Bidhelp
E-IN-C BRANCH - MILITARY ENGINEER SERVICES||CE SC AND CE CHENNAI ZONE - MES||CWE (ARMY) BANGALORE - MES||GE(NORTH) BANGALORE - MES
E-IN-C BRANCH - MILITARY ENGINEER SERVICES||CE SC AND CE CHENNAI ZONE - MES||CWE (ARMY) BANGALORE - MES||GE(NORTH) BANGALORE - MES
GARRISON ENGINEER NORTH BANGALORE
Karnataka QTY :

Items - REPAIR REPLACEMENT OF US RUSTED AC CI GI PIPELINE INCL CONNECTED ITEMS SUCH AS FITTINGS CONTROL VALVE CONNECTED ALLIED WORKS AT MEG CENTRE REPAIR REPLACEMENT OF EXTERNAL SERVICES ELECTRIFICATION SUPPLY DISTRIBUTION SYSTEM CONNECTED

Tender Details
Costs
Documents
BOQ

BoQ1

Item Rate BoQ
BoQ_Ver3.0Item RateNormalINR OnlyINR
Select, Excess (+), Less (-)Less (-)
Tender Inviting Authority: GARRISON ENGINEER (North) BANGALORE -560042
Name of Work : REPAIR / REPLACEMENT OF U/S RUSTED AC / CI / GI PIPELINE INCL CONNECTED ITEMS SUCH AS FITTINGS & CONTROL VALVE & CONNECTED ALLIED WORKS AT MEG & CENTRE, REPAIR / REPLACEMENT OF EXTERNAL SERVICES ELECTRIFICATION SUPPLY DISTRIBUTION SYSTEM & CONNECTED ALLIED WORKS AT MEG & CENTRE AND REPAIR / MAINTENANCE OF SEWAGE TREATMENT PLANT AT TB-I UNDER GE (NORTH) BANGALORE
Contract No: GE(N)/B/ OF 2025-2026
Bidder Name :
PRICE SCHEDULE (This BOQ template must not be modified/replaced by the bidder and the same should be uploaded after filling the relevent columns, else the bidder is liable to be rejected for this tender. Bidders are allowed to enter the Bidder Name and Values only)
Sl. No.Item DescriptionItem Code / MakeQuantityUnitsEstimated RateAddition / DeductionAddition / Deduction ValuesCurrency Convertion against each ItemQuoted Currency in INR / Other CurrencyBASIC RATE In Figures To be entered by the Bidder Rs. P Excise DutyVATFreight Charges ( Unloading & Stacking)Any Other Taxes/Duties/LeviesOther Taxes 2IIIrd Party i.e DGS&D / RITES etc Inspection Charges @0.34%+Service TaxLess for Cenvat Credit,if any respect of Supplies Under full Excise Duty Category TOTAL AMOUNT With TaxesTOTAL AMOUNT With TaxesTOTAL AMOUNT In Words
12334678910111251415161718192021222324252627282930313233343536373839404142434445464748495051526547
1Excavation in trenches in hard/dense soil not exc 1.5 mtr wide and not exc 1.5 mtr in depth for laying of cables/errection of pole etc complete all as specified and as directed. 869.00CUBIC METRE100.0000Excess(+)1Full ConversionINR0.000.00INR Zero Only1.01Supplying, Conveying and fixing spls. Including eartitem1123.223Nos
2Excavation in trenches in hard/dense soil not less than 1.5 mtr deep and not exc 3 mtr in deep for pole foundation etc complete all as specified and as directed. 0.20CUBIC METRE100.0000Excess(+)1Full ConversionINR0.000.00INR Zero Only1.01Supplying, Conveying and fixing spls. Including eartitem1123.223Nos
3Returning, filling in trenches incl spreading leveling watering and well ramming in layers with hard/dense soil not exc 25 cm thick in each layer complete as specified and as directed 608.60CUBIC METREExcess(+)1Full ConversionINR0.000.00INR Zero Only
4Removing excavated soil to a distance not exc 1.5 mtr above the starting point complete all as specified and as directed 259.00CUBIC METRE10.0000Excess(+)1Full ConversionINR0.000.00INR Zero Only
5M & L for sand cushioning with a layer of river sand 23 cm thick under and above the cable complete all as specified and as directed160.38CUBIC METRE100.0000Excess(+)1Full ConversionINR0.000.00INR Zero Only1.01Supplying, Conveying and fixing spls. Including eartitem1123.223Nos
6S & L sub class burnt bricks for cable protection complete as specified as directed17.22PER 1000Excess(+)1Full ConversionINR0.000.00INR Zero Only
