Items - REPAIRS AND MAINTENANCE TO B/R WORKS AT MD ACCN AND OTM DGQA GHATKOPAR AND VIKHROLI UNDER GE (NORTH) SANTACRUZ, MUMBAI
| Item Rate BoQ | ||||||||||||||||||||||||||||||||||||||||||||||||||||||
| BoQ_Ver3.1 | Item Rate | Normal | INR Only | INR | ||||||||||||||||||||||||||||||||||||||||||||||||||
| Select, Excess (+), Less (-) | Less (-) | |||||||||||||||||||||||||||||||||||||||||||||||||||||
| Tender Inviting Authority: Garrison Engineer (North) Mumbai | ||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Name of Work: :REPAIRS AND MAINTENANCE TO B/R WORKS AT MD ACCN AND OTM DGQA GHATKOPAR AND VIKHROLI UNDER GE (NORTH) SANTACRUZ, MUMBAI | ||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Contract No: GE(N) M- OF 2025-2026 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Name of the Bidder/ Bidding Firm / Company : | ||||||||||||||||||||||||||||||||||||||||||||||||||||||
| PRICE SCHEDULE ( BOQ DATED : 22 AUG 2025) (This BOQ template must not be modified/replaced by the bidder and the same should be uploaded after filling the relevant columns, else the bidder is liable to be rejected for this tender. Bidders are allowed to enter the Bidder Name and Values only ) | ||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Sl. No. | Item Description | Item Code / Make | Quantity | Units | Estimated Rate in Rs. P | Addition / Deduction | Addition / Deduction Values | Currency Convertion against each Item | Quoted Currency in INR / Other Currency | BASIC RATE In Figures To be entered by the Bidder Rs. P | Excise Duty | VAT | Freight Charges ( Unloading & Stacking) | Any Other Taxes/Duties/Levies | Other Taxes 2 | IIIrd Party i.e DGS&D / RITES etc Inspection Charges @0.34%+Service Tax | Less for Cenvat Credit,if any respect of Supplies Under full Excise Duty Category | TOTAL AMOUNT in Rs. P | TOTAL AMOUNT | TOTAL AMOUNT In Words | ||||||||||||||||||||||||||||||||||
| 1 | 2 | 3 | 3 | 4 | 6 | 7 | 8 | 9 | 10 | 11 | 12 | 5 | 14 | 15 | 16 | 17 | 18 | 19 | 20 | 21 | 22 | 23 | 24 | 25 | 26 | 27 | 28 | 29 | 30 | 31 | 32 | 33 | 34 | 35 | 36 | 37 | 38 | 39 | 40 | 41 | 42 | 43 | 44 | 45 | 46 | 47 | 48 | 49 | 50 | 51 | 52 | 8 | 6 | 7 |
| 1 | Demolition of brick work/stone masonry built in cement mortar or cement lime mortar including all quoins, arches, pillars, PCC coping etc, but excluding ashlar facings, dressed stonework and precast concrete articles and removing of debris outside MD land complete all as specified and as directed by Engineer-in-Charge. | 3.00 | CUBIC METRE | 100.00 | Excess(+) | 1 | Full Conversion | INR | 0.00 | 0.00 | INR Zero Only | 1 | Demolition of brick work/stone masonry built in cement mortar or cement lime mortar including all quoins, arches, pillars, PCC coping etc, but excluding ashlar facings, dressed stonework and precast concrete articles and removing of debris outside MD land complete all as specified and as directed by Engineer-in-Charge. | 3 | CUBIC METRE | |||||||||||||||||||||||||||||||||||||||
| 2 | Material and labour for brick work with sub class 'B' bricks, straight or curved on plan, exceeding 6 m mean radius, built in cement mortar 1:6 complete all as specified and as directed by Engineer-in-Charge. | 3.00 | CUBIC METRE | 100.00 | Excess(+) | 1 | Full Conversion | INR | 0.00 | 0.00 | INR Zero Only | 2 | Material and labour for brick work with sub class 'B' bricks, straight or curved on plan, exceeding 6 m mean radius, built in cement mortar 1:6 complete all as specified and as directed by Engineer-in-Charge. | 3 | CUBIC METRE | |||||||||||||||||||||||||||||||||||||||
| 3 | Taking down cement plaster of any description on brick or stone walls etc including raking out joints, hacking for key, scrubbing down with water etc and removing debris outside MD land complete all as specified and as directed by Engineer-in-Charge | 300.00 | SQUARE METRE | 10.00 | Excess(+) | 1 | Full Conversion | INR | 0.00 | 0.00 | INR Zero Only | 3 | Taking down cement plaster of any description on brick or stone walls etc including raking out joints, hacking for key, scrubbing down with water etc and removing debris outside MD land complete all as specified and as directed by Engineer-in-Charge | 300 | SQUARE METRE | |||||||||||||||||||||||||||||||||||||||
| 4 | Material and labour for 15 mm thick rendering in cement mortar (1:6) on brick/concrete surfaces & finishing the surface even and smooth without using extra cement complete all as specified and as directed by Engineer-in-Charge. | 70.00 | SQUARE METRE | 10.00 | Excess(+) | 1 | Full Conversion | INR | 0.00 | 0.00 | INR Zero Only | 4 | Material and labour for 15 mm thick rendering in cement mortar (1:6) on brick/concrete surfaces & finishing the surface even and smooth without using extra cement complete all as specified and as directed by Engineer-in-Charge. | 70 | SQUARE METRE | |||||||||||||||||||||||||||||||||||||||
| 5 | Material and labour for rendering 5mm thick plaster in cement mortar (1:3) on concrete surfaces of ceiling and finishing the surfaces even and smooth without using extra cement complete all as specified and as directed by Engineer-in-Charge. | 40.00 | SQUARE METRE | 10.00 | Excess(+) | 1 | Full Conversion | INR | 0.00 | 0.00 | INR Zero Only | 5 | Material and labour for rendering 5mm thick plaster in cement mortar (1:3) on concrete surfaces of ceiling and finishing the surfaces even and smooth without using extra cement complete all as specified and as directed by Engineer-in-Charge. | 40 | SQUARE METRE | |||||||||||||||||||||||||||||||||||||||
| 6 | Material and labour for rendering 15mm (10+5) thick plaster in cement mortar (1:4) on external surfaces of the brick, PCC block or concrete surfaces and finishing the surfaces even and smooth without using extra cement , upto the height of bldg roof including necessary formwork/ scaffolding /ladders and safety belt etc complete all as specified and as directed by Engineer-in-Charge.complete all as specified and as directed by Engineer-in-Charge. Note: waterproofing compound shall be measured and paid separately | 210.00 | SQUARE METRE | 10.00 | Excess(+) | 1 | Full Conversion | INR | 0.00 | 0.00 | INR Zero Only | 6 | Material and labour for rendering 15mm (10+5) thick plaster in cement mortar (1:4) on external surfaces of the brick, PCC block or concrete surfaces and finishing the surfaces even and smooth without using extra cement , upto the height of bldg roof including necessary formwork/ scaffolding /ladders and safety belt etc complete all as specified and as directed by Engineer-in-Charge.complete all as specified and as directed by Engineer-in-Charge. Note: waterproofing compound shall be measured and paid separately | 210 | SQUARE METRE | |||||||||||||||||||||||||||||||||||||||
| 7 | Material and labour for preparation of newly plastered surfaces of wall and applying two coats of oil bound distemper with roller over a coat of alkali resistant wall primer complete all as specified and directed by Engineer in Charge. Make: Asian Paints (Tractor) / Nerolac Paints /Jenson & NIcholson / Shalimar Paints | 70.00 | SQUARE METRE | 10.00 | Excess(+) | 1 | Full Conversion | INR | 0.00 | 0.00 | INR Zero Only | 7 | Material and labour for preparation of newly plastered surfaces of wall and applying two coats of oil bound distemper with roller over a coat of alkali resistant wall primer complete all as specified and directed by Engineer in Charge. Make: Asian Paints (Tractor) / Nerolac Paints /Jenson & NIcholson / Shalimar Paints | 70 | SQUARE METRE | |||||||||||||||||||||||||||||||||||||||
| 8 | Material and labour for preparation of new plastered surfaces of ceiling and applying two coats of white wash complete all as specified and directed by Engineer in Charge. | 40.00 | SQUARE METRE | 10.00 | Excess(+) | 1 | Full Conversion | INR | 0.00 | 0.00 | INR Zero Only | 8 | Material and labour for preparation of new plastered surfaces of ceiling and applying two coats of white wash complete all as specified and directed by Engineer in Charge. | 40 | SQUARE METRE | |||||||||||||||||||||||||||||||||||||||
