metres long Steel tubular swaged poles complete with cast iron base plate, finial taper plug, bolts, nuts and screws as specified ,type 410 SP-22 along with brackets for fixing LED street light including dismantling and taking down existing damaged/broken PCC Pole Complete all as specified and directed by engineer In Charge. Note : Necessary PCC concrete and earth work will be measured and paid seperately. Make: India Tube and Co / India Electric Poles Mfg Co,Maharashtra / Bombay Tubes / Kalinga Tubes / Singh Profile, Pune | 14 | EACH | |||||||||||||||||||||||||||||||||||||||
| 7 | Supply and fix in repairs MCCBs 250 Amps, 36 KA, 4 pole, 415 Volts with adjustable thermal and adjustable magnetic settings with extended copper terminals complete all as specified and as directed by Engineer-in-Charge. Make : Larsen &Toubro/ ABB/ Siemens/ Schneider/ Havells/ Legrand/ Indo ASIAN/ C & S Electric/ BhartiaCuttler Hammer (BCH)/Benlo | 1.00 | EACH | 10.00 | Excess(+) | 1 | Full Conversion | INR | 0.00 | 0.00 | INR Zero Only | 7 | Supply and fix in repairs MCCBs 250 Amps, 36 KA, 4 pole, 415 Volts with adjustable thermal and adjustable magnetic settings with extended copper terminals complete all as specified and as directed by Engineer-in-Charge. Make : Larsen &Toubro/ ABB/ Siemens/ Schneider/ Havells/ Legrand/ Indo ASIAN/ C & S Electric/ BhartiaCuttler Hammer (BCH)/Benlo | 1 | EACH | |||||||||||||||||||||||||||||||||||||||
| 8 | Supplying, laying,connecting, testing & commissioning LT UG XLPE insulated, heavy duty, 1100 V grade electric cable with aluminium conductor, served with an inner sheathing of PVC tape, armoured with galvanised steel wire or tape and overall PVC sheathed of size 16 Sqmm x 4 core, laid in trenches or passing through pipe or fixed to wall, making all connections with and including provision of necessary glands, lugs, bushing etc as required including taking down old unserviceable cable complete all as specified and as directed by Engineer-in-Charge of following sizes:- Note : Earthwork excavation, DWC/GI pipe for cable protection shall be measured and paid separately in their respective items Make: Cable Corporation of India (CCI)/ Asian Cable Co, Chattisgarh/ Finolex/ Polycab/ Gloster/Universal/ RPG Cables Ltd , Thane/ Havells India Ltd/ RR Kabel/ KEI Industries Ltd(KEI) | 450.00 | RUNNING METRE | 10.00 | Excess(+) | 1 | Full Conversion | INR | 0.00 | 0.00 | INR Zero Only | 8 | Supplying, laying,connecting, testing & commissioning LT UG XLPE insulated, heavy duty, 1100 V grade electric cable with aluminium conductor, served with an inner sheathing of PVC tape, armoured with galvanised steel wire or tape and overall PVC sheathed of size 16 Sqmm x 4 core, laid in trenches or passing through pipe or fixed to wall, making all connections with and including provision of necessary glands, lugs, bushing etc as required including taking down old unserviceable cable complete all as specified and as directed by Engineer-in-Charge of following sizes:- Note : Earthwork excavation, DWC/GI pipe for cable protection shall be measured and paid separately in their respective items Make: Cable Corporation of India (CCI)/ Asian Cable Co, Chattisgarh/ Finolex/ Polycab/ Gloster/Universal/ RPG Cables Ltd , Thane/ Havells India Ltd/ RR Kabel/ KEI Industries Ltd(KEI) | 450 | RUNNING METRE | |||||||||||||||||||||||||||||||||||||||
| 9 | -do- same as Item no. 8 above but of size 16 Sqmm 2 Core | 450.00 | RUNNING METRE | 10.00 | Excess(+) | 1 | Full Conversion | INR | 0.00 | 0.00 | INR Zero Only | 9 | -do- same as Item no. 8 above but of size 16 Sqmm 2 Core | 450 | RUNNING METRE | |||||||||||||||||||||||||||||||||||||||
| 10 | -do- same as Item no. 8 above but of size 25 Sqmm 4 Core | 250.00 | RUNNING METRE | 10.00 | Excess(+) | 1 | Full Conversion | INR | 0.00 | 0.00 | INR Zero Only | 10 | -do- same as Item no. 8 above but of size 25 Sqmm 4 Core | 250 | RUNNING METRE | |||||||||||||||||||||||||||||||||||||||
| 11 | -do- same as Item no. 8 above but of size 35 Sqmm 3.5 Core | 250.00 | RUNNING METRE | 10.00 | Excess(+) | 1 | Full Conversion | INR | 0.00 | 0.00 | INR Zero Only | 11 | -do- same as Item no. 8 above but of size 35 Sqmm 3.5 Core | 250 | RUNNING METRE | |||||||||||||||||||||||||||||||||||||||
| 12 | -do- same as Item no. 8 above but of size 50 Sqmm 3.5 Core | 250.00 | RUNNING METRE | 10.00 | Excess(+) | 1 | Full Conversion | INR | 0.00 | 0.00 | INR Zero Only | 12 | -do- same as Item no. 8 above but of size 50 Sqmm 3.5 Core | 250 | RUNNING METRE | |||||||||||||||||||||||||||||||||||||||
| 13 | -do- same as Item no. 8 above but of size 70 Sqmm 3.5 Core | 200.00 | RUNNING METRE | 10.00 | Excess(+) | 1 | Full Conversion | INR | 0.00 | 0.00 | INR Zero Only | 13 | -do- same as Item no. 8 above but of size 70 Sqmm 3.5 Core | 200 | RUNNING METRE | |||||||||||||||||||||||||||||||||||||||
| 14 | -do- same as Item no. 8 above but of size 95 Sqmm 3.5 Core | 120.00 | RUNNING METRE | 10.00 | Excess(+) | 1 | Full Conversion | INR | 0.00 | 0.00 | INR Zero Only | 14 | -do- same as Item no. 8 above but of size 95 Sqmm 3.5 Core | 120 | RUNNING METRE | |||||||||||||||||||||||||||||||||||||||
| 15 | -do- same as Item no. 8 above but of size 120 Sqmm 3.5 Core | 50.00 | RUNNING METRE | 10.00 | Excess(+) | 1 | Full Conversion | INR | 0.00 | 0.00 | INR Zero Only | 15 | -do- same as Item no. 8 above but of size 120 Sqmm 3.5 Core | 50 | RUNNING METRE | |||||||||||||||||||||||||||||||||||||||
| 16 | -do- same as Item no. 8 above but of size 240 Sqmm 3.5 Core | 30.00 | RUNNING METRE | 100.00 | Excess(+) | 1 | Full Conversion | INR | 0.00 | 0.00 | INR Zero Only | 16 | -do- same as Item no. 8 above but of size 240 Sqmm 3.5 Core | 30 | RUNNING METRE | |||||||||||||||||||||||||||||||||||||||
| 17 | Supply and lay double wall corrugated (DWC) HDPE pipe 63mm outer dia , as per IS-16205 including couplers and bend for cable protection laid in trenches etc complete all as specified and as directed by Engineer-in-Charge Make : TELEREX 450N/ Rex Polyextrusion Ltd/ Finolex/ Prince Pipes and fittings ltd/Kisan/Supreme/JAIN IRRIGATION SYS/ Astral | 1845.00 | RUNNING METRE | 100.00 | Excess(+) | 1 | Full Conversion | INR | 0.00 | 0.00 | INR Zero Only | 17 | Supply and lay double wall corrugated (DWC) HDPE pipe 63mm outer dia , as per IS-16205 including couplers and bend for cable protection laid in trenches etc complete all as specified and as directed by Engineer-in-Charge Make : TELEREX 450N/ Rex Polyextrusion Ltd/ Finolex/ Prince Pipes and fittings ltd/Kisan/Supreme/JAIN IRRIGATION SYS/ Astral | 1845 | RUNNING METRE | |||||||||||||||||||||||||||||||||||||||
| 18 | Excavation in trenches, not exceeding 1.50 m wide and not exceeding 1.5 m in depth, for foundation, laying of cables/pipes etc and getting out in soft/loose soil complete all as specified and as directed by Engineer-in-Charge. | 350.40 | CUBIC METRE | 10.00 | Excess(+) | 1 | Full Conversion | INR | 0.00 | 0.00 | INR Zero Only | 18 | Excavation in trenches, not exceeding 1.50 m wide and not exceeding 1.5 m in depth, for foundation, laying of cables/pipes etc and getting out in soft/loose soil complete all as specified and as directed by Engineer-in-Charge. | 350.4 | CUBIC METRE | |||||||||||||||||||||||||||||||||||||||
| 19 | Excavation in trenches not exceeding 1.50 m wide and exceeding 1.5m deep but not exceeding 3.0m in deep and getting out in soft/loose soil complete all as specified and as directed by Engineer-in-Charge | 0.76 | CUBIC METRE | 10.00 | Excess(+) | 1 | Full Conversion | INR | 0.00 | 0.00 | INR Zero Only | 19 | Excavation in trenches not exceeding 1.50 m wide and exceeding 1.5m deep but not exceeding 3.0m in deep and getting out in soft/loose soil complete all as specified and as directed by Engineer-in-Charge | 0.76 | CUBIC METRE | |||||||||||||||||||||||||||||||||||||||
