Items - COMPREHENSIVE REPAIRS TO OTM ACCN OF ZONE I AT AGE B R I (SOUTH) UNDER GE (SOUTH) AMBALA CANTT
| Item Rate BoQ | ||||||||||||||||||||||||||||||||||||||||||||||||||||||
| BoQ_Ver3.0 | Item Rate | Normal | INR Only | INR | ||||||||||||||||||||||||||||||||||||||||||||||||||
| Select, Excess (+), Less (-) | Less (-) | |||||||||||||||||||||||||||||||||||||||||||||||||||||
| Tender Inviting Authority: GARRISON ENGINEER (SOUTH) AMBALA CANTT | ||||||||||||||||||||||||||||||||||||||||||||||||||||||
| NAME OF WORK : COMPREHENSIVE REPAIRS TO OTM ACCN OF ZONE I AT AGE B&R-I (SOUTH) UNDER GE (SOUTH) AMBALA CANTT (REVISED BoQ). | ||||||||||||||||||||||||||||||||||||||||||||||||||||||
| CONTRACT NO : GE(SOUTH)/AMB-38/2025-2026 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Bidder Name : | ||||||||||||||||||||||||||||||||||||||||||||||||||||||
| PRICE SCHEDULE (This BOQ must not be modified/replaced by the bidder and the same should be uploaded after filling the relevent columns, else the bidder is liable to be rejected for this tender. Bidders are allowed to enter the Bidder Name and Values only ) | ||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Sl. No. | Item Description | Item Code / Make | Quantity | Units | Estimated Rate | Addition / Deduction | Addition / Deduction Values | Currency Convertion against each Item | Quoted Currency in INR / Other Currency | BASIC RATE In Figures To be entered by the Bidder Rs. P | Excise Duty | VAT | Freight Charges ( Unloading & Stacking) | Any Other Taxes/Duties/Levies | Other Taxes 2 | IIIrd Party i.e DGS&D / RITES etc Inspection Charges @0.34%+Service Tax | Less for Cenvat Credit,if any respect of Supplies Under full Excise Duty Category | TOTAL AMOUNT Without Taxes | TOTAL AMOUNT With Taxes | TOTAL AMOUNT In Words | ||||||||||||||||||||||||||||||||||
| 1 | 2 | 3 | 3 | 4 | 6 | 7 | 8 | 9 | 10 | 11 | 12 | 5 | 14 | 15 | 16 | 17 | 18 | 19 | 20 | 21 | 22 | 23 | 24 | 25 | 26 | 27 | 28 | 29 | 30 | 31 | 32 | 33 | 34 | 35 | 36 | 37 | 38 | 39 | 40 | 41 | 42 | 43 | 44 | 45 | 46 | 47 | 48 | 49 | 50 | 51 | 52 | 53 | 6 | 7 |
| 1.00 | Demolition of brickwork built in cement mortar or cement lime mortar including all quoins, arches, pillars , complete all as specified and directed. | 11.30 | CUBIC METER | Excess(+) | 1 | Full Conversion | INR | 0.00 | 0.0000 | INR Zero Only | ||||||||||||||||||||||||||||||||||||||||||||
| 2.00 | Material and labour for brick work with sub class B bricks, straight or curved on plan exceeding 6m mean radius, built in cement mortar 1:6 complete all as specified and directed. | 6.00 | CUBIC METER | Excess(+) | 1 | Full Conversion | INR | 0.00 | 0.0000 | INR Zero Only | ||||||||||||||||||||||||||||||||||||||||||||
| 3.00 | All as per item No 02.00 here in before but except bricks, complete all as specified and directed. | 3.00 | CUBIC METER | Excess(+) | 1 | Full Conversion | INR | 0.00 | 0.0000 | INR Zero Only | ||||||||||||||||||||||||||||||||||||||||||||
| 4.00 | Material and labour for brick work with Sub Class "B" bricks, straight or curved on plan to any radius in half brick thick walls built in cement mortar 1:4 Complete all as specified and directed. | 20.00 | SQUARE METER | Excess(+) | 1 | Full Conversion | INR | 0.00 | 0.0000 | INR Zero Only | ||||||||||||||||||||||||||||||||||||||||||||
| 5.00 | Taking down cement plaster and raking out joints, hacking for key, scrubbing down with water built in cement mortar complete all as speciifed and directed | 750.00 | SQUARE METER | Excess(+) | 1 | Full Conversion | INR | 0.00 | 0.0000 | INR Zero Only | ||||||||||||||||||||||||||||||||||||||||||||
| 6.00 | Material and labour for rendering 15 mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:6 finished even and smooth without using extra cement complete all as speciifed and directed. | 250.00 | SQUARE METER | Excess(+) | 1 | Full Conversion | INR | 0.00 | 0.0000 | INR Zero Only | ||||||||||||||||||||||||||||||||||||||||||||
| 7.00 | Material and labour for rendering 15 mm thick on other than fair faces of brick work or concrete surfaces in cement mortar 1:4 finished even and smooth without using extra cement complete all as specified and directed | 250.00 | SQUARE METER | Excess(+) | 1 | Full Conversion | INR | 0.00 | 0.0000 | INR Zero Only | ||||||||||||||||||||||||||||||||||||||||||||
| 8.00 | Material and labour for rough cast plaster with and including 15mm thick rendering in cement mortar 1:3 on brick wall or concrete surface as specified in clause 14.22 of SSR Part-I complete all as specified and directed. NOTE : - (i) After applying the under coat of cement and sand mortar 1:3 not less than 10 mm thick and while it is still in plastic state the rough cast mixture consisting of crushed stone or fine gravel aggregate (which is generally of size between 6 to 12 mm depending on the texture required) mixed with coarse sand and cement in the ratio of 1: 1: 1 shall be applied and finished even. (ii) The mix of cement and sand shall be made slightly loose/wetter than normal for rendering to ensure that larger aggregates are thoroughly covered. (iii) Contractor's quoted rate shall include all above provisions and no extra shall be admissible on this account. | 300.00 | SQUARE METER | Excess(+) | 1 | Full Conversion | INR | 0.00 | 0.0000 | INR Zero Only | ||||||||||||||||||||||||||||||||||||||||||||
| 9.00 | Material and labour for 5mm thick plaster on ceiling or sides/ bottom of precast concrete surfaces in cement mortar 1:3 and finished even and smooth (without using extra cement) complete all as specified and directed. | 50.00 | SQUARE METER | Excess(+) | 1 | Full Conversion | INR | 0.00 | 0.0000 | INR Zero Only | ||||||||||||||||||||||||||||||||||||||||||||
| 10.00 | Demolition of cement concrete (unreinforced) of any description not otherwise provided for etc; completed as specified and directed & removal of all demolished material and debris outside the MoD land complete all as specifed and directed. | 21.50 | CUBIC METER | Excess(+) | 1 | Full Conversion | INR | 0.00 | 0.0000 | INR Zero Only | ||||||||||||||||||||||||||||||||||||||||||||