| 9 | Material and labour for new plastered wall surface and applying two coats of Acrylic weather proof coat 100% exterior grade paint over one coat of acrylic primer upto a height of bldg roof including formwork/scaffolding/ladders and safety belts with precautions etc complete all as specified and as directed by Engineer-in-Charge. Make : APEX ULTIMA” of Asian Paints/ “WEATHER COAT ALL GUARD” of Berger Paints/"EXCEL TOP GUARD” of Nerolac/ “DULUX WEATHERSHIELD MAX” of ICI India | 210.00 | SQUARE METRE | 10.00 | Excess(+) | 1 | Full Conversion | INR | 0.00 | 0.00 | INR Zero Only | 9 | Material and labour for new plastered wall surface and applying two coats of Acrylic weather proof coat 100% exterior grade paint over one coat of acrylic primer upto a height of bldg roof including formwork/scaffolding/ladders and safety belts with precautions etc complete all as specified and as directed by Engineer-in-Charge. Make : APEX ULTIMA” of Asian Paints/ “WEATHER COAT ALL GUARD” of Berger Paints/"EXCEL TOP GUARD” of Nerolac/ “DULUX WEATHERSHIELD MAX” of ICI India | 210 | SQUARE METRE | |||||||||||||||||||||||||||||||||||||||
| 10 | Supply only integral water proofing compound ISI marked complete all as specified and as directed by Engineer-in-Charge. Make : Pidilite Industries Ltd, Taloja /Super Aquacem (India) Ltd /FOSROC/Siko/Dr Fixit | 60.00 | KILOGRAM | 10.00 | Excess(+) | 1 | Full Conversion | INR | 0.00 | 0.00 | INR Zero Only | 10 | Supply only integral water proofing compound ISI marked complete all as specified and as directed by Engineer-in-Charge. Make : Pidilite Industries Ltd, Taloja /Super Aquacem (India) Ltd /FOSROC/Siko/Dr Fixit | 60 | KILOGRAM | |||||||||||||||||||||||||||||||||||||||
| 11 | Demolition of cement concrete(unreinforced) in ground floors and pavings not exceeding 15 cm thickness (below or above ground level) and removal of rubbish to outside MD land etc complete all as specified and as per directed all as specified and as per directed | 60.00 | CUBIC METRE | 10.00 | Excess(+) | 1 | Full Conversion | INR | 0.00 | 0.00 | INR Zero Only | 11 | Demolition of cement concrete(unreinforced) in ground floors and pavings not exceeding 15 cm thickness (below or above ground level) and removal of rubbish to outside MD land etc complete all as specified and as per directed all as specified and as per directed | 60 | CUBIC METRE | |||||||||||||||||||||||||||||||||||||||
| 12 | Material and labour for 75 mm thick cement concrete (1:4:8) type D-2 using 40 mm graded stone aggregate as in sub base of flooring/ hard standing, path and finishing the surface even and fair without using extra cement complete all as specified and as directed by Engineer-in-Charge. | 50.00 | SQUARE METRE | 10.00 | Excess(+) | 1 | Full Conversion | INR | 0.00 | 0.00 | INR Zero Only | 12 | Material and labour for 75 mm thick cement concrete (1:4:8) type D-2 using 40 mm graded stone aggregate as in sub base of flooring/ hard standing, path and finishing the surface even and fair without using extra cement complete all as specified and as directed by Engineer-in-Charge. | 50 | SQUARE METRE | |||||||||||||||||||||||||||||||||||||||
| 13 | Material and labour for 75mm thick plain cement concrete 1:2:4 type B-1 using 20 mm graded stone aggregate in ground floors and finishing the surfaces even and smooth without using extra cement complete all as specified and directed. | 50.00 | SQUARE METRE | 10.00 | Excess(+) | 1 | Full Conversion | INR | 0.00 | 0.00 | INR Zero Only | 13 | Material and labour for 75mm thick plain cement concrete 1:2:4 type B-1 using 20 mm graded stone aggregate in ground floors and finishing the surfaces even and smooth without using extra cement complete all as specified and directed. | 50 | SQUARE METRE | |||||||||||||||||||||||||||||||||||||||
| 14 | Material and labour for 75mm thick cement concrete (1:3:6) type C2, using 40mm graded stone aggregate as in plinth protection and finishing the surfaces even and smooth without using extra cement, including joints of plinth protection filled with bitumen mastic (1:3) complete all as specified and as directed by Engineer-in-Charge. | 40.00 | SQUARE METRE | 10.00 | Excess(+) | 1 | Full Conversion | INR | 0.00 | 0.00 | INR Zero Only | 14 | Material and labour for 75mm thick cement concrete (1:3:6) type C2, using 40mm graded stone aggregate as in plinth protection and finishing the surfaces even and smooth without using extra cement, including joints of plinth protection filled with bitumen mastic (1:3) complete all as specified and as directed by Engineer-in-Charge. | 40 | SQUARE METRE | |||||||||||||||||||||||||||||||||||||||
| 15 | Material and labour for sand cushioning under floors or in foundation , 25mm thick including watering and consolidation complete all as specified and as directed by Engineer-in-Charge. | 5.00 | CUBIC METRE | 10.00 | Excess(+) | 1 | Full Conversion | INR | 0.00 | 0.00 | INR Zero Only | 15 | Material and labour for sand cushioning under floors or in foundation , 25mm thick including watering and consolidation complete all as specified and as directed by Engineer-in-Charge. | 5 | CUBIC METRE | |||||||||||||||||||||||||||||||||||||||
| 16 | Material and labour for machine pressed precast concrete interlocking paver block, of any shape and size conforming to IS 15658-2006 of 60mm thickness, M-35 grade with grey cement and pigment including 25mm thick crushed stone sand cushioning including watering and consolidation below paver block complete all as specified and as directed by Engineer-in-Charge. Make: Mehtab Tiles/Indore/M/S Ultra Tiles/NITCO/Topaz Tiles/Navya Tiles Jodhpur | 200.00 | SQUARE METRE | 100.00 | Excess(+) | 1 | Full Conversion | INR | 0.00 | 0.00 | INR Zero Only | 16 | Material and labour for machine pressed precast concrete interlocking paver block, of any shape and size conforming to IS 15658-2006 of 60mm thickness, M-35 grade with grey cement and pigment including 25mm thick crushed stone sand cushioning including watering and consolidation below paver block complete all as specified and as directed by Engineer-in-Charge. Make: Mehtab Tiles/Indore/M/S Ultra Tiles/NITCO/Topaz Tiles/Navya Tiles Jodhpur | 200 | SQUARE METRE | |||||||||||||||||||||||||||||||||||||||
| 17 | Material and labour for heavy duty coloured chequered tiles of size 300x300x25mm thick (+/-) in approved design, colour manufactured by rubber mould techhnology, conforming to IS 13801 for wear/abrasion, resitance, water absorption, wet tranverse strenght, fitness, perpendicularity and straigtness and ASTM:303, tiles shall be manufactured in two layers, top layer (minimum 6mm thick), should be silica sand, graded marbel stone aggregate with white cement "Bayer" pigments conforming to relevent IS code and bottom layer could be in grey cement, laid over and including cement including cement screed bed 20 mm thick in CM 1:6, jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of the complete all as specified and as directed by Engineer-in-Charge. Make- Ultra tiles Pvt Ltd, Duracrete Tiles or Eurocon Tiles | 300.00 | SQUARE METRE | 100.00 | Excess(+) | 1 | Full Conversion | INR | 0.00 | 0.00 | INR Zero Only | 17 | Material and labour for heavy duty coloured chequered tiles of size 300x300x25mm thick (+/-) in approved design, colour manufactured by rubber mould techhnology, conforming to IS 13801 for wear/abrasion, resitance, water absorption, wet tranverse strenght, fitness, perpendicularity and straigtness and ASTM:303, tiles shall be manufactured in two layers, top layer (minimum 6mm thick), should be silica sand, graded marbel stone aggregate with white cement "Bayer" pigments conforming to relevent IS code and bottom layer could be in grey cement, laid over and including cement including cement screed bed 20 mm thick in CM 1:6, jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of the complete all as specified and as directed by Engineer-in-Charge. Make- Ultra tiles Pvt Ltd, Duracrete Tiles or Eurocon Tiles | 300 | SQUARE METRE | |||||||||||||||||||||||||||||||||||||||
| 18 | Demolition of stone slab and tiles of any description or thickness in floor, apron and vertical surfaces, laid bedded and pointed in any mortar and removing debris outside MD land complete all as specified and as directed by Engineer-in-Charge. | 5.00 | 10 SQUARE METRE | 10.00 | Excess(+) | 1 | Full Conversion | INR | 0.00 | 0.00 | INR Zero Only | 18 | Demolition of stone slab and tiles of any description or thickness in floor, apron and vertical surfaces, laid bedded and pointed in any mortar and removing debris outside MD land complete all as specified and as directed by Engineer-in-Charge. | 5 | 10 SQUARE METRE | |||||||||||||||||||||||||||||||||||||||
