Items - REPAIR MAINT OF CENTRIFUGAL PUMP SETS, MONOBLOCK PUMP SET, SUBMERSIBLE PUMP SET AND CONNECTED ITEMS OF ZONE A UNDER AGE EM-I OF GE DEHRADUN
| Item Rate BoQ | ||||||||||||||||||||||||||||||||||||||||||||||||||||||
| BoQ_Ver3.0 | Item Rate | Normal | INR Only | INR | ||||||||||||||||||||||||||||||||||||||||||||||||||
| Select, Excess (+), Less (-) | Less (-) | |||||||||||||||||||||||||||||||||||||||||||||||||||||
| Tender Inviting Authority: COMMANDER WORKS ENGINEER DEHRADUN | ||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Name of Work : REPAIR/MAINT OF CENTRIFUGAL PUMP SETS, MONOBLOCK PUMP SET, SUBMERSIBLE PUMP SET AND CONNECTED ITEMS OF ZONE ‘A’ UNDER AGE E/M-I OF GE DEHRADUN | ||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Contract No : CWE/DDN/82 OF 2025-26 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Bidder Name : | ||||||||||||||||||||||||||||||||||||||||||||||||||||||
| PRICE SCHEDULE (This BOQ template must not be modified/replaced by the bidder and the same should be uploaded after filling the relevent columns, else the bidder is liable to be rejected for this tender. Bidders are allowed to enter the Bidder Name and Values only ) | ||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Sl. No. | Item Description | Item Code / Make | Quantity | Units | Estimated Rate | Addition / Deduction | Addition / Deduction Values | Currency Convertion against each Item | Quoted Currency in INR / Other Currency | RATE In Figures To be entered by the Bidder Rs. P | Excise Duty | VAT | Freight Charges ( Unloading & Stacking) | Any Other Taxes/Duties/Levies | Other Taxes 2 | IIIrd Party i.e DGS&D / RITES etc Inspection Charges @0.34%+Service Tax | Less for Cenvat Credit,if any respect of Supplies Under full Excise Duty Category | TOTAL AMOUNT Without Taxes | TOTAL AMOUNT In Figures | TOTAL AMOUNT In Words | ||||||||||||||||||||||||||||||||||
| 1 | 2 | 3 | 3 | 4 | 6 | 7 | 8 | 9 | 10 | 11 | 12 | 5 | 14 | 15 | 16 | 17 | 18 | 19 | 20 | 21 | 22 | 23 | 24 | 25 | 26 | 27 | 28 | 29 | 30 | 31 | 32 | 33 | 34 | 35 | 36 | 37 | 38 | 39 | 40 | 41 | 42 | 43 | 44 | 45 | 46 | 47 | 48 | 49 | 50 | 51 | 52 | 53 | 6 | 7 |
| 1.00 | Taking down centrifugal pumping set alonwith base frame including disconnection of inlet suction and discharge pipe line, pump coupling for Centrigugal Pump Set of any capacity for repair the PCC foundation and after repair the PCC foundation the centrifugal pumping set alonwith base frame reinstall on fondation with proper alignment with motor and reconnection of inlet suction and discharge pipe line, pump coupling of Centrigugal Pump Set duly alignment and testing on full discharge complete all as specified and directed. | 6.00 | Each Job | Excess(+) | 1 | Full Conversion | INR | 0.00 | 0.00 | INR Zero Only | 1.02 | Construction of chamber for 100mm sluice plates | item2 | 213 | Nos | |||||||||||||||||||||||||||||||||||||||
| 2.00 | M&L for PCC 1:2:4 type B-1 using (20 mm graded stone aggregate) as in mass concrete (for pump set foundation/DG set foundation/LT Panel foundation etc) and similar work including necessary form work finished even and smooth including demolition of wxisting cement concrete of any desciption and in any position complete all as specified and directed. Note:- PCC foundation shall be done as per existing and suitable for available centrifugal pump set. | 1.50 | Cum | Excess(+) | 1 | Full Conversion | INR | 0.00 | 0.00 | INR Zero Only | 1.02 | Construction of chamber for 100mm sluice plates | item2 | 213 | Nos | |||||||||||||||||||||||||||||||||||||||
| 3.00 | Supply only bearing grease in 5 kg packing. | 50.00 | Kg | Excess(+) | 1 | Full Conversion | INR | 0.00 | 0.00 | INR Zero Only | 1.02 | Construction of chamber for 100mm sluice plates | item2 | 213 | Nos | |||||||||||||||||||||||||||||||||||||||
| 4.00 | Supply only copper tube (Thimbles) terminal heavy duty of size 25 Sqmm. | 20.00 | Each | Excess(+) | 1 | Full Conversion | INR | 0.00 | 0.00 | INR Zero Only | 1.02 | Construction of chamber for 100mm sluice plates | item2 | 213 | Nos | |||||||||||||||||||||||||||||||||||||||
| 5.00 | Supply only copper tube (Thimbles) terminal heavy duty of size 35 Sqmm. | 35.00 | Each | Excess(+) | 1 | Full Conversion | INR | 0.00 | 0.00 | INR Zero Only | 1.02 | Construction of chamber for 100mm sluice plates | item2 | 213 | Nos | |||||||||||||||||||||||||||||||||||||||
| 6.00 | Supply only copper tube (Thimbles) terminal heavy duty of size 50 Sqmm | 30.00 | Each | Excess(+) | 1 | Full Conversion | INR | 0.00 | 0.00 | INR Zero Only | 1.02 | Construction of chamber for 100mm sluice plates | item2 | 213 | Nos | |||||||||||||||||||||||||||||||||||||||
| 7.00 | Supply only copper tube (Thimbles) terminal heavy duty of size 70 Sqmm | 18.00 | Each | Excess(+) | 1 | Full Conversion | INR | 0.00 | 0.00 | INR Zero Only | 1.02 | Construction of chamber for 100mm sluice plates | item2 | 213 | Nos | |||||||||||||||||||||||||||||||||||||||
| 8.00 | Supply only copper tube (Thimbles) terminal heavy duty of size 95 Sqmm | 30.00 | Each | Excess(+) | 1 | Full Conversion | INR | 0.00 | 0.00 | INR Zero Only | ||||||||||||||||||||||||||||||||||||||||||||
| 9.00 | M&L for filling crushed / broken stone aggreagate of gauge exc 40 mm and not exc 80mm in layer thickness, 150mm laid in sub station yard complete all as specified and as directed. | 28.00 | Cum | Excess(+) | 1 | Full Conversion | INR | 0.00 | 0.00 | INR Zero Only | 1.02 | Construction of chamber for 100mm sluice plates | item2 | 213 | Nos | |||||||||||||||||||||||||||||||||||||||
| 10.00 | Surface excavation in soft/loose soil n exc 30cm deep and averaging 15 cm deep and getting out for surface dressing complete all as specified and directed. Note:- For surface excavation to cut the hurbs and shurbs from site is the responsibility of the contractor, rate of cutting of hurbs and shurbs is deemed to be included in the qouted rate of this item. | 150.00 | Sqm | Excess(+) | 1 | Full Conversion | INR | 0.00 | 0.00 | INR Zero Only | 1.02 | Construction of chamber for 100mm sluice plates | item2 | 213 | Nos | |||||||||||||||||||||||||||||||||||||||
| 11.00 | Supply and laying lowering & jointing with submersible pump lead including jointing material PVC insulated and PVC sheathed submersible flat cable multistranded copper conductor 70 Sqmm 3 core, 1100 volt grade including cable tieing arragngement with two places at each length (3mtr) of column pipe including taking down old complete all as specified and as directed. | 120.00 | RM | Excess(+) | 1 | Full Conversion | INR | 0.00 | 0.00 | INR Zero Only | 1.02 | Construction of chamber for 100mm sluice plates | item2 | 213 | Nos | |||||||||||||||||||||||||||||||||||||||
| 12.00 | All as per item No. 11 above but 50 sqmm, 3 core | 210.00 | RM | Excess(+) | 1 | Full Conversion | INR | 0.00 | 0.00 | INR Zero Only | 1.02 | Construction of chamber for 100mm sluice plates | item2 | 213 | Nos | |||||||||||||||||||||||||||||||||||||||
| 13.00 | All as per item No. 11 above but 35 sqmm, 3 core | 240.00 | RM | Excess(+) | 1 | Full Conversion | INR | 0.00 | 0.00 | INR Zero Only | 1.02 | Construction of chamber for 100mm sluice plates | item2 | 213 | Nos | |||||||||||||||||||||||||||||||||||||||
