To view details of this tender, please login

E-IN-C BRANCH - MILITARY ENGINEER SERVICES||CE SWC AND CE JAIPUR JAIPUR - MES

CHIEF ENGINEER JAIPUR ZONE JAIPUR

Rajasthan QTY :

Items - PROVISION OF SEWAGE TREATMENT PLANT AND UPGRADATION OF SEWAGE LINES AT ALWAR MIL STN

Starts : 2025-09-06 18:00:00 Ends : 2025-09-13 18:00:00

Add to task manager Download Now

Tender Details

Tender IDNjI4NjcxNzQ=

Tender NoNDA0NjE4MDQw

AuthorityNTc5OTUwNTA=

OrganisationOTEzMzg2MDcw

Office / State NameNzI2NjQ1ODQz

QuantityODg1MjQ3MTkw

Website

TypeMjU1MzIzNzUy

Costs

Tender Amount : ₹ 140000000

EMD Cost :₹ 1025000

EPBG (%) :3000%

Documents

Bid Document : Download Now

All File ZIP : Download Now

BOQ

Chart1

2 1

43290000

Lump sum price worked out by the contractor for "BUILDING WORKS" as listed in Schedule ‘A’ Part-I representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price prepriced by the MES 1.00

-100

208301.56

Lump sum price worked out by the contractor for "INTERNAL ELECTRIFICATION" as listed in Schedule ‘A’ Part-II representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price prepriced by the MES

-100

14530.24

Lump sum price worked out by the contractor for "INTERNAL WATER SUPPLY" as listed in Schedule ‘A’ Part-III" representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price prepriced by the MES

-100

3696699.35

Lump sum price worked out by the contractor for "ROAD, PATH AND CULVERT" as listed in Schedule ‘A’ Part-IV representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price prepriced by the MES

-100

2346208.07

Lump sum price worked out by the contractor for "SEWAGE DISPOSAL/NETWORK " as listed in Schedule ‘A’ Part-V representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price prepriced by the MES

-100

1046822.4

Lump sum price worked out by the contractor for "AREA DRAINAGE " as listed in Schedule ‘A’ Part-VI representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price prepriced by the MES 6.00

-100

756204.1

Lump sum price worked out by the contractor for "EXTERNAL WATER SUPPLY" as listed in Schedule ‘A’ Part-VII representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price of prepriced by the MES

-100

3504722.05

Lump sum price worked out by the contractor for "EXTERNAL ELECTRIFICATION" as listed in Schedule ‘A’ Part-VIII representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price of prepriced by the

-100

488632.68

Lump sum price worked out by the contractor for " DG SETS " as listed in Schedule ‘A’ Part-IX representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price prepriced by the MES 9.00

-100

449151.03

Lump sum price worked out by the contractor for "UTILISATION OF TREATED WATER " as listed in Schedule ‘A’ Part-X representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price of prepriced by th

-100

3631018.09

Lump sum price worked out by the contractor for "SITE CLEARANCE, SITE DEVELOPMENT AND EARTH WORK" as listed in Schedule ‘A’ Part-XI representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price

-100

Sch 'A' Part-XII MISC ITEMS (TO BE QUOTED BY CONTRACTOR) Notes: (i) This schedule is not pre-priced by MES and the pre-priced rate indicated as "Rs 0.00" under column 5 signifies this fact only. (ii) Excavation and earth work except for the items wh

540

SEWAGE DISPOSAL/NETWORK M&L for Double wall corrugated (DWC) HDPE Pipes (SN8) confirming to IS-16098 Part-2 having internal dia 200 mm, laid and jointed etc complete all as specified and as directed. 13.00

1244

M&L for Double wall corrugated (DWC) HDPE Pipes (SN8) confirming to IS-16098 Part-2 having internal dia 250 mm, laid and jointed etc complete all as specified and as directed. 14.00

S & F 200mm dia DWC full coupler complete all as specified and as directed. 15.00

121

S & F 250mm dia DWC full coupler complete all as specified and as directed. 16.00

1244

M&L for plain cement concrete (1:4:8) type D2 (Using 40 mm graded crushed stone aggregate) as in bed to drain pipes including packing under and haunching against the sides of pipe after they are laid and tested for 250 mm bore pipe complete all as specifi

1280

Supply, laying, jointing & testing of class K9 DI pipes of 250mm bore dia with spigot and socket, suitable for Push on rubber joint, with internal cement mortor lining, and external zinc and black bitumen coated pipes in any lengths conforming to IS:8329-

S&F for installation and testing cast iron double end flanged and drilled non return valve conforming to IS - 5312 suitable for 250 mm bore pipes etc complete all as specified and directed. 19.00

Supply, installation and testing Cast Iron Sluice valve flanged Type, class PN 1.6 , 250 mm bore ISI marked conforming to IS- 14846-2000 complete with stainless steel spindle flanged both ends drilled, CI gate with brass ring and iron wheel handle suit

Supply and fixing SFRC manhole cover minimum 600mm dia or above as shown on drawing etc complete all as specified and directed. 21.00

EXTERNAL WATER SUPPLY M & L for construction of Valve pit of size 900mmX900mmX 900 mm with brick masonry constructed including necessary excavation and earth work in soft/loose soil, brick work, plastering, white wash, PCC coping, MS frame made out of

137

Boring of holes under road, pavement, hard standing by trenchless technology using ultra sounding technique and necessary machine including HDPE pipe of 150 mm dia suitable for 0.4 mpa working pressure etc complete all as specified and directed by Enginne

EXTERNAL ELECTRIFICATION Supply and installation of 100 KVA compact sub station with non extensible RMU consisting of 01 No. manually operated 11 KV, 630 Amps VCB, HT cable/ Bus bar, transformer 100 KVA, 11 KV/433V CRT dry type & associated LT devices (AC

HV Section HT 12 KV, 3 phase 50 Hz totally metal clad withdraw able type vaccum circuit Breaker INCOMER CUM OUTGOER (ICOG) panel with Copper bus bar of suitable rating , horizontal isolation type VCB of capacity minimum 630 Amps rated current, as per IEC

(a) Manually and motor operated (230V,AC,50Hz) spring charged type, manually and electrically open (electrical - 110VDC ) operation type, incorporating mechanical as well as electrical ON/OFF indication "OFF" push button, test/service position limit switc

(iii) 8 window Annunciator SI800 model (iv) Power pack with 7 AH Battery along with battery charger for 24 V DC circuit. (C) The following meters, indications and accessories are to be provided with the panel : (i) Digital Volmeter range 0-12KV with nece

The transformer shall comprises following: (i) 03 Nos porcelain bushings with copper rod on HV side. (ii) 04 Nos bushing on LV Side. (iii) Oil level guage,oil drain filter valve,lifting hucks,oil filling hole with cap/plug with connection plate, Air rele

(vi) 02 Nos earthing terminals on tank cover to facilitate fixing of 50x6mm GI earth strip for earthing of body including rating plate and terminal marking plate. All date shall me marked on Rating plate. (vii)First fill of unused and new transformer oil,

(c) MCCB 4 Pole 100 amps ,415 Volt of breaking capacity not less than 25 KA (Ics=100 % of Icu) with Adjustable Thermal setting (Optium 2.0) - 01 Nos (for Panel-C). (d) LED Indicator lamp (R,Y,B) - Set of Three. (e) Digital Ammeter 0-400A with suitab

Capacitor Bank:- 25A MCB TP suitable for 12.5 KVAR- 2 Nos 63A MCB TP suitable for 25 KVAR-1 No 100A MCCB TP suitable for 50 KVAR-3Nos Capacitive duly contactors- Capacitive-duly contactors suitable for 12.5 KVAR-2Nos Capacitive-duly contactors suitable fo

Enclosure Section Outdoor type enclosure having construction of Galvanised Sheet Steel with combination of 1.5/2mm thickness with 4mm HRCA base frame.The Enclosure shall have IP54 degree of protection for HT & LT switchgear compartment & IP23 degree of pr

Supply, install, test and commission LT panel board indoor type CPRI approved, 3 phase, 4 wire, 415 volts with 100 Amps Aluminium bus bar, digital type with inbuilt selector switch and suitable CTs, indicator lamps, outdoor cubical type, IP 54, dust a

INCOMING:- (a) Aluminium bus bar capacity 100 Amps for Phase-R-Y-B- & neutral (b) MCCB FP

(l) LED indicator lamp R,Y,B (1set of three) (m) Nature switch for automatic switching of street light based on LUX level of natural light of sensor (nature switch) along with suitable power contactors and MCB's (input-output) should be enclosed in panel/

Supply and fix , testing , commissioning of LT weather proof panel board powder coated outdoor type double door shutter, made out of CRCA 3.15 mm thick outer and 1.6 mm thick for inner door confirming to IS 8623 with angle iron 50x50x6 mm outdoor, floor

PCC block type 0.6 Mtr above ground level grouting etc all as specified and directed with the following work also includes provision of suitable size of cable glands, cable lugs, nut, bolts, washers etc . The bottom portion of enclosure shall be minimum

(g) MCB DP 10 Amps 10 KA 'C' series - 01 No (For Treated water pump) (h) MCCB FP 25 KA 16 Amps - 1 No for Building & street lights (i) MCCB FP 25 KA 16 Amps - 1 No for Sewage Pumping station (j) Digital ammeter 0-400 Amps of size 96x96 sq mm with selector

M&L for Non clog vertical submersible pumps with chrome steel impeller and cutter, non-clog to pass 40 mm size particles including Supply, installation with guide rail and lifting chain, cables, Earthing, testing complete with 2 years maintenance for 350

Supply & fix sintex box of size 195 X 135 X 90 mm Cat No GS-JB-2014 Hinged (L) wiith 2 way terminal mounted on epoxy nsulators for looping of cable for 1Phase and 1neutral fixed on pole with the help of MS nuts bolts and MS clamps-2 Nos of size 40

Supply and erecting cable route marker for LT Cable made of precast RCC (1:2:4) using 20mm graded stone aggregate cast in pillar of size 15x10x60cm including reinforcement with 4 nos 10mm dia deframed bars of 55 cm length and link/strapps of 8mm dia bar

Supply and erecting cable route marker for HT Cable made of precast RCC (1:2:4) using 20mm graded stone aggregate cast in pillar of size 15x15x60cm including reinforcement with 4 nos 10mm dia deframed bars of 55 cm length and link/strapps of 8mm dia bar

DG SETS Supply and install, testing and commissioning of diesel engine driven generating set with AMF PANEL panel 62.5 KVA or available nearby capacity with water cooled engine for 48 KW power generation RPM 1500, brushless frame with silencer and Canopy

(A) PRIME MOVER:- Suitable for driving 48 KW/62.5 KVA alternator water cooled battery start diesel Engine of suitable capacity confirming of ISO 10000 / BS 5514 BSS 649 and fuel tank suitable for 12 hrs running capacity mounted on MS frame pedestal suppor

(vi) RPM indication (vii) Over speed indication (viii) Low lub. Oil trip indication (ix) Engine Hours indication (B) ALTERNATOR: 48 KW/60 KVA at 0.8 PF Brushless self excited, self regulaed 3 phase 50 Hz 415 V 1500 RPM 4 wire screen protected drip proof

(D) AUTOMATIC MAINS FAILURE PANEL :- AMF panel for 48 KW/60 KVA DG Set fabricated out of sheet steel factory made suitable for floor mounting/fitted with cabinet hinged from panel for easy asessibility with suitable rated bus bar internal wiring and with

viii) Generator Current (Amps) ix) Power factor x) KWHR xi) KW d) Alarm/Hooter e) Bty charger connected to main supply side to charge bly comprising the following :- f) DC ammeter & voltmeter digital type g) Charge rate selection for tricle or high charg

ii) Necessary foundation for installation of DG set shall be provided as per manufaturers recommendations and cost deemed to be inclusive in the rate quoted for this item. iii) All testing equipments are to be arranged by the contractor and testing shall

Supply and install, testing and commissioning of diesel engine driven generating set with AMF PANEL panel 100 KVA with water cooled engine for 80 KW power generation RPM 1500, brushless frame with silencer and Canopy for sound less mode (sound level not e

manufacturers instructions, Power Command genset Controller, fuel pipes, Dual spin on fuel filter, Dry type Aircleaner, Shutt off coil with safeties for LLOP/HWT fuel pipes meter, hour meter, oil temperature gauges, ammater, ignition switch, radiator with

taking 10% over load tone hr in any 12 hrs operaton complete with the following standard accessories:- (a) Engine mounted Instrument Panel fitted with and having digital display for following:- (i) Start-stop switch with key (ii) Water temperature indicat

C) ACOUSTIC ENCLOSURE: Floor mounted totally enclosed acoustic enclosure of suitable size as per CPCB norms duly epoxy painted, installed as PCC 1:2:4, type B-2 platform 300mm above GL according to size of generartor. It shoud be made out of min 2mm thick

(D) AUTOMATIC MAINS FAILURE PANEL :- AMF panel for 80 KW/100 KVA DG Set fabricated out of sheet steel factory made suitable for floor mounting/fitted with cabinet hinged from panel for easy asessibility with suitable rated bus bar internal wiring and wit

(vii) Generator Volts-Phase-Neutral & Phase-Phase viii) Generator Current (Amps) ix) Power factor x) KWHR xi) KW d) Alarm/Hooter e) Bty charger connected to

UTILISATION OF TREATED WATER M&L for brick masonary valve pit of size 1.20 x 1.20 x 1.20 Mtr (internal size of chamber) depth of chamber to be reckoned from top of PCC in foundation to top of MS cover as 1.20 Mtr and including 3.15mm thick MS plain black

M&L for brick masonary valve pit of size 0.90 x 0.90 x 1.20 Mtr (internal size of chamber) depth of chamber to be reckoned from top of PCC in foundation to top of MS cover as 1.20 Mtr and including 3.15mm thick MS plain black sheet cover with frame of ang

1120

Supply, Laying, jointing & testing of Ductile Iron (DI) of size 100mm dia, pressure pipeswith spigot and socket ends, centrifugally cast, class K-7, with cement mortar lining in inner side as per IS:8329-2000 (Latest revision) and other relevant standards

1152

Supply, laying, joining & testing of class K-7 DI pipes of 250 MM bore dia with spigot and socket, suitable for push on rubber joint, with internal cement mortar lining and external zinc and black bitumen coasted pipes in any lengths conforming to IS: 832

1100

Supply, laying, joining & testing of class K-7 DI pipes of 200 MM bore dia with spigot and socket, suitable for push on rubber joint, with internal cement mortar lining and external zinc and black bitumen coasted pipes in any lengths conforming to IS: 832

Supplying, installing, testing & commissioning of Hydro-Pneumatic system comprising of vertical type Pump with SS Impeller, SS Shaft along with motor, pressure gauge with isolation cock, Isolation valve, NRV on delivery line. Isolation valve, stainer (wit

Cast Iron Air Valves with two air Outlets, 200 mm dia bore and fixing Up in cast iron water supply mains complete etc complete all as specified and as directed. 40.00

Cast Iron Air Valves with two air Outlets, 150 mm dia bore and fixing Up in cast iron water supply mains complete etc complete all as specified and as directed. 41.00

Cast Iron Air Valves with two air Outlets, 100 mm dia bore and fixing Up in cast iron water supply mains complete etc complete all as specified and as directed. 42.00

Supply, install, testing and Commissioning of manufacturer's factory assembled and tested electric driven centrifugal pump set of capable of delivering 500 LPM at 35 mtr head comprising of horizontal centrifugal pump CI body with impellers operating at 29