| 19 | Material and labour for marble work 18 to 20 mm thick machine cut, makrana colour/white, table rubbed and polished, bedded and jointed as in steps, jambs, pillar, window cills, cooking platform and like bedded and jointed with grey cement slurry and pointing in white cement 1:2 using marble dust with admixture of pigment to match complete all as specified and as directed by Engineer-in-Charge. | 50.00 | SQUARE METRE | 10.00 | Excess(+) | 1 | Full Conversion | INR | 0.00 | 0.00 | INR Zero Only | 19 | Material and labour for marble work 18 to 20 mm thick machine cut, makrana colour/white, table rubbed and polished, bedded and jointed as in steps, jambs, pillar, window cills, cooking platform and like bedded and jointed with grey cement slurry and pointing in white cement 1:2 using marble dust with admixture of pigment to match complete all as specified and as directed by Engineer-in-Charge. | 50 | SQUARE METRE | |||||||||||||||||||||||||||||||||||||||
| 20 | M& L for edge moulding to 18 to 20mm thick granite stone of counters vanities etc. including machine polishing to edge to give high gloss finish etc complete all as specified and directed by Engr-in-Charge.. | 20.00 | RUNNING METRE | 10.00 | Excess(+) | 1 | Full Conversion | INR | 0.00 | 0.00 | INR Zero Only | 20 | M& L for edge moulding to 18 to 20mm thick granite stone of counters vanities etc. including machine polishing to edge to give high gloss finish etc complete all as specified and directed by Engr-in-Charge.. | 20 | RUNNING METRE | |||||||||||||||||||||||||||||||||||||||
| 21 | Taking down of chowkats or frames not exceeding 1.5sqm each with shutters (without taking off shutters from the frames) & removing clear off site after credit is recovered by Dept complete all as specified and as directed by Engineer-in-Charge | 24.00 | EACH | 10.00 | Excess(+) | 1 | Full Conversion | INR | 0.00 | 0.00 | INR Zero Only | 21 | Taking down of chowkats or frames not exceeding 1.5sqm each with shutters (without taking off shutters from the frames) & removing clear off site after credit is recovered by Dept complete all as specified and as directed by Engineer-in-Charge | 24 | EACH | |||||||||||||||||||||||||||||||||||||||
| 22 | Taking down of chowkats or frames exceeding 1.5sqm but not exceeding 4.0sqm each with shutters (with out taking off shutters from the frames) & removing clear off site after credit is recovered by Dept complete all as specified and as directed by Engineer-in-Charge | 40.00 | EACH | 10.00 | Excess(+) | 1 | Full Conversion | INR | 0.00 | 0.00 | INR Zero Only | 22 | Taking down of chowkats or frames exceeding 1.5sqm but not exceeding 4.0sqm each with shutters (with out taking off shutters from the frames) & removing clear off site after credit is recovered by Dept complete all as specified and as directed by Engineer-in-Charge | 40 | EACH | |||||||||||||||||||||||||||||||||||||||
| 23 | Supply and fix 15 micron coloured aluminium powder coated sections for sliding (3 Track) or openable windows, ventilators, doors, partitions etc including fabrication of frame & shutters and fixing with necessary lugs, cleats, rollers, handles, locking arrangement etc including all accessories such as glazing clips and rubber beadings for fixing glass panes / wire mesh in frame complete all as specified and as directed by Engineer-in-Charge. Make : Hindalco/Indal (Indian Al Coy)/Jindal/Associated Profile & Aluminium Ltd/Ajit India Note: (i) Glass panes /wire mesh will be measured & paid separately. (ii) Rubber beading will not be weighed. | 400.00 | KILOGRAM | 10.00 | Excess(+) | 1 | Full Conversion | INR | 0.00 | 0.00 | INR Zero Only | 23 | Supply and fix 15 micron coloured aluminium powder coated sections for sliding (3 Track) or openable windows, ventilators, doors, partitions etc including fabrication of frame & shutters and fixing with necessary lugs, cleats, rollers, handles, locking arrangement etc including all accessories such as glazing clips and rubber beadings for fixing glass panes / wire mesh in frame complete all as specified and as directed by Engineer-in-Charge. Make : Hindalco/Indal (Indian Al Coy)/Jindal/Associated Profile & Aluminium Ltd/Ajit India Note: (i) Glass panes /wire mesh will be measured & paid separately. (ii) Rubber beading will not be weighed. | 400 | KILOGRAM | |||||||||||||||||||||||||||||||||||||||
| 24 | Supply and fix anodised aluminium grill (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design/ pattern, with channel of size 38mm x 12mm x1.3mm and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, all complete as per requirement and direction of Engineer-in- charge. Make: DECOGRILLE of Associated group / Royal Alum grill Pvt Ltd or equivalent make as approved by GE | 50.00 | SQUARE METRE | 10.00 | Excess(+) | 1 | Full Conversion | INR | 0.00 | 0.00 | INR Zero Only | 24 | Supply and fix anodised aluminium grill (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design/ pattern, with channel of size 38mm x 12mm x1.3mm and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, all complete as per requirement and direction of Engineer-in- charge. Make: DECOGRILLE of Associated group / Royal Alum grill Pvt Ltd or equivalent make as approved by GE | 50 | SQUARE METRE | |||||||||||||||||||||||||||||||||||||||
| 25 | Supply and fix in repairs 4.0mm thick black glass, ordinary quality, in square exceeding 0.5 Sqm in each pane, fixed in aluminium windows complete all as specified and as directed by Engineer-in-Charge. Make : Modiguard/Atul/Kohinoor/Swastik/Saint Gobain | 40.00 | SQUARE METRE | 10.00 | Excess(+) | 1 | Full Conversion | INR | 0.00 | 0.00 | INR Zero Only | 25 | Supply and fix in repairs 4.0mm thick black glass, ordinary quality, in square exceeding 0.5 Sqm in each pane, fixed in aluminium windows complete all as specified and as directed by Engineer-in-Charge. Make : Modiguard/Atul/Kohinoor/Swastik/Saint Gobain | 40 | SQUARE METRE | |||||||||||||||||||||||||||||||||||||||
| 26 | Supply and fix 4.0mm thick figured glass, pin headed type, ordinary quality, fixing with oil putty and glazing clip, in squares not exceeding 0.5 Sqm in each pane complete all as specified and as directed by Engineer-in-Charge. Make : Modiguard/Atul/Kohinoor/Swastik/Saint Gobain | 6.00 | SQUARE METRE | 10.00 | Excess(+) | 1 | Full Conversion | INR | 0.00 | 0.00 | INR Zero Only | 26 | Supply and fix 4.0mm thick figured glass, pin headed type, ordinary quality, fixing with oil putty and glazing clip, in squares not exceeding 0.5 Sqm in each pane complete all as specified and as directed by Engineer-in-Charge. Make : Modiguard/Atul/Kohinoor/Swastik/Saint Gobain | 6 | SQUARE METRE | |||||||||||||||||||||||||||||||||||||||
| 27 | Supply and fix aluminium anodised wire cloth, 0.45mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and as directed by Engineer-in-Charge | 40.00 | SQUARE METRE | 10.00 | Excess(+) | 1 | Full Conversion | INR | 0.00 | 0.00 | INR Zero Only | 27 | Supply and fix aluminium anodised wire cloth, 0.45mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and as directed by Engineer-in-Charge | 40 | SQUARE METRE | |||||||||||||||||||||||||||||||||||||||
| 28 | M& L for 12mm thick toughned glass with edge moulding as in hinged doors, similar work and cutting to shape, drilling holes required including 2 nos handles and floor spring and all fitting required of glass door complete all as specified and directed by Engr-in-Charge.. | 12.00 | SQUARE METRE | 10.00 | Excess(+) | 1 | Full Conversion | INR | 0.00 | 0.00 | INR Zero Only | 28 | M& L for 12mm thick toughned glass with edge moulding as in hinged doors, similar work and cutting to shape, drilling holes required including 2 nos handles and floor spring and all fitting required of glass door complete all as specified and directed by Engr-in-Charge.. | 12 | SQUARE METRE | |||||||||||||||||||||||||||||||||||||||