7Supply and laying cable XLPE insulated screened PVC bedded galvanised steel strip or wire armored, electric power cable (heavy duty) 1100 Volts grade with stranded aluminium conductor connected with suitable legs including neccessary roadcrossing if applicable and taking out the existing unserviceable cable for following size :- 2 C x 10 Sqmm150.00RUNNING METRE10.0000Excess(+)1Full ConversionINR0.000.00INR Zero Only
8All as per item No. 7 above but for 4 C x 16 Sqmm250.00RUNNING METRE10.0000Excess(+)1Full ConversionINR0.000.00INR Zero Only
9All as per item No. 7 above but for 3.5 C x 25 Sqmm225.00RUNNING METRE10.0000Excess(+)1Full ConversionINR0.000.00INR Zero Only
10All as per item No. 7 above but for 3.5 C x 35 Sqmm300.00RUNNING METRE10.0000Excess(+)1Full ConversionINR0.000.00INR Zero Only
11All as per item No. 7 above but for 3.5 C x 50 Sqmm350.00RUNNING METRE10.0000Excess(+)1Full ConversionINR0.000.00INR Zero Only
12All as per item No. 7 above but for 3.5 C x 70 Sqmm300.00RUNNING METRE10.0000Excess(+)1Full ConversionINR0.000.00INR Zero Only
13All as per item No. 7 above but for 3.5 C x 95 Sqmm300.00RUNNING METRE10.0000Excess(+)1Full ConversionINR0.000.00INR Zero Only
14All as per item No. 7 above but for 3.5 C x 120 Sqmm200.00RUNNING METRE10.0000Excess(+)1Full ConversionINR0.000.00INR Zero Only
15All as per item No. 7 above but for 3.5 C x 150 Sqmm175.00RUNNING METRE10.0000Excess(+)1Full ConversionINR0.000.00INR Zero Only
16All as per item No. 7 above but for 3.5 C x 185 Sqmm125.00RUNNING METRE10.0000Excess(+)1Full ConversionINR0.000.00INR Zero Only
17All as per item No. 7 above but for 3.5 C x 240 Sqmm100.00RUNNING METRE10.0000Excess(+)1Full ConversionINR0.000.00INR Zero Only
18M&L for replacement of iron work of any type incl cross arms, supports, bracing MS clamps etc made out of MS channel/angle iron/flat iron/ round section of any size and bolt nuts and washer incl painting with two costs of aluminium paint over a coat of red oxide all as specified and as directed 0.25QUINTAL10.0000Excess(+)1Full ConversionINR0.000.00INR Zero Only
19M&L in replacement of pin type porcelain, vitreous white or brown insulator incl one galvanized mild steel spindle two galvanized iron washer and galvanized iron nut 100 mm height and 65mm dia for 1100 volts grade complete all as specified and as directed 12.00EACH10.0000Excess(+)1Full ConversionINR0.000.00INR Zero Only
20M&L in replacement of shackle type porcelain, vitreous white or brown insulator incl one galvanized mild steel spindle two galvanized iron washer and galvanized iron nut 75 mm height and 90mm dia for 1100 volts grade complete all as specified and as directed 30.00EACH10.0000Excess(+)1Full ConversionINR0.000.00INR Zero Only
21M & L for GI tubing light grade 40mm with all accessories for cable protection fixed on poles/bldgs/road and laid in trenches incl necessary MS clamps, bolts and nuts etc all as specified and as directed. Note road cutting rate are included on the above items.15.00RUNNING METRE10.0000Excess(+)1Full ConversionINR0.000.00INR Zero Only
22M & L for GI tubing light grade 50mm with all accessories for cable protection fixed on poles/bldgs/road and laid in trenches incl necessary MS clamps, bolts and nuts etc all as specified and as directed. Note road cutting rate are included on the above items.15.00RUNNING METRE10.0000Excess(+)1Full ConversionINR0.000.00INR Zero Only