| 20 | Returning, filling in including spreading, levelling, watering and well ramming in layers, not exceeding 25cm in soil complete all as specified and as directed by Engineer-in-Charge. | 313.54 | CUBIC METRE | 10.00 | Excess(+) | 1 | Full Conversion | INR | 0.00 | 0.00 | INR Zero Only | 20 | Returning, filling in including spreading, levelling, watering and well ramming in layers, not exceeding 25cm in soil complete all as specified and as directed by Engineer-in-Charge. | 313.54 | CUBIC METRE | |||||||||||||||||||||||||||||||||||||||
| 21 | Removing excavated material to a distance, not exceeding 50 m and depositing where directed, at a level not exceeding 1.5 mtr above the starting point complete all as specified and as directed by Engineer-in-Charge | 36.86 | CUBIC METRE | 10.00 | Excess(+) | 1 | Full Conversion | INR | 0.00 | 0.00 | INR Zero Only | 21 | Removing excavated material to a distance, not exceeding 50 m and depositing where directed, at a level not exceeding 1.5 mtr above the starting point complete all as specified and as directed by Engineer-in-Charge | 36.86 | CUBIC METRE | |||||||||||||||||||||||||||||||||||||||
| 22 | Material and labour for finding cable fault with electronic fault detector in LT UG cable of size upto 400 sqmm x 3.5 core complete including necessary earth work excavation all as specified and as directed by Engineer-in-Charge. | 10.00 | EACH JOB | 10.00 | Excess(+) | 1 | Full Conversion | INR | 0.00 | 0.00 | INR Zero Only | 22 | Material and labour for finding cable fault with electronic fault detector in LT UG cable of size upto 400 sqmm x 3.5 core complete including necessary earth work excavation all as specified and as directed by Engineer-in-Charge. | 10 | EACH JOB | |||||||||||||||||||||||||||||||||||||||
| 23 | Material and labour for earthing complete with Galvanised steel earth plate electrode 60cm X 60cm X 6 mm thick, buried directly in ground (earth pit not less than 2.25 metres deep below normal ground level) with top edge of earth the plate not less than 1.5 metres below normal ground level, connected to plate with GI earth wire 32 x 6mm GI earth strip, 7.5m long from earth point to test point and other end connected to control board / panel / equipment, laid under floors/plinths or fixed on walls or concealed in wall etc by means of bolts, nuts, check nuts and washers made out of galvanized iron or steel with provision of charcoal & common salt not less than 50Kg, in each earthing packed up to maximum 30 cm on both side of plate and GI strip protected by 40mm bore light grade galvanized iron pipe complete all as shown in electrical plate No. 3 of MES schedule Part I, 2009 with PCC 1:3:6, type C1 in chamber wall with CI cover and frame, watering pipe of size 20mm dia medium grade, 0.63mm thick GI sheet funnel with wire mesh and engraving of earth marking on nearby structure/ building with cement mortar 1:4 plate of size 200mm x 150mm x 15mm thick including necessary excavation and earth work in any type of soil/strata & testing complete all as specified and as directed by Engineer-in-Charge. Note :- (i) Contractor should submit test report of earthing after installation to Engineer -in-Charge | 30.00 | EACH JOB | 10.00 | Excess(+) | 1 | Full Conversion | INR | 0.00 | 0.00 | INR Zero Only | 23 | Material and labour for earthing complete with Galvanised steel earth plate electrode 60cm X 60cm X 6 mm thick, buried directly in ground (earth pit not less than 2.25 metres deep below normal ground level) with top edge of earth the plate not less than 1.5 metres below normal ground level, connected to plate with GI earth wire 32 x 6mm GI earth strip, 7.5m long from earth point to test point and other end connected to control board / panel / equipment, laid under floors/plinths or fixed on walls or concealed in wall etc by means of bolts, nuts, check nuts and washers made out of galvanized iron or steel with provision of charcoal & common salt not less than 50Kg, in each earthing packed up to maximum 30 cm on both side of plate and GI strip protected by 40mm bore light grade galvanized iron pipe complete all as shown in electrical plate No. 3 of MES schedule Part I, 2009 with PCC 1:3:6, type C1 in chamber wall with CI cover and frame, watering pipe of size 20mm dia medium grade, 0.63mm thick GI sheet funnel with wire mesh and engraving of earth marking on nearby structure/ building with cement mortar 1:4 plate of size 200mm x 150mm x 15mm thick including necessary excavation and earth work in any type of soil/strata & testing complete all as specified and as directed by Engineer-in-Charge. Note :- (i) Contractor should submit test report of earthing after installation to Engineer -in-Charge | 30 | EACH JOB | |||||||||||||||||||||||||||||||||||||||
| 24 | Material and labour for cutting or cutting the existing Bitumen Road /hard standing to size not exceeding 45cm wide and depth not less than 45cm for passing of UG cable through GI pipe and making good the disturbed surface filled with excavated material and top 200mm depth with plain cement concrete 1:3:6 type C1 using 20mm graded aggregate complete all as specified and directed. | 20.00 | RUNNING METRE | 10.00 | Excess(+) | 1 | Full Conversion | INR | 0.00 | 0.00 | INR Zero Only | 24 | Material and labour for cutting or cutting the existing Bitumen Road /hard standing to size not exceeding 45cm wide and depth not less than 45cm for passing of UG cable through GI pipe and making good the disturbed surface filled with excavated material and top 200mm depth with plain cement concrete 1:3:6 type C1 using 20mm graded aggregate complete all as specified and directed. | 20 | RUNNING METRE | |||||||||||||||||||||||||||||||||||||||
| 25 | Material and labour for Plain Cement Concrete 1:3:6 type C2 using 40mm graded stone aggregate as in foundation / mass concrete/coping etc including necessary formwork for fair finished surfaces complete all as specified and as directed by the Engineer-in-charge | 0.57 | CUBIC METRE | 10.00 | Excess(+) | 1 | Full Conversion | INR | 0.00 | 0.00 | INR Zero Only | 25 | Material and labour for Plain Cement Concrete 1:3:6 type C2 using 40mm graded stone aggregate as in foundation / mass concrete/coping etc including necessary formwork for fair finished surfaces complete all as specified and as directed by the Engineer-in-charge | 0.57 | CUBIC METRE | |||||||||||||||||||||||||||||||||||||||
| 26 | Material and labour for Plain Cement Concrete 1:4:8 type D2 using 40mm graded stone aggregate as in foundation / mass concrete/coping etc including necessary formwork for fair finished surfaces complete all as specified and as directed by the Engineer-in-charge | 6.58 | CUBIC METRE | 10.00 | Excess(+) | 1 | Full Conversion | INR | 0.00 | 0.00 | INR Zero Only | 26 | Material and labour for Plain Cement Concrete 1:4:8 type D2 using 40mm graded stone aggregate as in foundation / mass concrete/coping etc including necessary formwork for fair finished surfaces complete all as specified and as directed by the Engineer-in-charge | 6.58 | CUBIC METRE | |||||||||||||||||||||||||||||||||||||||
| 27 | Supply and fix in repairs MCCBs 63 Amps, 16 KA, 4 pole, 415 Volts with adjustable thermal and adjustable magnetic settings with extended copper terminals complete all as specified and as directed by Engineer-in-Charge. Make : Larsen &Toubro/ ABB/ Siemens/ Schneider/ Havells/ Legrand/ Indo ASIAN/ C & S Electric/ Bhartia Cuttler Hammer (BCH)/Benlo | 1.00 | EACH | 10.00 | Excess(+) | 1 | Full Conversion | INR | 0.00 | 0.00 | INR Zero Only | 27 | Supply and fix in repairs MCCBs 63 Amps, 16 KA, 4 pole, 415 Volts with adjustable thermal and adjustable magnetic settings with extended copper terminals complete all as specified and as directed by Engineer-in-Charge. Make : Larsen &Toubro/ ABB/ Siemens/ Schneider/ Havells/ Legrand/ Indo ASIAN/ C & S Electric/ Bhartia Cuttler Hammer (BCH)/Benlo | 1 | EACH | |||||||||||||||||||||||||||||||||||||||