| 29 | Supply and fix in repair aluminium (extruded section) body Door closer, hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000mm in width and of weight between 61 to 80 kg and fixed complete all as specified and as directed by Engineer-in-Charge. Make- Everlite/ Universal/ Hardwin/ Dyana | 6.00 | EACH | 10.00 | Excess(+) | 1 | Full Conversion | INR | 0.00 | 0.00 | INR Zero Only | 29 | Supply and fix in repair aluminium (extruded section) body Door closer, hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000mm in width and of weight between 61 to 80 kg and fixed complete all as specified and as directed by Engineer-in-Charge. Make- Everlite/ Universal/ Hardwin/ Dyana | 6 | EACH | |||||||||||||||||||||||||||||||||||||||
| 30 | Material and labour for venetian blinds, horizontal type 100mm slot consisting of coated aluminium tube of 38mm diameter with provision of fabric clamping, the fabric is rolled up and down through a chain drive system with built in drive gear and an over run brake system, the side brackets are universal type suitable both for wall and ceiling mounting, the bottom end of the fabric is rolled over an oval shape aluminium tube with provision to lock the fabric etc including dismantling of old damaged one complete all as specified and as directed by Engr-in-charge . Note:- The colour ,design and shade shall be as approved by GE . Make : Vista/Amar | 20.00 | SQUARE METRE | 10.00 | Excess(+) | 1 | Full Conversion | INR | 0.00 | 0.00 | INR Zero Only | 30 | Material and labour for venetian blinds, horizontal type 100mm slot consisting of coated aluminium tube of 38mm diameter with provision of fabric clamping, the fabric is rolled up and down through a chain drive system with built in drive gear and an over run brake system, the side brackets are universal type suitable both for wall and ceiling mounting, the bottom end of the fabric is rolled over an oval shape aluminium tube with provision to lock the fabric etc including dismantling of old damaged one complete all as specified and as directed by Engr-in-charge . Note:- The colour ,design and shade shall be as approved by GE . Make : Vista/Amar | 20 | SQUARE METRE | |||||||||||||||||||||||||||||||||||||||
| 31 | Dismantling floor hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish out side MD land complete all as specified and as directed by Engineer-in-Charge. | 250.00 | SQUARE METRE | 100.00 | Excess(+) | 1 | Full Conversion | INR | 0.00 | 0.00 | INR Zero Only | 31 | Dismantling floor hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish out side MD land complete all as specified and as directed by Engineer-in-Charge. | 250 | SQUARE METRE | |||||||||||||||||||||||||||||||||||||||
| 32 | Material and labour for non skid coloured ceramic tiles (Joint free), 7 to 8mm thick (square/rectangular), area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc., set and jointed in neat cement slurry and pointed in white or colour cement to match over and including screed bed of 20mm thick in Cement mortar 1:4 etc complete all as specified and as directed by Engineer-in-Charge. Make: M/s H R Johnson / M/s Kajaria / M/s Somany Tiles Ltd / RAK tiles/ Orient bell/Orient bell | 30.00 | SQUARE METRE | 100.00 | Excess(+) | 1 | Full Conversion | INR | 0.00 | 0.00 | INR Zero Only | 32 | Material and labour for non skid coloured ceramic tiles (Joint free), 7 to 8mm thick (square/rectangular), area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc., set and jointed in neat cement slurry and pointed in white or colour cement to match over and including screed bed of 20mm thick in Cement mortar 1:4 etc complete all as specified and as directed by Engineer-in-Charge. Make: M/s H R Johnson / M/s Kajaria / M/s Somany Tiles Ltd / RAK tiles/ Orient bell/Orient bell | 30 | SQUARE METRE | |||||||||||||||||||||||||||||||||||||||
| 33 | Material and labour for glazed coloured ceramic tiles, 1st quality of size 350 x 250 x 7 mm thick or 450 x 350 x 7mm thick (or nearest size) on vertical surface such as skirting, dado, riser/steps etc, set and jointed in neat cement slurry and pointed in colour cement to match including 10mm thick backing coat in Cement Mortar (1:4) etc complete all as specified and as directed by Engineer-in-Charge Make:M/s H R Johnson/M/s Orient Bell Tiles/M/s Kajaria/M/s Somany Tiles Ltd/M/s Nitco tiles/M/s Swastik Tiles / RAK tiles/ Orient bell | 100.00 | SQUARE METRE | 10.00 | Excess(+) | 1 | Full Conversion | INR | 0.00 | 0.00 | INR Zero Only | 33 | Material and labour for glazed coloured ceramic tiles, 1st quality of size 350 x 250 x 7 mm thick or 450 x 350 x 7mm thick (or nearest size) on vertical surface such as skirting, dado, riser/steps etc, set and jointed in neat cement slurry and pointed in colour cement to match including 10mm thick backing coat in Cement Mortar (1:4) etc complete all as specified and as directed by Engineer-in-Charge Make:M/s H R Johnson/M/s Orient Bell Tiles/M/s Kajaria/M/s Somany Tiles Ltd/M/s Nitco tiles/M/s Swastik Tiles / RAK tiles/ Orient bell | 100 | SQUARE METRE | |||||||||||||||||||||||||||||||||||||||
| 34 | Material and labour for non skid coloured ceramic tiles (Joint free), 7 to 8mm thick, 600 x 600mm, in floors etc., set and jointed in neat cement slurry and pointed in white or colour cement to match over and including screed bed of 20mm thick in Cement mortar 1:4 etc complete all as specified and as directed by Engineer-in-Charge. Make: M/s H R Johnson / M/s Kajaria / M/s Somany Tiles Ltd / RAK tiles/ Orient bell/Orient bell | 100.00 | SQUARE METRE | 10.00 | Excess(+) | 1 | Full Conversion | INR | 0.00 | 0.00 | INR Zero Only | 34 | Material and labour for non skid coloured ceramic tiles (Joint free), 7 to 8mm thick, 600 x 600mm, in floors etc., set and jointed in neat cement slurry and pointed in white or colour cement to match over and including screed bed of 20mm thick in Cement mortar 1:4 etc complete all as specified and as directed by Engineer-in-Charge. Make: M/s H R Johnson / M/s Kajaria / M/s Somany Tiles Ltd / RAK tiles/ Orient bell/Orient bell | 100 | SQUARE METRE | |||||||||||||||||||||||||||||||||||||||
| 35 | Material and labour for coloured ceramic tiles on vertical surface in skirting/dado including 10mm thick Cement Mortar 1:3 backing coat etc complete all as specified and as directed by Engineer-in-Charge. | 20.00 | SQUARE METRE | 10.00 | Excess(+) | 1 | Full Conversion | INR | 0.00 | 0.00 | INR Zero Only | 35 | Material and labour for coloured ceramic tiles on vertical surface in skirting/dado including 10mm thick Cement Mortar 1:3 backing coat etc complete all as specified and as directed by Engineer-in-Charge. | 20 | SQUARE METRE | |||||||||||||||||||||||||||||||||||||||
| 36 | Demolition of reinforced cement concrete of any description (beam, chajja, fins, RCC water tank, roof slab etc) & in any position including necessary scaffolding arrangement (reinforcement cut as required to facilitate demolition) and removing concrete debris and depositing outside MD land all as specified and as directed by Engineer-in-Charge. | 16.00 | CUBIC METRE | 10.00 | Excess(+) | 1 | Full Conversion | INR | 0.00 | 0.00 | INR Zero Only | 36 | Demolition of reinforced cement concrete of any description (beam, chajja, fins, RCC water tank, roof slab etc) & in any position including necessary scaffolding arrangement (reinforcement cut as required to facilitate demolition) and removing concrete debris and depositing outside MD land all as specified and as directed by Engineer-in-Charge. | 16 | CUBIC METRE | |||||||||||||||||||||||||||||||||||||||
| 37 | Supply and fix TMT bars, 10mm dia and over cut to length bent to shape required including cranking, bending spirally for hooping for columns hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and directed by Engineer-in-Charge. Note: Cutting of rusted reinforcement & welding shall be inclusive in this item of work | 800.00 | KILOGRAM | 10.00 | Excess(+) | 1 | Full Conversion | INR | 0.00 | 0.00 | INR Zero Only | 37 | Supply and fix TMT bars, 10mm dia and over cut to length bent to shape required including cranking, bending spirally for hooping for columns hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and directed by Engineer-in-Charge. Note: Cutting of rusted reinforcement & welding shall be inclusive in this item of work | 800 | KILOGRAM | |||||||||||||||||||||||||||||||||||||||