23M & L for GI tubing light grade 80mm with all accessories for cable protection fixed on poles/bldgs/road and laid in trenches incl necessary MS clamps, bolts and nuts etc all as specified and as directed. Note road cutting rate are included on the above items.15.00RUNNING METRE10.0000Excess(+)1Full ConversionINR0.000.00INR Zero Only
24M & L for earthing complete with galvanized steel earth plate electrode 60 cm x 60 cm x 6mm thick buried directly in ground vertically to a depth not less than 2.5 mtr below ground level with top edge of earth plate at a depth not less than 1.5 mtr connected to and incl galvanized strip 25x4mm as earth lead up to 7.5 mtr long by means of nuts, bolts, thimbles,check nuts and washers etc made of galvanized iron connected to earthing test point all as shown in electrical plate No 3 of SSR Part-I 1991 and as specified or indicated and testing on completion incl earth work and excavation in any type of soil PCC (1:3:6) type C1 chamber, pre cost slab 40mm thick in cement concrete (1:2:4) type B1 with 8 mm dia MS bars reinforced at 10 cm centre to centre both ways incl funnel with watering pipe wire mesh and lugs, incl test point complete all as specified and as directed6.00EACH10.0000Excess(+)1Full ConversionINR0.000.00INR Zero Only
25M & L for tightening of ACSR (Aluminium conductor steel reinforced) conductor of any size between two poles 06 runs of conductor incl binding wire of appropriate size complete incl clearing of path and branch cutting etc all as specified and as directed 50.00JOB10.0000Excess(+)1Full ConversionINR0.000.00INR Zero Only
26S & F in replacemet of UNSV existing /suitable size MCCBs 4 pole 415 Volts 50HZ incl complete connections with incoming cable and out going cable with suitable thimbles and crimping the thimbles with crimping tools insulating the naked portion with insulation tape as under:- Make INDOASIAN or equivalent. MCCB 100 Amps ,16 KA with adjustable Thermal setting 7.00EACH10.0000Excess(+)1Full ConversionINR0.000.00INR Zero Only
27All as per item No. 26 above but for MCCB 200 Amps 36 KA with adjustable Thermal setting .2.00EACH10.0000Excess(+)1Full ConversionINR0.000.00INR Zero Only
28All as per item No. 26 above but for MCCB 250 Amps 36 KA with adjustable Thermal setting .2.00EACH10.0000Excess(+)1Full ConversionINR0.000.00INR Zero Only
29All as per item No. 26 above but for MCCB 315 Amps 36 KA with adjustable Thermal setting .1.00EACH10.0000Excess(+)1Full ConversionINR0.000.00INR Zero Only
30All as per item No. 26 above but for MCCB 63 Amps, 25 KA with adjustable Thermal setting 8.00EACH10.0000Excess(+)1Full ConversionINR0.000.00INR Zero Only
31M & L for replacement of LT 4 line separator 415 volts 50 Hz all as specified as directed25.00EACH10.0000Excess(+)1Full ConversionINR0.000.00INR Zero Only
32M&L for taking down old cable joint and Supply and fix cable jointing kit for 1.1KV grade cable for straight through joint complete with jointing material and accessories suitable for 3.5 core/4core XLPE armoured aluminium conductor cable for following sizes:- 3.5 C x 25 to 35 Sqmm2.00EACH10.0000Excess(+)1Full ConversionINR0.000.00INR Zero Only
33All as per item No. 32 above but for 3.5 C x 50 to 120 Sqmm2.00EACH10.0000Excess(+)1Full ConversionINR0.000.00INR Zero Only
34M&L for painting of steel tubular/PCC poles of any height and type, incl security light mounting brackets with one coat of aluminium paint/two coat of cement base paint incluing painting black and yellow strip or as ordered by engineer-in-charge on poles up to 1.5 mtr high above coping level and numbering of pole complete all specified and as directed.50.00JOB10.0000Excess(+)1Full ConversionINR0.000.00INR Zero Only