Supply, install, test and commissioning of Motor control Each panle, CPRI approved, 3 phase, 4 wire, 415 volts with 32 Amps Aluminium bus bar, digital type with inbuilt selector switch and suitable CTs, indicator lamps, outdoor cubical type, IP 54, dust a

Supply, install, test and commissioning of Motor control Each panle, CPRI approved, 3 phase, 4 wire, 415 volts with 200 Amps Aluminium bus bar, digital type with inbuilt selector switch and suitable CTs, indicator lamps, outdoor cubical type, IP 54, dust

b)3 Pole MCCB 32 Amp, 50 Hz. 415 V with rupturing capacity 25 KA-02 Nos c)Star delta Starter fully automatic suitable for 415 V AC For 15.0 HP Motor-02 Nos d) Voltmeter digital with selector switch-01 No e) Ammeter degital with selector switch - 01 No f)

STP &SPS, SHED FOR SCREW PRESS For item No. 46.00 to 78.00 :- Supply, installation, testing & commissioning of Sewage Treatment Plant based on principle of aerobic attached growth non clogging randomly Moving Bed Bio-reactor (MBBR) having capacity 0.5 MLD

Fine bar screen of SS construction as per given specifications, to prevent floating objects passing through it etc complete all as per manufactures specificitions: Number of unit : 1 No. Type : Fine Material of Construction : Stainless Steel – 316 Clear

Fine bar screen Mechanical cleaning of SS construction as per given specifications, to prevent floating objects passing through it etc complete all as per manufactures specificitions: Number of unit : 1 No. Type : Circular Wedge Wire Screens Material of

Oil Skimmer for removal of Oil & Grease trap chamber etc complete all as per manufactures specificitions: Qty. : 01 No. Type : Slotted pipe / Belt type Capacity : 1500 LPH 50.00

One lot of air grid for equalization tank for providing aeration in the tank, etc complete all as per manufactures specificitions: Air Grid Type : Header & lateral MOC of Air Grid : uPVC Aeration air required : 133 m3/hr AIR ROTAMETER Type : Glass Tube

One lot of air grid for equalization tank for providing aeration in the tank, as specified in PS Air Grid Type : Header & lateral MOC of Air Grid : uPVC Aeration air required : 177 m3/hr AIR ROTAMETER Type : Glass Tube Qty : 01 No. Note : Fine bubble diff

Raw sewage centrifugal mono bloc pumps complete with motor and all necessary accessories and fittings, to be installed for transferring sewage from equalization tank to process reactor. Level sensor provided in the tank and interlinked with pumps for ON-O

Twin Lobe Type type Air blower with motor in acoustic enclosure, for providing air in equalization tank, MBBR reactors & Sludge holding tank. One no. Air rotameter is to be provided in each line to MBBR reactor 1 & 2, equalisation tank, sludge holding tan

Tri lobe Air blower with motor in acoustic enclosure, for providing air in equalization tank, MBBR reactors & Sludge holding tank. One no. Air rotameter is to be provided in each line to MBBR reactor 1 & 2, equalization tank, sludge holding tank for measu

Anoxic submersible type Mixer. Mixer : 01 Mixer type : External Propeller Mixer Mixer MOC : MSEP Power Rating : 02 HP Dia of impeller : 220 mm Thrust : 115 N Each 57.00

Anoxic submersible type Mixer. Mixer : 01 Mixer type : External Propeller Mixer Mixer MOC : MSEP Dia of impeller : 220 mm Thrust : 115 N Each Power rating : 2 HP 58.00

MBBR internals comprising of media, SS air grid & SS rise pipe, media retaining sieves, etc. comprising the following:- Media Type : Cylindrical/ circular shaped Media -Wagon wheel design having externa lfins, surface area- 400 m2/m3, nontoxic Mat

Sewage centrifugal monobloc self-priming recirculation pumps complete with motor and all necessary accessories and fittings for recirculation of biomass with sewage to the anoxic chamber. One pressure gauge for each pump has to be provided to measure pres

Tube settler tank internals comprising of media & collection trough, material of construction- UV stablized Virigin PVC base. Type : Square tube PVC Qty : 01 No. Media straight height / media height at 60 degrees. : 1150 mm / 1000 mm MOC of Media : UV S

Tube settler tank internals comprising of media & collection trough, material of construction- UV stablized Virigin PVC base. Type : Square tube PVC Qty : 01 Nos. Media straight height / media height at 60 degrees. : 1150 mm / 1000 mm MOC of Media : UV

Sludge Holding Tank air grid as specified. Air Grid Type : Header & lateral MOC of Air Grid : uPVC Aeration air required : 11.5 m3/hr AIR ROTAMETER Type : Glass Tube Qty : 01 No. Note : Fine bubble diffuser and course bubble diffuser should be provided as

Sludge Holding Tank air grid as specified. Air Grid Type : Header & lateral MOC of Air Grid : uPVC Aeration air required : 24 m3/hr AIR ROTAMETER Type : Glass Tube Qty : 01 No. Note : Fine bubble diffuser and course bubble diffuser should be provided as p

Set of Sodium Hypo Chlorite dosing system comprising of 2 nos. dosing pump and one no. Solution tank, all as specified. Disinfectant : Free Chlorine Chlorine Dosage : 4-5 mg/ltr Qty. : 01 No. Hypo Solution tank capacity : 200 ltrs MOC : PVC

Filter feed centrifugal monobloc pumps complete with motor and all necessary accessories and fittings for feeding tertiary unit, Level sensor should be provided in the chlorine contact cum filter feed tank and interlinked with pumps for ON-OFF operation a

Dual Media filter, complete with media, frontal piping, valve and pressure gauges to measure pressure across the filter. Diameter of Filter : 1500 mm Height : 1800 mm Material of Construction : Mild Steel bituminous paint inside Thickness of Sheet : 6 mm

Dual Media filter, complete with media, frontal piping, valve and pressure gauges to measure pressure across the filter. Diameter of filter- 2000 mm, Height- 1600 mm, Material of construction- Mild steel, Thickness of sheet- 6 mm (shell) and 8 mm (dish),

Activated Carbon Filter of complete with media, frontal piping, valve and pressure gauges to measure pressure across the filter. Diameter of Filter : 1600 mm Height : 1800 mm Material of Construction : Mild Steel Thickness of Sheet : 8 mm shell / 10 mm

Activated Carbon Filter of complete with media, frontal piping, valve and pressure gauges to measure pressure across the filter. Diameter of Filter : 2200 mm Height : 1800 mm Material of Construction : Mild Steel Thickness of Sheet : 8 mm shell / 10 mm

Electromagnetic flow meter with inline full bore electormagnetic type havong bi-directional flow and tolallisation facitlity etc complete all as specified and directed. 73.00

Set of multiple parameters analyser for BOD / TSS / COD / pH with sampling pump, having reagent and chemical s batch type having online auto zero calibration for COD/BOD/TSS with offset correction as specified in PS, complete with software and PC & printe

Compensation: Auto turbidity and colour compensation Interference: Independent of flow and pressure variations Type : Advanced microprocessor-based system Accuracy : COD/BOD/SS: ± 5% - 10% of F.S. pH : ±0.1 pH. Display type : Touch screen, alpha numer

Set of Chlorine analyser for monitoring of residual chlorine having resolution 0.01 mg/l, respond time 60 seconds, micro processor based program as specified in PS. Qty : 01 Set Resolution : 0.01 mg/l Accuracy : ≤ 2% of Full Scale Response Time : T90 in 6

One lot of suitable size Piping & manual valves of suitable material as follows:- Piping: MS'C' Class wherever exposed & SS wherever submersed. Valve:- Cast Iron to interconnect various units of sewage treatment plant, as per approved drawings. 76.00

One lot of stairs, platform, railing, etc. complete all as specified and directed. 77.00

S&F set of potassium permanganate dosing system 2 Nos dosing pump and 01 no solution tank all as specified and directed:- Disinfectant : Potassium Permanganate Potassium Dosage : 4-5 mg/Ltr Process of Dosing : Electronic metering dosing pump No

SEWAGE PRESSURE PIPE LINE, PUMPS AND SCADA SYSTEM Supply, Installation Testing & Commissioning of Indoor type PLC (Programmable Logic Controller) based STP Automation, Protection Panel with Wireless Radio Frequency based communication, suitable for contro

A)The Panel should comprise the following items:- (i) Water Level Sensing & Display (ii) Automatic Pump On/Off (ii) Automatic Toggling of Pumps (iv) Auto Change Over In Case of Pump Failure (v) Single Phasing Prevention (vi) Manual Mode Operation (all con

(C) 01 No. HMI - 7" Graphical Touch screen display (i). 01 No. RS 485 and 01 No. USB port (ii). Serial multilink, USB downloading port (ii). Support external data storage on a USB memory stick for storing production data and backing up applications (D) 0

Supply, Installation Testing & Commissioning of Outdoor type having Canopy and Double Door for weather protection, PLC ( Programmable Logic Controller) based Pump and Valve Automation, Protection Panel with Wireless Radio Frequency based communication, su

The panel should be of minimum size 1000 X 950 X 300 mm front opening type, fabricated from 3.15 mm thick CRCA Sheet & mounting channel 40x40x5mm made out of Angle iron with proper ferrule & cable gland, internal wiring with PVC insulated multistranded co

(C) 01 No. HMI - 7" Graphical Touch screen display (i). 01 No. RS 485 and 01 No. USB port (ii). Serial multilink, USB downloading port (iii). Support external data storage on a USB memory stick for storing production data and backing up applications (D)

Supply, Installing,Testing and Commissioning of Ultrasonic Level Transmitter at dugwell and underground sump for measurement of level with following specification:- Range : 0-8 meters

Supply, Installation, testing and Commissioning of 150 mm dia, single phase, Motor Actuated Butterfly valve with disc material SS - 304, Stem Material SS - 431, Seat EPDM, hand wheel for manual operation and having 05 nos. limit switches in total includin

Supply, Installation, testing and Commissioning of 100 mm dia, single phase, Motor Actuated Butterfly valve with disc material SS - 304, Stem Material SS - 431, Seat EPDM, hand wheel for manual operation and having 05 nos. limit switches in total includin

Supply, Installation, testing and Commissioning of 50 mm dia, single phase, Motor Actuated Butterfly valve with disc material SS - 304, Stem Material SS - 431, Seat EPDM, hand wheel for manual operation and having 05 nos. limit switches in total including

Supply, Installation, Testing and Commissioning and Programming of Master Control Station. The scope includes:- Services for programming, configuration and customisation of the Smart Station Platform with respect to the Sewage Module as per actual site co

(f). Personal Computer as central Server for development version of the scada software and reporting the software with following specifiaction:- Intel 10th Gen Core I5, 8 GB RAM, 500 GB HDD, Keyboard / Mouse Make:- DELL, HP, LENOVO & 55 inches LED monitor

Supply, Installation, Testing, Commissioning and Programming of Omni and Bi Directional Parabolic antenna with control station to generate strong directional effect with WLAN network support having mast mounting arrangment. Control station should operate

Supply, Installation, Testing, Commissioning and Programming of Reporting Software with user configurable reports along with data collection of parameters, events, alarms complete with user defined logo, user name, date and time, page no., header and foot

Supply, Installation, Testing, Commissioning and Programming of Smartphone App for Android Operating System consisting of min 20 Screens with user defined format. With this feature client can remotely view project screens on different types of thin client

Supply, Installation, Testing, and Programming of PLC based MIMIC PANEL of a minimum size 800 (W) x 800 ( H ) x 250 (D) (min) made out of 2MM CRCA sheet with Angle iron Stand of size 800 (W) x 300 ( H ) x 250 (D), all properly polished depicting in realt

Supply, installation, testing, and commissioning of Pressure Transmitter with proper wiring including necessary power pack for supply of DC :- Power supply: 10-36 V DC Enclosure: whether proof IP 65 Process temperature: -10 to 90 Celsius Accuracy: 0.25

Supply, Installing,Testing and Commissioning of Turbidity & pHTransmitter at Pure water sump all as specified and directed Range : 0.001 - 100 NTU Range : 0-14 pH

200

Supply, Installation, Testing and Commissioning of 4 pair CAT 6 UTP cable for Sensors & Communication.etc complete all as speficied and directed. 92.00

200

Supply only 2 Core 1.5 sq. mm PVC sheathed PVC insulated copper armoured cable. etc complete all as speficied and directed. 93.00

800

Supply only 4 Core 1.5sq.mm. PVC sheathed PVC insulated copper armoured cable. etc complete all as speficied and directed.

1400

Supply only 6 Core 1.5sq.mm. PVC sheathed PVC insulated copper armoured cable.etc complete all as speficied and directed. 95.00

160

Supply and Fixing pipe galvanised iron light grade 20mm dia ( ISI marked ) with all fittings such as elbow, tee, reducer , coupling etc laid in trenches or on pole, crossing of road, fixed on wall for protection of cables complete all as specified and d

120

Supply and Fixing pipe galvanised iron light grade 50 mm dia ( ISI marked) with all fittings such as elbow, tee, reducer , coupling etc laid in trenches or on pole, crossing of road, fixed on wall for protection of cables complete all as specified and d

650

Supply, laying, joining & testing of class K-9 DI pipes of 200 MM bore dia with spigot and socket, suitable for push on rubber joint, with internal cement mortar lining and external zinc and black bitumen coasted pipes in any lengths conforming to IS: 832

Supply, installation and testing cast iron sluice valce flanged type, class PN-1.6, 200mm bore ISI marked conforming to IS-14846-2000 complete with stainless steel spindle flanged both ends drilled, CI gate with brass ring and iron wheel handle suitable f

FENCING , GATE AND COMPOUND WALL M&L for steel gate 5.5m wide and 2.1m height with RCC pillar incl excavation in soft/loose of soil, plastering, painting etc complete all as specified and shown in TD /2004/13 sh 1/3 to 3/3 CE Jaipur Zone 100.00

1977.12

Preparation of newly plastered/ previously untreated surface of wall and applying two coats of cement base paint over coat of white wash complete all as specified and directed. 101.00

247.14

PRECAST ELEMENTS for RCC PRECAST WALL 2.40 M High : Providing, transportation, fixing, erection and installation etc complete for RCC precast Elements for various sizes shapes and steel, including mould making, providing and fixing reinforcement steel,

1235.7

Notes for item No 102 & 103 here-in-before :-(i) The rate includes in quoted rates for all labour wages for each stage, machinery, cranes to lift at place at various stages etc including placement of electrical conduits and switch boxes as per drawings, p

MANNING , OPERATION AND MAINTAINANCE DURING 2 YEARS OF DEFECT LIABILITY PERIOD Manning and operation of sewage treatment plant installations including various electrical and mechanical equipment and attending minor fault of STP, maintenance of chlorine

MANNING , OPERATION AND MAINTAINANCE FOR 8 YEARS AFTER DEFECT LIABILITY PERIOD Manning and operation of sewage treatment plant installations including various electrical and mechanical equipment and attending minor fault of STP, maintenance of chlorine

Note for Item No 104.00 to 105.00 : (a) Contractor will arrange biometric attendence machine at installation and payment will only be made on the basis of biometric attendence. (b) Reliever for weekly off shall be provided by the contractor at his own

(h) All installations to be kept neat and clean all the time and security checks to be carried out daily (j) In case of any damage misuse mishandling,theft of Govt property, contractor will be held responsible for the same (k) All saftey eqpts such as bre