| 38 | Supply and fix TMT bars, 8 to 10mm dia in stirrups, spacers and binder, cut to length bent to shape required including cranking, bending spirally for hooping for columns hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and directed by Engineer-in-Charge. Note: Cutting of rusted reinforcement & welding shall be inclusive in this item of work | 400.00 | KILOGRAM | 10.00 | Excess(+) | 1 | Full Conversion | INR | 0.00 | 0.00 | INR Zero Only | 38 | Supply and fix TMT bars, 8 to 10mm dia in stirrups, spacers and binder, cut to length bent to shape required including cranking, bending spirally for hooping for columns hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and directed by Engineer-in-Charge. Note: Cutting of rusted reinforcement & welding shall be inclusive in this item of work | 400 | KILOGRAM | |||||||||||||||||||||||||||||||||||||||
| 39 | Material & labour for repairing of damaged concrete portion by using superfluid dual shrinkage compensated structural grade M-40 micro concrete of at all levels with all leads and lift as directed including mixing, laying, levelling, finishing and curing complete all as specified and directed by Engineer-in-Charge. Make: Fosroc / SIKA / BASF / Krishna Conchem or equivalent approved . | 6.00 | CUBIC METRE | 10.00 | Excess(+) | 1 | Full Conversion | INR | 0.00 | 0.00 | INR Zero Only | 39 | Material & labour for repairing of damaged concrete portion by using superfluid dual shrinkage compensated structural grade M-40 micro concrete of at all levels with all leads and lift as directed including mixing, laying, levelling, finishing and curing complete all as specified and directed by Engineer-in-Charge. Make: Fosroc / SIKA / BASF / Krishna Conchem or equivalent approved . | 6 | CUBIC METRE | |||||||||||||||||||||||||||||||||||||||
| 40 | Supply & fix MS/TS dowel pins/staple/shear pins including drilling holes in concrete and providing labour but excludeing the materials for grouting the pins etc complete all as specified and as directed by Engineer-in-Charge. | 160.00 | EACH | 10.00 | Excess(+) | 1 | Full Conversion | INR | 0.00 | 0.00 | INR Zero Only | 40 | Supply & fix MS/TS dowel pins/staple/shear pins including drilling holes in concrete and providing labour but excludeing the materials for grouting the pins etc complete all as specified and as directed by Engineer-in-Charge. | 160 | EACH | |||||||||||||||||||||||||||||||||||||||
| 41 | Material and labour for providing and applying rust cleaner of approved make over prepared reinforcement, including removing concrete all around reinforcement including from behind the reinforcing bars by manual methods such as hammering the rebar, using wire brushes, chiseling, etc. and applying rust removing solution of approved make with cotton waste swab to reinforcements etc complete as directed by Engineer-In-Charge. Make- Dr FIXIT/ FOSROC/ Krishna Conchem/BASF/Sika | 160.00 | SQUARE METRE | 10.00 | Excess(+) | 1 | Full Conversion | INR | 0.00 | 0.00 | INR Zero Only | 41 | Material and labour for providing and applying rust cleaner of approved make over prepared reinforcement, including removing concrete all around reinforcement including from behind the reinforcing bars by manual methods such as hammering the rebar, using wire brushes, chiseling, etc. and applying rust removing solution of approved make with cotton waste swab to reinforcements etc complete as directed by Engineer-In-Charge. Make- Dr FIXIT/ FOSROC/ Krishna Conchem/BASF/Sika | 160 | SQUARE METRE | |||||||||||||||||||||||||||||||||||||||
| 42 | Material and labour for providing and applying two coats of anticorrosive epoxy phenolic rebar protective system IPNet RB of Krishna Conchem or equivalent of approved make and quality comprises of resin and hardener mixed as per manufacturer's instructions with minimum 9-10 hours between the coats, sprinkling dry sand when 2nd coat is tacky so as to provide rough finish and ensuring air curing of minimum 10 hours after the top coat before any subsequent treatment etc. including scaffolding etc complete all as specified and as directed by Engineer-in-Charge. Make- Dr FIXIT/ FOSROC/ Krishna Conchem/BASF/Sika as approved by GE Note: (a) New Reinforcement shall be measured and paid separately under respective item. (b) Cost of welding deemed to be inclusive in this item of work. | 160.00 | SQUARE METRE | 10.00 | Excess(+) | 1 | Full Conversion | INR | 0.00 | 0.00 | INR Zero Only | 42 | Material and labour for providing and applying two coats of anticorrosive epoxy phenolic rebar protective system IPNet RB of Krishna Conchem or equivalent of approved make and quality comprises of resin and hardener mixed as per manufacturer's instructions with minimum 9-10 hours between the coats, sprinkling dry sand when 2nd coat is tacky so as to provide rough finish and ensuring air curing of minimum 10 hours after the top coat before any subsequent treatment etc. including scaffolding etc complete all as specified and as directed by Engineer-in-Charge. Make- Dr FIXIT/ FOSROC/ Krishna Conchem/BASF/Sika as approved by GE Note: (a) New Reinforcement shall be measured and paid separately under respective item. (b) Cost of welding deemed to be inclusive in this item of work. | 160 | SQUARE METRE | |||||||||||||||||||||||||||||||||||||||
| 43 | Material and labour for providing and applying a priming cum bonding coat of two component Epoxide Resin conforming to ASTM-C-882-91 of approved make and quality to clean and sound concrete area by brush or any other established method by mixing base and curing agent 2:1 proportion by weight for joining old and new concrete as per technical specifications of manufacturer complete all as specified and as directed by Engineer-in-Charge. Make- Dr FIXIT/ FOSROC/ Krishna Conchem/BASF/Sika as approved by GE Note-Work shall be carried out as per the manufacturers specifications & certificate on this account shall be taken from consultant and as approved by Engineer-in-charge | 160.00 | SQUARE METRE | 10.00 | Excess(+) | 1 | Full Conversion | INR | 0.00 | 0.00 | INR Zero Only | 43 | Material and labour for providing and applying a priming cum bonding coat of two component Epoxide Resin conforming to ASTM-C-882-91 of approved make and quality to clean and sound concrete area by brush or any other established method by mixing base and curing agent 2:1 proportion by weight for joining old and new concrete as per technical specifications of manufacturer complete all as specified and as directed by Engineer-in-Charge. Make- Dr FIXIT/ FOSROC/ Krishna Conchem/BASF/Sika as approved by GE Note-Work shall be carried out as per the manufacturers specifications & certificate on this account shall be taken from consultant and as approved by Engineer-in-charge | 160 | SQUARE METRE | |||||||||||||||||||||||||||||||||||||||
| 44 | Material and labour for formwork using steel shutters or 12mm marine ply to have the smooth finish to pour the micro concrete/ concrete including de-shuttering etc complete all as specified and as directed by Engineer-in-Charge. | 130.00 | SQUARE METRE | 10.00 | Excess(+) | 1 | Full Conversion | INR | 0.00 | 0.00 | INR Zero Only | 44 | Material and labour for formwork using steel shutters or 12mm marine ply to have the smooth finish to pour the micro concrete/ concrete including de-shuttering etc complete all as specified and as directed by Engineer-in-Charge. | 130 | SQUARE METRE | |||||||||||||||||||||||||||||||||||||||
| 45 | Material and labour for surface preparation of structural part by gentle chipping by manually to make the surface rough and thoroughly cleaned with air as per standard practice and directions of Engineer-in-charge (including removal of external plaster, wherever exists) including transportation, labour, conveying debris away from the site (50 m max.), tools and tackles, lead and lift etc.complete all as specified and as directed by Engineer-in-Charge. | 100.00 | SQUARE METRE | 10.00 | Excess(+) | 1 | Full Conversion | INR | 0.00 | 0.00 | INR Zero Only | 45 | Material and labour for surface preparation of structural part by gentle chipping by manually to make the surface rough and thoroughly cleaned with air as per standard practice and directions of Engineer-in-charge (including removal of external plaster, wherever exists) including transportation, labour, conveying debris away from the site (50 m max.), tools and tackles, lead and lift etc.complete all as specified and as directed by Engineer-in-Charge. | 100 | SQUARE METRE | |||||||||||||||||||||||||||||||||||||||