35Dismantling of ACSR (Aluminium conductor steel reinforced) conductors2.00QUINTAL10.0000Excess(+)1Full ConversionINR0.000.00INR Zero Only
36M&L of ACSR (Aluminium conductor steel reinforced) conductor of any size on poles incl binding wire of appropriate size complete incl clearing of path and branch cutting etc all as specified and as directed 1.00QUINTAL10.0000Excess(+)1Full ConversionINR0.000.00INR Zero Only
37Refixing of ACSR conductor connected with new existing wire tightening to insulator incl line clearance by pruning of tree branch approx 1 m apart from conductor tightening side.1.00QUINTAL10.0000Excess(+)1Full ConversionINR0.000.00INR Zero Only
38Stay assembley complete with all accessories as shown in elect plate No 1 of SSR Part-I consisting of stay rod 20mm dia 1.8 mtr long,size of stay plate 230 x 230 x 6 mm with nuts,bolts,insulator stay clamps etc. complete all as shown on drawing and as directed. Note:- Excavation and stay wire shall be measured and paid separately4.00EACH SET10.0000Excess(+)1Full ConversionINR0.000.00INR Zero Only
39M&L for galvanized stay wire stranded 7/4 mm complete all as specified and as directed 0.50QUINTAL10.0000Excess(+)1Full ConversionINR0.000.00INR Zero Only
40Dismantling the damaged unservicable pole of any type.3.00EACH10.0000Excess(+)1Full ConversionINR0.000.00INR Zero Only
41Supply and errect steel tubular swaged poles complete with cast iron base plate,finial taper plug,bolts,nuts & screws as specified type 410SP-31, 9 mtr long .3.00EACH10.0000Excess(+)1Full ConversionINR0.000.00INR Zero Only
42M&L for PCC 1:3:6 type C1 with 20mm graded stone aggregate for couping of pole, filling and mass concrete of pole, make good to road surface, hard standing etc incl necessary form work all as specified and as directed4.00CUBIC METRE10.0000Excess(+)1Full ConversionINR0.000.00INR Zero Only
43M&L for PCC 1:4:8 type D2 with 40mm graded stone aggregate in foundation of poles all as specified and as directed1.00CUBIC METRE10.0000Excess(+)1Full ConversionINR0.000.00INR Zero Only
44M&L for outdoor type, double door sheet metal enclosure/Junction box of size 80x80x30 cm with aluminium bus bar 250 Amps for 3 phase & neutral including MCCB 4 pole 415 volts 160 Amps 36 KA including removing old unserviceable junction box complete all as specified and as directed4.00EACH10.0000Excess(+)1Full ConversionINR0.000.00INR Zero Only
45Supply and fix in replacement of Timeline distribution board 32 A 3 pole /230V analog time switch including complete accessories relay contactor, timer etc, all as specified and as directed. Make:- Indoasian or equivalent2.00EACH10.0000Excess(+)1Full ConversionINR0.000.00INR Zero Only
46M&L for cable finding cable fault in LT cables any sizes complete all as specified and as directed1.00JOB10.0000Excess(+)1Full ConversionINR0.000.00INR Zero Only
47Supply & Fix on pole/ wall etc GI pipe bracket made of 40mm bore light grade GI pipe1.5 mtr long suitably bent to shape and fixed on wall/ pole for fixing street light fitting with 2 Nos suitable MS clamps of size 25 x 3 mm size incluiding bolts, nuts, washers all as specified and as directed.5.00EACH10.0000Excess(+)1Full ConversionINR0.000.00INR Zero Only
48Supply and fixing,replacement of moulded (FRP) junction box with IP 65 protection of size 300x200x80mm with 32 Amp 4 way heavy duty terminal block with 6 Amp MCB SP and two number of cable entry gland of standard size with suitable MS bracket to fix with pole complete all as directed 20.00EACH10.0000Excess(+)1Full ConversionINR0.000.00INR Zero Only