| 14.00 | All as per item No. 11 above but 25 sqmm, 3 core | 180.00 | RM | Excess(+) | 1 | Full Conversion | INR | 0.00 | 0.00 | INR Zero Only | 1.02 | Construction of chamber for 100mm sluice plates | item2 | 213 | Nos | |||||||||||||||||||||||||||||||||||||||
| 15.00 | M&L for dismantling electrically and taking down unserviceable fully automatic starter any type dry/ ATS type, from base frame, for cleaning and refixing the serviceable parts back after repair and replacement of unserviceable parts for the 15 HP to 50 HP capacity complete all as specified and directed. (Note: Spare parts required for replacement shall be measured & paid for separately under respective item). | 4.00 | Each | Excess(+) | 1 | Full Conversion | INR | 0.00 | 0.00 | INR Zero Only | ||||||||||||||||||||||||||||||||||||||||||||
| 16.00 | All as per item No. 15 above but for the 60.0 HP to 100.0 HP capacity complete all as specified and directed. (Note: Spare parts required for replacement shall be measured & paid for separately under respective item). | 5.00 | Each | Excess(+) | 1 | Full Conversion | INR | 0.00 | 0.00 | INR Zero Only | 1.02 | Construction of chamber for 100mm sluice plates | item2 | 213 | Nos | |||||||||||||||||||||||||||||||||||||||
| 17.00 | Supply only following spares of fully automatic starter:- | 1.02 | Construction of chamber for 100mm sluice plates | item2 | 213 | Nos | ||||||||||||||||||||||||||||||||||||||||||||||||
| 17.01 | Fixed power copper contacts suitable for 60 HP to 75 HP star delta starter. | 5.00 | Each | Excess(+) | 1 | Full Conversion | INR | 0.00 | 0.00 | INR Zero Only | 1.02 | Construction of chamber for 100mm sluice plates | item2 | 213 | Nos | |||||||||||||||||||||||||||||||||||||||
| 17.02 | Moving power copper contacts suitable for 60 HP to 75 HP star delta starter. | 5.00 | Each | Excess(+) | 1 | Full Conversion | INR | 0.00 | 0.00 | INR Zero Only | 1.02 | Construction of chamber for 100mm sluice plates | item2 | 213 | Nos | |||||||||||||||||||||||||||||||||||||||
| 17.03 | Fixed power copper contacts suitable for 15 HP to 50 HP star delta starter. | 4.00 | Each | Excess(+) | 1 | Full Conversion | INR | 0.00 | 0.00 | INR Zero Only | 1.02 | Construction of chamber for 100mm sluice plates | item2 | 213 | Nos | |||||||||||||||||||||||||||||||||||||||
| 17.04 | Moving power copper contacts suitable for 15 HP to 50 HP star delta starter. | 4.00 | Each | Excess(+) | 1 | Full Conversion | INR | 0.00 | 0.00 | INR Zero Only | 1.02 | Construction of chamber for 100mm sluice plates | item2 | 213 | Nos | |||||||||||||||||||||||||||||||||||||||
| 17.05 | Auxiliary switch type -01 with 1 No-1 NC suitable for 60/80 HP star delta starter. | 5.00 | Each | Excess(+) | 1 | Full Conversion | INR | 0.00 | 0.00 | INR Zero Only | ||||||||||||||||||||||||||||||||||||||||||||
| 18.00 | S&F in replacement water pressure gauge glycerin filled stainless steel body of size 100 mm 0-10 kg/cm2 complete all as specified and directed. | 4.00 | Each | Excess(+) | 1 | Full Conversion | INR | 0.00 | 0.00 | INR Zero Only | 1.02 | Construction of chamber for 100mm sluice plates | item2 | 213 | Nos | |||||||||||||||||||||||||||||||||||||||
| 19.00 | S&F in replacement water pressure gauge glycerin filled stainless steel body of size 100 mm 0-7 kg/cm2 complete all as specified and directed. | 8.00 | Each | Excess(+) | 1 | Full Conversion | INR | 0.00 | 0.00 | INR Zero Only | 1.02 | Construction of chamber for 100mm sluice plates | item2 | 213 | Nos | |||||||||||||||||||||||||||||||||||||||
| 20.00 | Taking down old unserviceable ampere meter from existing panel board and S&F new digital/analog ampere meter (as suitable at site) for three phase AC supply with complete wiring connections complete all as specified and directed. | 5.00 | Each | Excess(+) | 1 | Full Conversion | INR | 0.00 | 0.00 | INR Zero Only | 1.01 | Supplying, Conveying and fixing spls. Including eart | item1 | 123.223 | Nos | |||||||||||||||||||||||||||||||||||||||
| 21.00 | Taking down old unserviceable volt meter from existing panel board and S&F new digital volt meter for three phase AC supply with complete wiring connections complete all as specified and directed. | 5.00 | Each | Excess(+) | 1 | Full Conversion | INR | 0.00 | 0.00 | INR Zero Only | 1.01 | Supplying, Conveying and fixing spls. Including eart | item1 | 123.223 | Nos | |||||||||||||||||||||||||||||||||||||||
| 22.00 | Disconnecting and taking down unserviceable electric motor of capacity 100 HP to 125 HP, 1450 RPM 3 Phase from base frame and shifting to workshop for rewinding opeing compete taking out Rotor assembly from starter carefully and cutting/cleaning burnt winding wire from startor, carefully reapirs to demage slots sinclduing Rewinding of starter with super enameled copper wire gauge same as original & Varnishing the same drying tapping with cotton tapes all electrical cionnections should be soldered properly, reassembling resifting & reinstallation at site inclduing testing at full load complete all as specifed & directed. | 2.00 | Each job | Excess(+) | 1 | Full Conversion | INR | 0.00 | 0.00 | INR Zero Only | 1.02 | Construction of chamber for 100mm sluice plates | item2 | 213 | Nos | |||||||||||||||||||||||||||||||||||||||
| 23.00 | All as per item No. 22 above but 75 HP to below 100 HP 1480 RPM 3 Phase complete all as specified and directed. | 2.00 | Each job | Excess(+) | 1 | Full Conversion | INR | 0.00 | 0.00 | INR Zero Only | ||||||||||||||||||||||||||||||||||||||||||||
| 24.00 | All as per item No. 22 above but 50 HP 1480 RPM 3 Phase complete all as specified and directed. | 3.00 | Each job | Excess(+) | 1 | Full Conversion | INR | 0.00 | 0.00 | INR Zero Only | ||||||||||||||||||||||||||||||||||||||||||||
| 25.00 | All as per item No. 22 above but 12.5 HP to 25 HP 1480 RPM 3 Phase complete all as specified and directed. | 2.00 | Each job | Excess(+) | 1 | Full Conversion | INR | 0.00 | 0.00 | INR Zero Only | ||||||||||||||||||||||||||||||||||||||||||||
| 26.00 | All as per item No. 22 above but 1.0 to 3.0 HP 1480 RPM 3 Phase complete all as specified and directed. | 1.00 | Each job | Excess(+) | 1 | Full Conversion | INR | 0.00 | 0.00 | INR Zero Only | 1.02 | Construction of chamber for 100mm sluice plates | item2 | 213 | Nos | |||||||||||||||||||||||||||||||||||||||
| 27.00 | Supply and fix bearing suitable for electric motor 100 HP to 125 HP complete all as specified and directed. | 5.00 | Each | Excess(+) | 1 | Full Conversion | INR | 0.00 | 0.00 | INR Zero Only | 1.02 | Construction of chamber for 100mm sluice plates | item2 | 213 | Nos | |||||||||||||||||||||||||||||||||||||||
| 28.00 | Supply and fix bearing suitable for electric motor 75 HP to below 100 HP complete all as specified and directed. | 6.00 | Each | Excess(+) | 1 | Full Conversion | INR | 0.00 | 0.00 | INR Zero Only | 1.02 | Construction of chamber for 100mm sluice plates | item2 | 213 | Nos | |||||||||||||||||||||||||||||||||||||||
| 29.00 | Supply and fix bearing suitable for electric motor 50HP complete all as specified and directed. | 6.00 | Each | Excess(+) | 1 | Full Conversion | INR | 0.00 | 0.00 | INR Zero Only | 1.02 | Construction of chamber for 100mm sluice plates | item2 | 213 | Nos | |||||||||||||||||||||||||||||||||||||||
| 30.00 | Supply and fix bearing suitable for electric motor 12.5 HP to 25 HP complete all as specified and directed. | 6.00 | Each | Excess(+) | 1 | Full Conversion | INR | 0.00 | 0.00 | INR Zero Only | 1.02 | Construction of chamber for 100mm sluice plates | item2 | 213 | Nos | |||||||||||||||||||||||||||||||||||||||