| 11.00 | Material and labour for 50mm thick plain cement concrete 1:3:6 type C-1 (using 20mm graded mechanically crushed stone aggregate) as in plinth protection finished even and smooth without using extra cement with and including 10mm wide, 30mm deep joints at the rate of 3.00 mtr centre to centre and at every turning and filling the joints with 85/25 grade bitumen and sand (1:3 ratio) mixture complete all as speciifed and directed. | 200.00 | SQUARE METER | Excess(+) | 1 | Full Conversion | INR | 0.00 | 0.0000 | INR Zero Only | ||||||||||||||||||||||||||||||||||||||||||||
| 12.00 | Material and labour for 75 mm thick plain cement concrete 1:4:8 type D-2 (using 40 mm graded mechanically crushed stone aggregate) as in sub base of floor/path, etc complete all as specified and directed. | 100.00 | SQUARE METER | Excess(+) | 1 | Full Conversion | INR | 0.00 | 0.0000 | INR Zero Only | ||||||||||||||||||||||||||||||||||||||||||||
| 13.00 | Material and labour for 40 mm thick plain cement concrete 1:2:4 type B-0 (using 12.5 mm graded mechanically crushed stone aggregate) in flooring sub base layer complete all as specified and directed | 100.00 | SQUARE METER | Excess(+) | 1 | Full Conversion | INR | 0.00 | 0.0000 | INR Zero Only | ||||||||||||||||||||||||||||||||||||||||||||
| 14.00 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed | 805.00 | SQUARE METER | Excess(+) | 1 | Full Conversion | INR | 0.00 | 0.0000 | INR Zero Only | ||||||||||||||||||||||||||||||||||||||||||||
| 15.00 | Supply and fixing of heavy duty tiles (coloured), good grip series, size 300 mm x 300 mm x 10 mm thick, pattern as approved by Engineer-in-Charge, set, jointed and pointed in neat cement slurry @ 3.00 kg/square metre, laid over and including 20 mm thick (average thickness) cement mortar (1:4) bed, complete all as speciifed and directed | 250.00 | SQUARE METER | Excess(+) | 1 | Full Conversion | INR | 0.00 | 0.0000 | INR Zero Only | ||||||||||||||||||||||||||||||||||||||||||||
| 16.00 | Material and labour for premium quality, joint free, non skid coloured ceramic tiles, of size 600x600mm, 8 to 9 mm thick as in floors etc, set and jointed in neat cement slurry @ 3.00 Kg/square metre and pointed in white or coloured cement to match the shade of tiles over and including 15mm thick screed bed or bedding layer in cement mortar (1:4) complete all as specified and directed. | 225.00 | SQUARE METER | Excess(+) | 1 | Full Conversion | INR | 0.00 | 0.0000 | INR Zero Only | ||||||||||||||||||||||||||||||||||||||||||||
| 17.00 | Material and labour for premium quality, joint free, non skid coloured ceramic tiles, of size 600x600mm, 8 to 9 mm thick as in vertical surfaces such as dado, skirting etc set and jointed in neat cement slurry @ 3.00 kg/square metre and pointed in white or coloured cement to match the shade of tiles over and including rendering 10mm thick in cement mortar 1:4 finished rough surface to receive tiles complete all as specified and directed. | 15.00 | SQUARE METER | Excess(+) | 1 | Full Conversion | INR | 0.00 | 0.0000 | INR Zero Only | ||||||||||||||||||||||||||||||||||||||||||||
| 18.00 | Material and labour for premium quality coloured glazed ceramic tiles of size 450 mm x 350mm x 7 to 8 mm thick) as in vertical surfaces such as dado, skirting etc set and jointed in neat cement slurry @ 3.00 kg/square metre and pointed in white or coloured cement to match the shade of tiles over and including rendering 10mm thick in cement mortar 1:4 finished rough surface to receive tiles complete all as specified and directed. | 315.00 | SQUARE METER | Excess(+) | 1 | Full Conversion | INR | 0.00 | 0.0000 | INR Zero Only | ||||||||||||||||||||||||||||||||||||||||||||
| 19.00 | Demolition stone slab of any description or thickness, laid, bedded and pointed in any mortar complete all as specified and directed. | 26.00 | PER 10 SQUARE METER | Excess(+) | 1 | Full Conversion | INR | 0.00 | 0.0000 | INR Zero Only | ||||||||||||||||||||||||||||||||||||||||||||
| 20.00 | Material and labour for 18 to 20mm thick granite stone of black shade work (table rubbed, polished and moulding), as in floors, cooking platforms and like bedded with and including 15 mm thick screed bed in cement mortar (1:4) and jointed with grey cement slurry @ 3 Kg/Sqm, and pointed with white with admixture of pigment to match with shade of granite stone including grinding, polishing, rounding and moulding of stone slabs on edges complete all as specified and directed. | 40.00 | SQUARE METER | Excess(+) | 1 | Full Conversion | INR | 0.00 | 0.0000 | INR Zero Only | ||||||||||||||||||||||||||||||||||||||||||||
| 21.00 | Material and labour for machine cut prepolished of approved shade kota stone slab 20-25 mm thick (Size of each stone not less than 55cm x 55cm), laid in flooring, over and including cement screed bed 15mm thick in cement mortar 1:6 base set and jointed in neat cement slurry @ 3.00 kg/Sqm and pointed in white or coloured cement to match the surface mixed with pigment to match shade of the slab including cutting, waste complete all as specified and directed. | 200.00 | SQUARE METER | Excess(+) | 1 | Full Conversion | INR | 0.00 | 0.0000 | INR Zero Only | ||||||||||||||||||||||||||||||||||||||||||||
| 22.00 | Material and labour for machine cut prepolished of approved shade kota stone slab 20-25 mm thick size of each stone in single piece (of length not more than 1200mm), laid on vertical surfaces of riser of steps, skirting/dado, over and including cement screed bed 15 mm thick in cement mortar 1:4 and set and jointed in neat cement slurry @ 3.00 kg/Sqm and pointed in white or coloured cement to match the surface mixed with pigment to match shade of the slab including cutting, waste complete all as specified and directed. | 20.00 | SQUARE METER | Excess(+) | 1 | Full Conversion | INR | 0.00 | 0.0000 | INR Zero Only | ||||||||||||||||||||||||||||||||||||||||||||