(s) Minimum I.T.I or any other Higher Qualification with Two years Experience certificate for Operator and Two years experince for helper employed shall be submitted. (t) The rate quoted shall be deemed to including the Providing Stationery for all above

COMPREHENSIVE MAINTENANACE FOR 8 YEARS AFTER DEFECT LIABILITY PERIOD Comprehensive maintenance of sewage treatment plant installation (capacity 1MLD and 0.5 MLD) (Total 02 Nos) including various electrical and mechanical equipments and attending fault

Total in Figures

Quoted Rate in Words

BoQ1

BoQ
BoQ_Ver3.0	Item Rate	Normal	INR Only	INR
Select, Excess (+), Less (-)	Less (-)
Tender Inviting Authority: CHIEF ENGINNER JAIPUR ZONE
Name of Work: PROVISION OF SEWAGE TREATMENT PLANT AND UPGRADATION OF SEWAGE LINE AT ALWAR MIL STN
Formation: - GE ALWAR
Bidder Name :
PRICE SCHEDULE (This BOQ template must not be modified/replaced by the bidder and the same should be uploaded after filling the relevent columns, else the bidder is liable to be rejected for this tender. Bidders are allowed to enter the Bidder Name and Values only )
Sl. No.	Item Description	Item Code / Make	Quantity	Units	Estimated Rate	Addition / Deduction	Addition / Deduction Values	Currency Convertion against each Item	Quoted Currency in INR / Other Currency	RATE In Figures To be entered by the Bidder Rs. P	Excise Duty	VAT	Freight Charges ( Unloading & Stacking)	Any Other Taxes/Duties/Levies	Other Taxes 2	IIIrd Party i.e DGS&D / RITES etc Inspection Charges @0.34%+Service Tax	Less for Cenvat Credit,if any respect of Supplies Under full Excise Duty Category	TOTAL AMOUNT	TOTAL AMOUNT With Taxes	TOTAL AMOUNT In Words	Represent (%) Percentage having Above/ Below ( + or - denomination) the Lump sum pre price inserted by MES
1	2	3	3	4	5	7	8	9	6	11	12	6	14	15	16	17	18	19	20	21	22	23	24	25	26	27	28	29	30	31	32	33	34	35	36	37	38	39	40	41	42	43	44	45	46	47	48	49	50	51	52	7	54	8	9
1.00	Lump sum price worked out by the contractor for "BUILDING WORKS" as listed in Schedule ‘A’ Part-I representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price prepriced by the MES	1.00	LUMP SUM	43290000.00	Excess(+)	1	Full Conversion	INR	0.00	0.00	INR Zero Only	-100	1.01	Supplying, Conveying and fixing spls. Including eart	item1	123.223	Nos
2.00	Lump sum price worked out by the contractor for "INTERNAL ELECTRIFICATION" as listed in Schedule ‘A’ Part-II representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price prepriced by the MES	1.00	LUMP SUM	208301.56	Excess(+)	1	Full Conversion	INR	0.00	0.00	INR Zero Only	-100	2	Construction of chamber for 100mm sluices valve	item3	10	Nos
3.00	Lump sum price worked out by the contractor for "INTERNAL WATER SUPPLY" as listed in Schedule ‘A’ Part-III" representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price prepriced by the MES	1.00	LUMP SUM	14530.24	Excess(+)	1	Full Conversion	INR	0.00	0.00	INR Zero Only	-100	1.01	Supplying, Conveying and fixing spls. Including eart	item1	123.223	Nos
4.00	Lump sum price worked out by the contractor for "ROAD, PATH AND CULVERT" as listed in Schedule ‘A’ Part-IV representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price prepriced by the MES	1.00	LUMP SUM	3696699.35	Excess(+)	1	Full Conversion	INR	0.00	0.00	INR Zero Only	-100	1.01	Supplying, Conveying and fixing spls. Including eart	item1	123.223	Nos
5.00	Lump sum price worked out by the contractor for "SEWAGE DISPOSAL/NETWORK " as listed in Schedule ‘A’ Part-V representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price prepriced by the MES	1.00	LUMP SUM	2346208.07	Excess(+)	1	Full Conversion	INR	0.00	0.00	INR Zero Only	-100	1.02	Construction of chamber for 100mm sluice plates	item2	213	Nos
6.00	Lump sum price worked out by the contractor for "AREA DRAINAGE " as listed in Schedule ‘A’ Part-VI representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price prepriced by the MES	1.00	LUMP SUM	1046822.40	Excess(+)	1	Full Conversion	INR	0.00	0.00	INR Zero Only	-100	2	Construction of chamber for 100mm sluices valve	item3	10	Nos
7.00	Lump sum price worked out by the contractor for "EXTERNAL WATER SUPPLY" as listed in Schedule ‘A’ Part-VII representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price of prepriced by the MES	1.00	LUMP SUM	756204.10	Excess(+)	1	Full Conversion	INR	0.00	0.00	INR Zero Only	-100	2	Construction of chamber for 100mm sluices valve	item3	10	Nos
8.00	Lump sum price worked out by the contractor for "EXTERNAL ELECTRIFICATION" as listed in Schedule ‘A’ Part-VIII representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price of prepriced by the MES	1.00	LUMP SUM	3504722.05	Excess(+)	1	Full Conversion	INR	0.00	0.00	INR Zero Only	-100	1.01	Supplying, Conveying and fixing spls. Including eart	item1	123.223	Nos
9.00	Lump sum price worked out by the contractor for " DG SETS " as listed in Schedule ‘A’ Part-IX representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price prepriced by the MES	1.00	LUMP SUM	488632.68	Excess(+)	1	Full Conversion	INR	0.00	0.00	INR Zero Only	-100	1.02	Construction of chamber for 100mm sluice plates	item2	213	Nos
10.00	Lump sum price worked out by the contractor for "UTILISATION OF TREATED WATER " as listed in Schedule ‘A’ Part-X representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price of prepriced by the MES	1.00	LUMP SUM	449151.03	Excess(+)	1	Full Conversion	INR	0.00	0.00	INR Zero Only	-100	1.01	Supplying, Conveying and fixing spls. Including eart	item1	123.223	Nos
11.00	Lump sum price worked out by the contractor for "SITE CLEARANCE, SITE DEVELOPMENT AND EARTH WORK" as listed in Schedule ‘A’ Part-XI representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price prepriced by the MES	1.00	LUMP SUM	3631018.09	Excess(+)	1	Full Conversion	INR	0.00	0.00	INR Zero Only	-100	1.02	Construction of chamber for 100mm sluice plates	item2	213	Nos
12.00	Sch 'A' Part-XII MISC ITEMS (TO BE QUOTED BY CONTRACTOR) Notes: (i) This schedule is not pre-priced by MES and the pre-priced rate indicated as "Rs 0.00" under column 5 signifies this fact only. (ii) Excavation and earth work except for the items which categorically includes for same shall be measured and paid separately under SCH A PART-XI (SITE CLEARANCE, SITE DEVELOPMENT AND EARTH WORK schedule).
13.00	SEWAGE DISPOSAL/NETWORK M&L for Double wall corrugated (DWC) HDPE Pipes (SN8) confirming to IS-16098 Part-2 having internal dia 200 mm, laid and jointed etc complete all as specified and as directed.	540.00	RM	Excess(+)	1	Full Conversion	INR	0.00	0.00	INR Zero Only
14.00	M&L for Double wall corrugated (DWC) HDPE Pipes (SN8) confirming to IS-16098 Part-2 having internal dia 250 mm, laid and jointed etc complete all as specified and as directed.	1244.00	RM	Excess(+)	1	Full Conversion	INR	0.00	0.00	INR Zero Only
15.00	S & F 200mm dia DWC full coupler complete all as specified and as directed.	50.00	Each	Excess(+)	1	Full Conversion	INR	0.00	0.00	INR Zero Only
16.00	S & F 250mm dia DWC full coupler complete all as specified and as directed.	121.00	Each	Excess(+)	1	Full Conversion	INR	0.00	0.00	INR Zero Only
17.00	M&L for plain cement concrete (1:4:8) type D2 (Using 40 mm graded crushed stone aggregate) as in bed to drain pipes including packing under and haunching against the sides of pipe after they are laid and tested for 250 mm bore pipe complete all as specified and directed.	1244.00	RM	Excess(+)	1	Full Conversion	INR	0.00	0.00	INR Zero Only
18.00	Supply, laying, jointing & testing of class K9 DI pipes of 250mm bore dia with spigot and socket, suitable for Push on rubber joint, with internal cement mortor lining, and external zinc and black bitumen coated pipes in any lengths conforming to IS:8329-2000 including Gasket & joints as per IS:9523-2000 laid in trenches/ Road/ Ducts/ Footpath/ on wall on floor at locations, complete all as specified and directed. Note: DI fittings required shall be measured and paid separately.	1280.00	RM	Excess(+)	1	Full Conversion	INR	0.00	0.00	INR Zero Only
19.00	S&F for installation and testing cast iron double end flanged and drilled non return valve conforming to IS - 5312 suitable for 250 mm bore pipes etc complete all as specified and directed.	1.00	Each	Excess(+)	1	Full Conversion	INR	0.00	0.00	INR Zero Only
20.00	Supply, installation and testing Cast Iron Sluice valve flanged Type, class PN 1.6 , 250 mm bore ISI marked conforming to IS- 14846-2000 complete with stainless steel spindle flanged both ends drilled, CI gate with brass ring and iron wheel handle suitable for CI/DI pipe line including jointing material i.e. nuts bolts, washer and gasket etc complete all as specified and directed.	2.00	Each	Excess(+)	1	Full Conversion	INR	0.00	0.00	INR Zero Only
21.00	Supply and fixing SFRC manhole cover minimum 600mm dia or above as shown on drawing etc complete all as specified and directed.	57.00	Each	Excess(+)	1	Full Conversion	INR	0.00	0.00	INR Zero Only
22.00	EXTERNAL WATER SUPPLY M & L for construction of Valve pit of size 900mmX900mmX 900 mm with brick masonry constructed including necessary excavation and earth work in soft/loose soil, brick work, plastering, white wash, PCC coping, MS frame made out of angle iron of size 40mmx40mmx6 mm, MS sheet cover of 1.6 mm thick fixed to angle iron frame by means of hinges welded to frame and painting with 2 coats of synthetic enamel paint over a coat of red oxide primer on steel surfaces and grouting the frame in PCC 1:2:4 type B-1 including handle and locking arrangement with one number 50 mm dia brass pad lock , etc complete all as specified and directed by Enginner-in-Charge	5.00	Each Job	Excess(+)	1	Full Conversion	INR	0.00	0.00	INR Zero Only
23.00	Boring of holes under road, pavement, hard standing by trenchless technology using ultra sounding technique and necessary machine including HDPE pipe of 150 mm dia suitable for 0.4 mpa working pressure etc complete all as specified and directed by Enginner-in-Charge Note: Qty 85 RM, Boring of holes of 150mm dia pipe will be executed againt Srl item 30.00 of EXTERNAL ELECTRIFICATION	137.00	RM	Excess(+)	1	Full Conversion	INR	0.00	0.00	INR Zero Only
24.00	EXTERNAL ELECTRIFICATION Supply and installation of 100 KVA compact sub station with non extensible RMU consisting of 01 No. manually operated 11 KV, 630 Amps VCB, HT cable/ Bus bar, transformer 100 KVA, 11 KV/433V CRT dry type & associated LT devices (ACB/ MCCB/ Bus Bar/ Cable). All the main components like VCB, Transformer & LT Panel shall be of same make including foundation and smart meter as manufacturers specification consisting of following items & as per detailed technical specifications:	2.00	Each Job	Excess(+)	1	Full Conversion	INR	0.00	0.00	INR Zero Only
24.01	HV Section HT 12 KV, 3 phase 50 Hz totally metal clad withdraw able type vaccum circuit Breaker INCOMER CUM OUTGOER (ICOG) panel with Copper bus bar of suitable rating , horizontal isolation type VCB of capacity minimum 630 Amps rated current, as per IEC 62271-100-200. The switchgear panel shall be of sheet steel construction with ALUZINC not less than 2.5mm thickness for load bearing section and not less than 2 mm thickness for non - loaded bearing and shall be totally dust and vermin proof. The offered panels shall be tested for IAC level of 25kA/0.1 Sec. (A) Panel and VCB parameters are as below:- (i) Rated Voltage level/PF withstand voltage/Impulse level : 12KV/28kV/75 KVP. (ii) Continuous current rating: minimum 630A. (iii) Short circuit withstand current : minimum 25 KA for 3 sec. (iv) One No minimum 630 Amps horizontal draw out type vaccum circuit breaker in 12 KV metal clad floor mouting panel complete with following :-
24.02	(a) Manually and motor operated (230V,AC,50Hz) spring charged type, manually and electrically open (electrical - 110VDC ) operation type, incorporating mechanical as well as electrical ON/OFF indication "OFF" push button, test/service position limit switches, with minimum 6NO+6NC breaker auxiliary contact in service position. (b) manual Charging of breaker should be done without opening the front door. (c) Cast resin current transformer 11KV,50-25/5,core1: class 1.0,15VA for 3 phase, core2 : 5P10,15VA. (d) Cast resin potential transformer 11KV/V3/110V/V3/110V/3, 50 VA, CI 1.0,CI 3P and HT Fuse at the primary end and 04 pole MCB at the secondary end of the PT (Confirming related IS specification). (B) Protection arrangements for the breaker shall comprise of the follwing : (i) U/V.O/V,E/F,O/C, S/C with modbus protecol and drawout type- Numerical Type Siemens (Siprotec)/ABB(REF series)/ Schneider (MICOM P 122) (ii) Auxillary transformer protection
24.03	(iii) 8 window Annunciator SI800 model (iv) Power pack with 7 AH Battery along with battery charger for 24 V DC circuit. (C) The following meters, indications and accessories are to be provided with the panel : (i) Digital Volmeter range 0-12KV with necessary volmeter with built in selector switch & suitable for 110V AC 96x96 sq mm dia with shrouded terminal. (ii) Digital Ammeter range of applicable range with necessary ameter with built in selector switch dual graduated scale 96x96 sq mm dia with shrouded terminal. (iii) Multi-function meter (6400NG/equvalent) (iv) Necessary DC supply, healthy indication lamp & switch. (v) Control : (a) TNC (Trip, Neutral & Close) breaker control switch with indicating arrangement, (b) Local/Remote selector switch for breaker open/close operations. Transformer Section Transformer 100 KVA, 11/0.433KV, 50 Hz, step down, outdoor type, ONAN Cooled oil immersed copper wound energy efficient transformer, complete with first filling of IS-335 ISI marked filtered & dehyrated tranformer oil and other standard fittings/acceesories and 7 position OFF load circuit tap changer (Tapping range + 7.5% in steps of 2.5% Each) with vector group Dyn-11, with provision of making connection of incomming HT cable and outgoing LT cable Busbar all as per IS 1180-2014 (Level-2) as per Latest IS and complet with and including all required accessories for installation of transformer all as specified and directed.
24.04	The transformer shall comprises following: (i) 03 Nos porcelain bushings with copper rod on HV side. (ii) 04 Nos bushing on LV Side. (iii) Oil level guage,oil drain filter valve,lifting hucks,oil filling hole with cap/plug with connection plate, Air release valve plug complete. (iv) 01 Nos 150mm dia, oil temperature indicator with A&T contacts,vapour pressure type having range 0-120 degree with metal guard. (v) 01 Nos 150mm dia, winding temperature indicator with A&T contacts,vapour pressure type having range 0-120 degree with metal guard.