| 46 | Repairing the damaged concrete portion by average 20 mm thick polymer plaster @ a dose of 5% in ratio 1:3 (C:M) over the exposed non structural member surface including making the surface evenly smooth etc as per manufacturer's instruction. (Measurement on the basis of finished area). Note for Item No.39 to 46:- (i) The work under Item No. 87 to 93 shall be carried out by authorised applicator only. (ii) Defect liability for these items shall be 5 years from certified date of completion. (iii) Amount of 5% of these items shall be retained during RAR and FB. This amount shall be released after successful completion of Defects liability period as mentioned above. (iv) Non destructive testing shall be got carried out through IIT / NIT / College of Engineering Pune to decide fulfillment of fitness criteria of structure. (v) The test shall be carried out at each discrete location or locations decided by GE or testing authority. (vi)The cost of testing shall be deemed to be included in the rate quoted by the contractor. Completion shall be issued by GE after only getting structural stability certificate of each respective building from testing authority. | 100.00 | SQUARE METRE | 100.00 | Excess(+) | 1 | Full Conversion | INR | 0.00 | 0.00 | INR Zero Only | 46 | Repairing the damaged concrete portion by average 20 mm thick polymer plaster @ a dose of 5% in ratio 1:3 (C:M) over the exposed non structural member surface including making the surface evenly smooth etc as per manufacturer's instruction. (Measurement on the basis of finished area). Note for Item No.39 to 46:- (i) The work under Item No. 87 to 93 shall be carried out by authorised applicator only. (ii) Defect liability for these items shall be 5 years from certified date of completion. (iii) Amount of 5% of these items shall be retained during RAR and FB. This amount shall be released after successful completion of Defects liability period as mentioned above. (iv) Non destructive testing shall be got carried out through IIT / NIT / College of Engineering Pune to decide fulfillment of fitness criteria of structure. (v) The test shall be carried out at each discrete location or locations decided by GE or testing authority. (vi)The cost of testing shall be deemed to be included in the rate quoted by the contractor. Completion shall be issued by GE after only getting structural stability certificate of each respective building from testing authority. | 100 | SQUARE METRE | |||||||||||||||||||||||||||||||||||||||
| 47 | Material and labour for plain cement concrete 1:2:4 type B-1 (using 20mm graded stone aggregate) as in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, holstring courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, kerbs, water troughs, bed plates, concrete block for hold fast etc and the like including necessary form work for fair finished surfaces including weathering, slightly rounded or chamfered angles and throating, as directed etc complete all as specified and as directed by Engineer-in-Charge. | 2.00 | CUBIC METRE | 100.00 | Excess(+) | 1 | Full Conversion | INR | 0.00 | 0.00 | INR Zero Only | 47 | Material and labour for plain cement concrete 1:2:4 type B-1 (using 20mm graded stone aggregate) as in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, holstring courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, kerbs, water troughs, bed plates, concrete block for hold fast etc and the like including necessary form work for fair finished surfaces including weathering, slightly rounded or chamfered angles and throating, as directed etc complete all as specified and as directed by Engineer-in-Charge. | 2 | CUBIC METRE | |||||||||||||||||||||||||||||||||||||||
| 48 | Taking down wall panelling and similar work complete all as specified and directed by Engineer-in-Charge. | 200.00 | Square Metre | 10.00 | Excess(+) | 1 | Full Conversion | INR | 0.00 | 0.00 | INR Zero Only | 48 | Taking down wall panelling and similar work complete all as specified and directed by Engineer-in-Charge. | 200 | Square Metre | |||||||||||||||||||||||||||||||||||||||
| 49 | Supply and fix solid PVC wall lining consisting of 5mm thick wood grain printed PVC sheet inclusive of solvent cement and fixing at site on PVC frame etc complete all as specified and directed by Engineer-in-Charge. Make- Rajshri/ GIZA/ Echon/ Accucel | 200.00 | Square Metre | 10.00 | Excess(+) | 1 | Full Conversion | INR | 0.00 | 0.00 | INR Zero Only | 49 | Supply and fix solid PVC wall lining consisting of 5mm thick wood grain printed PVC sheet inclusive of solvent cement and fixing at site on PVC frame etc complete all as specified and directed by Engineer-in-Charge. Make- Rajshri/ GIZA/ Echon/ Accucel | 200 | Square Metre | |||||||||||||||||||||||||||||||||||||||
| 50 | Supply & Fix 5mm thick PVC sheet fillet of width 35mm for wall paneling inclusive of fixing on to wall to make PVC Frame as per specification complete all as specified and as directed by Engineer-in-Charge. | 800.00 | Running Metre | 10.00 | Excess(+) | 1 | Full Conversion | INR | 0.00 | 0.00 | INR Zero Only | 50 | Supply & Fix 5mm thick PVC sheet fillet of width 35mm for wall paneling inclusive of fixing on to wall to make PVC Frame as per specification complete all as specified and as directed by Engineer-in-Charge. | 800 | Running Metre | |||||||||||||||||||||||||||||||||||||||
| 51 | M&L for exterior quality Aluminium Composite panel(ACP) wall claddind on eisting AL/ MS framework with GI brackets, ACP fixed on the existing frame work by folding edged of ACP panel (engraving the rear of ACP sheet) with CP angles, cleats and stainless steel screws forming groves at the periphery of ACP panel, such grooves filled with foam and silicon sealant etc complete with all materials (but including the cost of silicon sealant ), labour, scaffolding and all other incidental charges complete in all respect as per specification and direction of Engineer-in-charge. (mode of payment is on fonished surface area of ACP (b) 4mm thick (0.5mm Al +3.0mm LDPE +0.5mm Al. PVDF coating ) including taking down complete all as specified and as directed by Engineer-in-Charge. | 65.00 | SQUARE METRE | 10.00 | Excess(+) | 1 | Full Conversion | INR | 0.00 | 0.00 | INR Zero Only | 51 | M&L for exterior quality Aluminium Composite panel(ACP) wall claddind on eisting AL/ MS framework with GI brackets, ACP fixed on the existing frame work by folding edged of ACP panel (engraving the rear of ACP sheet) with CP angles, cleats and stainless steel screws forming groves at the periphery of ACP panel, such grooves filled with foam and silicon sealant etc complete with all materials (but including the cost of silicon sealant ), labour, scaffolding and all other incidental charges complete in all respect as per specification and direction of Engineer-in-charge. (mode of payment is on fonished surface area of ACP (b) 4mm thick (0.5mm Al +3.0mm LDPE +0.5mm Al. PVDF coating ) including taking down complete all as specified and as directed by Engineer-in-Charge. | 65 | SQUARE METRE | |||||||||||||||||||||||||||||||||||||||
| 52 | Supply and fix in repairs vitreous china wash down, white, water closet pan (pedestal pattern) with 'P' of 'S' trap (of size 465mm x 355mm x 265mm),including plastic seat cover to match with colour of WC, health faucet, toilet paper holder, closed pattern with flat bottom & cover and chromium plated mild steel or aluminium anodized hinging device including connecting to trap and flushing pipe, anti-syphonage pipe etc complete all as specified and directed by Engineer-in-Charge. Make :CERA/ RAK Ceramics/ Parryware/ Hindware/ Neyveli Ceramics (Neycer)/ Jaquar/ Kajaria (KEROVIT) | 2.00 | EACH | 10.00 | Excess(+) | 1 | Full Conversion | INR | 0.00 | 0.00 | INR Zero Only | 52 | Supply and fix in repairs vitreous china wash down, white, water closet pan (pedestal pattern) with 'P' of 'S' trap (of size 465mm x 355mm x 265mm),including plastic seat cover to match with colour of WC, health faucet, toilet paper holder, closed pattern with flat bottom & cover and chromium plated mild steel or aluminium anodized hinging device including connecting to trap and flushing pipe, anti-syphonage pipe etc complete all as specified and directed by Engineer-in-Charge. Make :CERA/ RAK Ceramics/ Parryware/ Hindware/ Neyveli Ceramics (Neycer)/ Jaquar/ Kajaria (KEROVIT) | 2 | EACH | |||||||||||||||||||||||||||||||||||||||