| 23.00 | Supply and fixing of 5 mm thick solid coloured / textured PVC sheet, solid PVC wall paneling/ lining PVC sheet inclusive of solvent cement and fixing at site with and including 5 mm thick PVC sheet fillets of width 35 mm for wall paneling inclusive of fixing on wall to make PVC frame as per specification and directed including taking down of existing wall lining, board or insulation board including cover fillets of any type and thick complete all as specified and as directed. NOTE: - Unit rate quoted against this item shall also includes taking down and refixing the same of any electrical board, switch, sockets, light and fittings, fans etc after carrying out necessary relevant work and making good to match with existing surface effected for this area etc complete all as specified and directed. | 300.00 | SQUARE METER | Excess(+) | 1 | Full Conversion | INR | 0.00 | 0.0000 | INR Zero Only | ||||||||||||||||||||||||||||||||||||||||||||
| 24.00 | Supply and fixing in repair anodised aluminium powder coated (minimum thickness of powder coating 50 micron) three track window (two shutters glazed and one shutters wire gauge) with frame, glazed with 5.5 mm thick tinted glass and, wire gauge with stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40 mm including rubber bead joining cleat for fixing in position, concealed type lock for all three shutter, PVC roller etc all as specified below, including the cost of EPDM rubber /neoprene gasket required complete all as specified and directed. (a) Frame (top & side) section shall of size 92.00 x 31.75 x 1.50 mm ( Section No 20831) (b) Frame (bottom) section shall of size 92.00 x 31.75 x 1.50 mm ( Section No 20832) (c) Top & side Members of shutter Section shall be be of size 18.00 x 40.00 x 1.55 (Section No 20738) (d) Shutter Interlock Section shall be be of size 18.00 x 40.00 x 1.45 (Section No 20737) (e) Bottom Members of shutter Section shall be of size 18.00 x 40.00 x 1.55 (Section No 20736) NOTE : - Section No given above are of make Jindal, contractor may use similar section of other make mentioned in relevent Appx | 35.00 | SQUARE METER | Excess(+) | 1 | Full Conversion | INR | 0.00 | 0.0000 | INR Zero Only | ||||||||||||||||||||||||||||||||||||||||||||
| 25.00 | Supply and fixing 5.5 mm thick tinted glass in square exceeding 0.5 sqm in each pane with heat reflecting properties, fixed to aluminium frame with glazing clips, etc., complete all as specified and as directed. | 18.00 | SQUARE METER | Excess(+) | 1 | Full Conversion | INR | 0.00 | 0.0000 | INR Zero Only | ||||||||||||||||||||||||||||||||||||||||||||
| 26.00 | Supply and fixing in repair of aluminium alloy anodized (powder-coated) door frame and shutters with hollow aluminium anodized sections as specified including aluminium alloy anodized snap type beads, dish type door handles, glazed clip, jointing cleats, rubber packing, gasket, lock 4 levers, 02 Nos aluminium alloy anodized tower bolts to each leaf etc. including fixing frame to wall/RCC members etc. with rawl plugs complete all as specified and directed. Sections of frame and door shall be as follows : - (a) Door Frame single groove 101.6 mm x 44.45 mm x 2.15mm thick. (b) Shutter top 47.62 mm x 44.45 mm x1.95 mm thick. (c) Shutter bottom 114.30 mm x 44.45 mm x 2.1 5mm thick. (d) Shutter vertical 85 mm x 44.45 mm x 1.80 mm thick. (e) Shutter middle 83.5 mm x 44.45 mm x 2.40mm thick. (f) Gauging clip weighing not less than 0.097kg/metre. NOTE: - Glass pane shall be measured and paid separately. | 22.00 | SQUARE METER | Excess(+) | 1 | Full Conversion | INR | 0.00 | 0.0000 | INR Zero Only | ||||||||||||||||||||||||||||||||||||||||||||
| 27.00 | Supply and fixing in repair of 600mm x 450mm bevelled edge mirror of selected quality glass, mounted on 6 mm thick AC bldg board or commercial plywood, fixed with aluminium angled frame and two CP MS hanging arrangements complete all as specified and directed. | 5.00 | EACH | Excess(+) | 1 | Full Conversion | INR | 0.00 | 0.0000 | INR Zero Only | ||||||||||||||||||||||||||||||||||||||||||||
| 28.00 | Supply and fixing in repair of aluminium (die cast) body door closer hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg complete all as specified and as directed | 5.00 | EACH | Excess(+) | 1 | Full Conversion | INR | 0.00 | 0.0000 | INR Zero Only | ||||||||||||||||||||||||||||||||||||||||||||
| 29.00 | Supply and fixing in repair of floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring overall length of cover plate 150mm all as specified and as directed. | 10.00 | EACH | Excess(+) | 1 | Full Conversion | INR | 0.00 | 0.0000 | INR Zero Only | ||||||||||||||||||||||||||||||||||||||||||||
| 30.00 | Supply and fixing in repair of 4 mm thick figured glass, pin head type and glazing with oil putty in opening not exceeding 0.5 sqm in each pane with oil putty or fixed with beads complete all as specified and directed. NOTE: - Glass will be fixed upto 12 metre height bldgs. | 15.00 | SQUARE METER | Excess(+) | 1 | Full Conversion | INR | 0.00 | 0.0000 | INR Zero Only | ||||||||||||||||||||||||||||||||||||||||||||
| 31.00 | Supply and fixing in repair of galvanized steel wire cloth 0.56mm nominal dia of wire and average width of aperture 1.18mm fixed with tinned tacks or galvanized wire staple complete all as specified and as directed. | 120.00 | SQUARE METER | Excess(+) | 1 | Full Conversion | INR | 0.00 | 0.0000 | INR Zero Only | ||||||||||||||||||||||||||||||||||||||||||||
| 32.00 | Supply and fixing in repair sheet glass 4mm thick, ordinary quality, in opening not exceeding 0.5 Square metre each pane and glazing with oil putty to steel window and with wooden beads to wooden shutters complete all as specified and as directed. | 120.00 | SQUARE METER | Excess(+) | 1 | Full Conversion | INR | 0.00 | 0.0000 | INR Zero Only | ||||||||||||||||||||||||||||||||||||||||||||
| 33.00 | Dismantling wrought iron or mild steel work of any description in steel trusses, purlins, roof railings, grills etc complete all as specified and directed. | 13.80 | QUINTLE | Excess(+) | 1 | Full Conversion | INR | 0.00 | 0.0000 | INR Zero Only | ||||||||||||||||||||||||||||||||||||||||||||