24.05	(vi) 02 Nos earthing terminals on tank cover to facilitate fixing of 50x6mm GI earth strip for earthing of body including rating plate and terminal marking plate. All date shall me marked on Rating plate. (vii)First fill of unused and new transformer oil,IS-335 Marked filtered and tested upto 60KV die electric strngth at 2.5 mm air gap between testing electrode. LV Section INCOMING- (a) ACB 4 pole 1000 Amp, 50 KA with microprocessor based with O/L, S/C & Earth Fault Protection. INDICATING PANEL- (a) Digital multi-functional meter which shows PF, Volts, Amps etc complete. (b) Aluminium bus bars of suitable capacity, fixed on insulators, coated with PVC sheeves with red, yellow, blue colour. (c) Phase indicating lamps each backed up with suitable MCB. OUTGOING- (a) MCCB 4 Pole 400 amps ,415 Volt of breaking capacity not less than 36 KA (Ics=100 % of Icu) with Adjustable Thermal & Magnetic Range (Optium 2.0) - 01 Nos (for Panel-B) (b) MCB TPN 16-25 amps, 10kA, 415 Volt, C series - 01 No(for Religious institute)
24.06	(c) MCCB 4 Pole 100 amps ,415 Volt of breaking capacity not less than 25 KA (Ics=100 % of Icu) with Adjustable Thermal setting (Optium 2.0) - 01 Nos (for Panel-C). (d) LED Indicator lamp (R,Y,B) - Set of Three. (e) Digital Ammeter 0-400A with suitable ratio of CTs – 01 No. (f) Digital Volt meter 0-500 Volts – 01 No. APFC Panel Automatic APFC Capacitor bank panel of 100 KVAR. Automatic switching "ON" & "OFF" control panel with dust and vermin proof hinged and lockable door complete with interconnection, bonding to earth (suitable for 400/440 volts, 3 phase 50 Hz supply system). Having Automatic switching with microprocessor based relay ON" & "OFF" control panel for 100 KVAR capacitor in and including fixing Danger plate on both side, interconnection with LT panel with appropriate size of electric cable. Panel consists of following:-
24.07	Capacitor Bank:- 25A MCB TP suitable for 12.5 KVAR- 2 Nos 63A MCB TP suitable for 25 KVAR-1 No 100A MCCB TP suitable for 50 KVAR-3Nos Capacitive duly contactors- Capacitive-duly contactors suitable for 12.5 KVAR-2Nos Capacitive-duly contactors suitable for 25 KVAR-1No Capacitive-duly contactors suitable for 50 KVAR-3Nos Heavy duty capacitor cylindrical 440V- 12.5 KVAR APP tecnology capacitor bank-2Nos 25 KVAR APP tecnology capacitor bank-1No 50 KVAR APP tecnology capacitor bank-3Nos 6 Sets of illuminated push button stations "RED" & "GREEN" push buttons for manual operation of capacitors. 1 No selector switches for changing automatic to manual operation of capacitors .
24.08	Enclosure Section Outdoor type enclosure having construction of Galvanised Sheet Steel with combination of 1.5/2mm thickness with 4mm HRCA base frame.The Enclosure shall have IP54 degree of protection for HT & LT switchgear compartment & IP23 degree of protection for Transformer compartment. The enclosure shall be PU painted/Powder Coated. Each compartment will be provided with the door and pad locking arrangement. The Compartment illumination lamp with door operated switch shall be provided for each compartment. -01Job Note : (i) Drawing of CSS shall be approved by GE before placing order by the contractor. (ii) All types of spares such as gland, switchgears etc & others items if required shall be included in over all cost quoted.
25.00	Supply, install, test and commission LT panel board indoor type CPRI approved, 3 phase, 4 wire, 415 volts with 100 Amps Aluminium bus bar, digital type with inbuilt selector switch and suitable CTs, indicator lamps, outdoor cubical type, IP 54, dust and vermin proof fabricated out of CRCA sheet not less than 2 mm thick fixed on angle iron frame of size 50x50x6mm duly powder coated, front openable double door hinged with locking arrangements complete with and comprising the following including necessary PCC platform of suitable size with following accessories :-	1.00	Each Job	Excess(+)	1	Full Conversion	INR	0.00	0.00	INR Zero Only
25.01	INCOMING:- (a) Aluminium bus bar capacity 100 Amps for Phase-R-Y-B- & neutral (b) MCCB FP 100 Amps 36 KA, 415 Volt & 50hZ- 1 No (I/C) OUTGOING :- (a) MCB DP 10 Amps 10 KA 'C' series - 02 No (For Raw Sewage Pump Submersible Pump & Anoxic Mixer) (b) MCCB FP 25 KA 63 Amps - 1 No for Air Blower (c) MCB DP 6 Amps 10 KA 'C' series - 02 No (Sludge Recirculation Pump (SP 1HM) & Chlorine Dosing Pump) (d) MCCB FP 25 KA 20 Amps - 1 No (For Filter Feed Pump (KDS-837)) (e) MCB DP 16 Amps 10 KA 'C' series - 02 No (for Backwash Pump for DMF & Backwash Pump for ACF) (f) MCB DP 6 Amps 10 KA 'C' series - 02 No (for DWPE Dosing Pump & Monoblock pump set) (g) MCB DP 20 Amps 10 KA 'C' series - 01 No (For Treated water pump) (h) MCCB FP 25 KA 16 Amps - 1 No for Building & street lights (j) Digital ammeter 0-400 Amps of size 96x96 sq mm with selector switch complete with suitable size CTs- 1 No. (k) Digital voltmeter of size 96x96 sq mm with selector switch complete with suitable size CT's - 1 No.
25.02	(l) LED indicator lamp R,Y,B (1set of three) (m) Nature switch for automatic switching of street light based on LUX level of natural light of sensor (nature switch) along with suitable power contactors and MCB's (input-output) should be enclosed in panel/wall mountable enclosure made of rust proof, box confirming to IP-54 and it should be able to take Single Phase load of 01 KW
26.00	Supply and fix , testing , commissioning of LT weather proof panel board powder coated outdoor type double door shutter, made out of CRCA 3.15 mm thick outer and 1.6 mm thick for inner door confirming to IS 8623 with angle iron 50x50x6 mm outdoor, floor mounting type with closed bus bar , chamber and with aluminium bus bar with necessary insulators suitable for 3 phase, 4 wire 50 Hz AC supply as per CPRI approved including provn of digital Am-meter, digital Volt-meter, CT's of suitable ratio,indicator lamps R-Y-B, selector switches and internal wiring including making	1.00	Each Job	Excess(+)	1	Full Conversion	INR	0.00	0.00	INR Zero Only
26.01	PCC block type 0.6 Mtr above ground level grouting etc all as specified and directed with the following work also includes provision of suitable size of cable glands, cable lugs, nut, bolts, washers etc . The bottom portion of enclosure shall be minimum 60 cm above ground level of legs of angle iron (Main Panel at STP) Incoming :- (a) Aluminium bus bar capacity 200 Amps for Phase-R-Y-B- & neutral (b) MCCB FP 200 Amps 36 KA, 415 Volt & 50hZ- 1 No (I/C) Outgoing :- (a) MCB DP 10 Amps 10 KA 'C' series - 02 No (For Raw Sewage Pump Submersible Pump & Anoxic Mixer)3 (b) MCCB FP 25 KA 125 Amps - 1 No for Air Blower (c) MCB DP 6 Amps 10 KA 'C' series - 02 No (Sludge Recirculation Pump (SP 1HM) & Chlorine Dosing Pump) (d) MCCB FP 25 KA 63 Amps - 1 No (For Filter Feed Pump (KDS-837) (e) MCB DP 16 Amps 10 KA 'C' series - 02 No (for Backwash Pump for DMF & Backwash Pump for ACF) (f) MCB DP 6 Amps 10 KA 'C' series - 02 No (for DWPE Dosing Pump & Monoblock pump set)
26.02	(g) MCB DP 10 Amps 10 KA 'C' series - 01 No (For Treated water pump) (h) MCCB FP 25 KA 16 Amps - 1 No for Building & street lights (i) MCCB FP 25 KA 16 Amps - 1 No for Sewage Pumping station (j) Digital ammeter 0-400 Amps of size 96x96 sq mm with selector switch complete with suitable size CTs- 1 No. (k) Digital voltmeter of size 96x96 sq mm with selector switch complete with suitable size CT's - 1 No. (l) LED indicator lamp R,Y,B (1set of three) (m) Nature switch for automatic switching of street light based on LUX level of natural light of sensor (nature switch) along with suitable power contactors and MCB's (input-output) should be enclosed in panel/wall mountable enclosure made of rust proof, box confirming to IP-54 and it should be able to take Single Phase load of 01 KW
27.00	M&L for Non clog vertical submersible pumps with chrome steel impeller and cutter, non-clog to pass 40 mm size particles including Supply, installation with guide rail and lifting chain, cables, Earthing, testing complete with 2 years maintenance for 350LPM for 0.5 MLD STP @ 12 Mtr Head (or capacity to achive functionality of 0.5 MLD STP) power rating.etc complete all as specified and directed.	2.00	Each	Excess(+)	1	Full Conversion	INR	0.00	0.00	INR Zero Only
28.00	M&L for Non clog vertical submersible pumps with chrome steel impeller and cutter, non-clog to pass 40 mm size particles including Supply, installation with guide rail and lifting chain, cables, Earthing, testing complete with 2 years maintenance for 700LPM for 1.0 MLD STP @ 12 Mtr Head ( or capacity to achive functionality of 1.0 MLD STP) power rating.etc complete all as specified and directed.	2.00	Each	Excess(+)	1	Full Conversion	INR	0.00	0.00	INR Zero Only
29.00	Supply & fix sintex box of size 195 X 135 X 90 mm Cat No GS-JB-2014 Hinged (L) wiith 2 way terminal mounted on epoxy nsulators for looping of cable for 1Phase and 1neutral fixed on pole with the help of MS nuts bolts and MS clamps-2 Nos of size 40 mm X 4 mm thick with one No MCB SP 6 Amp capacity ounted on din rail inside box. work also includes making suitable hole in pole to take out connections to fitting if required at site and provisioning of PVC insulated copper cable from junction box to conector of street light all as specified and directed.etc complete all as specified and directed by Enginner-in-Charge	24.00	Each	Excess(+)	1	Full Conversion	INR	0.00	0.00	INR Zero Only
30.00	Boring of holes under road, pavement, hard standing by trenchless technology using ultra sounding technique and necessary machine including HDPE pipe of 150 mm dia suitable for 0.4 mpa working pressure etc complete all as specified and directed by Enginner-in-Charge (Qty: 85 RM) Note: Boring of holes of 150mm dia pipe will be mesured and paid under Srl item 23.00 here in before.
31.00	Supply and erecting cable route marker for LT Cable made of precast RCC (1:2:4) using 20mm graded stone aggregate cast in pillar of size 15x10x60cm including reinforcement with 4 nos 10mm dia deframed bars of 55 cm length and link/strapps of 8mm dia bars at 150mm C/C and in fixing in ground level duly pained & written LT .433 KV including PCC & earth work etc complete all as per specified and directed.	20.00	Each	Excess(+)	1	Full Conversion	INR	0.00	0.00	INR Zero Only
32.00	Supply and erecting cable route marker for HT Cable made of precast RCC (1:2:4) using 20mm graded stone aggregate cast in pillar of size 15x15x60cm including reinforcement with 4 nos 10mm dia deframed bars of 55 cm length and link/strapps of 8mm dia bars at 150mm C/C and in fixing in ground level duly pained & written HT 11 KV including PCC & earth work etc complete all as per specified and directed.	9.00	Each	Excess(+)	1	Full Conversion	INR	0.00	0.00	INR Zero Only
33.00	DG SETS Supply and install, testing and commissioning of diesel engine driven generating set with AMF PANEL panel 62.5 KVA or available nearby capacity with water cooled engine for 48 KW power generation RPM 1500, brushless frame with silencer and Canopy for sound less mode (sound level not exceeding level specified by central pollution control board) and all engine accessories such as self starter, alternator/dynamo and 48 kW/ 62.5 kVA electric alternator, 415 volts, 3 phase, 4 wire 50 Hz. Voltage Regulation 1 15, Insulation class H coupled to engine with suitable coupling and base frame on foundation as recommended by the manufacturer and consisting of other electrical components, fuel tank of capacity of not lesss than for 12 hour run with level indicator installed on suitable steel frame with PCC foundation as per manufacturers instructions, Power Command genset Controller, fuel pipes, Dual spin on fuel filter, Dry type Aircleaner, Shutt off coil with safeties for LLOP/HWT fuel pipes meter, hour meter, oil temperature gauges, ammater, ignition switch, radiator with cooling fan, maintanance free battery 12V/1x120 AH, including suitable size of copper cable leads with terminals, all mountings accessories and necessary foundation and AVM pads complete as per manufacurers recommendations and to the satisfaction of Engr in charge. Engine as per IS:10001/ 10002 and alternator as per IS: 13364	1.00	Each Job	Excess(+)	1	Full Conversion	INR	0.00	0.00	INR Zero Only
33.01	(A) PRIME MOVER:- Suitable for driving 48 KW/62.5 KVA alternator water cooled battery start diesel Engine of suitable capacity confirming of ISO 10000 / BS 5514 BSS 649 and fuel tank suitable for 12 hrs running capacity mounted on MS frame pedestal supported with anti-vibration mounting rated for continuous running capable of taking 10% over load tone hr in any 12 hrs operaton complete with the following standard accessories:- (a) Engine mounted Instrument Panel fitted with and having digital display for following:- (i) Start-stop switch with key (ii) Water temperature indication (iii) Lubrication oil pressure indication (iv) Lubrication oil temperature indication (v) Battery charging indication
33.02	(vi) RPM indication (vii) Over speed indication (viii) Low lub. Oil trip indication (ix) Engine Hours indication (B) ALTERNATOR: 48 KW/60 KVA at 0.8 PF Brushless self excited, self regulaed 3 phase 50 Hz 415 V 1500 RPM 4 wire screen protected drip proof free from simulation problems brushless continuous rating confirming to BS 5000 complete with automatic voltage regulator output voltage regulated between +/- 1% or set voltage from no load to full load. The alternator shall be having sound proof enclosure, self excited, self regulated through AVR confirming to IS: 4722/BS 2613 suitable for tropical conditions with class H insulation (C) ACOUSTIC ENCLOSURE: Floor mounted totally enclosed acoustic enclosure of suitable size as per CPCB norms duly epoxy painted, installed as PCC 1:2:4, type B-2 platform 300mm above GL according to size of generartor. It shoud be made out of min 2mm thick CRCA sheet gasket of door should be of high quality one door shall have glass window for control panel. Sound level of acoustic enclosure shall not more than 75 db measured 1.00m away from DG set canopy panel and doors shall have inside of fire retardant foam conforming to IS-81283/BS-4735. Lockable fuel filling arrangement to be provided externally to the canopy. Note: The engine and alternator of DG set suitable be derated to suit the climate condition of so as to give desired output including 10% over load for continuous one hour operation.
33.03	(D) AUTOMATIC MAINS FAILURE PANEL :- AMF panel for 48 KW/60 KVA DG Set fabricated out of sheet steel factory made suitable for floor mounting/fitted with cabinet hinged from panel for easy asessibility with suitable rated bus bar internal wiring and with provision for connecting incomming/outgoing leads with the folowing accessories :- a) Incoming and outgoing MCCB of rated capacity 4 pole - (02 Nos-). b) Auxillary contractors of rated capacity - 02 Nos c) Digital controler with microprocessor based fully configurable control Unit having 4 line LCD display. The unique integrated DG set controller, Incorporate both engine and alternator parameter in one console, Fully configurable digital out put, All parameter are settable and password protected, Displaying i) Engine Oil pressure Coolant temperature ii)Coolant temperature iii) Fuel level indication % iv) Battery voltage (v) Engine rpm vi) DG set Running Hours vii) Generator Volts-Phase-Neutral & Phase-Phase