| 28 | Material and labour for straight Through Heat shrinkable type Cable Joint Kit including Jointing Materials for making Joints of LT UG Electric Cable 1100 Volt Grade Heavy Duty with XLPE insulated Aluminium Stranded Conductor of size 25 to 50 Sqmm x 3½ Core and Testing complete all as specified and as directed. Make: Densons/ M Seal/ Raychem/ Siemens / Birla 3M/ Mahindra & Mahindra | 4.00 | EACH | 10.00 | Excess(+) | 1 | Full Conversion | INR | 0.00 | 0.00 | INR Zero Only | 28 | Material and labour for straight Through Heat shrinkable type Cable Joint Kit including Jointing Materials for making Joints of LT UG Electric Cable 1100 Volt Grade Heavy Duty with XLPE insulated Aluminium Stranded Conductor of size 25 to 50 Sqmm x 3½ Core and Testing complete all as specified and as directed. Make: Densons/ M Seal/ Raychem/ Siemens / Birla 3M/ Mahindra & Mahindra | 4 | EACH | |||||||||||||||||||||||||||||||||||||||
| 29 | Material and labour for straight Through Heat shrinkable type Cable Joint Kit including Jointing Materials for making Joints of LT UG Electric Cable 1100 Volt Grade Heavy Duty with XLPE insulated Aluminium Stranded Conductor of size 70 to 120 Sqmm x 3½ Core and Testing complete all as specified and as directed. Make: Densons/ M Seal/ Raychem/ Siemens / Birla 3M/ Mahindra & Mahindra | 4.00 | EACH | 10.00 | Excess(+) | 1 | Full Conversion | INR | 0.00 | 0.00 | INR Zero Only | 29 | Material and labour for straight Through Heat shrinkable type Cable Joint Kit including Jointing Materials for making Joints of LT UG Electric Cable 1100 Volt Grade Heavy Duty with XLPE insulated Aluminium Stranded Conductor of size 70 to 120 Sqmm x 3½ Core and Testing complete all as specified and as directed. Make: Densons/ M Seal/ Raychem/ Siemens / Birla 3M/ Mahindra & Mahindra | 4 | EACH | |||||||||||||||||||||||||||||||||||||||
| 30 | Material and labour for straight Through Heat shrinkable type Cable Joint Kit including Jointing Materials for making Joints of LT UG Electric Cable 1100 Volt Grade Heavy Duty with XLPE insulated Aluminium Stranded Conductor of size 24 to 300 Sqmm x 3½ Core and Testing complete all as specified and as directed. Make: Densons/ M Seal/ Raychem/ Siemens / Birla 3M/ Mahindra & Mahindra | 2.00 | EACH | 10.00 | Excess(+) | 1 | Full Conversion | INR | 0.00 | 0.00 | INR Zero Only | 30 | Material and labour for straight Through Heat shrinkable type Cable Joint Kit including Jointing Materials for making Joints of LT UG Electric Cable 1100 Volt Grade Heavy Duty with XLPE insulated Aluminium Stranded Conductor of size 24 to 300 Sqmm x 3½ Core and Testing complete all as specified and as directed. Make: Densons/ M Seal/ Raychem/ Siemens / Birla 3M/ Mahindra & Mahindra | 2 | EACH | |||||||||||||||||||||||||||||||||||||||
| 31 | Refixing of old serviceable , MCCBs at any location with necessary acessories Screws,Nuts etc, all as specified and directed by Engr-in-Charge. Note-: Rate inclusive of Necessary lugs of respective size of cable is deemed to be included by the contractor. | 10.00 | EACH | 100.00 | Excess(+) | 1 | Full Conversion | INR | 0.00 | 0.00 | INR Zero Only | 31 | Refixing of old serviceable , MCCBs at any location with necessary acessories Screws,Nuts etc, all as specified and directed by Engr-in-Charge. Note-: Rate inclusive of Necessary lugs of respective size of cable is deemed to be included by the contractor. | 10 | EACH | |||||||||||||||||||||||||||||||||||||||
| 32 | Supply and Fix in repairs low voltage standard duty Power capacitors of 25 KVAR , 3 phase. suitable for 440 Volt AC,3 phase ,50 Hz confirming to IS:13340-1993, having life expectancy upto 1000000 hrs, self healing type, Standard Duty box type capacitors, should be inbuilt over pressure disconnector, shock hazard protected terminals complete all as specified and as directed. Make: L&T / Havells / Schneider / ABB / Legrand / Siemens / Epcos/ GE | 4.00 | EACH | 100.00 | Excess(+) | 1 | Full Conversion | INR | 0.00 | 0.00 | INR Zero Only | 32 | Supply and Fix in repairs low voltage standard duty Power capacitors of 25 KVAR , 3 phase. suitable for 440 Volt AC,3 phase ,50 Hz confirming to IS:13340-1993, having life expectancy upto 1000000 hrs, self healing type, Standard Duty box type capacitors, should be inbuilt over pressure disconnector, shock hazard protected terminals complete all as specified and as directed. Make: L&T / Havells / Schneider / ABB / Legrand / Siemens / Epcos/ GE | 4 | EACH | |||||||||||||||||||||||||||||||||||||||
| 33 | All as per item No 32 described here-in-before but of capacity 10 KVAR, 3 phase | 5.00 | EACH | 10.00 | Excess(+) | 1 | Full Conversion | INR | 0.00 | 0.00 | INR Zero Only | 33 | All as per item No 32 described here-in-before but of capacity 10 KVAR, 3 phase | 5 | EACH | |||||||||||||||||||||||||||||||||||||||
| 34 | All as per item No 32 described here-in-before but of capacity 5 KVAR, 3 phase | 1.00 | EACH | 10.00 | Excess(+) | 1 | Full Conversion | INR | 0.00 | 0.00 | INR Zero Only | 34 | All as per item No 32 described here-in-before but of capacity 5 KVAR, 3 phase | 1 | EACH | |||||||||||||||||||||||||||||||||||||||
| 35 | All as per item No 32 described here-in-before but of capacity 7.5 KVAR, 3 phase | 1.00 | EACH | 10.00 | Excess(+) | 1 | Full Conversion | INR | 0.00 | 0.00 | INR Zero Only | 35 | All as per item No 32 described here-in-before but of capacity 7.5 KVAR, 3 phase | 1 | EACH | |||||||||||||||||||||||||||||||||||||||
| 36 | All as per item No 32 described here-in-before but of capacity 3 KVAR, 3 phase | 1.00 | EACH | 10.00 | Excess(+) | 1 | Full Conversion | INR | 0.00 | 0.00 | INR Zero Only | 36 | All as per item No 32 described here-in-before but of capacity 3 KVAR, 3 phase | 1 | EACH | |||||||||||||||||||||||||||||||||||||||
| 37 | All as per item No 32 described here-in-before but of capacity 2 KVAR, 3 phase | 1.00 | EACH | 10.00 | Excess(+) | 1 | Full Conversion | INR | 0.00 | 0.00 | INR Zero Only | 37 | All as per item No 32 described here-in-before but of capacity 2 KVAR, 3 phase | 1 | EACH | |||||||||||||||||||||||||||||||||||||||
| 38 | Supply and fix , Current Transformer of ratio 400/5A with frequency 50Hz, class 1.0 voltage ranging upto 660 Volts, having long life expectancy, shock hazard including taking down old unserviceable Current Transformer complete all as specified and directed by Engr-in-Charge. Make- Schneider, L&T, Siemens, AE, Crompton Greeves, Mumbai | 4.00 | EACH | 10.00 | Excess(+) | 1 | Full Conversion | INR | 0.00 | 0.00 | INR Zero Only | 38 | Supply and fix , Current Transformer of ratio 400/5A with frequency 50Hz, class 1.0 voltage ranging upto 660 Volts, having long life expectancy, shock hazard including taking down old unserviceable Current Transformer complete all as specified and directed by Engr-in-Charge. Make- Schneider, L&T, Siemens, AE, Crompton Greeves, Mumbai | 4 | EACH | |||||||||||||||||||||||||||||||||||||||
| 39 | Supply and fix , Current Transformer of ratio 800/5A with frequency 50Hz, class 1.0 voltage ranging upto 660 Volts, having long life expectancy, shock hazard including taking down old unserviceable Current Transformer complete all as specified and directed by Engr-in-Charge. Make- Schneider, L&T, Siemens, AE, Crompton Greeves, Mumbai | 5.00 | EACH | 10.00 | Excess(+) | 1 | Full Conversion | INR | 0.00 | 0.00 | INR Zero Only | 39 | Supply and fix , Current Transformer of ratio 800/5A with frequency 50Hz, class 1.0 voltage ranging upto 660 Volts, having long life expectancy, shock hazard including taking down old unserviceable Current Transformer complete all as specified and directed by Engr-in-Charge. Make- Schneider, L&T, Siemens, AE, Crompton Greeves, Mumbai | 5 | EACH | |||||||||||||||||||||||||||||||||||||||