| 34.00 | Supply and fixing of mild steel, rolled sections as in main or cross beams, hip and jack rafters, purlin where connected to comman rafters and running rails and guides for sliding doors fixed with angle cleats or other connecting plates conforming to grade Fe-410(Gde 250), complete all as specified and directed. | 1000.00 | KILOGRAM | Excess(+) | 1 | Full Conversion | INR | 0.00 | 0.0000 | INR Zero Only | ||||||||||||||||||||||||||||||||||||||||||||
| 35.00 | Supply and fixing of mild steel, framed work such as grills, grating etc with end of bars shouldered and/ or riveted or forged into spikes, framed guard bars, barred iron doors, ladders, framed balusters, walk ways, railing framed work of water tanks and similar work including pintal hinges, stops hand made sliding bolts etc conforming to Fe-290 Gde E-165 complete all as specified and directed. | 380.00 | KILOGRAM | Excess(+) | 1 | Full Conversion | INR | 0.00 | 0.0000 | INR Zero Only | ||||||||||||||||||||||||||||||||||||||||||||
| 36.00 | Supply and fixing in repair semi perforated false ceiling 12 mm thick with micro tegular edged at all height with GRG (Glass Fibre Reinforced Gypsum) false ceiling tiles of size 595 x 595 mm of approved texture, design and pattern having moisutre content less than 2%, humidity resistance of 99%, NRC 0.60 to 0.85 as per IS 8225-1987, non combustible as per BS 476 (Part-4) 1970 and light code description unit code No 429 Sub Head 26. New Technologies and materials reflectance of 85% minimum to be laid in true horizontal level suspended on interlocking metal T -grid of hot dipped galvanised iron section of 0.33 mm thick ( galvanised @ 120 gms/ sqm including both sides) comprising of main T- runners of size 15x 32mm of length 3000mm, cross T of size 15 x32 mm of length 1200mm and secondary intermediate cross T of size 15 x 32 mm of length 600 mm to from grid module of size 600 x 600 mm, suspended form ceiliing using galvanised mild steel items (Galvanised @ 80 gm/sqm) i.e. 50 mm long, 8mm outer diameter M-6 dash fastners, 6mm dia fully threaded hanger rod upto 1000mm length and L shape level adjuster of size 85 x 25 x 2mm. galvanised iron perimeter wall angle of size 24 x 24 x 0.4 mm of length 3000 mm to be fixed on perimeter wall / partition with the help of plastic rawl plugs at 450 mm centre to centre and 40 mm long dry wall SS screws. The work shall be carried out as per specification, drawing and as per direction of the Engineer-in-Charge including dismantling existing asbestos/PVC/ metal / Gysum sheet false ceiling textile coverings including frames (if any) and cover fillets complete all as specified and directed. NOTE : - Unit rate quoted against this item shall also includes taking down and refixing the same of any electrical board, switch, sockets, light and fittings, fans etc after carrying out necessary relevant work and making good to match with existing surface effected for this area etc complete all as specified and directed. | 250.00 | SQUARE METER | Excess(+) | 1 | Full Conversion | INR | 0.00 | 0.0000 | INR Zero Only | ||||||||||||||||||||||||||||||||||||||||||||
| 37.00 | Taking down shutter of any description exceeding 1 sqm and not exceeding 2 Sqm each and refixing in same opening after easing and adjusting etc complete all as specified and directed. | 10.00 | EACH LEAF | Excess(+) | 1 | Full Conversion | INR | 0.00 | 0.0000 | INR Zero Only | ||||||||||||||||||||||||||||||||||||||||||||
| 38.00 | Demolition and breaking up drain pipes internal dia 100 mm in wall or floor position (Salt glazed ware, AC or Reinforced concrete, PVC or any other type) complete all as specified and directed. | 80.00 | RUNNING METER | Excess(+) | 1 | Full Conversion | INR | 0.00 | 0.0000 | INR Zero Only | ||||||||||||||||||||||||||||||||||||||||||||
| 39.00 | Supply and fixing of 110mm dia PVC (SWR) soil, waste and vent pipes single socketed in any length with rubber ring joints fixed to walls with stack clamps, 50 mm by 5 mm flat iron and 16mm dia round iron stays, including bolts and nuts or laid under floor complete all as specified and directed. | 40.00 | RUNNING METER | Excess(+) | 1 | Full Conversion | INR | 0.00 | 0.0000 | INR Zero Only | ||||||||||||||||||||||||||||||||||||||||||||
| 40.00 | Taking up or down steel tubing 15mm bore of pipe and connections and removal from site complete all as specified and directed. | 50.00 | RUNNING METER | Excess(+) | 1 | Full Conversion | INR | 0.00 | 0.0000 | INR Zero Only | ||||||||||||||||||||||||||||||||||||||||||||
| 41.00 | Taking up or down steel tubing 20mm bore of pipe and connections and removal from site complete all as specified and directed. | 30.00 | RUNNING METER | Excess(+) | 1 | Full Conversion | INR | 0.00 | 0.0000 | INR Zero Only | ||||||||||||||||||||||||||||||||||||||||||||
| 42.00 | Supplying and laying of CPVC pipes 16mm OD SDR 11 and Plain CPVC SDR 11 fittings complete to walls and ceilings or laid in floors including making good the disturbed surfaces as per existing wherever required, complete all as specified and as directed. | 50.00 | RUNNING METER | Excess(+) | 1 | Full Conversion | INR | 0.00 | 0.0000 | INR Zero Only | ||||||||||||||||||||||||||||||||||||||||||||
| 43.00 | Supplying and laying of CPVC pipes 20mm OD SDR 11 and Plain CPVC SDR 11 fittings complete to walls or laid in floors/roofs including making good the disturbed surfaces as per existing wherever required, complete all as specified and as directed. | 30.00 | RUNNING METER | Excess(+) | 1 | Full Conversion | INR | 0.00 | 0.0000 | INR Zero Only | ||||||||||||||||||||||||||||||||||||||||||||
| 44.00 | Dismantling water tanks exc 500 ltr and not exceeding 1000 ltr capacity and removal from site complete all as specified and directed. | 12.00 | EACH | Excess(+) | 1 | Full Conversion | INR | 0.00 | 0.0000 | INR Zero Only | ||||||||||||||||||||||||||||||||||||||||||||
| 45.00 | Supply and fixing of water storage tank of 1000 ltr capacity, HDPE triple layer, cylindrical, vertical with closed top and FDA approved, 100% UA stabilized, rust proof, fixed and hoisted in position on staging or roof complete with locking arrangement including over flow pipe, air lock pipe, brass valve 20 mm high pressure with polythene float and flynut, ISI marked, screwed and suitable for iron pipe 20 mm bore complete all as specified and directed. NOTE : - Tank shall be white and make of tank shall be engraved on the tank. | 6.00 | EACH | Excess(+) | 1 | Full Conversion | INR | 0.00 | 0.0000 | INR Zero Only | ||||||||||||||||||||||||||||||||||||||||||||