33.04	viii) Generator Current (Amps) ix) Power factor x) KWHR xi) KW d) Alarm/Hooter e) Bty charger connected to main supply side to charge bly comprising the following :- f) DC ammeter & voltmeter digital type g) Charge rate selection for tricle or high charge h) Indicator lamp for bly j) Set for easily accessible control fuses k) Set for relays to auto-start the engine on main failure and low voltage. l) Emergency trip Note: (i) any fittings/fixtures which are necessary for proper functioning of the DG set shall also be deemed include in the unit rate quoted and shall be provided by the contractor without any extra cost. ii) Necessary foundation for installation of DG set shall be provided as per manufaturers recommendations and cost deemed to be inclusive in the rate quoted for this item. iii) All testing equipments are to be arranged by the contractor and testing shall be carried out by the contractor in presence of Engr-in-Charge and testing result duly signed by the Engr-in-charge and the contractor shall be kept in Record. iv) Rate quoted by the contractor including the rate of first filling of lubricating oil, Coolent. (v) Drawings/cataloge for DG Set and AMF panel got approved by the GE before ordering to the manufacturer
33.05	ii) Necessary foundation for installation of DG set shall be provided as per manufaturers recommendations and cost deemed to be inclusive in the rate quoted for this item. iii) All testing equipments are to be arranged by the contractor and testing shall be carried out by the contractor in presence of Engr-in-Charge and testing result duly signed by the Engr-in-charge and the contractor shall be kept in Record. iv) Rate quoted by the contractor including the rate of first filling of lubricating oil, Coolent. (v) Drawings/cataloge for DG Set and AMF panel got approved by the GE before ordering to the manufacturer
33.06	Supply and install, testing and commissioning of diesel engine driven generating set with AMF PANEL panel 100 KVA with water cooled engine for 80 KW power generation RPM 1500, brushless frame with silencer and Canopy for sound less mode (sound level not exceeding level specified by central pollution control board) and all engine accessories such as self starter, alternator/dynamo and 80 kW/ 100 kVA electric alternator, 415 volts, 3 phase, 4 wire 50 Hz. Voltage Regulation 1 15, Insulation class H coupled to engine with suitable coupling and base frame on foundation as recommended by the manufacturer and consisting of other electrical components, fuel tank of capacity of not lesss than for 12 hour run with level indicator installed on suitable steel frame with PCC foundation as per	1.00	Each Job	Excess(+)	1	Full Conversion	INR	0.00	0.00	INR Zero Only
33.07	manufacturers instructions, Power Command genset Controller, fuel pipes, Dual spin on fuel filter, Dry type Aircleaner, Shutt off coil with safeties for LLOP/HWT fuel pipes meter, hour meter, oil temperature gauges, ammater, ignition switch, radiator with cooling fan, maintanance free battery 12V/1x120 AH, including suitable size of copper cable leads with terminals, all mountings accessories and necessary foundation and AVM pads complete as per manufacurers recommendations and to the satisfaction of Engr in charge. Engine as per IS:10001/ 10002 and Alternator as per IS: 13364 (A) PRIME MOVER:- Suitable for driving 80 KW/100 KVA alternator water cooled battery start diesel Engine of suitable capacity confirming of ISO 10000 / BS 5514 BSS 649 and fuel tank suitable for 12 hrs running capacity mounted on MS frame pedestal supported with anti-vibration mounting rated for continuous running capable of
33.08	taking 10% over load tone hr in any 12 hrs operaton complete with the following standard accessories:- (a) Engine mounted Instrument Panel fitted with and having digital display for following:- (i) Start-stop switch with key (ii) Water temperature indication (iii) Lubrication oil pressure indication (iv) Lubrication oil temperature indication (v) Battery charging indication (vi) RPM indication (vii) Over speed indication (viii) Low lub. Oil trip indication (ix) Engine Hours indication (B) ALTERNATOR: 80 KW/100 KVA at 0.8 PF Brushless self excited, self regulaed 3 phase 50 Hz 415 V 1500 RPM 4 wire screen protected drip proof free from simulation problems brushless continuous rating confirming to BS 5000 complete with automatic voltage regulator output voltage regulated between +/- 1% or set voltage from no load to full load. The alternator shall be having sound proof enclosure, self excited, self regulated through AVR confirming to IS: 4722/BS 2613 suitable for tropical conditions with class H insulation
33.09	C) ACOUSTIC ENCLOSURE: Floor mounted totally enclosed acoustic enclosure of suitable size as per CPCB norms duly epoxy painted, installed as PCC 1:2:4, type B-2 platform 300mm above GL according to size of generartor. It shoud be made out of min 2mm thick CRCA sheet gasket of door should be of high quality one door shall have glass window for control panel. Sound level of acoustic enclosure shall not more than 75 db measured 1.00m away from DG set canopy panel and doors shall have inside of fire retardant foam conforming to IS-81283/BS-4735. Lockable fuel filling arrangement to be provided externally to the canopy. Note: The engine and alternator of DG set suitable be derated to suit the climate condition of so as to give desired output including 10% over load for continuous one hour operation.
33.10	(D) AUTOMATIC MAINS FAILURE PANEL :- AMF panel for 80 KW/100 KVA DG Set fabricated out of sheet steel factory made suitable for floor mounting/fitted with cabinet hinged from panel for easy asessibility with suitable rated bus bar internal wiring and with provision for connecting incomming/outgoing leads with the folowing accessories :- a) Incoming and outgoing MCCB of rated capacity 4 pole - (02 Nos-). b) Auxillary contractors of rated capacity - 02 Nos c) Digital controler with microprocessor based fully configurable control Unit having 4 line LCD display. The unique integrated DG set controller, Incorporate both engine and alternator parameter in one console, Fully configurable digital out put, All parameter are settable and password protected, Displaying i) Engine Oil pressure Coolant temperature ii)Coolant temperature iii) Fuel level indication % iv) Battery voltage (v) Engine rpm vi) DG set Running Hours
33.11	(vii) Generator Volts-Phase-Neutral & Phase-Phase viii) Generator Current (Amps) ix) Power factor x) KWHR xi) KW d) Alarm/Hooter e) Bty charger connected to main supply side to charge bly comprising the following :- f) DC ammeter & voltmeter digital type g) Charge rate selection for tricle or high charge h) Indicator lamp for bly j) Set for easily accessible control fuses k) Set for relays to auto-start the engine on main failure and low voltage. l) Emergency trip Note: (i) any fittings/fixtures which are necessary for proper functioning of the DG set shall also be deemed include in the unit rate quoted and shall be provided by the contractor without any extra cost.
33.12	ii) Necessary foundation for installation of DG set shall be provided as per manufaturers recommendations and cost deemed to be inclusive in the rate quoted for this item. iii) All testing equipments are to be arranged by the contractor and testing shall be carried out by the contractor in presence of Engr-in-Charge and testing result duly signed by the Engr-in-charge and the contractor shall be kept in Record. iv) Rate quoted by the contractor including the rate of first filling of lubricating oil, Coolent. (v) Drawings/cataloge for DG Set and AMF panel got approved by the GE before ordering to the manufacturer
34.00	UTILISATION OF TREATED WATER M&L for brick masonary valve pit of size 1.20 x 1.20 x 1.20 Mtr (internal size of chamber) depth of chamber to be reckoned from top of PCC in foundation to top of MS cover as 1.20 Mtr and including 3.15mm thick MS plain black sheet cover with frame of angle iron 40mm x 40mm x 6mm with fixing arrangement such as hinges and locking arrangement, painting two coat of synethetic enamel paint over a coat of red oxide primer on MS cover and frame inlcuding necessary excavation and earth work in any type of soil, returning, filling in approved soil and disposal of surplus soil to a distance not exc. 50 mtr, 150 mm thick PCC (1:4:8) type D-2 using 40 mm graded stone aggregate as in foundation, brick work in cement motor (1:6), 15 mm thick plastering in cement mortoar (1:4) (both internal and external), 100 mm thick PCC (1:2:4) type B1 using 20 mm graded stone aggregate as in flooring etc complete all as specified and as directed.	8.00	Each	Excess(+)	1	Full Conversion	INR	0.00	0.00	INR Zero Only
35.00	M&L for brick masonary valve pit of size 0.90 x 0.90 x 1.20 Mtr (internal size of chamber) depth of chamber to be reckoned from top of PCC in foundation to top of MS cover as 1.20 Mtr and including 3.15mm thick MS plain black sheet cover with frame of angle iron 40mm x 40mm x 6mm with fixing arrangement such as hinges and locking arrangement, painting two coat of synethetic enamel paint over a coat of red oxide primer on MS cover and frame inlcuding necessary excavation and earth work in any type of soil, returning, filling in approved soil and disposal of surplus soil to a distance not exc. 50 mtr, 150 mm thick PCC (1:4:8) type D-2 using 40 mm graded stone aggregate as in foundation, brick work in cement motor (1:6), 15 mm thick plastering in cement mortoar (1:4) (both internal and external), 100 mm thick PCC (1:2:4) type B1 using 20 mm graded stone aggregate as in flooring etc complete all as specified and as directed.	8.00	Each	Excess(+)	1	Full Conversion	INR	0.00	0.00	INR Zero Only
36.00	Supply, Laying, jointing & testing of Ductile Iron (DI) of size 100mm dia, pressure pipeswith spigot and socket ends, centrifugally cast, class K-7, with cement mortar lining in inner side as per IS:8329-2000 (Latest revision) and other relevant standards and metallic zinc coating followed by a finishing layer of epoxy paint in outer side, suitable for push on joint (rubber gasket joint) in any length with inside cement mortar lining laid in trenches complete all as specified and as directed.	1120.00	RM	Excess(+)	1	Full Conversion	INR	0.00	0.00	INR Zero Only
37.00	Supply, laying, joining & testing of class K-7 DI pipes of 250 MM bore dia with spigot and socket, suitable for push on rubber joint, with internal cement mortar lining and external zinc and black bitumen coasted pipes in any lengths conforming to IS: 8329-2000 including Gasket & Joints as per IS : 9523-2000 laid in trenches/ Road/ Ducts/ Footpaths/ on wall on floor at location, complete all as specified and directed. Note : DI fittings required shall be measured and paid separately in respective items.	1152.00	RM	Excess(+)	1	Full Conversion	INR	0.00	0.00	INR Zero Only
38.00	Supply, laying, joining & testing of class K-7 DI pipes of 200 MM bore dia with spigot and socket, suitable for push on rubber joint, with internal cement mortar lining and external zinc and black bitumen coasted pipes in any lengths conforming to IS: 8329-2000 including Gasket & Joints as per IS : 9523-2000 laid in trenches/ Road/ Ducts/ Footpaths/ on wall on floor at location, complete all as specified and directed. Note : DI fittings required shall be measured and paid separately in respective items.	1100.00	RM	Excess(+)	1	Full Conversion	INR	0.00	0.00	INR Zero Only
39.00	Supplying, installing, testing & commissioning of Hydro-Pneumatic system comprising of vertical type Pump with SS Impeller, SS Shaft along with motor, pressure gauge with isolation cock, Isolation valve, NRV on delivery line. Isolation valve, stainer (with by-pass) at suction, common suction and discharge header including common Base frame, one Pressure tank & one VFD Panel, complete factory fitted. The pump shall be suitable for 415±10% volts 3 phase AC supply,Capacity :2600 Lpm each Head@ 25 Power Rating : 03 HP etc complete all as specified and as directed. (1 No for Working + 1 No For Standby).	2.00	Each	Excess(+)	1	Full Conversion	INR	0.00	0.00	INR Zero Only
40.00	Cast Iron Air Valves with two air Outlets, 200 mm dia bore and fixing Up in cast iron water supply mains complete etc complete all as specified and as directed.	2.00	Each	Excess(+)	1	Full Conversion	INR	0.00	0.00	INR Zero Only
41.00	Cast Iron Air Valves with two air Outlets, 150 mm dia bore and fixing Up in cast iron water supply mains complete etc complete all as specified and as directed.	2.00	Each	Excess(+)	1	Full Conversion	INR	0.00	0.00	INR Zero Only
42.00	Cast Iron Air Valves with two air Outlets, 100 mm dia bore and fixing Up in cast iron water supply mains complete etc complete all as specified and as directed.	2.00	Each	Excess(+)	1	Full Conversion	INR	0.00	0.00	INR Zero Only
43.00	Supply, install, testing and Commissioning of manufacturer's factory assembled and tested electric driven centrifugal pump set of capable of delivering 500 LPM at 35 mtr head comprising of horizontal centrifugal pump CI body with impellers operating at 2900 RPM with electric motor not less than 10 HP complete with starter, suction and delivery size 80mmx65mm and mounted on common MS base frame and foundations of the pump sets including Pressure gauge, PCC foundations, MS bolts with nuts and anti-vibration pads. Make: - Kirloskar Make: - Kirloskar Brother or Equivalent of Mather & platt/ KSB.”	2.00	Each	Excess(+)	1	Full Conversion	INR	0.00	0.00	INR Zero Only
44.00	Supply, install, test and commissioning of Motor control Each panle, CPRI approved, 3 phase, 4 wire, 415 volts with 32 Amps Aluminium bus bar, digital type with inbuilt selector switch and suitable CTs, indicator lamps, outdoor cubical type, IP 54, dust and vermin proof fabricated out of CRCA shoet not less than 2.0 mm thick fixed on angle iron frame of size 50x50x6mm Panels shall be treated with all anti corrosive process before painting, duly powder coated. Cable gland plates shall be provided on top as well as at the bottom of the panels. front openable double door hinged with locking arrangements complete with and comprising the following including necessary PCC platform of suitable size. All as per details given as under: a) 4 Pole MCCB 16 Amp, 50 Hz, 415 V with rupturing ca+pacity 35 KA-01 Nos b) 3 Pole MCCB 16 Amp, 50 Hz. 415 V with rupturing capacity 25 KA-02 Nos c) Star delta Starter fully automatic suitable for 415 V AC For 3 HP Motor-02 Nos d)Voltmeter digital with selector switch-01 No, Ammeter degital with selector switch - 01 No, One set of indicator lamps 3 Nos LED Type, Single Phase Preventor-01 Nos	1.00	Each Set	Excess(+)	1	Full Conversion	INR	0.00	0.00	INR Zero Only