| 31.00 | Taking down centrifugal pumping set from base frame including disconnection of inlet suction and discharge pipe line, pump coupling for Centrigugal Pump Set of capacity 100 to 125 HPand shifting to workshop for repair and opening dismantling and overhauling complete parts, all parts cleaned by Kerosene oil neatly with and including replacement of defective spare parts by news parts including necessary welding machine/ grinding work if required at the time of refitting of spare into pump set and re-shifting, reinstallation on base frame with proper alignment with motor and testing on full discharge complete all as specified and directed. Note:- (i) Spare parts which are required to be replaced during repair shall be measured and paid separately in after as supply only rates,however fixing element shall be deemed to be included in the quoted rates of this item. (ii)Contractor shall ensure water pipe lines sealed by blocking with dead flange for the repair period if required (iii) Repair work of pump set will be carried out through authorised workshop / dealer only. | 2.00 | Each Job | Excess(+) | 1 | Full Conversion | INR | 0.00 | 0.00 | INR Zero Only | 1.02 | Construction of chamber for 100mm sluice plates | item2 | 213 | Nos | |||||||||||||||||||||||||||||||||||||||
| 32.00 | Supply only following spares parts to be replaced in repair of centrifugal pumping set multi stage type of capacity 100 to 125 HP under item No.31 here in above:- | 1.02 | Construction of chamber for 100mm sluice plates | item2 | 213 | Nos | ||||||||||||||||||||||||||||||||||||||||||||||||
| 32.01 | CI impeller | 2.00 | Each | Excess(+) | 1 | Full Conversion | INR | 0.00 | 0.00 | INR Zero Only | 1.02 | Construction of chamber for 100mm sluice plates | item2 | 213 | Nos | |||||||||||||||||||||||||||||||||||||||
| 32.02 | SS sleeve | 2.00 | Each | Excess(+) | 1 | Full Conversion | INR | 0.00 | 0.00 | INR Zero Only | 1.02 | Construction of chamber for 100mm sluice plates | item2 | 213 | Nos | |||||||||||||||||||||||||||||||||||||||
| 32.03 | CI bush | 2.00 | Each | Excess(+) | 1 | Full Conversion | INR | 0.00 | 0.00 | INR Zero Only | 1.02 | Construction of chamber for 100mm sluice plates | item2 | 213 | Nos | |||||||||||||||||||||||||||||||||||||||
| 32.04 | MS coupling complete with rubber tyre/ Star rubber bush complete. | 2.00 | Each | Excess(+) | 1 | Full Conversion | INR | 0.00 | 0.00 | INR Zero Only | 1.02 | Construction of chamber for 100mm sluice plates | item2 | 213 | Nos | |||||||||||||||||||||||||||||||||||||||
| 32.05 | CI neck ring | 2.00 | Each | Excess(+) | 1 | Full Conversion | INR | 0.00 | 0.00 | INR Zero Only | 1.02 | Construction of chamber for 100mm sluice plates | item2 | 213 | Nos | |||||||||||||||||||||||||||||||||||||||
| 32.06 | Ball bearing | 2.00 | Each | Excess(+) | 1 | Full Conversion | INR | 0.00 | 0.00 | INR Zero Only | 1.02 | Construction of chamber for 100mm sluice plates | item2 | 213 | Nos | |||||||||||||||||||||||||||||||||||||||
| 32.07 | Pump bearing housing | 2.00 | Each | Excess(+) | 1 | Full Conversion | INR | 0.00 | 0.00 | INR Zero Only | 1.02 | Construction of chamber for 100mm sluice plates | item2 | 213 | Nos | |||||||||||||||||||||||||||||||||||||||
| 32.08 | Gland pusher | 2.00 | Each | Excess(+) | 1 | Full Conversion | INR | 0.00 | 0.00 | INR Zero Only | 1.02 | Construction of chamber for 100mm sluice plates | item2 | 213 | Nos | |||||||||||||||||||||||||||||||||||||||
| 32.09 | Double check nut with studs complete | 8.00 | Each | Excess(+) | 1 | Full Conversion | INR | 0.00 | 0.00 | INR Zero Only | 1.02 | Construction of chamber for 100mm sluice plates | item2 | 213 | Nos | |||||||||||||||||||||||||||||||||||||||
| 32.10 | Impeller Key | 2.00 | Each | Excess(+) | 1 | Full Conversion | INR | 0.00 | 0.00 | INR Zero Only | 1.02 | Construction of chamber for 100mm sluice plates | item2 | 213 | Nos | |||||||||||||||||||||||||||||||||||||||
| 32.11 | Housing bush | 2.00 | Each | Excess(+) | 1 | Full Conversion | INR | 0.00 | 0.00 | INR Zero Only | 1.02 | Construction of chamber for 100mm sluice plates | item2 | 213 | Nos | |||||||||||||||||||||||||||||||||||||||
| 32.12 | Pump Shaft | 1.00 | Each | Excess(+) | 1 | Full Conversion | INR | 0.00 | 0.00 | INR Zero Only | 1.02 | Construction of chamber for 100mm sluice plates | item2 | 213 | Nos | |||||||||||||||||||||||||||||||||||||||
| 32.13 | MS coupling cover complete with nut bolt | 1.00 | Each | Excess(+) | 1 | Full Conversion | INR | 0.00 | 0.00 | INR Zero Only | 1.02 | Construction of chamber for 100mm sluice plates | item2 | 213 | Nos | |||||||||||||||||||||||||||||||||||||||
| 32.14 | Interstage ring | 1.00 | Set | Excess(+) | 1 | Full Conversion | INR | 0.00 | 0.00 | INR Zero Only | 1.02 | Construction of chamber for 100mm sluice plates | item2 | 213 | Nos | |||||||||||||||||||||||||||||||||||||||
| 32.15 | Seal stud packing O ring | 1.00 | Set | Excess(+) | 1 | Full Conversion | INR | 0.00 | 0.00 | INR Zero Only | 1.02 | Construction of chamber for 100mm sluice plates | item2 | 213 | Nos | |||||||||||||||||||||||||||||||||||||||
| 32.16 | Wear ring | 1.00 | Each | Excess(+) | 1 | Full Conversion | INR | 0.00 | 0.00 | INR Zero Only | 1.02 | Construction of chamber for 100mm sluice plates | item2 | 213 | Nos | |||||||||||||||||||||||||||||||||||||||
| 33.00 | All as per item No.31 above but capacity of 50 HP to 75 HP pump set complete all as specified and directed. | 4.00 | Each Job | Excess(+) | 1 | Full Conversion | INR | 0.00 | 0.00 | INR Zero Only | 1.02 | Construction of chamber for 100mm sluice plates | item2 | 213 | Nos | |||||||||||||||||||||||||||||||||||||||
| 34.00 | Supply only following spares parts to be replaced as repair to centrifugal pumping set multi stage type of capacity 50HP to 75 HP under item No.33 here in above:- | 1.02 | Construction of chamber for 100mm sluice plates | item2 | 213 | Nos | ||||||||||||||||||||||||||||||||||||||||||||||||
| 34.01 | CI impeller | 4.00 | Each | Excess(+) | 1 | Full Conversion | INR | 0.00 | 0.00 | INR Zero Only | 1.02 | Construction of chamber for 100mm sluice plates | item2 | 213 | Nos | |||||||||||||||||||||||||||||||||||||||
| 34.02 | SS sleeve | 4.00 | Each | Excess(+) | 1 | Full Conversion | INR | 0.00 | 0.00 | INR Zero Only | 1.02 | Construction of chamber for 100mm sluice plates | item2 | 213 | Nos | |||||||||||||||||||||||||||||||||||||||
| 34.03 | CI bush | 4.00 | Each | Excess(+) | 1 | Full Conversion | INR | 0.00 | 0.00 | INR Zero Only | 1.02 | Construction of chamber for 100mm sluice plates | item2 | 213 | Nos | |||||||||||||||||||||||||||||||||||||||
| 34.04 | MS coupling complete with rubber tyre/ Star rubber bush. | 2.00 | Each | Excess(+) | 1 | Full Conversion | INR | 0.00 | 0.00 | INR Zero Only | 1.02 | Construction of chamber for 100mm sluice plates | item2 | 213 | Nos | |||||||||||||||||||||||||||||||||||||||
| 34.05 | CI neck ring | 2.00 | Each | Excess(+) | 1 | Full Conversion | INR | 0.00 | 0.00 | INR Zero Only | 1.02 | Construction of chamber for 100mm sluice plates | item2 | 213 | Nos | |||||||||||||||||||||||||||||||||||||||
| 34.06 | Ball bearing | 4.00 | Each | Excess(+) | 1 | Full Conversion | INR | 0.00 | 0.00 | INR Zero Only | 1.02 | Construction of chamber for 100mm sluice plates | item2 | 213 | Nos | |||||||||||||||||||||||||||||||||||||||