| 46.00 | Supply and fixing of water storage tank of 500 ltr capacity, HDPE triple layer, cylindrical, vertical with closed top and FDA approved, 100% UA stabilized, rust proof, fixed and hoisted in position on staging or roof complete with locking arrangement including over flow pipe, air lock pipe, brass valve 20 mm high pressure with polythene float and flynut, ISI marked, screwed and suitable for iron pipe 20 mm bore complete all as specified and directed. NOTE : - Tank shall be white and make of tank shall be engraved on the tank. | 6.00 | EACH | Excess(+) | 1 | Full Conversion | INR | 0.00 | 0.0000 | INR Zero Only | ||||||||||||||||||||||||||||||||||||||||||||
| 47.00 | Supply and fixed in repair of vitreous china half stall urinal complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60 mm long brass screws, pointing around urinal back in cement including flush pipe, CP waste fitting, grating and Union for discharge pipe ,waste pipe complete all as specified and directed. | 6.00 | EACH | Excess(+) | 1 | Full Conversion | INR | 0.00 | 0.0000 | INR Zero Only | ||||||||||||||||||||||||||||||||||||||||||||
| 48.00 | Supply and fixing in repair of vitreous china wash hand basin white flat back of size 550 x 440 mm including CI brackets and PVC connection 450 mm long having PTMT nuts and 32 mm dia brass chromium plated waste coupling and making good to disturbed portion including 32 mm dia PVC waste pipe etc., complete all as specified and directed. | 6.00 | EACH | Excess(+) | 1 | Full Conversion | INR | 0.00 | 0.0000 | INR Zero Only | ||||||||||||||||||||||||||||||||||||||||||||
| 49.00 | Supply and fixing in repair of vitreous china squatting pan of 'Orissa' pattern' size 580 x 440mm white (Ist quality) front or back inlet and foot rests of any pattern complete including provision of lime concrete bed and connection to flush pipe excluding flushing cistern, flush pipe and bracket and making good the disturbed area complete all as specified and directed. | 6.00 | EACH | Excess(+) | 1 | Full Conversion | INR | 0.00 | 0.0000 | INR Zero Only | ||||||||||||||||||||||||||||||||||||||||||||
| 50.00 | Supply and fixing in repair of 10 litre capacity virgin polypropylene cistern, white at low level complete with 32 mm bore PVC flush pipe of suitable length, PVC connection 450 mm long having PTMT nuts including bracket and making all connections and making good the disturbed surfaces in cement mortar (1:3) to match with the existing surface, complete all as specified and directed. | 6.00 | EACH | Excess(+) | 1 | Full Conversion | INR | 0.00 | 0.0000 | INR Zero Only | ||||||||||||||||||||||||||||||||||||||||||||
| 51.00 | Supply and fixing in repair of pillars taps fancy type chromium plated cast copper alloy with capston head long screwed shanks of 15mm bore compete all as specified and directed. | 10.00 | EACH | Excess(+) | 1 | Full Conversion | INR | 0.00 | 0.0000 | INR Zero Only | ||||||||||||||||||||||||||||||||||||||||||||
| 52.00 | Supply and fixing in repair of 15 mm fancy type chromium plated bib tap brass long body with flange screwed down high pressure CP cast copper alloy with crutch or butterfly handles screwed down suitable for 15mm bore pipe or union complete all as specified and directed. | 10.00 | EACH | Excess(+) | 1 | Full Conversion | INR | 0.00 | 0.0000 | INR Zero Only | ||||||||||||||||||||||||||||||||||||||||||||
| 53.00 | Supply and fixing in repair of 15mm bore angle cock cast copper alloy chromium plated screwed down high pressure with crutch or butterfly handle complete all as specified and directed. | 10.00 | EACH | Excess(+) | 1 | Full Conversion | INR | 0.00 | 0.0000 | INR Zero Only | ||||||||||||||||||||||||||||||||||||||||||||
| 54.00 | Supply and fixing in repair of soap dish any type, fixed to plugs with chromium plated brass screws complete all as specified and directed. | 5.00 | EACH | Excess(+) | 1 | Full Conversion | INR | 0.00 | 0.0000 | INR Zero Only | ||||||||||||||||||||||||||||||||||||||||||||
| 55.00 | Supply and fixing in repair of chromium plated, towel rail, 20mm dia, D type, 60cm long between flanges complete all as specified and directed. | 5.00 | EACH | Excess(+) | 1 | Full Conversion | INR | 0.00 | 0.0000 | INR Zero Only | ||||||||||||||||||||||||||||||||||||||||||||
| 56.00 | Supply and fixing in repair of PVC connections 45 cm long and 15mm dia with brass check nuts and washers on both ends, complete all as specified and directed. | 10.00 | EACH | Excess(+) | 1 | Full Conversion | INR | 0.00 | 0.0000 | INR Zero Only | ||||||||||||||||||||||||||||||||||||||||||||
| 57.00 | Supply and fixing of PVC (SWR) 75 mm pipe single socket in any length with rubber ring joints laid in floors or in trenches etc complete all as specified and directed. | 40.00 | RUNNING METER | Excess(+) | 1 | Full Conversion | INR | 0.00 | 0.0000 | INR Zero Only | ||||||||||||||||||||||||||||||||||||||||||||
| 58.00 | Supply and fixing in repair of PVC (SWR) P trap110mm size complete all as specified and directed. | 5.00 | EACH | Excess(+) | 1 | Full Conversion | INR | 0.00 | 0.0000 | INR Zero Only | ||||||||||||||||||||||||||||||||||||||||||||
| 59.00 | Supply and fixing in repair of PVC (SWR) floor trap 75mm dia plain with PVC grating including jointing with solvent cement complete all as specified and directed. | 5.00 | EACH | Excess(+) | 1 | Full Conversion | INR | 0.00 | 0.0000 | INR Zero Only | ||||||||||||||||||||||||||||||||||||||||||||
| 60.00 | Supply and fixing in repair of 20 mm bore Stop valves, cast copper alloy screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unions complete all as specified and directed. | 10.00 | EACH | Excess(+) | 1 | Full Conversion | INR | 0.00 | 0.0000 | INR Zero Only | ||||||||||||||||||||||||||||||||||||||||||||