45.00	Supply, install, test and commissioning of Motor control Each panle, CPRI approved, 3 phase, 4 wire, 415 volts with 200 Amps Aluminium bus bar, digital type with inbuilt selector switch and suitable CTs, indicator lamps, outdoor cubical type, IP 54, dust and vermin proof fabricated out of CRCA shoet not less than 2.0 mm thick fixed on angle iron frame of size 50x50x6mm Panels shall be treated with all anti corrosive process before painting, duly powder coated. Cable gland plates shall be provided on top as well as at the bottom of the panels. front openable double door hinged with locking arrangements complete with and comprising the following including necessary PCC platform of suitable size. All as per details given as under: a) 4 Pole MCCB 63 Amp, 50 Hz, 415 V with rupturing capacity 35 KA-01 Nos	1.00	Each Set	Excess(+)	1	Full Conversion	INR	0.00	0.00	INR Zero Only
45.01	b)3 Pole MCCB 32 Amp, 50 Hz. 415 V with rupturing capacity 25 KA-02 Nos c)Star delta Starter fully automatic suitable for 415 V AC For 15.0 HP Motor-02 Nos d) Voltmeter digital with selector switch-01 No e) Ammeter degital with selector switch - 01 No f) One set of indicator lamps 3 Nos LED Type, Single Phase Preventor-01 Nos, MCB Single Pole 06-32 Amp-02 Nos, Contactor power terminal, Three pole power contactor of rating 6A - 32 Amp., Overload Relay of capacity 20-32A
46.00	STP &SPS, SHED FOR SCREW PRESS For item No. 46.00 to 78.00 :- Supply, installation, testing & commissioning of Sewage Treatment Plant based on principle of aerobic attached growth non clogging randomly Moving Bed Bio-reactor (MBBR) having capacity 0.5 MLD & 1 MLD, as per the specifications given in particular specification, excluding all civil work:-
47.00	Fine bar screen of SS construction as per given specifications, to prevent floating objects passing through it etc complete all as per manufactures specificitions: Number of unit : 1 No. Type : Fine Material of Construction : Stainless Steel – 316 Clear Spacing (mm) : 6 mm Size of Bar Screen : 300 x 800 mm	1.00	Each	Excess(+)	1	Full Conversion	INR	0.00	0.00	INR Zero Only
48.00	Fine bar screen of SS construction as per given specifications, to prevent floating objects passing through it etc complete all as per manufactures specificitions: Number of unit : 1 No. Type : Fine Material of Construction : Stainless Steel – 316 Clear Spacing (mm) : 6 mm Size of Bar Screen : 500 x 800 mm	1.00	Each	Excess(+)	1	Full Conversion	INR	0.00	0.00	INR Zero Only
49.00	Fine bar screen Mechanical cleaning of SS construction as per given specifications, to prevent floating objects passing through it etc complete all as per manufactures specificitions: Number of unit : 1 No. Type : Circular Wedge Wire Screens Material of Construction : Stainless Steel – 316 Clear Spacing (mm) : 10 mm Size of bar screen : To Fit in given size of chamber	2.00	Each	Excess(+)	1	Full Conversion	INR	0.00	0.00	INR Zero Only
50.00	Oil Skimmer for removal of Oil & Grease trap chamber etc complete all as per manufactures specificitions: Qty. : 01 No. Type : Slotted pipe / Belt type Capacity : 1500 LPH	2.00	Set	Excess(+)	1	Full Conversion	INR	0.00	0.00	INR Zero Only
51.00	One lot of air grid for equalization tank for providing aeration in the tank, etc complete all as per manufactures specificitions: Air Grid Type : Header & lateral MOC of Air Grid : uPVC Aeration air required : 133 m3/hr AIR ROTAMETER Type : Glass Tube Qty : 01 No. Note : Fine bubble diffuser and course bubble diffuser should be provided as per manufacturer recommendation and cost of the same shall be deemed to be included in rate quoted by contractor	1.00	Set	Excess(+)	1	Full Conversion	INR	0.00	0.00	INR Zero Only
52.00	One lot of air grid for equalization tank for providing aeration in the tank, as specified in PS Air Grid Type : Header & lateral MOC of Air Grid : uPVC Aeration air required : 177 m3/hr AIR ROTAMETER Type : Glass Tube Qty : 01 No. Note : Fine bubble diffuser and course bubble diffuser should be provided as per manufacturer recommendation and cost of the same shall be deemed to be included in rate quoted by contractor	1.00	Set	Excess(+)	1	Full Conversion	INR	0.00	0.00	INR Zero Only
53.00	Raw sewage centrifugal mono bloc pumps complete with motor and all necessary accessories and fittings, to be installed for transferring sewage from equalization tank to process reactor. Level sensor provided in the tank and interlinked with pumps for ON-OFF operation as per water level in the tank. One pressure gauge for each pump provided to measure pressure at the outlet. Qty. : 02 Nos. (1 Working + 1 Stand by) Flow : 21.0 m3/hr Power Rating : 03 HP Head : 12 m MOC : Cast Iron Type : Submersible Sewage Pump PRESSURE GAUGES Type : Bourdon’s tube Pressure sensing : By Diaphragm Diameter of Dial : 100 mm Qty : One for each pump Mounting : ½” NPT	2.00	Set	Excess(+)	1	Full Conversion	INR	0.00	0.00	INR Zero Only
54.00	Raw sewage centrifugal mono bloc pumps complete with motor and all necessary accessories and fittings, to be installed for transferring sewage from equalization tank to process reactor. Level sensor provided in the tank and interlinked with pumps for ON-OFF operation as per water level in the tank. One pressure gauge for each pump provided to measure pressure at the outlet. Qty. : 02 Nos. (1Working + 1Stand by) Flow : 41.70 m3/hr , Head : 12 m and Power Rating : 5.00 HP MOC : Cast Iron Type : Submersible Sewage Pump PRESSURE GAUGES Type : Bourdon’s tube Pressure sensing : By Diaphragm Diameter of Dial : 100 mm Qty : One for each pumpr Mounting : ½” NPT LEVEL CONTROL SWITCH Type : Displacer Contact rating : 5 Amp No. of contacts : 2 Qty : 1 no. in Raw sewage pump FLOW METER with TOTALISER Type : Inline Full Bore Electromagnetic Type Qty : 01 No. in main header	2.00	Set	Excess(+)	1	Full Conversion	INR	0.00	0.00	INR Zero Only
55.00	Twin Lobe Type type Air blower with motor in acoustic enclosure, for providing air in equalization tank, MBBR reactors & Sludge holding tank. One no. Air rotameter is to be provided in each line to MBBR reactor 1 & 2, equalisation tank, sludge holding tank for measurement of quantity of air. No. Of Air Blowers : 02 Nos. (1W + 1S) Type :Twin Lobe Drive :Direct Power Rating : 20 HP Capacity of each Blower : 580 m³/hr @ 6.0 m WC MOC : Cast Iron PRESSURE GAUGES Type : Glycerin Filled Pressure sensing : By Diaphragm Diameter of Dial : 100 mm Qty : One for each Blower Mounting : ½” NPT	2.00	Set	Excess(+)	1	Full Conversion	INR	0.00	0.00	INR Zero Only
56.00	Tri lobe Air blower with motor in acoustic enclosure, for providing air in equalization tank, MBBR reactors & Sludge holding tank. One no. Air rotameter is to be provided in each line to MBBR reactor 1 & 2, equalization tank, sludge holding tank for measurement of quantity of air. No. Of Air Blowers: 02 Nos. (1W + 1S) Type: Positive Displacement Drive: Belt Capacity of each Blower: 1110.0 m³/hr @ 6.0 m WC Power Rating: 32 HP minimum MOC: Cast Iron PRESSURE GAUGES Type: Glycerin Filled Pressure sensing: By Diaphragm Diameter of Dial: 100 mm Qty: One for each Blower Mounting : ½” NPT”	2.00	Set	Excess(+)	1	Full Conversion	INR	0.00	0.00	INR Zero Only
57.00	Anoxic submersible type Mixer. Mixer : 01 Mixer type : External Propeller Mixer Mixer MOC : MSEP Power Rating : 02 HP Dia of impeller : 220 mm Thrust : 115 N Each	2.00	Each Job	Excess(+)	1	Full Conversion	INR	0.00	0.00	INR Zero Only
58.00	Anoxic submersible type Mixer. Mixer : 01 Mixer type : External Propeller Mixer Mixer MOC : MSEP Dia of impeller : 220 mm Thrust : 115 N Each Power rating : 2 HP	2.00	Each Job	Excess(+)	1	Full Conversion	INR	0.00	0.00	INR Zero Only
59.00	MBBR internals comprising of media, SS air grid & SS rise pipe, media retaining sieves, etc. comprising the following:- Media Type : Cylindrical/ circular shaped Media -Wagon wheel design having externa lfins, surface area- 400 m2/m3, nontoxic Material of Construction : Virgin PP, hazy transparent white Media quantity total : 65.48 m3 Minimum Media Quantity : 19 m3 Riser Pipe : SS 304 ScH 20 Air Grid Type : Header & Lateral type Material of Construction : SS 316 AIR ROTAMETER Type : Glass Tube Qty : 02 Nos. Note : Fine bubble diffuser and course bubble diffuser should be provided as per manufacturer recommendation and cost of the same shall be deemed to be included in rate quoted by contractor	4.00	Set	Excess(+)	1	Full Conversion	INR	0.00	0.00	INR Zero Only
60.00	Sewage centrifugal monobloc self-priming recirculation pumps complete with motor and all necessary accessories and fittings for recirculation of biomass with sewage to the anoxic chamber. One pressure gauge for each pump has to be provided to measure pressure at the outlet. Qty : 2 Nos. (1W+1S) Capacity (Each) : 12.50 m3/hr Head : 8.0 m Power Rating : 01 HP MOC : Cast Iron Type : Sewage Self priming Centrifugal monobloc PRESSURE GAUGES Type : Bourdon’s. tube Pressure sensing : By Diaphragm Diameter of Dial : 100 mm Qty : One for each pump Mounting : ½” NPT	4.00	Lot	Excess(+)	1	Full Conversion	INR	0.00	0.00	INR Zero Only
61.00	Tube settler tank internals comprising of media & collection trough, material of construction- UV stablized Virigin PVC base. Type : Square tube PVC Qty : 01 No. Media straight height / media height at 60 degrees. : 1150 mm / 1000 mm MOC of Media : UV Stabilized Virgin PVC Base Shape of Media : Hexagonal (Chevron) Shape tube Qty of media : 10.96 m3 Tube Fitting : Tongue & Groove Thickness : 1.0mm (± 0.1mm) Color : Black Scrapper mechanism : Centrally driven Inlet Zone : MSEP Platform : MS Sludge Removal Process : Through Auto Desludge Valve Type of Over flow weirs : V Notch V Notch MOC : Mild steel epoxy painted	1.00	Each Set	Excess(+)	1	Full Conversion	INR	0.00	0.00	INR Zero Only
62.00	Tube settler tank internals comprising of media & collection trough, material of construction- UV stablized Virigin PVC base. Type : Square tube PVC Qty : 01 Nos. Media straight height / media height at 60 degrees. : 1150 mm / 1000 mm MOC of Media : UV Stabilized Virgin PVC Base Shape of Media : Hexagonal (Chevron) Shape tube Qty of media : 35 m3 Tube Fitting : Tongue & Groove Thickness : 1.0mm (± 0.1mm) Color : Black Scrapper mechanism : Centrally driven Inlet Zone : MSEP Platform : MS Sludge Removal Process : Through Auto Desludge Valve Type of Over flow weirs : V Notch V Notch MOC : Mild steel epoxy painted	1.00	Set	Excess(+)	1	Full Conversion	INR	0.00	0.00	INR Zero Only
63.00	Sludge Holding Tank air grid as specified. Air Grid Type : Header & lateral MOC of Air Grid : uPVC Aeration air required : 11.5 m3/hr AIR ROTAMETER Type : Glass Tube Qty : 01 No. Note : Fine bubble diffuser and course bubble diffuser should be provided as per manufacturer recommendation and cost of the same shall be deemed to be included in rate quoted by contractor	1.00	Each	Excess(+)	1	Full Conversion	INR	0.00	0.00	INR Zero Only
64.00	Sludge Holding Tank air grid as specified. Air Grid Type : Header & lateral MOC of Air Grid : uPVC Aeration air required : 24 m3/hr AIR ROTAMETER Type : Glass Tube Qty : 01 No. Note : Fine bubble diffuser and course bubble diffuser should be provided as per manufacturer recommendation and cost of the same shall be deemed to be included in rate quoted by contractor	1.00	Each	Excess(+)	1	Full Conversion	INR	0.00	0.00	INR Zero Only
65.00	Set of Sodium Hypo Chlorite dosing system comprising of 2 nos. dosing pump and one no. Solution tank, all as specified. Disinfectant : Free Chlorine Chlorine Dosage : 4-5 mg/ltr Qty. : 01 No. Hypo Solution tank capacity : 200 ltrs MOC : PVC Dosing pump capacity : 0 - 4 LPH Type : Electronic metering MOC of Pump : Power rating 0.5 HP Qty. : 02 Nos (1W+1S)	1.00	Set	Excess(+)	1	Full Conversion	INR	0.00	0.00	INR Zero Only
66.00	Set of Sodium Hypo Chlorite dosing system comprising of 2 nos. dosing pump and one no. Solution tank, all as specified. Disinfectant : Free Chlorine Chlorine Dosage : 4-5 mg/ltr Qty. : 01 No. Hypo Solution tank capacity : 200 ltrs MOC : PVC Dosing pump capacity : 0 - 6 LPH Type : Electronic metering MOC of Pump : PP Power Rating : 0.75 HP Qty. : 02 Nos (1W+1S)	1.00	Set	Excess(+)	1	Full Conversion	INR	0.00	0.00	INR Zero Only
67.00	Filter feed centrifugal monobloc pumps complete with motor and all necessary accessories and fittings for feeding tertiary unit, Level sensor should be provided in the chlorine contact cum filter feed tank and interlinked with pumps for ON-OFF operation as per level in the sump. Qty : 02 Nos. (1W+1S) Capacity (Each) : 21.74 m3/hr,Head : 26 m,Power Rating : 03 HP MOC : Cast Iron Type : Centrifugal monobloc PRESSURE GAUGES Type : Bourdon’s. tube Pressure sensing : By Diaphragm Diameter of Dial : 100 mm Qty : One for each pump Mounting : ½” NPT LEVEL CONTROL SWITCH Type : Floaty Contact rating : 5 Amp No. of contacts : 2 Qty : 1 no. for each set of pump FLOW METER with TOTALISER Type : Inline Full Bore Electromagnetic Type Qty : 01 No. in main header	2.00	Each	Excess(+)	1	Full Conversion	INR	0.00	0.00	INR Zero Only
68.00	Filter feed centrifugal monobloc pumps complete with motor and all necessary accessories and fittings for feeding tertiary unit, Level sensor should be provided in the chlorine contact cum filter feed tank and interlinked with pumps for ON-OFF operation as per level in the sump. Qty : 02 Nos. (1W+1S) Capacity (Each) : 43.48 m3/hr, Head : 26 m Power Rating : 7.50 HP MOC : Cast Iron Type : Centrifugal monobloc PRESSURE GAUGES Type : Bourdon’s. tube Pressure sensing : By Diaphragm Diameter of Dial : 100 mm Qty : One for each pump Mounting : ½” NPT LEVEL CONTROL SWITCH Type : Floaty Contact rating : 5 Amp No. of contacts : 2 Qty : 1 no. for each set of pump FLOW METER with TOTALISER Type : Inline Full Bore Electromagnetic Type Qty : 01 No. in main header	2.00	Each	Excess(+)	1	Full Conversion	INR	0.00	0.00	INR Zero Only
69.00	Dual Media filter, complete with media, frontal piping, valve and pressure gauges to measure pressure across the filter. Diameter of Filter : 1500 mm Height : 1800 mm Material of Construction : Mild Steel bituminous paint inside Thickness of Sheet : 6 mm shell / 8 mm dish Finishing : Bituminous paint inside / Epoxy Outside Filter media Anthracite 0.6 - 0.8 mm : 300 mm Filtering Sand 16/32 : 300 mm Crushed Gravel 6-2 mm : 100 mm Pebbles 10 -3 mm : 100 mm Pebbles 12-6 mm : 100 mm Pebbles 40-25 mm : 100 mm	2.00	Set	Excess(+)	1	Full Conversion	INR	0.00	0.00	INR Zero Only
70.00	Dual Media filter, complete with media, frontal piping, valve and pressure gauges to measure pressure across the filter. Diameter of filter- 2000 mm, Height- 1600 mm, Material of construction- Mild steel, Thickness of sheet- 6 mm (shell) and 8 mm (dish), with bituminous paint inside and epoxy paint outside. Diameter of Filter : 2000 mm Height : 1600 mm Material of Construction : Mild Steel bituminous paint inside Thickness of Sheet : 8 mm shell / 10 mm dish Finishing : Bituminous paint inside / Epoxy Outside Filter media Anthracite 0.6 - 0.8 mm : 300 mm Filtering Sand 16/32 : 500 mm Crushed Gravel 6-2 mm : 100 mm Pebbles 10 -3 mm : 100 mm Pebbles 12-6 mm : 100 mm Pebbles 40-25 mm : 100 mm	2.00	Set	Excess(+)	1	Full Conversion	INR	0.00	0.00	INR Zero Only