| 34.07 | Pump bearing housing | 2.00 | Each | Excess(+) | 1 | Full Conversion | INR | 0.00 | 0.00 | INR Zero Only | 1.02 | Construction of chamber for 100mm sluice plates | item2 | 213 | Nos | |||||||||||||||||||||||||||||||||||||||
| 34.08 | Gland pusher | 2.00 | Each | Excess(+) | 1 | Full Conversion | INR | 0.00 | 0.00 | INR Zero Only | 1.02 | Construction of chamber for 100mm sluice plates | item2 | 213 | Nos | |||||||||||||||||||||||||||||||||||||||
| 34.09 | Double check nut with studs complete | 4.00 | Each | Excess(+) | 1 | Full Conversion | INR | 0.00 | 0.00 | INR Zero Only | 1.02 | Construction of chamber for 100mm sluice plates | item2 | 213 | Nos | |||||||||||||||||||||||||||||||||||||||
| 34.10 | Impeller Key | 2.00 | Each | Excess(+) | 1 | Full Conversion | INR | 0.00 | 0.00 | INR Zero Only | 1.02 | Construction of chamber for 100mm sluice plates | item2 | 213 | Nos | |||||||||||||||||||||||||||||||||||||||
| 34.11 | Housing bush | 2.00 | Each | Excess(+) | 1 | Full Conversion | INR | 0.00 | 0.00 | INR Zero Only | 1.02 | Construction of chamber for 100mm sluice plates | item2 | 213 | Nos | |||||||||||||||||||||||||||||||||||||||
| 34.12 | Pump Shaft | 2.00 | Each | Excess(+) | 1 | Full Conversion | INR | 0.00 | 0.00 | INR Zero Only | 1.02 | Construction of chamber for 100mm sluice plates | item2 | 213 | Nos | |||||||||||||||||||||||||||||||||||||||
| 34.13 | MS coupling cover complete with nut bolt | 2.00 | Each | Excess(+) | 1 | Full Conversion | INR | 0.00 | 0.00 | INR Zero Only | 1.02 | Construction of chamber for 100mm sluice plates | item2 | 213 | Nos | |||||||||||||||||||||||||||||||||||||||
| 35.00 | All as per item No.31 above but capacity of 12.5 HP to 25 HP pump set complete all as specified and directed. | 4.00 | Each | Excess(+) | 1 | Full Conversion | INR | 0.00 | 0.00 | INR Zero Only | 1.02 | Construction of chamber for 100mm sluice plates | item2 | 213 | Nos | |||||||||||||||||||||||||||||||||||||||
| 36.00 | Supply only following spares parts to be replaced as repair to centrifugal Pumping Set of capacity 12.5 HP to 25 HP, multi stage under item No.35 here in above:- | 1.02 | Construction of chamber for 100mm sluice plates | item2 | 213 | Nos | ||||||||||||||||||||||||||||||||||||||||||||||||
| 36.01 | CI impeller | 4.00 | Each | Excess(+) | 1 | Full Conversion | INR | 0.00 | 0.00 | INR Zero Only | 1.02 | Construction of chamber for 100mm sluice plates | item2 | 213 | Nos | |||||||||||||||||||||||||||||||||||||||
| 36.02 | SS sleeve | 4.00 | Each | Excess(+) | 1 | Full Conversion | INR | 0.00 | 0.00 | INR Zero Only | 1.02 | Construction of chamber for 100mm sluice plates | item2 | 213 | Nos | |||||||||||||||||||||||||||||||||||||||
| 36.03 | CI bush | 4.00 | Each | Excess(+) | 1 | Full Conversion | INR | 0.00 | 0.00 | INR Zero Only | 1.02 | Construction of chamber for 100mm sluice plates | item2 | 213 | Nos | |||||||||||||||||||||||||||||||||||||||
| 36.04 | MS coupling complete with rubber tyre/ Star rubber bush. | 4.00 | Each | Excess(+) | 1 | Full Conversion | INR | 0.00 | 0.00 | INR Zero Only | 1.02 | Construction of chamber for 100mm sluice plates | item2 | 213 | Nos | |||||||||||||||||||||||||||||||||||||||
| 36.05 | CI neck ring | 4.00 | Each | Excess(+) | 1 | Full Conversion | INR | 0.00 | 0.00 | INR Zero Only | 1.02 | Construction of chamber for 100mm sluice plates | item2 | 213 | Nos | |||||||||||||||||||||||||||||||||||||||
| 36.06 | Ball bearing | 8.00 | Each | Excess(+) | 1 | Full Conversion | INR | 0.00 | 0.00 | INR Zero Only | 1.02 | Construction of chamber for 100mm sluice plates | item2 | 213 | Nos | |||||||||||||||||||||||||||||||||||||||
| 36.07 | Pump bearing housing | 4.00 | Each | Excess(+) | 1 | Full Conversion | INR | 0.00 | 0.00 | INR Zero Only | 1.02 | Construction of chamber for 100mm sluice plates | item2 | 213 | Nos | |||||||||||||||||||||||||||||||||||||||
| 36.08 | Gland pusher | 2.00 | Each | Excess(+) | 1 | Full Conversion | INR | 0.00 | 0.00 | INR Zero Only | 1.02 | Construction of chamber for 100mm sluice plates | item2 | 213 | Nos | |||||||||||||||||||||||||||||||||||||||
| 36.09 | Double check nut with studs complete | 8.00 | Each | Excess(+) | 1 | Full Conversion | INR | 0.00 | 0.00 | INR Zero Only | 1.02 | Construction of chamber for 100mm sluice plates | item2 | 213 | Nos | |||||||||||||||||||||||||||||||||||||||
| 36.10 | Impeller Key | 2.00 | Each | Excess(+) | 1 | Full Conversion | INR | 0.00 | 0.00 | INR Zero Only | 1.01 | Supplying, Conveying and fixing spls. Including eart | item1 | 123.223 | Nos | |||||||||||||||||||||||||||||||||||||||
| 36.11 | Housing bush | 2.00 | Each | Excess(+) | 1 | Full Conversion | INR | 0.00 | 0.00 | INR Zero Only | 1.01 | Supplying, Conveying and fixing spls. Including eart | item1 | 123.223 | Nos | |||||||||||||||||||||||||||||||||||||||
| 36.12 | Pump shaft | 2.00 | Each | Excess(+) | 1 | Full Conversion | INR | 0.00 | 0.00 | INR Zero Only | 1.02 | Construction of chamber for 100mm sluice plates | item2 | 213 | Nos | |||||||||||||||||||||||||||||||||||||||
| 36.13 | MS coupling cover complete with nut bolt | 4.00 | Each | Excess(+) | 1 | Full Conversion | INR | 0.00 | 0.00 | INR Zero Only | 1.02 | Construction of chamber for 100mm sluice plates | item2 | 213 | Nos | |||||||||||||||||||||||||||||||||||||||
| 37.00 | Taking down centrifugal pumping set from base frame including disconnection of inlet suction and discharge pipe line, pump coupling for Centrigugal Pump Set of capacity 100 HP/125 HP and opening the pumping set for replace the mechanical seal of suitable size and after replacement of mechanical seal the pumping set reinstall on base frame with proper alignment with motor and testing on full discharge complete all as specified and directed. Note:- (i) Mechanical seal and seal plate and connected items shall not be included in the quoted rates of this item. (ii)Contractor shall ensure water pipe lines sealed by blocking with dead flange for the repair period if required | 2.00 | Each Job | Excess(+) | 1 | Full Conversion | INR | 0.00 | 0.00 | INR Zero Only | 1.02 | Construction of chamber for 100mm sluice plates | item2 | 213 | Nos | |||||||||||||||||||||||||||||||||||||||
| 38.00 | M&L for Mechanical seal with seal plate suitable for centrifugal pump set of 100/125HP capacity | 2.00 | Each | Excess(+) | 1 | Full Conversion | INR | 0.00 | 0.00 | INR Zero Only | 1.02 | Construction of chamber for 100mm sluice plates | item2 | 213 | Nos | |||||||||||||||||||||||||||||||||||||||
| 39.00 | M&L for site clearance by means removing of debris, cutting of grass, bushes, plant growth and disposed off up to a distance not more than 50mtr from the starting point as directed at site at various water supply installations complete all as specified and directed. | 5000.00 | Sqm | Excess(+) | 1 | Full Conversion | INR | 0.00 | 0.00 | INR Zero Only | 1.02 | Construction of chamber for 100mm sluice plates | item2 | 213 | Nos | |||||||||||||||||||||||||||||||||||||||