| 40 | Supply and fix , Current Transformer of ratio 200-250/5A with frequency 50Hz, class 1.0 voltage ranging upto 660 Volts, having long life expectancy, shock hazard including taking down old unserviceable Current Transformer complete all as specified and directed by Engr-in-Charge. Make- Schneider, L&T, Siemens, AE, Crompton Greeves, Mumbai | 4.00 | EACH | 10.00 | Excess(+) | 1 | Full Conversion | INR | 0.00 | 0.00 | INR Zero Only | 40 | Supply and fix , Current Transformer of ratio 200-250/5A with frequency 50Hz, class 1.0 voltage ranging upto 660 Volts, having long life expectancy, shock hazard including taking down old unserviceable Current Transformer complete all as specified and directed by Engr-in-Charge. Make- Schneider, L&T, Siemens, AE, Crompton Greeves, Mumbai | 4 | EACH | |||||||||||||||||||||||||||||||||||||||
| 41 | Decarbonising of LT panel board/ Feeder pillar boxes by CTC (Carbon Tetra Chloride) removing the carbon deposited inside the panel, cleaning the panel with cotton waste, applying one coat of becktol red solution, checking the fault inside the panel board, charging the LT panel post completion of decarbonisation complete all as specified and directed by Engr-in-charge. Note : a) Proper shut down shall be taken prior the commencement of work . b) Contractor shall provide CTC Cotton waste and Dr Bectol solution for performing the decarbonisation. c) Fabrication of LT Panels for broken hinges shall be rectified. d) Painting the LT Panel with synthetic enamel paint ( 2 coats) over one coat of red oxide ( 1 coat) | 15.00 | EACH JOB | 10.00 | Excess(+) | 1 | Full Conversion | INR | 0.00 | 0.00 | INR Zero Only | 41 | Decarbonising of LT panel board/ Feeder pillar boxes by CTC (Carbon Tetra Chloride) removing the carbon deposited inside the panel, cleaning the panel with cotton waste, applying one coat of becktol red solution, checking the fault inside the panel board, charging the LT panel post completion of decarbonisation complete all as specified and directed by Engr-in-charge. Note : a) Proper shut down shall be taken prior the commencement of work . b) Contractor shall provide CTC Cotton waste and Dr Bectol solution for performing the decarbonisation. c) Fabrication of LT Panels for broken hinges shall be rectified. d) Painting the LT Panel with synthetic enamel paint ( 2 coats) over one coat of red oxide ( 1 coat) | 15 | EACH JOB | |||||||||||||||||||||||||||||||||||||||
| 42 | Material & Labour for cleaning of E/M installations / campus by deploying 2 Nos labour in each installation, surface dressing, cutting/ dressing of natural grass from ground to remove small unequalities n.exc 15 cm deep ( including removing vegetation / shrubs / brush wood / under-growth ), cleaning of drains & carrying away the rubbish to a distance of n.exc 50 mtr away with the area of installation up to 700sqm and cleaning shall be carried out at least 2 times in each installation at a interval of 3 months complete all as specified and directed by Engr-in-charge. | 14.00 | EACH JOB | 10.00 | Excess(+) | 1 | Full Conversion | INR | 0.00 | 0.00 | INR Zero Only | 42 | Material & Labour for cleaning of E/M installations / campus by deploying 2 Nos labour in each installation, surface dressing, cutting/ dressing of natural grass from ground to remove small unequalities n.exc 15 cm deep ( including removing vegetation / shrubs / brush wood / under-growth ), cleaning of drains & carrying away the rubbish to a distance of n.exc 50 mtr away with the area of installation up to 700sqm and cleaning shall be carried out at least 2 times in each installation at a interval of 3 months complete all as specified and directed by Engr-in-charge. | 14 | EACH JOB | |||||||||||||||||||||||||||||||||||||||
| 43 | Supply and fix in replacement of multifunctional meter in existing panel/ feeder 3 phase 4 wire CT operated with necessary CT copper wournt out of rating 300/5 Amps for 3 phase, 15 VA, Class-I accuracy suitable for recording KWH, KVA, KW, kVAh, PF etc, flush mounted 96x96mm, input voltage measurement range 50-520 VAC, including necessary wiring for connections complete all as specified and directed by Engr-in-Charge. Make: L&T Cat No. WL4405110000 / Automatic Electrical (AE)/ Havells/ Enercon/ Secure Meter | 5.00 | EACH | 10.00 | Excess(+) | 1 | Full Conversion | INR | 0.00 | 0.00 | INR Zero Only | 43 | Supply and fix in replacement of multifunctional meter in existing panel/ feeder 3 phase 4 wire CT operated with necessary CT copper wournt out of rating 300/5 Amps for 3 phase, 15 VA, Class-I accuracy suitable for recording KWH, KVA, KW, kVAh, PF etc, flush mounted 96x96mm, input voltage measurement range 50-520 VAC, including necessary wiring for connections complete all as specified and directed by Engr-in-Charge. Make: L&T Cat No. WL4405110000 / Automatic Electrical (AE)/ Havells/ Enercon/ Secure Meter | 5 | EACH | |||||||||||||||||||||||||||||||||||||||
| 44 | Refixing / relaying of existing disturbed / uprooted existing LT electric cable of size upto 300 Sqmm to the existing places like uprooted from ground or out with the steel saddles from ground level to four storey bldg distribution box,etc complete with using electric drill machine, nut & bolt and proper grouted including excavation and returning and filling complete all as specified and directed by Engr-in-Charge. | 150.00 | RUNNING METRE | 10.00 | Excess(+) | 1 | Full Conversion | INR | 0.00 | 0.00 | INR Zero Only | 44 | Refixing / relaying of existing disturbed / uprooted existing LT electric cable of size upto 300 Sqmm to the existing places like uprooted from ground or out with the steel saddles from ground level to four storey bldg distribution box,etc complete with using electric drill machine, nut & bolt and proper grouted including excavation and returning and filling complete all as specified and directed by Engr-in-Charge. | 150 | RUNNING METRE | |||||||||||||||||||||||||||||||||||||||
| 45 | Supply and fix aluminium thimble (Lugs) in replacement suitable for Cable of size upto 400sqmm, including taking down burnt / unserviceable lugs from the LT Panel board complete all as specified and directed by Engr-in-Charge. Make : Dowells | 50.00 | EACH | 10.00 | Excess(+) | 1 | Full Conversion | INR | 0.00 | 0.00 | INR Zero Only | 45 | Supply and fix aluminium thimble (Lugs) in replacement suitable for Cable of size upto 400sqmm, including taking down burnt / unserviceable lugs from the LT Panel board complete all as specified and directed by Engr-in-Charge. Make : Dowells | 50 | EACH | |||||||||||||||||||||||||||||||||||||||
| 46 | Material and labour for welding broken doors of LT Panels (front and rear door) including replacing the required new hinges, nuts and bolts, locking arrangement and refixing the covers without disturbing the existing electric system complete all as specified and directed by Engr-in-Charge. | 12.00 | EACH JOB | 100.00 | Excess(+) | 1 | Full Conversion | INR | 0.00 | 0.00 | INR Zero Only | 46 | Material and labour for welding broken doors of LT Panels (front and rear door) including replacing the required new hinges, nuts and bolts, locking arrangement and refixing the covers without disturbing the existing electric system complete all as specified and directed by Engr-in-Charge. | 12 | EACH JOB | |||||||||||||||||||||||||||||||||||||||