71.00	Activated Carbon Filter of complete with media, frontal piping, valve and pressure gauges to measure pressure across the filter. Diameter of Filter : 1600 mm Height : 1800 mm Material of Construction : Mild Steel Thickness of Sheet : 8 mm shell / 10 mm dish Finishing : Bituminous paint inside / Epoxy Outside Filter media Activated Carbon : 900 mm Coarse Sand 6-12 mm : 75 mm Pebbles 6-4 mm : 75 mm Pebbles 12-6 mm : 75 mm Pebbles 20-12 mm : 75 mm	2.00	Set	Excess(+)	1	Full Conversion	INR	0.00	0.00	INR Zero Only
72.00	Activated Carbon Filter of complete with media, frontal piping, valve and pressure gauges to measure pressure across the filter. Diameter of Filter : 2200 mm Height : 1800 mm Material of Construction : Mild Steel Thickness of Sheet : 8 mm shell / 10 mm dish Finishing : Bituminous paint inside / Epoxy Outside Filter media Activated Carbon : 900 mm Coarse Sand 6-12 mm : 75 mm Pebbles 6-4 mm : 75 mm Pebbles 12-6 mm : 75 mm Pebbles 20-12 mm : 75 mm	2.00	Set	Excess(+)	1	Full Conversion	INR	0.00	0.00	INR Zero Only
73.00	Electromagnetic flow meter with inline full bore electormagnetic type havong bi-directional flow and tolallisation facitlity etc complete all as specified and directed.	2.00	Each	Excess(+)	1	Full Conversion	INR	0.00	0.00	INR Zero Only
74.00	Set of multiple parameters analyser for BOD / TSS / COD / pH with sampling pump, having reagent and chemical s batch type having online auto zero calibration for COD/BOD/TSS with offset correction as specified in PS, complete with software and PC & printer, with remote display and data logging for raw sewage & Treated sewage both. BOD / TSS / COD / pH: Multi- Parameter Analyzer with sampling pump Method: COD/BOD/TSS: UV-VIS absorption dual beam spectrophotometry at 190~750nm, pH: Potentiometric with combination pH sensor Calibration: Online auto zero calibration for COD/BOD/TSS with OFFSET correction, Manual SPAN calibration for COD/BOD/TSS/pH (in- place) Operation cycle: Continuous or batch type Cleaning: Automatic built-in cleaning function. User programmable Operation: Reagent and chemical free analysis	2.00	Each	Excess(+)	1	Full Conversion	INR	0.00	0.00	INR Zero Only
74.01	Compensation: Auto turbidity and colour compensation Interference: Independent of flow and pressure variations Type : Advanced microprocessor-based system Accuracy : COD/BOD/SS: ± 5% - 10% of F.S. pH : ±0.1 pH. Display type : Touch screen, alpha numeric display 240 x 128 pixels LCD with backlit Response time : Within 10 Sec Measuring cycle : Programmable / normally 3-5 minutes Analog output : 0/ 4-20 mA. DC, isolated Enclosure protection : Comply to IP54 Relay outputs : Dry contact alarms for high and high-high set points, monitor failure, microprocessor failure Power supply : 110- 230V AC,50Hz, 30 VA Digital output : RS 232/ RS 485 Ambient temperature : 0 to 50 Deg. C PC configuration : CPU: INTEL I3, HDD: 500GB SATA, RAM: 4 GB DDR3 RAM, PORTS: USB STANDARD, 1 LAN, MONITOR: TFT LED- 18.5"(COLOR) - DOS
75.00	Set of Chlorine analyser for monitoring of residual chlorine having resolution 0.01 mg/l, respond time 60 seconds, micro processor based program as specified in PS. Qty : 01 Set Resolution : 0.01 mg/l Accuracy : ≤ 2% of Full Scale Response Time : T90 in 60 Sec Temperature operating : ‐5 to +70 ºC Sensor Measuring electrode Type : Amperometric type (potentiometric free chlorine sensor) Sensor Electrode Material : Shaft: Glass, Electrode‐Gold, Reference electrode‐ Ag / Tepox gel, Diaphragm‐Ceramics, Gasket‐ EPDM Sensor Automatic cleaning : ASR ‐ Automatic Sensor Cleaning System Transmitter type : Microprocessor based programmable Display : backlit LCD graphic 128x64 pixels Analog output : 3 x 4 to 20mA, max. 400 ohm all galvanically isolated Enclosure MOC & protection class : Die cast aluminium &IP66/ NEMA4X	2.00	Each	Excess(+)	1	Full Conversion	INR	0.00	0.00	INR Zero Only
76.00	One lot of suitable size Piping & manual valves of suitable material as follows:- Piping: MS'C' Class wherever exposed & SS wherever submersed. Valve:- Cast Iron to interconnect various units of sewage treatment plant, as per approved drawings.	2.00	Lot	Excess(+)	1	Full Conversion	INR	0.00	0.00	INR Zero Only
77.00	One lot of stairs, platform, railing, etc. complete all as specified and directed.	2.00	Each Job	Excess(+)	1	Full Conversion	INR	0.00	0.00	INR Zero Only
78.00	S&F set of potassium permanganate dosing system 2 Nos dosing pump and 01 no solution tank all as specified and directed:- Disinfectant : Potassium Permanganate Potassium Dosage : 4-5 mg/Ltr Process of Dosing : Electronic metering dosing pump No of dosing pump : 02 Nos Capacity : 0-6 LPH Each Solution tank : 01 No Solution tank capacity: 200 Ltr Solution tank MOC : PVC	2.00	Each	Excess(+)	1	Full Conversion	INR	0.00	0.00	INR Zero Only
79.00	SEWAGE PRESSURE PIPE LINE, PUMPS AND SCADA SYSTEM Supply, Installation Testing & Commissioning of Indoor type PLC (Programmable Logic Controller) based STP Automation, Protection Panel with Wireless Radio Frequency based communication, suitable for control and monitoring of complete STP including all pumps as per level and standby alternate operation, 02 Nos. Blowers, all outlet motorized butterfly valves, pressure transmitter in pump outlet header, 01 Nos Ultrasonic sensor (To be installed at Raw Sewage Well). The panel should be of minimum size 1000 X 950 X 300 mm front opening type, fabricated from 2.00 mm thick CRCA Sheet & mounting channel 40x40x5mm made out of Angle iron with proper ferrule & cable gland, internal wiring with PVC insulated multistranded copper conductor FRLS cable of adequate size.	2.00	Each	Excess(+)	1	Full Conversion	INR	0.00	0.00	INR Zero Only
79.01	A)The Panel should comprise the following items:- (i) Water Level Sensing & Display (ii) Automatic Pump On/Off (ii) Automatic Toggling of Pumps (iv) Auto Change Over In Case of Pump Failure (v) Single Phasing Prevention (vi) Manual Mode Operation (all connected sub systems including all valves in pump houses and connected buildings / overhead tanks and pumps) from the PLC based Control Panel. (B) 01 No. PLC with following specifications:- (i). Should have Industrial Grade Processor. (ii). Protocol supported : Modbus TCPIP, Modbus master/client. (ii). Programming standard supported :- IEC 61131-3. (iv). 1 Nos. non isolated RS 485 communication port, 1 Nos. Ethernet communication port.
79.02	(C) 01 No. HMI - 7" Graphical Touch screen display (i). 01 No. RS 485 and 01 No. USB port (ii). Serial multilink, USB downloading port (ii). Support external data storage on a USB memory stick for storing production data and backing up applications (D) 01 No. SMPS of 6.5A rating as suitable according to panel design. (E) Suitable No. of interposing relays of 220VAC or 24VDC coil rating and 4A contact rating. (F) MCB rating 32A, 25A, 10A, 6A. (G) Illuminated push button & indicator lamp (H) Selector switches, Audio visual alarm indicator:- As per requirement (J) Supply of 2 KVA UPS / INVERTER with Sealed Lead Acid Maintenance free Batteries for powering the panel in case of supply failure. Note :- Cost of defect libility period for SCADA shall be included in quoted rate.
80.00	Supply, Installation Testing & Commissioning of Outdoor type having Canopy and Double Door for weather protection, PLC ( Programmable Logic Controller) based Pump and Valve Automation, Protection Panel with Wireless Radio Frequency based communication, suitable for control and monitoring of 02 Nos. Non Clog Sewage Submersible pumps, 02 Nos. motorized butterfly valves, 02 Nos. pressure transmitter, 01 Nos Ultrasonic sensor (To be installed at Network sump Well).	1.00	Each	Excess(+)	1	Full Conversion	INR	0.00	0.00	INR Zero Only
80.01	The panel should be of minimum size 1000 X 950 X 300 mm front opening type, fabricated from 3.15 mm thick CRCA Sheet & mounting channel 40x40x5mm made out of Angle iron with proper ferrule & cable gland, internal wiring with PVC insulated multistranded copper conductor FRLS cable of adequate size. (A) The Panel should comprise the following items:- (i) Water Level Sensing & Display (ii) Automatic Pump On/Off (iii) Automatic Toggling of Pumps (iv) Auto Change Over In Case of Pump Failure (v) Single Phasing Prevention (vi Manual Mode Operation (all connected sub systems including all valves in pump houses and connected buildings / overhead tanks and pumps) from the PLC based Control Panel. (B) 01 No. PLC with following specifications:- (i). Should have Industrial Grade Processor. (ii). Protocol supported : Modbus TCPIP, Modbus master/client. (iii). Programming standard supported :- IEC 61131-3. (iv). 1 No. non isolated RS 485 communication port, 1 No. Ethernet communication port.
80.02	(C) 01 No. HMI - 7" Graphical Touch screen display (i). 01 No. RS 485 and 01 No. USB port (ii). Serial multilink, USB downloading port (iii). Support external data storage on a USB memory stick for storing production data and backing up applications (D) 01 no. SMPS of 6.5A rating as suitable according to panel design. (E) Suitable no. of interposing relays of 220VAC or 24VDC coil rating and 4A contact rating. (F) MCB rating 32A, 25A, 10A, 6A. (G) illuminated push button & indicator lamp (H) Selector switches, Audio visual alarm indicator:- As per requirement (J) Supply of 1 KVA UPS / INVERTER with Sealed Lead Acid Maintenance free Batteries for powering the panel in case of supply failure.
81.00	Supply, Installing,Testing and Commissioning of Ultrasonic Level Transmitter at dugwell and underground sump for measurement of level with following specification:- Range : 0-8 meters Accuracy : 0.5 % minimum Supply Voltage : 24V DC Output : 4-20 mA , 0-10V DC	9.00	Each	Excess(+)	1	Full Conversion	INR	0.00	0.00	INR Zero Only
82.00	Supply, Installation, testing and Commissioning of 150 mm dia, single phase, Motor Actuated Butterfly valve with disc material SS - 304, Stem Material SS - 431, Seat EPDM, hand wheel for manual operation and having 05 nos. limit switches in total including limit switches for Open / Close condition, valve position indicator and over ride trip. The housing of actuator should be of Aluminium Dicast. The mounting shall be direct on valve type. Input Voltage: 230 V, A.C. Designed line pressure: 16 kg/sq cm. The mounting shall be direct type using specialized arrangement of GI pipe of suitable size/thickness, complete all as specified and directed.	8.00	Each	Excess(+)	1	Full Conversion	INR	0.00	0.00	INR Zero Only
83.00	Supply, Installation, testing and Commissioning of 100 mm dia, single phase, Motor Actuated Butterfly valve with disc material SS - 304, Stem Material SS - 431, Seat EPDM, hand wheel for manual operation and having 05 nos. limit switches in total including limit switches for Open / Close condition, valve position indicator and over ride trip. The housing of actuator should be of Aluminium Dicast. The mounting shall be direct on valve type. Input Voltage: 230 V, A.C. Designed line pressure: 16 kg/sq cm. The mounting shall be direct type using specialized arrangement of GI pipe of suitable size/thickness, complete all as specified and directed.	18.00	Each	Excess(+)	1	Full Conversion	INR	0.00	0.00	INR Zero Only
84.00	Supply, Installation, testing and Commissioning of 50 mm dia, single phase, Motor Actuated Butterfly valve with disc material SS - 304, Stem Material SS - 431, Seat EPDM, hand wheel for manual operation and having 05 nos. limit switches in total including limit switches for Open / Close condition, valve position indicator and over ride trip. The housing of actuator should be of Aluminium Dicast. The mounting shall be direct on valve type. Input Voltage: 230 V, A.C. Designed line pressure: 16 kg/sq cm. The mounting shall be direct type using specialized arrangement of GI pipe of suitable size/thickness, complete all as specified and directed.	4.00	Each	Excess(+)	1	Full Conversion	INR	0.00	0.00	INR Zero Only
85.00	Supply, Installation, Testing and Commissioning and Programming of Master Control Station. The scope includes:- Services for programming, configuration and customisation of the Smart Station Platform with respect to the Sewage Module as per actual site conditions and requirement of the engineer. (a). Landing Page to depict criritcal paramters viz. - Level of sewage in all tanks, pump status ON/OFF/FAIL. (b). Creation of drop down tabs to monitor the all Dugwell and Remote PLC Panel systems individually. (c). Creation of individual PLC Panel wise schematics and layouts for the sewage system as per the actual site including display of all relevant parameters viz. Sewage level, Pump ON/OFF/FAIL status, Valve OPEN/CLOSE/FAIL status. (d). Soft keys for remote manual operation of all pumps and motorised valves from the Master Control station. (e). Creation of Day wise Reports for :- (i) Run hours of pumps (ii) Pump / valve operation failures (iii) Active/Return status of each equipment with date and time. (iv). Configuring notifications, alerts and alarms as per preset logic. (v). Consumption Patterns - Daily, Weekly, Monthly and Annually.	2.00	Each	Excess(+)	1	Full Conversion	INR	0.00	0.00	INR Zero Only
85.01	(f). Personal Computer as central Server for development version of the scada software and reporting the software with following specifiaction:- Intel 10th Gen Core I5, 8 GB RAM, 500 GB HDD, Keyboard / Mouse Make:- DELL, HP, LENOVO & 55 inches LED monitor/ LED TV Make:- SONY, SAMSUNG, LG. (g). 1KVA UPS including batteries for 1/2 Hr backup - Make:- APC, NUMERIC, TATA LIEBERT, MICROTEK (h). A4 Size Monochrome Laser Printer. Note :- Provision of new wired broad band internet connection along with static IP on the Server computer including suitable the internet charges for 12 months as per the requirement of the Engineer in Charge including licensing with the service provider for upkeep of the connection for period of 12 months.
86.00	Supply, Installation, Testing, Commissioning and Programming of Omni and Bi Directional Parabolic antenna with control station to generate strong directional effect with WLAN network support having mast mounting arrangment. Control station should operate on license free frequency with necessary hardware at a suitable location to be connected to the central scada server so as to establish connectivity with every station of the network after conducting a frequency survey of the entire area of interest and identify suitable locations to mount the station hardware and the height of the antennas to establish clear line of sight either directly or by multi hop so as to be able to send data. Antenna type:- Omni and Bi Directional Parabolic antenna Gain:- as per site requirement Degree of protection:- IP65, seawater-resistant, Material:- Lexan EXL 9330 (Antenna housing), V2A (Bracket), V2A (Mast clip), Mounting type:- Mast mounting The should have a approval of Wi-Fi compliance, Environmentally Friendly Use Period :- UNLIMITED = EFUP-e Note:-Rate quoted is deemed to be included for making arrangemets of accessories such as mounting bracket and mast clips.	4.00	Each	Excess(+)	1	Full Conversion	INR	0.00	0.00	INR Zero Only