| 40.00 | Disconnecting the existing non functional submersible pump set from electric supply from panel, dismantling existing CI bend from non return valve, removing and lifting out submersible pump set of any description and capacity & in any position, alongwith existing column pipe 100mm dia and existing submersible cable of any size from the bore well ( up to 450 feet depth of pump set from GL) and staking the pump and column pipes near by the bore well for inspection complete all as specified and directed by Engineer-in-Charge. NOTE : (i) Contractor shall take proper precautions while lifting out and removing pump set from bore well so as to avoid any damage to column pipe and submersible cable. All necessary T&P and equipments required for lifting out pump set etc shall be arranged by the contractor at his own cost. (ii) Number of column pipe may vary from 30 to 40. The existing pipes & flanged joints shall be checked for its serviceability & unserviceable joints alongwith flanges shall be removed from the column pipe by cutting the pipes & making new thread in pipes for fixing of new flange joint, the cost of same shall be deemed to be included in the quoted rate for above item. However cleaning of pipes shall be measured & paid separately. | 5.00 | Each Job | Excess(+) | 1 | Full Conversion | INR | 0.00 | 0.00 | INR Zero Only | 1.02 | Construction of chamber for 100mm sluice plates | item2 | 213 | Nos | |||||||||||||||||||||||||||||||||||||||
| 41.00 | Dismantling and strip opening of submersible pump & motor of any description and in any position for servicing /overhauling mechanically and electrically, cleaning, oiling/greasing, fixing of serviceable parts in position, removing & replacement of defective / unserviceable parts with new parts, welding , etc of broken steel sections of pump, full stator slot repair including rotor sleeve grinding and polishing and balancing (if required), reassembling the Pump & motor, ensuring proper alignment of pump and motor, connecting to existing system and testing at site on full load to the entire satisfaction of the Engineer-in-Charge for 40 to 75 HP capacity, 3 phase, 415 volts, 50 HZ, AC supply pumps & motors. Note: - (i) The replacement of defective / nonfunctional parts shall be measured & paid for separately as “Supply only” under appropriate item of Sch ‘A’ and fixing rate for new items are deemed to include under these items. (ii) Burnt out windings of motor shall be replaced, measured and paid for separately under appropriate item of Sch ‘A’ for rewinding. (iii) Painting of complete submersible pump motor set will be carried out by contractor after complete repair of the same and the cost of the painting work will be included in quoted rate of this item. | 5.00 | Each Job | Excess(+) | 1 | Full Conversion | INR | 0.00 | 0.00 | INR Zero Only | 1.02 | Construction of chamber for 100mm sluice plates | item2 | 213 | Nos | |||||||||||||||||||||||||||||||||||||||
| 41.01 | (iii) The rates for above items are deemed to include transportation to & fro of pumps/ motors to workshop for necessary repairs. (iv) The rate quoted for the item shall include re-metaling of Pump shaft, polishing and grinding and making standard size to match with Bush/Neck-ring/ sleeve etc (v) Lifting of pump and motor from bore well and lowering of pump and motor after repairs shall be measured and paid separately under appropriate item of Schedule `A' (vi) The quoted rate shall be deemed to include replacement of small/ minor parts i.e. washers, keys for coupling, cable packing ring etc. | 1.02 | Construction of chamber for 100mm sluice plates | item2 | 213 | Nos | ||||||||||||||||||||||||||||||||||||||||||||||||
| 42.00 | Supply only the following items / spare parts suitable for submersible pump set of 40 to 52 HP capacity dismantled under item No.41 above all as specified and directed by the Engineer-in-Charge. | 1.02 | Construction of chamber for 100mm sluice plates | item2 | 213 | Nos | ||||||||||||||||||||||||||||||||||||||||||||||||
| 42.01 | GM bush bearing. | 4.00 | Each | Excess(+) | 1 | Full Conversion | INR | 0.00 | 0.00 | INR Zero Only | 1.02 | Construction of chamber for 100mm sluice plates | item2 | 213 | Nos | |||||||||||||||||||||||||||||||||||||||
| 42.02 | Neoprene rubber bush for stage bowl. | 4.00 | Each | Excess(+) | 1 | Full Conversion | INR | 0.00 | 0.00 | INR Zero Only | 1.02 | Construction of chamber for 100mm sluice plates | item2 | 213 | Nos | |||||||||||||||||||||||||||||||||||||||
| 42.03 | Stain less steel sleeve. | 4.00 | Each | Excess(+) | 1 | Full Conversion | INR | 0.00 | 0.00 | INR Zero Only | 1.02 | Construction of chamber for 100mm sluice plates | item2 | 213 | Nos | |||||||||||||||||||||||||||||||||||||||
| 42.04 | S/S stud with nut for stage bowl | 16.00 | Each | Excess(+) | 1 | Full Conversion | INR | 0.00 | 0.00 | INR Zero Only | 1.02 | Construction of chamber for 100mm sluice plates | item2 | 213 | Nos | |||||||||||||||||||||||||||||||||||||||
| 42.05 | Impeller Key | 4.00 | Each | Excess(+) | 1 | Full Conversion | INR | 0.00 | 0.00 | INR Zero Only | 1.02 | Construction of chamber for 100mm sluice plates | item2 | 213 | Nos | |||||||||||||||||||||||||||||||||||||||
| 42.06 | GM impeller | 8.00 | Each | Excess(+) | 1 | Full Conversion | INR | 0.00 | 0.00 | INR Zero Only | 1.02 | Construction of chamber for 100mm sluice plates | item2 | 213 | Nos | |||||||||||||||||||||||||||||||||||||||
| 42.07 | Motor pump coupling made out of stain less steel with key. | 2.00 | Each | Excess(+) | 1 | Full Conversion | INR | 0.00 | 0.00 | INR Zero Only | 1.02 | Construction of chamber for 100mm sluice plates | item2 | 213 | Nos | |||||||||||||||||||||||||||||||||||||||
| 42.08 | Stage bowl | 10.00 | Each | Excess(+) | 1 | Full Conversion | INR | 0.00 | 0.00 | INR Zero Only | 1.02 | Construction of chamber for 100mm sluice plates | item2 | 213 | Nos | |||||||||||||||||||||||||||||||||||||||
| 42.09 | Anti magnetic stainless steel pump shaft with key | 1.00 | Each | Excess(+) | 1 | Full Conversion | INR | 0.00 | 0.00 | INR Zero Only | 1.02 | Construction of chamber for 100mm sluice plates | item2 | 213 | Nos | |||||||||||||||||||||||||||||||||||||||
| 42.10 | Strainer stainless steel | 2.00 | Each | Excess(+) | 1 | Full Conversion | INR | 0.00 | 0.00 | INR Zero Only | 1.02 | Construction of chamber for 100mm sluice plates | item2 | 213 | Nos | |||||||||||||||||||||||||||||||||||||||
| 43.00 | Supply only the following items / spare parts suitable for submersible pump set of 60 to 75 HP capacity dismantled under item No.41 above all as specified and directed by the Engineer-in-Charge. | 1.02 | Construction of chamber for 100mm sluice plates | item2 | 213 | Nos | ||||||||||||||||||||||||||||||||||||||||||||||||
| 43.01 | GM bush bearing. | 4.00 | Each | Excess(+) | 1 | Full Conversion | INR | 0.00 | 0.00 | INR Zero Only | 1.02 | Construction of chamber for 100mm sluice plates | item2 | 213 | Nos | |||||||||||||||||||||||||||||||||||||||
| 43.02 | Neoprene rubber bush for stage bowl. | 8.00 | Each | Excess(+) | 1 | Full Conversion | INR | 0.00 | 0.00 | INR Zero Only | 1.02 | Construction of chamber for 100mm sluice plates | item2 | 213 | Nos | |||||||||||||||||||||||||||||||||||||||
| 43.03 | Stain less steel sleeve. | 8.00 | Each | Excess(+) | 1 | Full Conversion | INR | 0.00 | 0.00 | INR Zero Only | 1.02 | Construction of chamber for 100mm sluice plates | item2 | 213 | Nos | |||||||||||||||||||||||||||||||||||||||
| 43.04 | S/S stud with nut for stage bowl | 32.00 | Each | Excess(+) | 1 | Full Conversion | INR | 0.00 | 0.00 | INR Zero Only | 1.02 | Construction of chamber for 100mm sluice plates | item2 | 213 | Nos | |||||||||||||||||||||||||||||||||||||||