| 47 | Material and labour for laying crushed stone for all sides of LT Panel not less than 0.5 mtr by spreading first layer of smaller aggregate and compacting it to a thickness of about 40mm and spreading second layer of mix 50mm and 25mm stone aggregate in a ratio of 2:1 and spread them uniformaly with compacted layer to thickness of about 60mm and sorrunded it from all sides using PCC covers complete all as specified and as directed by Engineer-in-Charge. | 30.00 | EACH JOB | 100.00 | Excess(+) | 1 | Full Conversion | INR | 0.00 | 0.00 | INR Zero Only | 47 | Material and labour for laying crushed stone for all sides of LT Panel not less than 0.5 mtr by spreading first layer of smaller aggregate and compacting it to a thickness of about 40mm and spreading second layer of mix 50mm and 25mm stone aggregate in a ratio of 2:1 and spread them uniformaly with compacted layer to thickness of about 60mm and sorrunded it from all sides using PCC covers complete all as specified and as directed by Engineer-in-Charge. | 30 | EACH JOB | |||||||||||||||||||||||||||||||||||||||
| 48 | Material and labour for cleaning the area from all sides of LT Panel approx 1 mtr each side by removing all grass, weeds, roots and other materials and applying chemical for treatment to prevent future growth of weeds and grass complete all as specified and as directed by Engineer-in-Charge. | 30.00 | EACH JOB | 10.00 | Excess(+) | 1 | Full Conversion | INR | 0.00 | 0.00 | INR Zero Only | 48 | Material and labour for cleaning the area from all sides of LT Panel approx 1 mtr each side by removing all grass, weeds, roots and other materials and applying chemical for treatment to prevent future growth of weeds and grass complete all as specified and as directed by Engineer-in-Charge. | 30 | EACH JOB | |||||||||||||||||||||||||||||||||||||||
| 49 | Material & Labour for feeder piller box outdoor type double door, vermin and weather proof of over all dimension (1.0x0.80x0.50) meter made out of 3 mm thick CRCA sheet including canopy type roof 15 cm extended in all side and two part hinged door in front sides with locking arrangement and gasket arrangement with one Nos pad lock of 7 lever and three Nos keys and back side fixed with nuts & guskets, including provision of one set of bus bar (4 Nos. aluminum strip of size 50mmx10mm ) as outgoing fixed on porcelain insulator and provision of cable gland for cable entry including two coat of powder coated paint complete and installation on PCC foundation all as directed including provision of following parameters:- (a) 1 number of incoming MCCBs 250 Amps, 36 KA, 4 pole, 415 Volts with adjustable thermal and adjustable magnetic settings with extended copper terminals, suitable size aluminium connection busbers covered with PVC sleeves out going sides of MCCB's inside the feeder piller box, all as directed as per site requirement. (b) Aluminium bus bar duly covered with colour coded shrinkable sleeves of required size for Phases and neutral - 01 set (c) Panel shall be Manufactured from CPRI approved manufacturer and Drawing for Feeder pillar box shall be first approval by Engr-in-Charge | 1.00 | EACH | 10.00 | Excess(+) | 1 | Full Conversion | INR | 0.00 | 0.00 | INR Zero Only | 49 | Material & Labour for feeder piller box outdoor type double door, vermin and weather proof of over all dimension (1.0x0.80x0.50) meter made out of 3 mm thick CRCA sheet including canopy type roof 15 cm extended in all side and two part hinged door in front sides with locking arrangement and gasket arrangement with one Nos pad lock of 7 lever and three Nos keys and back side fixed with nuts & guskets, including provision of one set of bus bar (4 Nos. aluminum strip of size 50mmx10mm ) as outgoing fixed on porcelain insulator and provision of cable gland for cable entry including two coat of powder coated paint complete and installation on PCC foundation all as directed including provision of following parameters:- (a) 1 number of incoming MCCBs 250 Amps, 36 KA, 4 pole, 415 Volts with adjustable thermal and adjustable magnetic settings with extended copper terminals, suitable size aluminium connection busbers covered with PVC sleeves out going sides of MCCB's inside the feeder piller box, all as directed as per site requirement. (b) Aluminium bus bar duly covered with colour coded shrinkable sleeves of required size for Phases and neutral - 01 set (c) Panel shall be Manufactured from CPRI approved manufacturer and Drawing for Feeder pillar box shall be first approval by Engr-in-Charge | 1 | EACH | |||||||||||||||||||||||||||||||||||||||
| 50 | Supply, install, testing & commissioning pedestal cubical type double door LT feeder piller box factory made modular construction fabricated out of 3 mm thick CRCA sheet, angle iron, channels, epoxy powder coated to give a superior finish , outdoor type , totally enclosed dust & vermin proof with locking arrangements (compartment wise) front & back side opening system including rain shed, Overall size of each incoming & outgoing modules should not less than (350mmx350mmx550mm). and busbar chamber should be suitable for accomodating all Aluminium bus bar strips (50mm x 10mm x 04 Nos) fixed on porcelain insulators, and one independent metering module suitable for accomodating three phase volt meters & ammeter digital type, indicator lamps, cable entry/exits cut outs at bottom or upper part as mentioned below, complete electrically inter connected with Aluminium strips of suitablesize for all incoming and outgoing MCCBs and accessories with fixing arrangement on PCC (1:3:6) type C-2 bed block with studs, bolts, nuts & washers, Danger notyice board with scull suitable for 415 volts or required size to be fixed on Pannel and consisting of the following accessories including dismantling of old panel all as directed. (a) Panel shall be Manufactured from CPRI approved manufacturer and Drawing for Feeder pillar box shall be first approval by Engr-in-Charge (b) Aluminium bus bar duly covered with colour coded shrinkable sleeves of required size for Phases and neutral - 01 set (c) Digital multifunction meter of size 96x96 mm to measure current, voltage, frequency and power factor with built in selector switch and programable CT of appropriate ratio.-01 No Make-L&T / Automatic Electrical (AE)/ Havells/ Enercon/ Secure Meter (d) Panel indicating lamp neon/LED type (Red ,Yellow & Blue) with lamp holders - 03 Nos (d) Panel instrumental wiring with FRLS suitable size but not less than 2.5 sqmm copper wire single core - 01 Job (e) Necessary sizes of lugs for fixing of cables in bus bar deemded to be included rate quoted by the contractor- 01 Job (f) All incoming/ outgoing feeders to be marked with suitable size of stencils as directed. | 1.00 | EACH | 10.00 | Excess(+) | 1 | Full Conversion | INR | 0.00 | 0.00 | INR Zero Only | 50 | Supply, install, testing & commissioning pedestal cubical type double door LT feeder piller box factory made modular construction fabricated out of 3 mm thick CRCA sheet, angle iron, channels, epoxy powder coated to give a superior finish , outdoor type , totally enclosed dust & vermin proof with locking arrangements (compartment wise) front & back side opening system including rain shed, Overall size of each incoming & outgoing modules should not less than (350mmx350mmx550mm). and busbar chamber should be suitable for accomodating all Aluminium bus bar strips (50mm x 10mm x 04 Nos) fixed on porcelain insulators, and one independent metering module suitable for accomodating three phase volt meters & ammeter digital type, indicator lamps, cable entry/exits cut outs at bottom or upper part as mentioned below, complete electrically inter connected with Aluminium strips of suitablesize for all incoming and outgoing MCCBs and accessories with fixing arrangement on PCC (1:3:6) type C-2 bed block with studs, bolts, nuts & washers, Danger notyice board with scull suitable for 415 volts or required size to be fixed on Pannel and consisting of the following accessories including dismantling of old panel all as directed. (a) Panel shall be Manufactured from CPRI approved manufacturer and Drawing for Feeder pillar box shall be first approval by Engr-in-Charge (b) Aluminium bus bar duly covered with colour coded shrinkable sleeves of required size for Phases and neutral - 01 set (c) Digital multifunction meter of size 96x96 mm to measure current, voltage, frequency and power factor with built in selector switch and programable CT of appropriate ratio.-01 No Make-L&T / Automatic Electrical (AE)/ Havells/ Enercon/ Secure Meter (d) Panel indicating lamp neon/LED type (Red ,Yellow & Blue) with lamp holders - 03 Nos (d) Panel instrumental wiring with FRLS suitable size but not less than 2.5 sqmm copper wire single core - 01 Job (e) Necessary sizes of lugs for fixing of cables in bus bar deemded to be included rate quoted by the contractor- 01 Job (f) All incoming/ outgoing feeders to be marked with suitable size of stencils as directed. | 1 | EACH | |||||||||||||||||||||||||||||||||||||||