87.00	Supply, Installation, Testing, Commissioning and Programming of Reporting Software with user configurable reports along with data collection of parameters, events, alarms complete with user defined logo, user name, date and time, page no., header and footer.	2.00	Each	Excess(+)	1	Full Conversion	INR	0.00	0.00	INR Zero Only
88.00	Supply, Installation, Testing, Commissioning and Programming of Smartphone App for Android Operating System consisting of min 20 Screens with user defined format. With this feature client can remotely view project screens on different types of thin client. The feature should also allows client to access projects from almost any other computer or mobile device.	2.00	Each	Excess(+)	1	Full Conversion	INR	0.00	0.00	INR Zero Only
89.00	Supply, Installation, Testing, and Programming of PLC based MIMIC PANEL of a minimum size 800 (W) x 800 ( H ) x 250 (D) (min) made out of 2MM CRCA sheet with Angle iron Stand of size 800 (W) x 300 ( H ) x 250 (D), all properly polished depicting in realtime status of all local pumps and operational valves along with the level of water in Pump house.The panel shall be provided with LED Lighting to facilitate viewing in times of emergency alongwith suitable power UPS backup for 1/2 Hours and the distribution diagram shall be synchronised in real time with Water Supply distribution panel. The front facia of the Panel shall be made out of ink jet printed laminated Latex on Vinyl to clearly depict the layout of the PH in schematic format. The Panel shall consist :- (a). suitable number of input and outputs, (b). LEDs with LED holders, drivers of suitable size / capacity, (c). SMPS (24V / 5A) and MCB of suitable rating,	2.00	Each	Excess(+)	1	Full Conversion	INR	0.00	0.00	INR Zero Only
90.00	Supply, installation, testing, and commissioning of Pressure Transmitter with proper wiring including necessary power pack for supply of DC :- Power supply: 10-36 V DC Enclosure: whether proof IP 65 Process temperature: -10 to 90 Celsius Accuracy: 0.25 %	18.00	Each	Excess(+)	1	Full Conversion	INR	0.00	0.00	INR Zero Only
91.00	Supply, Installing,Testing and Commissioning of Turbidity & pHTransmitter at Pure water sump all as specified and directed Range : 0.001 - 100 NTU Range : 0-14 pH Accuracy : 0.1% Supply Voltage : 24V DC Output : 4-20 mA	2.00	Each	Excess(+)	1	Full Conversion	INR	0.00	0.00	INR Zero Only
92.00	Supply, Installation, Testing and Commissioning of 4 pair CAT 6 UTP cable for Sensors & Communication.etc complete all as speficied and directed.	200.00	RM	Excess(+)	1	Full Conversion	INR	0.00	0.00	INR Zero Only
93.00	Supply only 2 Core 1.5 sq. mm PVC sheathed PVC insulated copper armoured cable. etc complete all as speficied and directed.	200.00	RM	Excess(+)	1	Full Conversion	INR	0.00	0.00	INR Zero Only
94.00	Supply only 4 Core 1.5sq.mm. PVC sheathed PVC insulated copper armoured cable. etc complete all as speficied and directed.	800.00	RM	Excess(+)	1	Full Conversion	INR	0.00	0.00	INR Zero Only
95.00	Supply only 6 Core 1.5sq.mm. PVC sheathed PVC insulated copper armoured cable.etc complete all as speficied and directed.	1400.00	RM	Excess(+)	1	Full Conversion	INR	0.00	0.00	INR Zero Only
96.00	Supply and Fixing pipe galvanised iron light grade 20mm dia ( ISI marked ) with all fittings such as elbow, tee, reducer , coupling etc laid in trenches or on pole, crossing of road, fixed on wall for protection of cables complete all as specified and directed.	160.00	RM	Excess(+)	1	Full Conversion	INR	0.00	0.00	INR Zero Only
97.00	Supply and Fixing pipe galvanised iron light grade 50 mm dia ( ISI marked) with all fittings such as elbow, tee, reducer , coupling etc laid in trenches or on pole, crossing of road, fixed on wall for protection of cables complete all as specified and directed.	120.00	RM	Excess(+)	1	Full Conversion	INR	0.00	0.00	INR Zero Only
98.00	Supply, laying, joining & testing of class K-9 DI pipes of 200 MM bore dia with spigot and socket, suitable for push on rubber joint, with internal cement mortar lining and external zinc and black bitumen coasted pipes in any lengths conforming to IS: 8329-2000 including Gasket & Joints as per IS : 9523-2000 laid in trenches/ Road/ Ducts/ Footpaths/ on wall on floor at location, complete all as specified and directed. Note : DI fittings required shall be measured and paid separately in respective items.	650.00	RM	Excess(+)	1	Full Conversion	INR	0.00	0.00	INR Zero Only
99.00	Supply, installation and testing cast iron sluice valce flanged type, class PN-1.6, 200mm bore ISI marked conforming to IS-14846-2000 complete with stainless steel spindle flanged both ends drilled, CI gate with brass ring and iron wheel handle suitable for CI/DI pipe line including jointing material i.e nuts bolts, washer and gasket etc complete all as specified. Note for item No 46.00 to 99.00: Cost of control cables is deemend to be included in quoted rate for operation of all electro-mechanical equipment for complete operation of STP ( For both 1 MLD and 0.5 MLD)	2.00	Each	Excess(+)	1	Full Conversion	INR	0.00	0.00	INR Zero Only
100.00	FENCING , GATE AND COMPOUND WALL M&L for steel gate 5.5m wide and 2.1m height with RCC pillar incl excavation in soft/loose of soil, plastering, painting etc complete all as specified and shown in TD /2004/13 sh 1/3 to 3/3 CE Jaipur Zone	4.00	Each Job	Excess(+)	1	Full Conversion	INR	0.00	0.00	INR Zero Only
101.00	Preparation of newly plastered/ previously untreated surface of wall and applying two coats of cement base paint over coat of white wash complete all as specified and directed.	1977.12	Sqm	Excess(+)	1	Full Conversion	INR	0.00	0.00	INR Zero Only
102.00	PRECAST ELEMENTS for RCC PRECAST WALL 2.40 M High : Providing, transportation, fixing, erection and installation etc complete for RCC precast Elements for various sizes shapes and steel, including mould making, providing and fixing reinforcement steel, casting with required admixtures, demoulding, curing, transportation, storage, erection at site, grout filling etc for Foundation precast 100 mm thick with connectors for walls 610 wide complete all as specified and shown in CEJZ/ALW/SK/2025/SK-10 sh 1/1 CE Jaipur Zone	247.14	Sqm	Excess(+)	1	Full Conversion	INR	0.00	0.00	INR Zero Only
103.00	PRECAST ELEMENTS for RCC PRECAST WALL 2.40 M High : Providing, transportation, fixing, erection and installation etc complete for RCC precast Elements for various sizes shapes and steel, including mould making, providing and fixing reinforcement steel, casting with required admixtures, demoulding, curing, transportation, storage, erection at site, grout filling etc for Walls precast 100 mm thick for boundary wall having lifting hooks on the top for fixing the angle complete all as specified nd shown in CEJZ/ALW/SK/2025/SK-10 sh 1/1 CE Jaipur Zone	1235.70	Sqm	Excess(+)	1	Full Conversion	INR	0.00	0.00	INR Zero Only
103.01	Notes for item No 102 & 103 here-in-before :-(i) The rate includes in quoted rates for all labour wages for each stage, machinery, cranes to lift at place at various stages etc including placement of electrical conduits and switch boxes as per drawings, placement of UPVC pipe, including jointing clips , grout couplers if required, GI corrugated sheaths for dowel bars, proving grouting the joints wherever required, for welding already provided jointing steel bars, making good the joints with laticrete or equivalent providing flexible conduit connection of wall and slab conduit , filling concrete in the holes kept for jointing electrical and plumbing pipes, providing required cutouts for sewerage and other pipes, lifting and fixing arrangements as per shown in drawings
104.00	MANNING , OPERATION AND MAINTAINANCE DURING 2 YEARS OF DEFECT LIABILITY PERIOD Manning and operation of sewage treatment plant installations including various electrical and mechanical equipment and attending minor fault of STP, maintenance of chlorine PPM, TDS testing of treated water all as specified and directed by Engr-in-Charge. The trades men will be in possession of required working/safety tools to operate the plant/DG set/ Control panel. The person shall be carried out the maintenance of plant and keeping the installation neat and clean. All document related to the equipments such as log sheet, record of RSEB power supply are to be mainained as per prescribe format approved by Engr-in-Charge and treated water distributed supply distribution system during supply Hrs with one operator skilled (FGM) for each STP (Total 02 Nos STP i.e .050 MLD and 1 MLD capacity) daily in three shifts per day (Morning, Evening and Night) (8 Hours per shift) including sunday and holiday, complete all as specified and as directed by Engineer-in-Charge.	24.00	Per Month	Excess(+)	1	Full Conversion	INR	0.00	0.00	INR Zero Only
105.00	MANNING , OPERATION AND MAINTAINANCE FOR 8 YEARS AFTER DEFECT LIABILITY PERIOD Manning and operation of sewage treatment plant installations including various electrical and mechanical equipment and attending minor fault of STP, maintenance of chlorine PPM, TDS testing of treated water all as specified and directed by Engr-in-Charge. The trades men will be in possession of required working/safety tools to operate the plant/DG set/ Control panel. The person shall be carried out the mainetnance of plant and keeping the installation neat and clean. All document related to the equipments such as log sheet, record of RSEB power supply are to be maintained as per prescribe format approved by Engr-in-Charge and of treated water distributed supply distribution system during supply Hrs with One operator skilled (FGM) for each STP (Total 02 Nos STP i.e .050 MLD and 1 MLD capacity) daily in three shifts per day (Morning, Evening and Night) (8 Hour per shift) including sunday and holiday, Complete all as specified and as directed by Engineer-in-Charge.	96.00	Per Month	Excess(+)	1	Full Conversion	INR	0.00	0.00	INR Zero Only
105.01	Note for Item No 104.00 to 105.00 : (a) Contractor will arrange biometric attendence machine at installation and payment will only be made on the basis of biometric attendence. (b) Reliever for weekly off shall be provided by the contractor at his own cost and rates for the same shall be deemed to included in the quoted rates. No extra payment shall be admissible on this account (c) All types of T&P required for day to day reqmt shall be provided by contractor (d) All types of transportation if reqd for handling materials/eqpt etc shall be provided by the contractor (e) All types of fire eqpts provided in all the installations shall be maintained and operated properly (f) All electrical fittings and fixtures to be maintained and contractor shall be responsible for any damage (g) All types of water tanks incl flusihing tanks shall be maintained.
105.02	(h) All installations to be kept neat and clean all the time and security checks to be carried out daily (j) In case of any damage misuse mishandling,theft of Govt property, contractor will be held responsible for the same (k) All saftey eqpts such as breathing apparatus, safety belt, air hose respiratory, portable lighting eqpt, driver suit etc for working hazardous condition to be provided by contractor (l) First Aid Box with basic medicines to be kept in main installation by the contractor (m) misuse of electricity and water to be penalised and effective recovery will be made by the department (n) Manning and operation shall start as per the stipulated date in work order (p) Installation shall be kept neat & clean all the time & security of assests shall be ensured (q) Proper disposal of material of residual dry waste/other waste material should be carried out by the contractor all as directed by Engr-in-charge. The cost of the same is deemed to be included in rates quoted by the contracotor (r) Wages to be paid to employee through individual bank account only duly AADHAR linked (i.e payment through cheque/NEFT/RTSG) and documentry proof of payment to trademens/Operators shall be submitted to the department for releasing of payment.
105.03	(s) Minimum I.T.I or any other Higher Qualification with Two years Experience certificate for Operator and Two years experince for helper employed shall be submitted. (t) The rate quoted shall be deemed to including the Providing Stationery for all above mentioned installations. (u) Group insurance, E.S.I, and EPF shall be provided by the contractor for his staff/tradesmen/operator and documentry proof of payment to trademens/Operators shall be submitted to the department for releasing of payment. (v) In case of absence operator, double the rate quoted to be recovered. (w) Manning of SCADA system including cost of upgradation system, cost of spare parts cost defect libility period operation including payments of bills by telecome service provided shall be included in rate quoted by the contractor. Cost of SCADA will be without manning costs. The cost of spares should be provided out of maintance fund as and when required, other than in defect libity period .
106.00	COMPREHENSIVE MAINTENANACE FOR 8 YEARS AFTER DEFECT LIABILITY PERIOD Comprehensive maintenance of sewage treatment plant installation (capacity 1MLD and 0.5 MLD) (Total 02 Nos) including various electrical and mechanical equipments and attending fault of STP in reliable safe and efficient operating conditioning by regularly examining, lubricating and adjusting the equipment and carryout planned maintanance (Monthly, quarterly, half yearly) in systematic and controlled manner using technique and expertise and replacement of all unserviceable components as specified and directed by Engr-in-Charge. The trademan will be in position of required working/ safety tools to maintained the plant/ DG set/ control panels. The person shall carying out the periodical maintenance of plant. Internal and external finishes shall be carried out every 2nd year and cleaning of treated water sump and drying beds to be done every year and cost for the same shall be deemed to included in the quoted rates	96.00	Per Month	Excess(+)	1	Full Conversion	INR	0.00	0.00	INR Zero Only
Total in Figures	0.00	INR Zero Only	4	Construction of chamber for 100mm sluice plates	item5	10	Nos
Quoted Rate in Figures	Select	0.0000	0.0000	Zero Only
Quoted Rate in Words	INR Zero Only

Download Tender

Your Account

E-IN-C BRANCH - MILITARY ENGINEER SERVICES||CE SWC AND CE JAIPUR JAIPUR - MES

Tender Details

Costs

Documents

BOQ

Chart1

BoQ1

Top Keywords

TENDER BY STATES View All

TENDER BY AUTHORITIES View All

TENDER BY CATEGORIES View All

Your Account

E-IN-C BRANCH - MILITARY ENGINEER SERVICES||CE SWC AND CE JAIPUR JAIPUR - MES

Tender Details

Costs

Documents

BOQ

Chart1

BoQ1

Share this

Top Keywords

TENDER BY STATES View All

TENDER BY AUTHORITIES View All

TENDER BY CATEGORIES View All