| 53 | Supply and fix in repair vitreous china squatting pan Orissa pattern of size 580 x 440mm white with integral foot rest, 'P' or 'S' trap front and back inlet and including connection to trap and to flushing pipe, anti syphonage pipe etc (excluding flushing cistern & flush pipe) all as specified and as directed by Engineer-in-Charge. Make : Cera/Hindustan/Parryware/Jaguar/Hindware/Johnson | 4.00 | EACH | 10.00 | Excess(+) | 1 | Full Conversion | INR | 0.00 | 0.00 | INR Zero Only | 53 | Supply and fix in repair vitreous china squatting pan Orissa pattern of size 580 x 440mm white with integral foot rest, 'P' or 'S' trap front and back inlet and including connection to trap and to flushing pipe, anti syphonage pipe etc (excluding flushing cistern & flush pipe) all as specified and as directed by Engineer-in-Charge. Make : Cera/Hindustan/Parryware/Jaguar/Hindware/Johnson | 4 | EACH | |||||||||||||||||||||||||||||||||||||||
| 54 | Supply and fix in repairs PVC valveless, syphonic action type low level flushing cistern 10 ltr capacity white with inlet ball valve, float and handle including brackets, flush pipe of polyethylene of low or high density or PVC 32mm dia including connection to pipe and fixing of chains and pull or lever complete all as specified and as directed. Make : CERA/ RAK Ceramics/ Parryware/ Hindware/ Neyveli Ceramics (Neycer)/ Jaquar/ Kajaria (KEROVIT) | 4.00 | EACH | 10.00 | Excess(+) | 1 | Full Conversion | INR | 0.00 | 0.00 | INR Zero Only | 54 | Supply and fix in repairs PVC valveless, syphonic action type low level flushing cistern 10 ltr capacity white with inlet ball valve, float and handle including brackets, flush pipe of polyethylene of low or high density or PVC 32mm dia including connection to pipe and fixing of chains and pull or lever complete all as specified and as directed. Make : CERA/ RAK Ceramics/ Parryware/ Hindware/ Neyveli Ceramics (Neycer)/ Jaquar/ Kajaria (KEROVIT) | 4 | EACH | |||||||||||||||||||||||||||||||||||||||
| 55 | Supply and fix in repairs vitreous china wash hand basin, white, flat back of size 550 mm x 400 mm excluding taps, waste chain and plug and porcelain stopper including brackets, chromium plated waste coupling, waste fitting etc, cutting for and pinning in ends of brackets, connecting to supply and waste pipe complete as specified and directed by Engineer-in-Charge. Make : Cera/ Hindustan/ Parryware/ Jaguar/ Hindware/ Johnson Note:- Pillar taps, waste fittings, PVC connection, PVC waste pipe shall be measured and paid separately. | 4.00 | EACH | 10.00 | Excess(+) | 1 | Full Conversion | INR | 0.00 | 0.00 | INR Zero Only | 55 | Supply and fix in repairs vitreous china wash hand basin, white, flat back of size 550 mm x 400 mm excluding taps, waste chain and plug and porcelain stopper including brackets, chromium plated waste coupling, waste fitting etc, cutting for and pinning in ends of brackets, connecting to supply and waste pipe complete as specified and directed by Engineer-in-Charge. Make : Cera/ Hindustan/ Parryware/ Jaguar/ Hindware/ Johnson Note:- Pillar taps, waste fittings, PVC connection, PVC waste pipe shall be measured and paid separately. | 4 | EACH | |||||||||||||||||||||||||||||||||||||||
| 56 | Supply and fix in repairs pillar taps fancy type cast copper alloy with capstan head, chromium plated, screwed down high pressure, with or without lettered ‘hot’ or ‘cold’ with long screwed shanks and fly nuts, screwed for iron pipes, 15mm bore complete all as specified and directed by Engineer-in-Charge. Make : Jaquar/ Marc/ CERA/ Kohler/ Player | 4.00 | EACH | 10.00 | Excess(+) | 1 | Full Conversion | INR | 0.00 | 0.00 | INR Zero Only | 56 | Supply and fix in repairs pillar taps fancy type cast copper alloy with capstan head, chromium plated, screwed down high pressure, with or without lettered ‘hot’ or ‘cold’ with long screwed shanks and fly nuts, screwed for iron pipes, 15mm bore complete all as specified and directed by Engineer-in-Charge. Make : Jaquar/ Marc/ CERA/ Kohler/ Player | 4 | EACH | |||||||||||||||||||||||||||||||||||||||
| 57 | Supply and fix in repairs concealed stop valve, cast copper alloy, fancy type, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipes or for unions of 15mm bore complete all as specified and directed by Engineer-in-Charge Make : Jaquar/ Marc/ CERA/ Kohler/ Player | 10.00 | EACH | 10.00 | Excess(+) | 1 | Full Conversion | INR | 0.00 | 0.00 | INR Zero Only | 57 | Supply and fix in repairs concealed stop valve, cast copper alloy, fancy type, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipes or for unions of 15mm bore complete all as specified and directed by Engineer-in-Charge Make : Jaquar/ Marc/ CERA/ Kohler/ Player | 10 | EACH | |||||||||||||||||||||||||||||||||||||||
| 58 | Supply and fix in repairs 15mm bore bib taps, fancy type, chromium plated, cast copper alloy, with crutch or butterfly handle screwed down, screwed for iron pipe or for brass ferrule all as specified and as directed by Engineer-in-Charge. Make : Jaquar/ Marc/ CERA/ Kohler/ Player | 9.00 | EACH | 10.00 | Excess(+) | 1 | Full Conversion | INR | 0.00 | 0.00 | INR Zero Only | 58 | Supply and fix in repairs 15mm bore bib taps, fancy type, chromium plated, cast copper alloy, with crutch or butterfly handle screwed down, screwed for iron pipe or for brass ferrule all as specified and as directed by Engineer-in-Charge. Make : Jaquar/ Marc/ CERA/ Kohler/ Player | 9 | EACH | |||||||||||||||||||||||||||||||||||||||
| 59 | Supply and fix in repairs CI floor trap outlet dia 100mm, plain with gratings including jointing to waste pipe fixed in cement concrete type B1 (1:2:4)etc complete all as specified and as directed by Engineer-in-Charge. Make : Prince / Finolex / Supreme/Astral | 4.00 | EACH | 10.00 | Excess(+) | 1 | Full Conversion | INR | 0.00 | 0.00 | INR Zero Only | 59 | Supply and fix in repairs CI floor trap outlet dia 100mm, plain with gratings including jointing to waste pipe fixed in cement concrete type B1 (1:2:4)etc complete all as specified and as directed by Engineer-in-Charge. Make : Prince / Finolex / Supreme/Astral | 4 | EACH | |||||||||||||||||||||||||||||||||||||||
| 60 | Supply and fix in repairs CI nahani trap 100mm with grating including jointing with waste pipe, fixed in cement concrete 1:2:4 type B1, Complete all as specified and as directed by Engineer-in-Charge. Make : NECO/Sighal iron Foundry/Bengal iron Co/Dhatu Udyog/Kapilansh | 5.00 | EACH | 100.00 | Excess(+) | 1 | Full Conversion | INR | 0.00 | 0.00 | INR Zero Only | 60 | Supply and fix in repairs CI nahani trap 100mm with grating including jointing with waste pipe, fixed in cement concrete 1:2:4 type B1, Complete all as specified and as directed by Engineer-in-Charge. Make : NECO/Sighal iron Foundry/Bengal iron Co/Dhatu Udyog/Kapilansh | 5 | EACH | |||||||||||||||||||||||||||||||||||||||
| 61 | Taking up or down steel tubing and connections for 15mm bore of pipe complete all as specified and directed. | 50.00 | RUNNING METRE | 100.00 | Excess(+) | 1 | Full Conversion | INR | 0.00 | 0.00 | INR Zero Only | 61 | Taking up or down steel tubing and connections for 15mm bore of pipe complete all as specified and directed. | 50 | RUNNING METRE | |||||||||||||||||||||||||||||||||||||||
| 62 | Taking up or down steel tubing and connections for 20mm bore of pipe complete all as specified and directed. | 80.00 | RUNNING METRE | 100.00 | Excess(+) | 1 | Full Conversion | INR | 0.00 | 0.00 | INR Zero Only | 62 | Taking up or down steel tubing and connections for 20mm bore of pipe complete all as specified and directed. | 80 | RUNNING METRE | |||||||||||||||||||||||||||||||||||||||
