Bidhelp
E-IN-C BRANCH - MILITARY ENGINEER SERVICES||CE WC AND CE JALANDHAR ZONE - MES||CWE AMRITSAR - MES||GE GURDASPUR - MES
E-IN-C BRANCH - MILITARY ENGINEER SERVICES||CE WC AND CE JALANDHAR ZONE - MES||CWE AMRITSAR - MES||GE GURDASPUR - MES
Garrison Engineer, Gurdaspur.
Punjab QTY :

Items - Provn of RCC drain water drainage in front of new KLP at Tibri Mil Stn Gurdaspur.

Tender Details
Costs
Documents
BOQ

BoQ1

Item Rate BoQ
BoQ_Ver3.0Item RateNormalINR OnlyINR
Select, Excess (+), Less (-)Less (-)
Tender Inviting Authority: Garrison Engineer Gurdaspur
Name of Work: Provn of RCC drain water drainage in front of new KLP at Tibri Mil Stn Gurdaspur.
Contract No: GE GSR-65/2025-2026
Name of the Bidder/ Bidding Firm / Company :
PRICE SCHEDULE (This BOQ template must not be modified/replaced by the bidder and the same should be uploaded after filling the relevent columns, else the bidder is liable to be rejected for this tender. Bidders are allowed to enter the Bidder Name and Values only )
Sl. No.Item DescriptionItem Code / MakeQuantityUnitsEstimated Rate in Rs. PAddition / DeductionAddition / Deduction ValuesCurrency Convertion against each ItemQuoted Currency in INR / Other CurrencyBASIC RATE In Figures To be entered by the Bidder Rs. P Excise DutyVATFreight Charges ( Unloading & Stacking)Any Other Taxes/Duties/LeviesOther Taxes 2IIIrd Party i.e DGS&D / RITES etc Inspection Charges @0.34%+Service TaxLess for Cenvat Credit,if any respect of Supplies Under full Excise Duty Category TOTAL AMOUNT Without Taxes in Rs. PTOTAL AMOUNT With TaxesTOTAL AMOUNT In Words
12334578910111251415161718192021222324252627282930313233343536373839404142434445464748495051526547
1.00Excavation in trenches n.exc. 1.5 mtr in depth and not exc 1.5 mtr wide for foundation etc for shafts, wells, cesspits, manholes, pier holes etc not exc 10 sqm on plan and not exc 1.5 mtr in depth and getting out in soft/ loose soil complete all as specified and directed.594.00CumExcess(+)1Full ConversionINR0.000.00INR Zero Only1Construction of chamber for 100mm sluices valveitem1101 Nos
2.00M&L for PCC 1:3:6 type C-2 (using 40 mm graded crushed stone aggregate) as in foundation, filling and mass concrete complete all as directed.54.00CumExcess(+)1Full ConversionINR0.000.00INR Zero Only1Construction of chamber for 100mm sluices valveitem1101 Nos
3.00M&L for Use and waste of form work to sides of concrete foundation, footings, bases of columns, raft beams, sides and soffits of foundation and plinth beams and similar work, vertical or to batter for rough finished surfaces or concrete, flat complete all as specified and directed.120.00SqmExcess(+)1Full ConversionINR0.000.00INR Zero Only1Construction of chamber for 100mm sluices valveitem1101 Nos
4.00M&L for formwork to faces of walls, retaining walls, abutments, parapets and similar work including attached pilaster, buttresses etc vertical or to batter complete all as specified and directed.640.00SqmExcess(+)1Full ConversionINR0.000.00INR Zero Only1Construction of chamber for 100mm sluices valveitem1101 Nos
5.00M&L for RCC M-25 design mix (using 20mm graded crushed stone aggregate) as in foundations, foundation beams, plinth beams, bases for columns etc complete all as specified and directed.81.00CumExcess(+)1Full ConversionINR0.000.00INR Zero Only1Construction of chamber for 100mm sluices valveitem1101 Nos
6.00M&L for RCC M-25 design mix (using 20mm graded crushed stone aggregate) as in walls, retaining walls, basement walls and the like any thickness above top of footing including attached pilaster and buttresses complete all as specified and directed.106.00CumExcess(+)1Full ConversionINR0.000.00INR Zero Only1Construction of chamber for 100mm sluices valveitem1101 Nos
7.00S&F mild steel TMT bars 10mm dia and over, cut to length, bent to shape required including cranking, bending spirally for hooping for columns, hooking ends and binding with the including mild steel wire ( annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.28260.00KgExcess(+)1Full ConversionINR0.000.00INR Zero Only1Construction of chamber for 100mm sluices valveitem1101 Nos
8.00Returning, filling in spreading, levelling, watering and well ramming in layers not exc 25cm complete all as specified and directed.170.00CumExcess(+)1Full ConversionINR0.000.00INR Zero Only1Construction of chamber for 100mm sluices valveitem1101 Nos
9.00Removing excavated material to a distance exc. 250m but not exc 500m and depositing where directed at a level not exc. 1.5m above the starting point complete all as specified and directed.424.00CumExcess(+)1Full ConversionINR0.000.00INR Zero Only1Construction of chamber for 100mm sluices valveitem1101 Nos
10.00M&L for RCC drain pipe NP3, 600mm bore including laying pipes level or to falls in trenches on concrete bed and making all necessary joints, waste and cutting as jointed complete with collars all as specified and directed.47.00RMExcess(+)1Full ConversionINR0.000.00INR Zero Only1Construction of chamber for 100mm sluices valveitem1101 Nos
11.00M&L for 15cm thick PCC 1:3:6, type C-2 (using 40mm graded crushed stone aggregate) as in concrete bed, width of concrete bedding shall extended laterally 15cm beyond either side of the outer dia of pipe laid to falls in trenches in any depth including packing under and haunching against the sides of SGSW/ RCC drain pipes NP3, 600mm bore after the pipes have been laid and tested including necessary form work and supports to concrete and for laying beds to falls complete all as specified and directed. 47.00RMExcess(+)1Full ConversionINR0.000.00INR Zero Only1Construction of chamber for 100mm sluices valveitem1101 Nos
Total in Figures0.00INR Zero Only4Construction of chamber for 100mm sluice platesitem510Nos
Quoted Rate in FiguresSelect0.00000.0000 Zero Only
Quoted Rate in WordsINR Zero Only