| 61.00 | Taking down chowkats or frames with shutter, area not exceeding 1.50 Square metre (without taking off shutters from frames) and removing from site, including cutting holes in wall/concrete for taking out existing hold fasts and making good the disturbed portion of jambs and adjoining surfaces in cement mortar (1:3) and finishing the surfaces to match with existing finish complete all as specified and directed. (NOTE : - The qouted rate shall be deemed to include for fixing of hold fast in the same opening irrespective of position of hold fasts and no separate item for making good of hold fasts shall be paid). | 30.00 | EACH | Excess(+) | 1 | Full Conversion | INR | 0.00 | 0.0000 | INR Zero Only | ||||||||||||||||||||||||||||||||||||||||||||
| 62.00 | Taking down chowkats or frames with shutter, area exceeding 1.50 Square metre but not exceeding 4 Square metre (without taking off shutters from frames) and removing from site, including cutting holes in wall/concrete for taking out existing hold fasts and making good the disturbed portion of jambs and adjoining surfaces in cement mortar (1:3) and finishing the surfaces to match with existing finish complete all as specified and directed. (NOTE : - The qouted rate shall be deemed to include for fixing of hold fast in the same opening irrespective of position of hold fasts and no separate item for making good of hold fasts shall be paid). | 30.00 | EACH | Excess(+) | 1 | Full Conversion | INR | 0.00 | 0.0000 | INR Zero Only | ||||||||||||||||||||||||||||||||||||||||||||
| 63.00 | Supply and fixing Solid WPC Door frame size 125mm X 65mm Double Rebate made from 100% LEAD FREE (single extruded process) material with density 780 kg/Cum and Manufactured by an ISO: 9001-2015 certified company, all as per specification drawings complete all as specified and directed. The door frame should be Water Proof, Termite Proof, Fire Retardent and having excellent screw holding capacity, complete all as specified and directed by Engineer-in-Charge. | 120.00 | RUNNING METER | Excess(+) | 1 | Full Conversion | INR | 0.00 | 0.0000 | INR Zero Only | ||||||||||||||||||||||||||||||||||||||||||||
| 64.00 | Supply and fixing solid WPC door frame size 100mm X 65mm Single Rebate made from 100% LEAD FREE (single extruded process) material with density 780 kg/Cbm & Manufactured by an ISO: 9001-2015 certified company, all as per specification drawings complete all as specified and directed. The door frame should be Water Proof, Termite Proof , Fire Retardent and having excellent screw holding capacity, complete all as specified and directed by Engineer-in-Charge. | 160.00 | RUNNING METER | Excess(+) | 1 | Full Conversion | INR | 0.00 | 0.0000 | INR Zero Only | ||||||||||||||||||||||||||||||||||||||||||||
| 65.00 | Supply and fixing of 30 mm thick moulded WPC factory made 100% solid door (confirming as per IS : 4020) made from 100% lead free single extruded with 2,4 or 6 raised panel design on the front side with 10mm deep mould on single side with wood grain texture and back side plain with density not less than 600kh/cum. Manufactured by an ISO: 9001-2015 certified company.The door should be water proof,termite proof,fire retardent and having screw holding capacity , complete all as specified and directed by Engineer-in-Charge. | 96.00 | SQUARE METER | Excess(+) | 1 | Full Conversion | INR | 0.00 | 0.0000 | INR Zero Only | ||||||||||||||||||||||||||||||||||||||||||||
| 66.00 | Supply and fixing 30 mm thick factory made 100% Solid WPC (Wood polymer Composite) gauzed and skeleton Shutter of required size comprising of virgin PVC resin of K Value 57-60 ( Suspension Grade ) calcium Carbonate and natural fibers ( Wood Powders/ rice husk/ wheat husk ) and Non toxic additives, made from Extrusion process WPC foam sheet Single Extruded ( Inner ) with having minimum density not less than 650 kg/cum manufactured and an ISO 9001 -2015 Certified Company, having good screw holding capacity ( Screw Withdrawal strength of 2000 N ( Face ) and 1100 N ( Edge ), Minimum Compissive of 50 N/mm2 Modulus of elasticity 850N/mm2and resistance of spread of flame of Class A category with Property of being Termite/ Borer Free.Water/ Moisture Proof and Fire Retardant. Fixing stainless Steel butt hinges of required size with necessary full body threaded star headed counter sunk stainless Steel Screws including Aluminum Jali and Stainless wiremesh as per required, complete all as specified and directed by Engineer-in-Charge. | 60.00 | SQUARE METER | Excess(+) | 1 | Full Conversion | INR | 0.00 | 0.0000 | INR Zero Only | ||||||||||||||||||||||||||||||||||||||||||||
| 67.00 | Supply and fixing of cold rolled stainless steel butt hinges 100 mm long medium weight complete all as specified and directed. | 200.00 | EACH | Excess(+) | 1 | Full Conversion | INR | 0.00 | 0.0000 | INR Zero Only | ||||||||||||||||||||||||||||||||||||||||||||
| 68.00 | Supply and fixing of aluminium anodised extruded fabricated type handle 150mm long complete all as specified and directed. | 160.00 | EACH | Excess(+) | 1 | Full Conversion | INR | 0.00 | 0.0000 | INR Zero Only | ||||||||||||||||||||||||||||||||||||||||||||
| 69.00 | Supply and fixing of 250 mm aluminum anodised sliding door bolt, ISI marked, with hasp, staple (bolt type) complete with clamps bolt not less than 16mm dia and fixing clips of sheet, cast or extruded section and fixing bolts an sliding bolt of extruded section or cast aluminum alloy, complete all as specified and directed. | 160.00 | EACH | Excess(+) | 1 | Full Conversion | INR | 0.00 | 0.0000 | INR Zero Only | ||||||||||||||||||||||||||||||||||||||||||||
| 70.00 | Supply and fixing of 200 mm long aluminium anodised barrel tower bolts of extruded section and fixed complete all as specified and directed. | 120.00 | EACH | Excess(+) | 1 | Full Conversion | INR | 0.00 | 0.0000 | INR Zero Only | ||||||||||||||||||||||||||||||||||||||||||||