| 50.1 | Incoming- (a) MCCB 4 pole ,Ics=100%Icu- 35/36 KA, 415 Volts, 400 Amps , with thermal adjustable and fixed magnetic setting with extended terminals - 01 No Outgoing :- (a) MCCB 4 pole ,Ics=100%Icu- 35/36 KA, 415 Volts, 200 Amps , with thermal adjustable and fixed magnetic setting with extended terminals - 01 No (b) MCCB 4 pole ,Ics=100%Icu- 25/26 KA, 415 Volts, 100 Amps , with thermal adjustable and fixed magnetic setting with extended terminals - 01 No Make of MCCB: Larsen &Toubro/ ABB/ Siemens/ Schneider/ Havells/ Legrand/ Indo ASIAN/ C & S Electric/ Bhartia Cuttler Hammer (BCH) | 50.1 | Incoming- (a) MCCB 4 pole ,Ics=100%Icu- 35/36 KA, 415 Volts, 400 Amps , with thermal adjustable and fixed magnetic setting with extended terminals - 01 No Outgoing :- (a) MCCB 4 pole ,Ics=100%Icu- 35/36 KA, 415 Volts, 200 Amps , with thermal adjustable and fixed magnetic setting with extended terminals - 01 No (b) MCCB 4 pole ,Ics=100%Icu- 25/26 KA, 415 Volts, 100 Amps , with thermal adjustable and fixed magnetic setting with extended terminals - 01 No Make of MCCB: Larsen &Toubro/ ABB/ Siemens/ Schneider/ Havells/ Legrand/ Indo ASIAN/ C & S Electric/ Bhartia Cuttler Hammer (BCH) | |||||||||||||||||||||||||||||||||||||||||||||||||||
| 51 | Material and labour for shifting of LT panel from any type of location to any desired location complete with fixing arrangement on PCC (1:3:6) type C-2 bed block with studs, bolts, nuts & washers, lugs of required size to be fixed including connection for all cables of any size complete all as specified and directed by Engr-in Charge. Note: Panel to be shifted from COD Kandivali to HBTC Marve and COD Malad or any location. | 3.00 | EACH JOB | 10.00 | Excess(+) | 1 | Full Conversion | INR | 0.00 | 0.00 | INR Zero Only | 51 | Material and labour for shifting of LT panel from any type of location to any desired location complete with fixing arrangement on PCC (1:3:6) type C-2 bed block with studs, bolts, nuts & washers, lugs of required size to be fixed including connection for all cables of any size complete all as specified and directed by Engr-in Charge. Note: Panel to be shifted from COD Kandivali to HBTC Marve and COD Malad or any location. | 3 | EACH JOB | |||||||||||||||||||||||||||||||||||||||
| 52 | Supply, install, testing & commissioning wall/Floor mounted cubical type double door LT feeder piller box factory made modular construction fabricated out of 2 mm thick CRCA sheet, epoxy powder coated to give a superior finish , indoor type , totally enclosed dust & vermin proof with locking arrangements (compartment wise) front side opening system Overall size of each incoming & outgoing modules should not less than (350mmx350mmx550mm). and busbar chamber should be suitable for accomodating all Aluminium bus bar strips (40mm x 10mm x 04 Nos) duly covered by PVC sleeves fixed on porcelain insulators, and one independent metering module suitable for accomodating indicator lamps, cable entry/exits cut outs at bottom part as mentioned below, complete electrically inter connected suitable size for all incoming and outgoing MCBs and accessories with fixing arrangement on wall with bolts, nuts & washers, Danger notice board with scull suitable for 415 volts or required size to be fixed on Pannel and consisting of the following accessories including dismantling of old panel all as directed. (a) Panel shall be Manufactured from CPRI approved manufacturer and Drawing for Feeder pillar box shall be first approval by Engr-in-Charge (b) Aluminium bus bar duly covered with colour coded shrinkable sleeves of required size for Phases and neutral - 01 set (c) Digital multifunction meter of size 96x96 mm to measure current, voltage, frequency and power factor with built in selector switch and programable CT of appropriate ratio.-01 No Make-L&T / Automatic Electrical (AE)/ Havells/ Enercon/ Secure Meter (d) Panel indicating lamp neon/LED type (Red ,Yellow & Blue) with lamp holders - 03 Nos (d) Panel instrumental wiring with FRLS suitable size but not less than 2.5 sqmm copper wire single core - 01 Job (e) Necessary sizes of lugs for fixing of cables in bus bar deemded to be included rate quoted by the contractor- 01 Job (f) All incoming/ outgoing feeders to be marked with suitable size of stencils as directed. | 2.00 | EACH | 10.00 | Excess(+) | 1 | Full Conversion | INR | 0.00 | 0.00 | INR Zero Only | 52 | Supply, install, testing & commissioning wall/Floor mounted cubical type double door LT feeder piller box factory made modular construction fabricated out of 2 mm thick CRCA sheet, epoxy powder coated to give a superior finish , indoor type , totally enclosed dust & vermin proof with locking arrangements (compartment wise) front side opening system Overall size of each incoming & outgoing modules should not less than (350mmx350mmx550mm). and busbar chamber should be suitable for accomodating all Aluminium bus bar strips (40mm x 10mm x 04 Nos) duly covered by PVC sleeves fixed on porcelain insulators, and one independent metering module suitable for accomodating indicator lamps, cable entry/exits cut outs at bottom part as mentioned below, complete electrically inter connected suitable size for all incoming and outgoing MCBs and accessories with fixing arrangement on wall with bolts, nuts & washers, Danger notice board with scull suitable for 415 volts or required size to be fixed on Pannel and consisting of the following accessories including dismantling of old panel all as directed. (a) Panel shall be Manufactured from CPRI approved manufacturer and Drawing for Feeder pillar box shall be first approval by Engr-in-Charge (b) Aluminium bus bar duly covered with colour coded shrinkable sleeves of required size for Phases and neutral - 01 set (c) Digital multifunction meter of size 96x96 mm to measure current, voltage, frequency and power factor with built in selector switch and programable CT of appropriate ratio.-01 No Make-L&T / Automatic Electrical (AE)/ Havells/ Enercon/ Secure Meter (d) Panel indicating lamp neon/LED type (Red ,Yellow & Blue) with lamp holders - 03 Nos (d) Panel instrumental wiring with FRLS suitable size but not less than 2.5 sqmm copper wire single core - 01 Job (e) Necessary sizes of lugs for fixing of cables in bus bar deemded to be included rate quoted by the contractor- 01 Job (f) All incoming/ outgoing feeders to be marked with suitable size of stencils as directed. | 2 | EACH | |||||||||||||||||||||||||||||||||||||||