| 43.05 | Impeller Key | 3.00 | Each | Excess(+) | 1 | Full Conversion | INR | 0.00 | 0.00 | INR Zero Only | 1.02 | Construction of chamber for 100mm sluice plates | item2 | 213 | Nos | |||||||||||||||||||||||||||||||||||||||
| 43.06 | GM impeller | 4.00 | Each | Excess(+) | 1 | Full Conversion | INR | 0.00 | 0.00 | INR Zero Only | 1.02 | Construction of chamber for 100mm sluice plates | item2 | 213 | Nos | |||||||||||||||||||||||||||||||||||||||
| 43.07 | Motor pump coupling made out of stain less steel with key. | 2.00 | Each | Excess(+) | 1 | Full Conversion | INR | 0.00 | 0.00 | INR Zero Only | 1.02 | Construction of chamber for 100mm sluice plates | item2 | 213 | Nos | |||||||||||||||||||||||||||||||||||||||
| 43.08 | Stage bowl | 4.00 | Each | Excess(+) | 1 | Full Conversion | INR | 0.00 | 0.00 | INR Zero Only | 1.02 | Construction of chamber for 100mm sluice plates | item2 | 213 | Nos | |||||||||||||||||||||||||||||||||||||||
| 43.09 | Amti magnetic stainless steel pump shaft with key. | 1.00 | Each | Excess(+) | 1 | Full Conversion | INR | 0.00 | 0.00 | INR Zero Only | 1.02 | Construction of chamber for 100mm sluice plates | item2 | 213 | Nos | |||||||||||||||||||||||||||||||||||||||
| 43.10 | Strainer stainless steel | 3.00 | Each | Excess(+) | 1 | Full Conversion | INR | 0.00 | 0.00 | INR Zero Only | 1.02 | Construction of chamber for 100mm sluice plates | item2 | 213 | Nos | |||||||||||||||||||||||||||||||||||||||
| 44.00 | Supply only the following items / spare parts suitable for Motor of submersible of 40 to 52 HP capacity dismantled under item No.41 above all as specified and directed by the Engineer-in-Charge. | 1.02 | Construction of chamber for 100mm sluice plates | item2 | 213 | Nos | ||||||||||||||||||||||||||||||||||||||||||||||||
| 44.01 | S/S upper sleeve. | 4.00 | Each | Excess(+) | 1 | Full Conversion | INR | 0.00 | 0.00 | INR Zero Only | 1.02 | Construction of chamber for 100mm sluice plates | item2 | 213 | Nos | |||||||||||||||||||||||||||||||||||||||
| 44.02 | S/S lower bush. | 4.00 | Each | Excess(+) | 1 | Full Conversion | INR | 0.00 | 0.00 | INR Zero Only | 1.02 | Construction of chamber for 100mm sluice plates | item2 | 213 | Nos | |||||||||||||||||||||||||||||||||||||||
| 44.03 | Upper bush rubber. | 4.00 | Each | Excess(+) | 1 | Full Conversion | INR | 0.00 | 0.00 | INR Zero Only | 1.02 | Construction of chamber for 100mm sluice plates | item2 | 213 | Nos | |||||||||||||||||||||||||||||||||||||||
| 44.04 | Lower bush rubber. | 4.00 | Each | Excess(+) | 1 | Full Conversion | INR | 0.00 | 0.00 | INR Zero Only | 1.02 | Construction of chamber for 100mm sluice plates | item2 | 213 | Nos | |||||||||||||||||||||||||||||||||||||||
| 44.05 | GM thrust bearing. | 4.00 | Each | Excess(+) | 1 | Full Conversion | INR | 0.00 | 0.00 | INR Zero Only | 1.02 | Construction of chamber for 100mm sluice plates | item2 | 213 | Nos | |||||||||||||||||||||||||||||||||||||||
| 44.06 | GM thrust plate complete kit | 4.00 | Each | Excess(+) | 1 | Full Conversion | INR | 0.00 | 0.00 | INR Zero Only | 1.02 | Construction of chamber for 100mm sluice plates | item2 | 213 | Nos | |||||||||||||||||||||||||||||||||||||||
| 44.07 | Thrust plate accel | 4.00 | Each | Excess(+) | 1 | Full Conversion | INR | 0.00 | 0.00 | INR Zero Only | 1.02 | Construction of chamber for 100mm sluice plates | item2 | 213 | Nos | |||||||||||||||||||||||||||||||||||||||
| 45.00 | Supply only the following items / spare parts suitable for Motor of submersible of 60 to 75 HP capacity dismantled under item No.41 above all as specified and directed by the Engineer-in-Charge. | 1.02 | Construction of chamber for 100mm sluice plates | item2 | 213 | Nos | ||||||||||||||||||||||||||||||||||||||||||||||||
| 45.01 | S/S upper sleeve. | 2.00 | Each | Excess(+) | 1 | Full Conversion | INR | 0.00 | 0.00 | INR Zero Only | 1.02 | Construction of chamber for 100mm sluice plates | item2 | 213 | Nos | |||||||||||||||||||||||||||||||||||||||
| 45.02 | S/S lower bush. | 2.00 | Each | Excess(+) | 1 | Full Conversion | INR | 0.00 | 0.00 | INR Zero Only | 1.02 | Construction of chamber for 100mm sluice plates | item2 | 213 | Nos | |||||||||||||||||||||||||||||||||||||||
| 45.03 | Upper bush rubber. | 2.00 | Each | Excess(+) | 1 | Full Conversion | INR | 0.00 | 0.00 | INR Zero Only | 1.02 | Construction of chamber for 100mm sluice plates | item2 | 213 | Nos | |||||||||||||||||||||||||||||||||||||||
| 45.04 | Lower bush rubber. | 2.00 | Each | Excess(+) | 1 | Full Conversion | INR | 0.00 | 0.00 | INR Zero Only | 1.02 | Construction of chamber for 100mm sluice plates | item2 | 213 | Nos | |||||||||||||||||||||||||||||||||||||||
| 45.05 | GM thrust bearing. | 2.00 | Each | Excess(+) | 1 | Full Conversion | INR | 0.00 | 0.00 | INR Zero Only | 1.02 | Construction of chamber for 100mm sluice plates | item2 | 213 | Nos | |||||||||||||||||||||||||||||||||||||||
| 45.06 | GM thrust plate complete kit | 2.00 | Each | Excess(+) | 1 | Full Conversion | INR | 0.00 | 0.00 | INR Zero Only | 1.02 | Construction of chamber for 100mm sluice plates | item2 | 213 | Nos | |||||||||||||||||||||||||||||||||||||||
| 45.07 | Thrust plate accel | 2.00 | Each | Excess(+) | 1 | Full Conversion | INR | 0.00 | 0.00 | INR Zero Only | 1.02 | Construction of chamber for 100mm sluice plates | item2 | 213 | Nos | |||||||||||||||||||||||||||||||||||||||
| 46.00 | Taking out & removing old burnt out windings of the submersible electric motors of following capacity and rewinding of submersible electric motors with existing size PVC insulated, copper conductor wire as approved by the Engineer-in-Charge including cleaning the slots with carbon- tetra-chloride solution before rewinding, transportation to site complete all as specified and directed by Engineer-in-Charge. | 1.02 | Construction of chamber for 100mm sluice plates | item2 | 213 | Nos | ||||||||||||||||||||||||||||||||||||||||||||||||
| 46.01 | 40 HP to 60 HP, Three phase, 415 Volts, 50 Hz, AC supply | 2.00 | Each job | Excess(+) | 1 | Full Conversion | INR | 0.00 | 0.00 | INR Zero Only | 1.02 | Construction of chamber for 100mm sluice plates | item2 | 213 | Nos | |||||||||||||||||||||||||||||||||||||||
| 46.02 | 61 HP to 75 HP, Three phase, 415 Volts, 50 Hz, AC supply | 2.00 | Each job | Excess(+) | 1 | Full Conversion | INR | 0.00 | 0.00 | INR Zero Only | 1.02 | Construction of chamber for 100mm sluice plates | item2 | 213 | Nos | |||||||||||||||||||||||||||||||||||||||
| 47.00 | M&L for lowering down of the submersible pump set of any description and any capacity & in any position, in bore well alongwith column pipe 100mm dia and submersible cable of any size (approximately 450 feet depth of pump set from GL) making necessary electric connections & testing the pump set after lowering complete all as specified and directed by Engineer-in-Charge | 5.00 | Each Job | Excess(+) | 1 | Full Conversion | INR | 0.00 | 0.00 | INR Zero Only | 1.02 | Construction of chamber for 100mm sluice plates | item2 | 213 | Nos | |||||||||||||||||||||||||||||||||||||||