| 71.00 | Material and labour for complete removal of walll existing treatment by mechanical dry wall sander machine (mechanical vacuum mechanism) having RPM not less than 1500, sanding pad of 80 grit , application of waterproof cement based putty @0.80kg (undiluted) per sqm of average thickness 2.5mm in two coats and applying two coats of oil bound distemper with mechanical spray machine complete all as specified and directed. | 800.00 | SQUARE METER | Excess(+) | 1 | Full Conversion | INR | 0.00 | 0.0000 | INR Zero Only | ||||||||||||||||||||||||||||||||||||||||||||
| 72.00 | Material and labour for complete removal of ceiling existing treatment by mechanical dry wall sander machine (mechanical vacuum mechanism) having RPM not less than 1500, sanding pad of 80 grit , application of waterproof cement based putty @0.80kg (undiluted) per sqm of average thickness 2.5mm in two coats and applying two coats of oil bound distemper with mechanical spray machine complete all as specified and directed | 150.00 | SQUARE METER | Excess(+) | 1 | Full Conversion | INR | 0.00 | 0.0000 | INR Zero Only | ||||||||||||||||||||||||||||||||||||||||||||
| 73.00 | Material and labour for preparation of new plastered surface of ceiling , application of waterproof cement based putty @0.80kg (undiluted) per sqm of average thickness 2.5mm in two coats and applying two coats of oil bound distemper with mechanical spray machine complete all as specified and directed | 50.00 | SQUARE METER | Excess(+) | 1 | Full Conversion | INR | 0.00 | 0.0000 | INR Zero Only | ||||||||||||||||||||||||||||||||||||||||||||
| 74.00 | Material and labour for preparation of old painted steel surfaces of any description over 10cm width or girth and applying one coat of synthetic enamel paint, complete all as specified and directed. Note :- Paint upto 12 mtr height bldgs over roof top. | 900.00 | SQUARE METER | Excess(+) | 1 | Full Conversion | INR | 0.00 | 0.0000 | INR Zero Only | ||||||||||||||||||||||||||||||||||||||||||||
| 75.00 | Material and labour for preparation of new plastered surface of walls, application of waterproof cement based putty @0.80kg (undiluted) per sqm of average thickness 2.5mm in two coats and applying two coats of oil bound distemper with mechanical spray machine complete all as specified and directed. | 200.00 | SQUARE METER | Excess(+) | 1 | Full Conversion | INR | 0.00 | 0.0000 | INR Zero Only | ||||||||||||||||||||||||||||||||||||||||||||
| 76.00 | Material and labour for preparation of old wooden surfaces of any description over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed. | 50.00 | SQUARE METER | Excess(+) | 1 | Full Conversion | INR | 0.00 | 0.0000 | INR Zero Only | ||||||||||||||||||||||||||||||||||||||||||||
| 77.00 | Material and labour for preparation of new plastered surface of walls , application of waterproof cement based putty @0.80kg (undiluted) per sqm of avg thickness 1.5mm in two coats and applying two coats of anti fungal weather proof grade exterior acrylic emulsion paint with mechanical spray machine complete all as specified and directed. | 200.00 | SQUARE METER | Excess(+) | 1 | Full Conversion | INR | 0.00 | 0.0000 | INR Zero Only | ||||||||||||||||||||||||||||||||||||||||||||
| 78.00 | Material and labour for complete removal of wall existing treatment by mechanical dry wall sander machine (mechanical vacuum mechanism) having RPM not less than 1500, sanding pad of 80 grit , application of waterproof cement based putty @0.80kg (undiluted) per sqm of average thickness 2.5mm in two coats and applying two coats of anti fungal weather proof grade exterior acrylic emulsion paint with mechanical spray machine complete all as specified and directed. | 300.00 | SQUARE METER | Excess(+) | 1 | Full Conversion | INR | 0.00 | 0.0000 | INR Zero Only | ||||||||||||||||||||||||||||||||||||||||||||
| 79.00 | Supply and fixing of 32mm dia PVC fancy type drapery rod including taking out of old pelmet/bracket complete all as specified and directed. | 40.00 | RUNNING METER | Excess(+) | 1 | Full Conversion | INR | 0.00 | 0.0000 | INR Zero Only | ||||||||||||||||||||||||||||||||||||||||||||
| 80.00 | Supply and fixed fancy type powder coated stainless steel elbows fixing at ends of drapery rod/curtain rod, power coated brackets fixed on wall with screwed complete all as specified and directed | 60.00 | PER PAIR | Excess(+) | 1 | Full Conversion | INR | 0.00 | 0.0000 | INR Zero Only | ||||||||||||||||||||||||||||||||||||||||||||
| 81.00 | Supply and fixing in repair of stainless steel 300mm, ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and directed. | 10.00 | EACH | Excess(+) | 1 | Full Conversion | INR | 0.00 | 0.0000 | INR Zero Only | ||||||||||||||||||||||||||||||||||||||||||||
| 82.00 | Dismantling asbestos cement, steel roof sheets (corrugated, semi corrugated etc) sheets any pattern in roof covering in patches etc of any description complete all as specified and directed. | 350.00 | SQUARE METER | Excess(+) | 1 | Full Conversion | INR | 0.00 | 0.0000 | INR Zero Only | ||||||||||||||||||||||||||||||||||||||||||||
| 83.00 | Supply and fixing in repair pre painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of any coulour having tensile strength of 550 Mpa as in roof covering /cladding to wall, fix with self tapping screws, complete all as specified and directed by Engineer-in-Charge. | 350.00 | SQUARE METER | Excess(+) | 1 | Full Conversion | INR | 0.00 | 0.0000 | INR Zero Only | ||||||||||||||||||||||||||||||||||||||||||||
| 84.00 | Supply and fixing in repair pre painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm thick of an coulour having tensile strength of 550 Mpa as in roof covering /cladding to wall, fix with self tapping screws, complete all as specified and directed by Engineer-in-Charge. | 30.00 | SQUARE METER | Excess(+) | 1 | Full Conversion | INR | 0.00 | 0.0000 | INR Zero Only | ||||||||||||||||||||||||||||||||||||||||||||
| 85.00 | Supply and fixing in repair of aluminium frame powder coated for partition /cubicals with one or more rebates including joining cleat/ screws/ fasterners for fixing etc, complete all as specified and directed by Engineer-in-Charge. NOTE : - Minimum thickness of powder coating 50 micron and thickness of aluminium section shall be 3mm. | 500.00 | KILOGRAM | Excess(+) | 1 | Full Conversion | INR | 0.00 | 0.0000 | INR Zero Only | ||||||||||||||||||||||||||||||||||||||||||||