| 52.1 | Incoming- (a) MCCB 4 pole ,Ics=100%Icu- 25 KA, 415 Volts, 160 Amps , with thermal adjustable and fixed magnetic setting with extended terminals - 01 No Outgoing :- (a) MCB TPN, 415 Volts,10 KA, 63 Amps -02 Nos. (b) Star delta starter FSD 30 HP 3 Phase motor for open execuision in panel with push button switch ON/OFF indicator on door of each module with over load relay range 22A-32 A, suitable size of contactor and single phase protection relay- 2 Nos.Make-Havells/ Siemens/ Larsen &Tubro/ ABB/ Crompton Greaves/ GE (e) MDXL capacitor heavy duty 15 KVAR 3 phase 440 Volts Box type with capacitor duty contactor and 32 Amps TP MCB- 01 Set Make- L & T (f) MDXL capacitor heavy duty 5 KVAR 3 phase 440 Volts Box type with capacitor duty contactor and 32 Amps TP MCB- 01 Set Make- L & T (g) Inteligent automatic factor controller realy 6 pole voltage 220-440. Make : Runcon, Type- APFC Relay- )1 Nos (h) Digital Type Amphere meter 3 phase CT opearted with suitable size CTs-3 Nos for each meter complete all as directed- 04 Nos (make: L&T, cat Part-WL131010OOOO) (i) Multifunctional meter (VAF + PF meter) for main incoming- 01 Nos.( Make- L&T Cat Part- WL41010OOOO) Make of MCCB & MCB: Larsen &Toubro/ ABB/ Siemens/ Schneider/ Havells/ Legrand/ Indo ASIAN/ C & S Electric/ Bhartia Cuttler Hammer (BCH) | 52.1 | Incoming- (a) MCCB 4 pole ,Ics=100%Icu- 25 KA, 415 Volts, 160 Amps , with thermal adjustable and fixed magnetic setting with extended terminals - 01 No Outgoing :- (a) MCB TPN, 415 Volts,10 KA, 63 Amps -02 Nos. (b) Star delta starter FSD 30 HP 3 Phase motor for open execuision in panel with push button switch ON/OFF indicator on door of each module with over load relay range 22A-32 A, suitable size of contactor and single phase protection relay- 2 Nos.Make-Havells/ Siemens/ Larsen &Tubro/ ABB/ Crompton Greaves/ GE (e) MDXL capacitor heavy duty 15 KVAR 3 phase 440 Volts Box type with capacitor duty contactor and 32 Amps TP MCB- 01 Set Make- L & T (f) MDXL capacitor heavy duty 5 KVAR 3 phase 440 Volts Box type with capacitor duty contactor and 32 Amps TP MCB- 01 Set Make- L & T (g) Inteligent automatic factor controller realy 6 pole voltage 220-440. Make : Runcon, Type- APFC Relay- )1 Nos (h) Digital Type Amphere meter 3 phase CT opearted with suitable size CTs-3 Nos for each meter complete all as directed- 04 Nos (make: L&T, cat Part-WL131010OOOO) (i) Multifunctional meter (VAF + PF meter) for main incoming- 01 Nos.( Make- L&T Cat Part- WL41010OOOO) Make of MCCB & MCB: Larsen &Toubro/ ABB/ Siemens/ Schneider/ Havells/ Legrand/ Indo ASIAN/ C & S Electric/ Bhartia Cuttler Hammer (BCH) | |||||||||||||||||||||||||||||||||||||||||||||||||||
| 53 | Material & Labour for Cutting/ Trimming of trees of any height or any size inside Pump house/ Power house with the help of crane/ skilled woodcutter complete with removing all cutted trees outside the MD land, atleast two times in the interval of 3 months in each installation complete all as specified and directed by Engr-in-charge. | 12.00 | EACH JOB | 10.00 | Excess(+) | 1 | Full Conversion | INR | 0.00 | 0.00 | INR Zero Only | 53 | Material & Labour for Cutting/ Trimming of trees of any height or any size inside Pump house/ Power house with the help of crane/ skilled woodcutter complete with removing all cutted trees outside the MD land, atleast two times in the interval of 3 months in each installation complete all as specified and directed by Engr-in-charge. | 12 | EACH JOB | |||||||||||||||||||||||||||||||||||||||
| 54 | Supply, install, testing & commissioning pedestal cubical type double door LT feeder piller box factory made modular construction fabricated out of 3 mm thick CRCA sheet, angle iron, channels, epoxy powder coated to give a superior finish , outdoor type , totally enclosed dust & vermin proof with locking arrangements (compartment wise) front & back side opening system including rain shed, Overall size of each incoming & outgoing modules should not less than (350mmx350mmx550mm). and busbar chamber should be suitable for accomodating all Aluminium bus bar strips (50mm x 10mm x 04 Nos) fixed on porcelain insulators, and one independent metering module suitable for accomodating three phase volt meters & ammeter digital type, indicator lamps, cable entry/exits cut outs at bottom or upper part as mentioned below, complete electrically inter connected with Aluminium strips of suitablesize for all incoming and outgoing MCCBs and accessories with fixing arrangement on PCC (1:3:6) type C-2 bed block with studs, bolts, nuts & washers, Danger notyice board with scull suitable for 415 volts or required size to be fixed on Pannel and consisting of the following accessories including dismantling of old panel all as directed. (a) Panel shall be Manufactured from CPRI approved manufacturer and Drawing for Feeder pillar box shall be first approval by Engr-in-Charge (b) Aluminium bus bar duly covered with colour coded shrinkable sleeves of required size for Phases and neutral - 01 set (c) Digital multifunction meter of size 96x96 mm to measure current, voltage, frequency and power factor with built in selector switch and programable CT of appropriate ratio.-01 No Make-L&T / Automatic Electrical (AE)/ Havells/ Enercon/ Secure Meter (d) Panel indicating lamp neon/LED type (Red ,Yellow & Blue) with lamp holders - 03 Nos (d) Panel instrumental wiring with FRLS suitable size but not less than 2.5 sqmm copper wire single core - 01 Job (e) Necessary sizes of lugs for fixing of cables in bus bar deemded to be included rate quoted by the contractor- 01 Job (f) All incoming/ outgoing feeders to be marked with suitable size of stencils as directed. | 1.00 | EACH | 10.00 | Excess(+) | 1 | Full Conversion | INR | 0.00 | 0.00 | INR Zero Only | 54 | Supply, install, testing & commissioning pedestal cubical type double door LT feeder piller box factory made modular construction fabricated out of 3 mm thick CRCA sheet, angle iron, channels, epoxy powder coated to give a superior finish , outdoor type , totally enclosed dust & vermin proof with locking arrangements (compartment wise) front & back side opening system including rain shed, Overall size of each incoming & outgoing modules should not less than (350mmx350mmx550mm). and busbar chamber should be suitable for accomodating all Aluminium bus bar strips (50mm x 10mm x 04 Nos) fixed on porcelain insulators, and one independent metering module suitable for accomodating three phase volt meters & ammeter digital type, indicator lamps, cable entry/exits cut outs at bottom or upper part as mentioned below, complete electrically inter connected with Aluminium strips of suitablesize for all incoming and outgoing MCCBs and accessories with fixing arrangement on PCC (1:3:6) type C-2 bed block with studs, bolts, nuts & washers, Danger notyice board with scull suitable for 415 volts or required size to be fixed on Pannel and consisting of the following accessories including dismantling of old panel all as directed. (a) Panel shall be Manufactured from CPRI approved manufacturer and Drawing for Feeder pillar box shall be first approval by Engr-in-Charge (b) Aluminium bus bar duly covered with colour coded shrinkable sleeves of required size for Phases and neutral - 01 set (c) Digital multifunction meter of size 96x96 mm to measure current, voltage, frequency and power factor with built in selector switch and programable CT of appropriate ratio.-01 No Make-L&T / Automatic Electrical (AE)/ Havells/ Enercon/ Secure Meter (d) Panel indicating lamp neon/LED type (Red ,Yellow & Blue) with lamp holders - 03 Nos (d) Panel instrumental wiring with FRLS suitable size but not less than 2.5 sqmm copper wire single core - 01 Job (e) Necessary sizes of lugs for fixing of cables in bus bar deemded to be included rate quoted by the contractor- 01 Job (f) All incoming/ outgoing feeders to be marked with suitable size of stencils as directed. | 1 | EACH | |||||||||||||||||||||||||||||||||||||||