| 48.00 | Supply and fixing straight through joint complete with jointing materials suitable for three core stranded copper conductor cable PVC insulated and sheathed flat submersible cable 1100 Volt grade all as specified and directed by Engineer-in-Charge. | 5.00 | Each | Excess(+) | 1 | Full Conversion | INR | 0.00 | 0.00 | INR Zero Only | 1.02 | Construction of chamber for 100mm sluice plates | item2 | 213 | Nos | |||||||||||||||||||||||||||||||||||||||
| 49.00 | M&L for painting of centrifugal pumping set of different capacity and its connected items (sluice valve, NRVs, coupling gaurd, base frame etc) including writing letters on pump motors etc at various installations as per colour code with two coats of synthetic enamelled paint over a coat of primer complete all as specified and directed for following capacity pump set:- | 1.02 | Construction of chamber for 100mm sluice plates | item2 | 213 | Nos | ||||||||||||||||||||||||||||||||||||||||||||||||
| 49.01 | Centrifugal pump set of capacity 12.5 HP to 25 HP | 8.00 | Each Job | Excess(+) | 1 | Full Conversion | INR | 0.00 | 0.00 | INR Zero Only | 1.02 | Construction of chamber for 100mm sluice plates | item2 | 213 | Nos | |||||||||||||||||||||||||||||||||||||||
| 49.02 | Centrifugal pump set of capacity 50 HP to 75 HP | 7.00 | Each Job | Excess(+) | 1 | Full Conversion | INR | 0.00 | 0.00 | INR Zero Only | 1.02 | Construction of chamber for 100mm sluice plates | item2 | 213 | Nos | |||||||||||||||||||||||||||||||||||||||
| 49.03 | Centrifugal pump set of capacity 100 HP to 125 HP | 2.00 | Each Job | Excess(+) | 1 | Full Conversion | INR | 0.00 | 0.00 | INR Zero Only | 1.02 | Construction of chamber for 100mm sluice plates | item2 | 213 | Nos | |||||||||||||||||||||||||||||||||||||||
| 50.00 | Taking down carefully Unserviceable pressure boosting pump of 0.5 HP to 1 HP capacity of any Make from base frame for repair purpose and repair/replacement of defective spares. After repair work refixing the same on base frame including provision of necessery T & P like ladder, tools ets as required for taking down and refixing of pressure boosting pump complete all as specefied. Note : Replacement of defective spare parts (to make functional ) will be measured and paid separately as supply only. However, cost of replacement screws, nuts, bolts, and cleaning of pump shall be deemed to be included in quoted rate. | 2.00 | Each Job | Excess(+) | 1 | Full Conversion | INR | 0.00 | 0.00 | INR Zero Only | 1.02 | Construction of chamber for 100mm sluice plates | item2 | 213 | Nos | |||||||||||||||||||||||||||||||||||||||
| 51.00 | S&F in replacement stainless steel pressure booster pump tank of storage capacity 250 Ltr of existing specifications & make complete all as specefied and as directed by Engr-in-charge. | 2.00 | Each | Excess(+) | 1 | Full Conversion | INR | 0.00 | 0.00 | INR Zero Only | 1.02 | Construction of chamber for 100mm sluice plates | item2 | 213 | Nos | |||||||||||||||||||||||||||||||||||||||
| 52.00 | S&F in replacement pressure booster pump pressure switch of existing specifications & make complete all as specefied and as directed by Engr-in-charge. | 2.00 | Each | Excess(+) | 1 | Full Conversion | INR | 0.00 | 0.00 | INR Zero Only | 1.02 | Construction of chamber for 100mm sluice plates | item2 | 213 | Nos | |||||||||||||||||||||||||||||||||||||||
| 53.00 | S&F in replacement pressure booster pump impeller of existing specifications & make complete all as specefied and as directed by Engr-in-charge. | 2.00 | Each | Excess(+) | 1 | Full Conversion | INR | 0.00 | 0.00 | INR Zero Only | 1.02 | Construction of chamber for 100mm sluice plates | item2 | 213 | Nos | |||||||||||||||||||||||||||||||||||||||
| 54.00 | S&F in replacement mechanical seal for pressure booster pump impeller of existing specifications & make complete all as specefied and as directed by Engr-in-charge. | 2.00 | Each | Excess(+) | 1 | Full Conversion | INR | 0.00 | 0.00 | INR Zero Only | 1.02 | Construction of chamber for 100mm sluice plates | item2 | 213 | Nos | |||||||||||||||||||||||||||||||||||||||
| 55.00 | Supply only LT insulation tester 1000 volts DC with rechargeable battery all as specified and directed by Eng-in charge. | 1.00 | Each | Excess(+) | 1 | Full Conversion | INR | 0.00 | 0.00 | INR Zero Only | 1.02 | Construction of chamber for 100mm sluice plates | item2 | 213 | Nos | |||||||||||||||||||||||||||||||||||||||
| 56.00 | Supply only Earth tester 1000 volts DC with rechargeable battery all as specified and directed by Eng-in charge. | 1.00 | Each | Excess(+) | 1 | Full Conversion | INR | 0.00 | 0.00 | INR Zero Only | 1.02 | Construction of chamber for 100mm sluice plates | item2 | 213 | Nos | |||||||||||||||||||||||||||||||||||||||
| 57.00 | Supply only chlorine test kit all as specified and directed by Eng-in-charge. | 10.00 | Each | Excess(+) | 1 | Full Conversion | INR | 0.00 | 0.00 | INR Zero Only | 1.02 | Construction of chamber for 100mm sluice plates | item2 | 213 | Nos | |||||||||||||||||||||||||||||||||||||||
| 58.00 | Supply only Turbidity Test Meter all as specified and directed by Eng-in-charge. | 1.00 | Each | Excess(+) | 1 | Full Conversion | INR | 0.00 | 0.00 | INR Zero Only | 1.02 | Construction of chamber for 100mm sluice plates | item2 | 213 | Nos | |||||||||||||||||||||||||||||||||||||||
| 59.00 | Disconnecting the existing non functional open well submersible pump set of capacity upto 40 HP from starter panel, removing and lifting out open well submersible pump set of any description and existing capacity & in any position, alongwith existing fittings and cable from the open well and staking the pump near by the open well for inspection and transporting to workshop for servicing /overhauling mechanically and electrically, cleaning, oiling/greasing, fixing of serviceable parts in position, removing & replacement of defective / unserviceable parts with new parts, welding , etc of broken steel sections of pump, full stator slot repair including rotor sleeve grinding and polishing and balancing (if required), reassembling the open well submersible Pump Set, connecting to existing system and testing at site on full load to the entire satisfaction of the Engineer-in-Charge Note: - (i) Contractor shall take proper precautions while lifting out and removing pump set from open well so as to avoid any damage. All necessary T&P and equipments required for lifting out pump set etc shall be arranged by the contractor at his own cost. (i) Cost of supply and fix of defective / nonfunctional parts will be measured and paid for separately under appropriate item of Sch ‘A’ (ii) Burnt out windings of motor shall be replaced, measured and paid for separately under appropriate item of Sch ‘A’ for rewinding. (iii) Painting of complete open well submersible pump motor set will be carried out by contractor after complete repair of the same and the cost of the painting work will be included in quoted rate of this item. | 2.00 | Each Job | Excess(+) | 1 | Full Conversion | INR | 0.00 | 0.00 | INR Zero Only | 1.02 | Construction of chamber for 100mm sluice plates | item2 | 213 | Nos | |||||||||||||||||||||||||||||||||||||||
| 60.00 | Taking out & removing old burnt out windings of the open well submersible electric motors of any capacity and rewinding of open well submersible electric motors with existing size PVC insulated, copper conductor wire as approved by the Engineer-in-Charge including cleaning the slots with carbon- tetra-chloride solution before rewinding ,transportation to site complete all as specified and directed by Engineer-in-Charge. | 30.00 | Kg | Excess(+) | 1 | Full Conversion | INR | 0.00 | 0.00 | INR Zero Only | 1.02 | Construction of chamber for 100mm sluice plates | item2 | 213 | Nos | |||||||||||||||||||||||||||||||||||||||