49Supply and fixing 60 W LED street light fitting with pressure die cast housing along with prismatic polycarbonate modular secondary lens optics with IP 66 ingress protection and impact resistance of IK 08. 4kV inbuilt and 10 kV external surge protection with top opening driver cover for easy maintenance .including taking down old unserviceable street light fittings from pole. Make:- Bajaj, or equivalent15.00EACH10.0000Excess(+)1Full ConversionINR0.000.00INR Zero Only
50Supply and fixing 90 W LED street light fitting with pressure die cast housing and toughened glass and individual LEDs with secondary lens optics with IP 66 ingress protection and impact resistance of IK 07. 5kV inbuilt and 10 kV external surge protection with top opening driver cover for easy maintenance .including taking down old unserviceable street light fittings from pole. Make:- Bajaj, or equivalent10.00EACH10.0000Excess(+)1Full ConversionINR0.000.00INR Zero Only
51S&F in replacement of 2 runs of PVC insulated 2.5 sqmm single core multistranded copper conductor cable and one run of 2.5 sqmm copper wire as earth continuity conductor drawn through and incl rigid non metalic conduit 20 mm external dia fixed on poles & connecting up all as specified and as directed. Note: Two runs of cable and one run of earth wire and one run of conduit shall be measured as one length.100.00RUNNING METRE10.0000Excess(+)1Full ConversionINR0.000.00INR Zero Only
52Supply & fix in replacement of on load Change over switch 4 pole in sheet metal enclosure compact design rating 63 Amps suitable for isolation and prevent leakage current/ flush over between phases, handle lock feature in off position with three padlocks Make: Indo Asain or its equivalent.1.00EACH10.0000Excess(+)1Full ConversionINR0.000.00INR Zero Only
53Supply & fix in replacement of on load Change over switch 4 pole in sheet metal enclosure compact design rating 100 Amps suitable for isolation and prevent leakage current/ flush over between phases, handle lock feature in off position with three padlocks Make: Indo Asain or its equivalent.1.00EACH10.0000Excess(+)1Full ConversionINR0.000.00INR Zero Only
54Dismanling and taking out the LED street light fittings any make from Pole and removing the burned out /unserviceable LED driver 25 W to 90W and replacement of new drive to make the fitting serviceable and refixing the existing/new location all as directed at site. 15.00EACH10.0000Excess(+)1Full ConversionINR0.000.00INR Zero Only
55Dismanling and taking out the LED street light fittings any make from Pole and removing the burned out /unserviceable LED driver 90 W and replacement of new drive to make the fitting serviceable and refixing the existing/new location all as directed at site. 15.00EACH10.0000Excess(+)1Full ConversionINR0.000.00INR Zero Only
56Dismanling and taking out the flood light from high mast pole and removing the burned out/unserviceable LED driver 200 W and replacement of new drive to make the fitting serviceable and refixing the existing/new location all as directed at site. 3.00EACH10.0000Excess(+)1Full ConversionINR0.000.00INR Zero Only
57Supply & Fix 100W LED flood light luminaries with innovative die-cast aluminium flood light with highly efficient LEDs as light source, suitable for highmast lighting with complete accessories including taking down old unserviceable flood lights from high mast pole all as specified and as directed. Make : Bajaj or equivalent.4.00EACH10.0000Excess(+)1Full ConversionINR0.000.00INR Zero Only