| 86.00 | Supply and fixing in repair of 9mm thick prelaminated particle board , exterior grade, prelaminated one side with decorative choice lamination, fixed with screws or as per site requirement all as specifed and directed by Engineer-in-Charge NOTE: - Aluminum bead/ rubber packing or any item required for fixing shall be inclusive of above rate | 60.00 | SQUARE METER | Excess(+) | 1 | Full Conversion | INR | 0.00 | 0.0000 | INR Zero Only | ||||||||||||||||||||||||||||||||||||||||||||
| 87.00 | Supply and fixing in repair of 5.50mm thick sheet glass, ordinary quality and glazing in opening exc 0.50 sqm in each pane fixed in aluminium frame as per site requirements complete all as specified and directed. | 60.00 | SQUARE METER | Excess(+) | 1 | Full Conversion | INR | 0.00 | 0.0000 | INR Zero Only | ||||||||||||||||||||||||||||||||||||||||||||
| 88.00 | Supply and fixing in repair of precast cement concrete Type B0 1:2:4 (using 12.5mm graded mechanically crushed stone aggregate) louvers and jallis,45 mm thick (measured solid) ,including all mouldings and set in cement mortar 1:4 complete all as specified and directed. | 50.00 | SQUARE METER | Excess(+) | 1 | Full Conversion | INR | 0.00 | 0.0000 | INR Zero Only | ||||||||||||||||||||||||||||||||||||||||||||
| 89.00 | Supply and fixing in repair machine pressed precast concrete interlocking paver block any shape and size conforming to IS 15658-2006 of 60mm thickness, M-35 Grade, complete all as specified and directed by Engineer-in-Charge. | 250.00 | SQUARE METER | Excess(+) | 1 | Full Conversion | INR | 0.00 | 0.0000 | INR Zero Only | ||||||||||||||||||||||||||||||||||||||||||||
| 90.00 | Supply and fixing in repair of vitreous china wash down water closet pedestal pattern (EWC), While including connection to trap and to flushing pipe with ‘P’ or ‘S’ trap, making good to floor, plastic water closet seat cover with mild steel chromium plated hinges complete all as specified and directed. | 2.00 | EACH | Excess(+) | 1 | Full Conversion | INR | 0.00 | 0.0000 | INR Zero Only | ||||||||||||||||||||||||||||||||||||||||||||
| 91.00 | Supply and fixing in repair of PVC water closet seat cover , white, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device complete all as specified and directed. | 2.00 | EACH | Excess(+) | 1 | Full Conversion | INR | 0.00 | 0.0000 | INR Zero Only | ||||||||||||||||||||||||||||||||||||||||||||
| 92.00 | Supply and fixing in repair of wall mixer cast copper alloy with bend pipe for overhead shower for 'Hot' or 'Cold' screwed down for 15mm bore iron pipe or brass ferrule complete all as specified and directed. | 2.00 | EACH | Excess(+) | 1 | Full Conversion | INR | 0.00 | 0.0000 | INR Zero Only | ||||||||||||||||||||||||||||||||||||||||||||
| 93.00 | Supply and fixing in repair of central hole basin mixer cast copper alloy with 450mm braided conncection pipe ( without popup) , fancy type chromium plated screwed down , high pressure, with or without lettered 'Hot' or 'cold' screwed for 15mm bore iron pipe or brass ferrule complete all as specified and directed. | 2.00 | EACH | Excess(+) | 1 | Full Conversion | INR | 0.00 | 0.0000 | INR Zero Only | ||||||||||||||||||||||||||||||||||||||||||||
| 94.00 | Supply and fixing in repair of chromium plated shower rose with or without swivel joints, any size, including fixing to steel pipe or union with shower arm complete all as specified and directed. | 2.00 | EACH | Excess(+) | 1 | Full Conversion | INR | 0.00 | 0.0000 | INR Zero Only | ||||||||||||||||||||||||||||||||||||||||||||
| 95.00 | Supply and fixing in repair steel rolling shutters, with out ball bearing, as specified including top cover, anchoring rod, hasp and staple and one shop coat of primer erected in position as indicated, complete all as specified and directed by Engineer-in-Charge. | 65.00 | SQUARE METER | Excess(+) | 1 | Full Conversion | INR | 0.00 | 0.0000 | INR Zero Only | ||||||||||||||||||||||||||||||||||||||||||||
| 96.00 | All as per item No 95.00 here in before but gear operated type with bevel gear box and crank handle, complete all as specified and directed by Engineer-in-Charge. | 50.00 | SQUARE METER | Excess(+) | 1 | Full Conversion | INR | 0.00 | 0.0000 | INR Zero Only | ||||||||||||||||||||||||||||||||||||||||||||
| 97.00 | Supply and fixing in repair of double spring floor machine for aluminium/ toughened door upto 100kg capacity built of MS and having SS 304 cover plate, capable of holding the doors in 90 degree and 15 degree hold open position and close the door with reducing speed complete including the opening of door panel and refixing with adjustments complete all as specified and directed. | 6.00 | EACH | Excess(+) | 1 | Full Conversion | INR | 0.00 | 0.0000 | INR Zero Only | ||||||||||||||||||||||||||||||||||||||||||||
| 98.00 | NOTE:- Amount of credit of Rs. 1,56,502.00 for retrieved materials is mentioned in Schedule of Credit Page No 19 & 20 of tender documents in pdf form which will be deducted offline while acceptance of tender. | Excess(+) | 1 | Full Conversion | INR | |||||||||||||||||||||||||||||||||||||||||||||||||
| Total in Figures | 0.00 | 0.0000 | ||||||||||||||||||||||||||||||||||||||||||||||||||||
| Quoted Rate in Figures | Select | 0.0000 | 0.0000 | Zero Only | ||||||||||||||||||||||||||||||||||||||||||||||||||
| Quoted Rate in Words | INR Zero Only |
Andaman & Nicobar Tenders |Andhra Pradesh Tenders |Arunachal Pradesh Tenders |Assam Tenders |Bihar Tenders |Chandigarh Tenders |Chhattisgarh Tenders |Dadra & Nagar Haveli Tenders |Daman & Diu Tenders |Delhi Tenders |Goa Tenders |Gujarat Tenders |Haryana Tenders |Himachal Pradesh Tenders |Jammu & Kashmir Tenders |Jharkhand Tenders |Karnataka Tenders |Kerala Tenders |Ladakh Tenders |Lakshadweep Tenders |Madhya Pradesh Tenders |Maharashtra Tenders |Manipur Tenders |Meghalaya Tenders |Mizoram Tenders |Nagaland Tenders |Odisha Tenders |Pondicherry Tenders |Punjab Tenders |Rajasthan Tenders |Sikkim Tenders |Tamil Nadu Tenders |Telangana Tenders |Tripura Tenders |Uttarakhand Tenders |Uttar Pradesh Tenders |West Bengal Tenders |