| 54.1 | Incoming- (a) MCCB 4 pole ,Ics=100%Icu- 35/36 KA, 415 Volts, 160 Amps , with thermal adjustable and fixed magnetic setting with extended terminals - 01 No Outgoing :- (a) MCCB 4 pole ,Ics=100%Icu- 16 KA, 415 Volts, 63 Amps , with thermal adjustable and fixed magnetic setting with extended terminals - 04 Nos Make of MCCB: Larsen &Toubro/ ABB/ Siemens/ Schneider/ Havells/ Legrand/ Indo ASIAN/ C & S Electric/ Bhartia Cuttler Hammer (BCH) | 54.1 | Incoming- (a) MCCB 4 pole ,Ics=100%Icu- 35/36 KA, 415 Volts, 160 Amps , with thermal adjustable and fixed magnetic setting with extended terminals - 01 No Outgoing :- (a) MCCB 4 pole ,Ics=100%Icu- 16 KA, 415 Volts, 63 Amps , with thermal adjustable and fixed magnetic setting with extended terminals - 04 Nos Make of MCCB: Larsen &Toubro/ ABB/ Siemens/ Schneider/ Havells/ Legrand/ Indo ASIAN/ C & S Electric/ Bhartia Cuttler Hammer (BCH) | |||||||||||||||||||||||||||||||||||||||||||||||||||
| 55 | Supply, install, testing & commissioning pedestal cubical type double door LT feeder piller box factory made modular construction fabricated out of 3 mm thick CRCA sheet, angle iron, channels, epoxy powder coated to give a superior finish , outdoor type , totally enclosed dust & vermin proof with locking arrangements (compartment wise) front & back side opening system including rain shed, Overall size of each incoming & outgoing modules should not less than (350mmx350mmx550mm). and busbar chamber should be suitable for accomodating all Aluminium bus bar strips (50mm x 10mm x 04 Nos) fixed on porcelain insulators, and one independent metering module suitable for accomodating three phase volt meters & ammeter digital type, indicator lamps, cable entry/exits cut outs at bottom or upper part as mentioned below, complete electrically inter connected with Aluminium strips of suitablesize for all incoming and outgoing MCCBs and accessories with fixing arrangement on PCC (1:3:6) type C-2 bed block with studs, bolts, nuts & washers, Danger notyice board with scull suitable for 415 volts or required size to be fixed on Pannel and consisting of the following accessories including dismantling of old panel all as directed. (a) Panel shall be Manufactured from CPRI approved manufacturer and Drawing for Feeder pillar box shall be first approval by Engr-in-Charge (b) Aluminium bus bar duly covered with colour coded shrinkable sleeves of required size for Phases and neutral - 01 set (c) Digital multifunction meter of size 96x96 mm to measure current, voltage, frequency and power factor with built in selector switch and programable CT of appropriate ratio.-01 No (d) Panel indicating lamp neon/LED type (Red ,Yellow & Blue) with lamp holders - 03 Nos (d) Panel instrumental wiring with FRLS suitable size but not less than 2.5 sqmm copper wire single core - 01 Job (e) Necessary sizes of lugs for fixing of cables in bus bar deemded to be included rate quoted by the contractor- 01 Job (f) All incoming/ outgoing feeders to be marked with suitable size of stencils as directed. | 1.00 | EACH | 10.00 | Excess(+) | 1 | Full Conversion | INR | 0.00 | 0.00 | INR Zero Only | 55 | Supply, install, testing & commissioning pedestal cubical type double door LT feeder piller box factory made modular construction fabricated out of 3 mm thick CRCA sheet, angle iron, channels, epoxy powder coated to give a superior finish , outdoor type , totally enclosed dust & vermin proof with locking arrangements (compartment wise) front & back side opening system including rain shed, Overall size of each incoming & outgoing modules should not less than (350mmx350mmx550mm). and busbar chamber should be suitable for accomodating all Aluminium bus bar strips (50mm x 10mm x 04 Nos) fixed on porcelain insulators, and one independent metering module suitable for accomodating three phase volt meters & ammeter digital type, indicator lamps, cable entry/exits cut outs at bottom or upper part as mentioned below, complete electrically inter connected with Aluminium strips of suitablesize for all incoming and outgoing MCCBs and accessories with fixing arrangement on PCC (1:3:6) type C-2 bed block with studs, bolts, nuts & washers, Danger notyice board with scull suitable for 415 volts or required size to be fixed on Pannel and consisting of the following accessories including dismantling of old panel all as directed. (a) Panel shall be Manufactured from CPRI approved manufacturer and Drawing for Feeder pillar box shall be first approval by Engr-in-Charge (b) Aluminium bus bar duly covered with colour coded shrinkable sleeves of required size for Phases and neutral - 01 set (c) Digital multifunction meter of size 96x96 mm to measure current, voltage, frequency and power factor with built in selector switch and programable CT of appropriate ratio.-01 No (d) Panel indicating lamp neon/LED type (Red ,Yellow & Blue) with lamp holders - 03 Nos (d) Panel instrumental wiring with FRLS suitable size but not less than 2.5 sqmm copper wire single core - 01 Job (e) Necessary sizes of lugs for fixing of cables in bus bar deemded to be included rate quoted by the contractor- 01 Job (f) All incoming/ outgoing feeders to be marked with suitable size of stencils as directed. | 1 | EACH | |||||||||||||||||||||||||||||||||||||||
| 55.1 | Incoming- (a) MCCB 4 pole ,Ics=100%Icu- 35/36 KA, 415 Volts, 400 Amps , with thermal adjustable and fixed magnetic setting with extended terminals - 01 No Outgoing :- (a) MCCB 4 pole ,Ics=100%Icu- 35/36 KA, 415 Volts, 320 Amps , with thermal adjustable and fixed magnetic setting with extended terminals - 01 No (a) MCCB 4 pole ,Ics=100%Icu- 25/26 KA, 415 Volts, 250 Amps , with thermal adjustable and fixed magnetic setting with extended terminals - 01 No Make of MCCB : Larsen &Toubro/ ABB/ Siemens/ Schneider/ Havells/ Legrand/ Indo ASIAN/ C & S Electric/ Bhartia Cuttler Hammer (BCH) | 55.1 | Incoming- (a) MCCB 4 pole ,Ics=100%Icu- 35/36 KA, 415 Volts, 400 Amps , with thermal adjustable and fixed magnetic setting with extended terminals - 01 No Outgoing :- (a) MCCB 4 pole ,Ics=100%Icu- 35/36 KA, 415 Volts, 320 Amps , with thermal adjustable and fixed magnetic setting with extended terminals - 01 No (a) MCCB 4 pole ,Ics=100%Icu- 25/26 KA, 415 Volts, 250 Amps , with thermal adjustable and fixed magnetic setting with extended terminals - 01 No Make of MCCB : Larsen &Toubro/ ABB/ Siemens/ Schneider/ Havells/ Legrand/ Indo ASIAN/ C & S Electric/ Bhartia Cuttler Hammer (BCH) | |||||||||||||||||||||||||||||||||||||||||||||||||||
| 56 | Note: Deduct Credit for demolished / dismantled material of Rs. (-) 1,17,695.00 (Minus) as listed in Schedule of Credit. Tenderers will not quote against this item being a tentative amount to be considered to arrive at the 'Contract Sum' | 56 | Note: Deduct Credit for demolished / dismantled material of Rs. (-) 1,17,695.00 (Minus) as listed in Schedule of Credit. Tenderers will not quote against this item being a tentative amount to be considered to arrive at the 'Contract Sum' | |||||||||||||||||||||||||||||||||||||||||||||||||||
| Total in Figures | 0.00 | 0.00 | INR Zero Only | |||||||||||||||||||||||||||||||||||||||||||||||||||
| Quoted Rate in Figures | Select | 0.0000 | 0.0000 | Zero Only | ||||||||||||||||||||||||||||||||||||||||||||||||||
| Quoted Rate in Words | INR Zero Only |
Andaman & Nicobar Tenders |Andhra Pradesh Tenders |Arunachal Pradesh Tenders |Assam Tenders |Bihar Tenders |Chandigarh Tenders |Chhattisgarh Tenders |Dadra & Nagar Haveli Tenders |Daman & Diu Tenders |Delhi Tenders |Goa Tenders |Gujarat Tenders |Haryana Tenders |Himachal Pradesh Tenders |Jammu & Kashmir Tenders |Jharkhand Tenders |Karnataka Tenders |Kerala Tenders |Ladakh Tenders |Lakshadweep Tenders |Madhya Pradesh Tenders |Maharashtra Tenders |Manipur Tenders |Meghalaya Tenders |Mizoram Tenders |Nagaland Tenders |Odisha Tenders |Pondicherry Tenders |Punjab Tenders |Rajasthan Tenders |Sikkim Tenders |Tamil Nadu Tenders |Telangana Tenders |Tripura Tenders |Uttarakhand Tenders |Uttar Pradesh Tenders |West Bengal Tenders |