| 63 | Taking up or down steel tubing and connections for 25mm bore of pipe complete all as specified and directed. | 50.00 | RUNNING METRE | 100.00 | Excess(+) | 1 | Full Conversion | INR | 0.00 | 0.00 | INR Zero Only | 63 | Taking up or down steel tubing and connections for 25mm bore of pipe complete all as specified and directed. | 50 | RUNNING METRE | |||||||||||||||||||||||||||||||||||||||
| 64 | Supply and fix mild steel tubing medium grade 15mm, galvanized iron with all fittings such as Tees, elbows, sockets, bends, unions, short pieces, nipples, brass nuts and diminishing pieces complete all as per IS 1239 including fixed to wall / ceiling or laid in floor with suitable size GI clampss complete all as specified and as directed by Engineer-in-Charge. Make: Tata / Jindal / Surya Prakash / Zenith | 50.00 | RUNNING METRE | 10.00 | Excess(+) | 1 | Full Conversion | INR | 0.00 | 0.00 | INR Zero Only | 64 | Supply and fix mild steel tubing medium grade 15mm, galvanized iron with all fittings such as Tees, elbows, sockets, bends, unions, short pieces, nipples, brass nuts and diminishing pieces complete all as per IS 1239 including fixed to wall / ceiling or laid in floor with suitable size GI clampss complete all as specified and as directed by Engineer-in-Charge. Make: Tata / Jindal / Surya Prakash / Zenith | 50 | RUNNING METRE | |||||||||||||||||||||||||||||||||||||||
| 65 | Supply and fix mild steel tubing medium grade 20mm, galvanized iron with all fittings such as Tees, elbows, sockets, bends, unions, short pieces, nipples, brass nuts and diminishing pieces complete all as per IS 1239 including fixed to wall / ceiling or laid in floor with suitable size GI clampss complete all as specified and as directed by Engineer-in-Charge. Make: Tata / Jindal / Surya Prakash / Zenith | 80.00 | RUNNING METRE | 10.00 | Excess(+) | 1 | Full Conversion | INR | 0.00 | 0.00 | INR Zero Only | 65 | Supply and fix mild steel tubing medium grade 20mm, galvanized iron with all fittings such as Tees, elbows, sockets, bends, unions, short pieces, nipples, brass nuts and diminishing pieces complete all as per IS 1239 including fixed to wall / ceiling or laid in floor with suitable size GI clampss complete all as specified and as directed by Engineer-in-Charge. Make: Tata / Jindal / Surya Prakash / Zenith | 80 | RUNNING METRE | |||||||||||||||||||||||||||||||||||||||
| 66 | Supply and fix mild steel tubing medium grade 25mm, galvanized iron with all fittings such as Tees, elbows, sockets, bends, unions, short pieces, nipples, brass nuts and diminishing pieces complete all as per IS 1239 including fixed to wall / ceiling or laid in floor with suitable size GI clampss complete all as specified and as directed by Engineer-in-Charge. Make: Tata / Jindal / Surya Prakash / Zenith | 50.00 | RUNNING METRE | 10.00 | Excess(+) | 1 | Full Conversion | INR | 0.00 | 0.00 | INR Zero Only | 66 | Supply and fix mild steel tubing medium grade 25mm, galvanized iron with all fittings such as Tees, elbows, sockets, bends, unions, short pieces, nipples, brass nuts and diminishing pieces complete all as per IS 1239 including fixed to wall / ceiling or laid in floor with suitable size GI clampss complete all as specified and as directed by Engineer-in-Charge. Make: Tata / Jindal / Surya Prakash / Zenith | 50 | RUNNING METRE | |||||||||||||||||||||||||||||||||||||||
| 67 | Supply and fix in repairs rotational moulded polyethylene water storage tank (Cylindrical vertical with closed stop), HDPE, triple layered with ISI marked of 1000 ltrs capacity with inlet & outlet connections, tank nipple, bends, sockets etc, hoisted and fixed in position complete all as specified and as directed by Engineer-in-Charge. Make : Sintex/ Polycon/ Rotex | 11.00 | EACH | 10.00 | Excess(+) | 1 | Full Conversion | INR | 0.00 | 0.00 | INR Zero Only | 67 | Supply and fix in repairs rotational moulded polyethylene water storage tank (Cylindrical vertical with closed stop), HDPE, triple layered with ISI marked of 1000 ltrs capacity with inlet & outlet connections, tank nipple, bends, sockets etc, hoisted and fixed in position complete all as specified and as directed by Engineer-in-Charge. Make : Sintex/ Polycon/ Rotex | 11 | EACH | |||||||||||||||||||||||||||||||||||||||
| 68 | Supply and fix in repairs rotational moulded polyethylene water storage tank (Cylindrical vertical with closed stop), HDPE, triple layered with ISI marked of 1000 ltrs capacity with inlet & outlet connections, tank nipple, bends, sockets etc, hoisted and fixed in position complete all as specified and as directed by Engineer-in-Charge. Make : Sintex/ Polycon/ Rotex | 10.00 | EACH | 10.00 | Excess(+) | 1 | Full Conversion | INR | 0.00 | 0.00 | INR Zero Only | 68 | Supply and fix in repairs rotational moulded polyethylene water storage tank (Cylindrical vertical with closed stop), HDPE, triple layered with ISI marked of 1000 ltrs capacity with inlet & outlet connections, tank nipple, bends, sockets etc, hoisted and fixed in position complete all as specified and as directed by Engineer-in-Charge. Make : Sintex/ Polycon/ Rotex | 10 | EACH | |||||||||||||||||||||||||||||||||||||||
| 69 | Supply and fix in repairs gun metal gate valve, 20mm bore, with iron wheel head, screwed both ends for iron pipes, ISI marked and fixed with suitable size of new union complete all as specified and as directed by Engineer-in-Charge. Make : Leader/ Bir/ Zoloto/ Kirloskar | 20.00 | EACH | 10.00 | Excess(+) | 1 | Full Conversion | INR | 0.00 | 0.00 | INR Zero Only | 69 | Supply and fix in repairs gun metal gate valve, 20mm bore, with iron wheel head, screwed both ends for iron pipes, ISI marked and fixed with suitable size of new union complete all as specified and as directed by Engineer-in-Charge. Make : Leader/ Bir/ Zoloto/ Kirloskar | 20 | EACH | |||||||||||||||||||||||||||||||||||||||
| 70 | Supply and fix in repairs Ball Valves high pressure of PTMT with epoxy coated aluminium rod & high-density plastic ball screwed for iron pipe and fixed of 20mm bore (Minimum weight - 210 gms) complete all as specified and as directed by Engineer-in-Charge Make- Jaypee /GMP / Neta/ Zolota/Prayag Polymer/ Symet | 20.00 | EACH | 10.00 | Excess(+) | 1 | Full Conversion | INR | 0.00 | 0.00 | INR Zero Only | 70 | Supply and fix in repairs Ball Valves high pressure of PTMT with epoxy coated aluminium rod & high-density plastic ball screwed for iron pipe and fixed of 20mm bore (Minimum weight - 210 gms) complete all as specified and as directed by Engineer-in-Charge Make- Jaypee /GMP / Neta/ Zolota/Prayag Polymer/ Symet | 20 | EACH | |||||||||||||||||||||||||||||||||||||||
| 71 | Note: Deduct Credit for demolished / dismantled material of Rs. (-) 29,380.00 (Minus) as listed in Schedule of Credit. Tenderers will not quote against this item being a tentative amount to be considered to arrive at the 'Contract Sum' | 71 | Note: Deduct Credit for demolished / dismantled material of Rs. (-) 29,380.00 (Minus) as listed in Schedule of Credit. Tenderers will not quote against this item being a tentative amount to be considered to arrive at the 'Contract Sum' | |||||||||||||||||||||||||||||||||||||||||||||||||||
| Total in Figures | 0.00 | 0.00 | INR Zero Only | |||||||||||||||||||||||||||||||||||||||||||||||||||
| Quoted Rate in Figures | Select | 0.0000 | 0.0000 | Zero Only | ||||||||||||||||||||||||||||||||||||||||||||||||||
| Quoted Rate in Words | INR Zero Only |
Andaman & Nicobar Tenders |Andhra Pradesh Tenders |Arunachal Pradesh Tenders |Assam Tenders |Bihar Tenders |Chandigarh Tenders |Chhattisgarh Tenders |Dadra & Nagar Haveli Tenders |Daman & Diu Tenders |Delhi Tenders |Goa Tenders |Gujarat Tenders |Haryana Tenders |Himachal Pradesh Tenders |Jammu & Kashmir Tenders |Jharkhand Tenders |Karnataka Tenders |Kerala Tenders |Ladakh Tenders |Lakshadweep Tenders |Madhya Pradesh Tenders |Maharashtra Tenders |Manipur Tenders |Meghalaya Tenders |Mizoram Tenders |Nagaland Tenders |Odisha Tenders |Pondicherry Tenders |Punjab Tenders |Rajasthan Tenders |Sikkim Tenders |Tamil Nadu Tenders |Telangana Tenders |Tripura Tenders |Uttarakhand Tenders |Uttar Pradesh Tenders |West Bengal Tenders |