| 61.00 | Supply only the following items / spare parts suitable for open well submersible pump set of 40 HP capacity under item No.59 above all as specified and directed by the Engineer-in-Charge. | 1.02 | Construction of chamber for 100mm sluice plates | item2 | 213 | Nos | ||||||||||||||||||||||||||||||||||||||||||||||||
| 61.01 | GM bush bearing. | 2.00 | Each | Excess(+) | 1 | Full Conversion | INR | 0.00 | 0.00 | INR Zero Only | 1.02 | Construction of chamber for 100mm sluice plates | item2 | 213 | Nos | |||||||||||||||||||||||||||||||||||||||
| 61.02 | Stain less steel sleeve. | 2.00 | Each | Excess(+) | 1 | Full Conversion | INR | 0.00 | 0.00 | INR Zero Only | 1.02 | Construction of chamber for 100mm sluice plates | item2 | 213 | Nos | |||||||||||||||||||||||||||||||||||||||
| 61.03 | S/S stud with nut | 8.00 | Each | Excess(+) | 1 | Full Conversion | INR | 0.00 | 0.00 | INR Zero Only | 1.02 | Construction of chamber for 100mm sluice plates | item2 | 213 | Nos | |||||||||||||||||||||||||||||||||||||||
| 61.04 | Impeller Key | 2.00 | Each | Excess(+) | 1 | Full Conversion | INR | 0.00 | 0.00 | INR Zero Only | 1.02 | Construction of chamber for 100mm sluice plates | item2 | 213 | Nos | |||||||||||||||||||||||||||||||||||||||
| 61.05 | GM impeller | 2.00 | Each | Excess(+) | 1 | Full Conversion | INR | 0.00 | 0.00 | INR Zero Only | 1.02 | Construction of chamber for 100mm sluice plates | item2 | 213 | Nos | |||||||||||||||||||||||||||||||||||||||
| 61.06 | Motor pump coupling made out of stain less steel with key. | 2.00 | Each | Excess(+) | 1 | Full Conversion | INR | 0.00 | 0.00 | INR Zero Only | 1.02 | Construction of chamber for 100mm sluice plates | item2 | 213 | Nos | |||||||||||||||||||||||||||||||||||||||
| 62.00 | Supply only the following items / spare parts suitable for Motor of open well submersible of 40 HP capacity dismantled under item No.60 above all as specified and directed by the Engineer-in-Charge. | 1.02 | Construction of chamber for 100mm sluice plates | item2 | 213 | Nos | ||||||||||||||||||||||||||||||||||||||||||||||||
| 62.01 | S/S upper sleeve. | 2.00 | Each | Excess(+) | 1 | Full Conversion | INR | 0.00 | 0.00 | INR Zero Only | 1.02 | Construction of chamber for 100mm sluice plates | item2 | 213 | Nos | |||||||||||||||||||||||||||||||||||||||
| 62.02 | S/S lower bush. | 2.00 | Each | Excess(+) | 1 | Full Conversion | INR | 0.00 | 0.00 | INR Zero Only | 1.02 | Construction of chamber for 100mm sluice plates | item2 | 213 | Nos | |||||||||||||||||||||||||||||||||||||||
| 62.03 | Upper bush rubber. | 2.00 | Each | Excess(+) | 1 | Full Conversion | INR | 0.00 | 0.00 | INR Zero Only | 1.02 | Construction of chamber for 100mm sluice plates | item2 | 213 | Nos | |||||||||||||||||||||||||||||||||||||||
| 62.04 | Lower bush rubber. | 2.00 | Each | Excess(+) | 1 | Full Conversion | INR | 0.00 | 0.00 | INR Zero Only | 1.02 | Construction of chamber for 100mm sluice plates | item2 | 213 | Nos | |||||||||||||||||||||||||||||||||||||||
| 62.05 | GM thrust bearing. | 2.00 | Each | Excess(+) | 1 | Full Conversion | INR | 0.00 | 0.00 | INR Zero Only | 1.02 | Construction of chamber for 100mm sluice plates | item2 | 213 | Nos | |||||||||||||||||||||||||||||||||||||||
| 62.06 | GM thrust plate complete kit | 2.00 | Each | Excess(+) | 1 | Full Conversion | INR | 0.00 | 0.00 | INR Zero Only | 1.02 | Construction of chamber for 100mm sluice plates | item2 | 213 | Nos | |||||||||||||||||||||||||||||||||||||||
| 62.07 | Thrust plate accel | 2.00 | Each | Excess(+) | 1 | Full Conversion | INR | 0.00 | 0.00 | INR Zero Only | 1.02 | Construction of chamber for 100mm sluice plates | item2 | 213 | Nos | |||||||||||||||||||||||||||||||||||||||
| 63.00 | Disconnecting the existing non functional open well submersible pump set of capacity upto 0.5 HP to 3 HP (single phase) from starter/Starter panel, removing and lifting out open well submersible pump set of any description and existing capacity & in any position, alongwith existing fittings and cable from the open well and transporting to workshop for servicing /overhauling mechanically and electrically, cleaning, oiling/greasing, fixing of serviceable parts in position, removing & replacement of defective / unserviceable parts with new parts, welding , etc reassembling the open well submersible Pump Set, connecting to existing system and testing at site on full load to the entire satisfaction of the Engineer-in-Charge Note: - (i) Contractor shall take proper precautions while taking out and removing pump set from open well so as to avoid any damage. All necessary T&P and equipments required for lifting out pump set etc shall be arranged by the contractor at his own cost. (i) Cost of supply and fix of defective / nonfunctional parts will be included in quoted rate of this item and shall not paid separately. (ii) Burnt out windings of motor shall be replaced, measured and paid for separately under appropriate item of Sch ‘A’ for rewinding. (iii) Painting of complete open well submersible pump motor set will be carried out by contractor after complete repair of the same and the cost of the painting work will be included in quoted rate of this item. | 4.00 | Each | Excess(+) | 1 | Full Conversion | INR | 0.00 | 0.00 | INR Zero Only | 1.02 | Construction of chamber for 100mm sluice plates | item2 | 213 | Nos | |||||||||||||||||||||||||||||||||||||||
| 64.00 | Attending complaints for pumping set/submersible pump set / LT Panel/starter panel/ DG Set / AMF Panel including minor repair, checking of all nut bolts and tightening if required, all electrical and mechanical connections with motor pump set and other equipments in water supply installation all as specified and directed. Rate of nut bolt, washer shall be included in quoted rate of this item. Note :- Complaints attended in one pump house in one day shall deemed to be in one complaint. | 45.00 | Each Job | Excess(+) | 1 | Full Conversion | INR | 0.00 | 0.00 | INR Zero Only | 1.02 | Construction of chamber for 100mm sluice plates | item2 | 213 | Nos | |||||||||||||||||||||||||||||||||||||||
| Total in Figures | 0.00 | 0.00 | INR Zero Only | |||||||||||||||||||||||||||||||||||||||||||||||||||
| Quoted Rate in Figures | Select | 0.0000 | 0.0000 | Zero Only | ||||||||||||||||||||||||||||||||||||||||||||||||||
| Quoted Rate in Words | INR Zero Only |
Andaman & Nicobar Tenders |Andhra Pradesh Tenders |Arunachal Pradesh Tenders |Assam Tenders |Bihar Tenders |Chandigarh Tenders |Chhattisgarh Tenders |Dadra & Nagar Haveli Tenders |Daman & Diu Tenders |Delhi Tenders |Goa Tenders |Gujarat Tenders |Haryana Tenders |Himachal Pradesh Tenders |Jammu & Kashmir Tenders |Jharkhand Tenders |Karnataka Tenders |Kerala Tenders |Ladakh Tenders |Lakshadweep Tenders |Madhya Pradesh Tenders |Maharashtra Tenders |Manipur Tenders |Meghalaya Tenders |Mizoram Tenders |Nagaland Tenders |Odisha Tenders |Pondicherry Tenders |Punjab Tenders |Rajasthan Tenders |Sikkim Tenders |Tamil Nadu Tenders |Telangana Tenders |Tripura Tenders |Uttarakhand Tenders |Uttar Pradesh Tenders |West Bengal Tenders |