58M&L for painting of outdoor type Feeder piller panel upto the size of 1100 x 450 x 1200 mm (approx), incl replacement of door hinges with new one and apply one coat of smoke grey colour paint and base angle with black paint by Engineer-in-charge complete all specified and as directed.5.00JOB10.0000Excess(+)1Full ConversionINR0.000.00INR Zero Only
59M&L for painting of outdoor type Lt panel upto the size of 2500 x 600 x 3000 mm (approx), incl replacement of door hinges with new one and apply one coat of smoke grey colour paint and base angle with black paint by Engineer-in-charge complete all specified and as directed.5.00JOB10.0000Excess(+)1Full ConversionINR0.000.00INR Zero Only
60Boring of holes under road, pavement, hard standing by trenchless techless using ultra sounding technique and necessary machine including HDPE pipe of 63 mm dia bore suitable for 0.4 mpa working pressure.15.00RUNNING METRE10.0000Excess(+)1Full ConversionINR0.000.00INR Zero Only
61Supply, testing and commissioning in replacement of weather and vermin proof LT feeder pillar box factory fabricated outdoor cubical/kiosk type CPRI approved and confirming to IS 5036 totally enclosed made out of 3 mm thick sheet metal enclosure with angle iron frame of M.S. angle 50x50x6 mm suitable for operation on 3 phase 4 wire, 440 volts 50 HZ system, with hinged panel centre opening front and rear opening doors (covers) with handles, each control switch to be fixed in each compartment with hinged door, bottom gland plate and locking arrangement consisting of sufficient Nos of circular cable entry holes at bottom only with suitable PVC/rubber bushes to prevent ingress of water/vermin etc, inside the enclosure, the required nos of holes to be fixed with chromium plated brass cable glands for cable entry and exit complete with necessary internal wiring with stranded copper conductor PVC insulated cables of adequate size, duly with powder coated, painted one coat of red oxide primer and two coats of synthetic enamel paint of gray or any other approved colour and bus bar for phase & neutral 500 Amps,36 KA capacity and IP 54 protection mounted on epoxy insulator-01 Set including mounting the panel board on ground with PCC 1 :3:6 bedding upto a height of 50 cm above ground level and the size of feeder should not less than 150x130x 45 cm. complete all as directed and comprising the following including taking out unseviceable LT Panel :- Contd/---62 2.00JOB10.0000Excess(+)1Full ConversionINR0.000.00INR Zero Only
62 Contd/---61 Note : serviceable MCCB will be deposit at MES store. (i) Incoming MCCB 4 pole, 400 Amps 36 KA 415 Volts -01 No (ii) Outgoing MCCB 4 pole, 250 Amps 25 KA 415 Volts -01 No (iii) Outgoing MCCB 4 pole, 200 Amps 25 KA 415 Volts -02 Nos (iv) Outgoing MCCB 4 pole, 100 Amps 16 KA 415 Volts -02 Nos (v) Digital Voltmeter 0-500 volts with selector switch - 01 No (vi) Digital Amps meter CT operated 0-400 Amps with phase selector switch - 01 Nos (vii) LED Indicator lamp ( RYB ) - 01 Set (03 Nos)
63M&L in replacement of outdoor type Lt panel front opening door upto the size of 2500 x 3000 mm (approx), incl replacement of door hinges with new one and duly with powder coated, painted one coat of red oxide primer and two coats of synthetic enamel paint of smoke grey colour as directed by Engineer-in-charge complete all specified and as directed.3.00EACH JOB10.0000Excess(+)1Full ConversionINR0.000.00INR Zero Only
64Taking up CI/DI water mains (including all fittings), with spigot and socket ends and lead joints / Titan Joints for the following size :- 150 mm bore 24.00RUNNING METRE10.0000Excess(+)1Full ConversionINR0.000.00INR Zero Only
65All as per item No. 64 above but for 100 mm bore 24.00RUNNING METRE10.0000Excess(+)1Full ConversionINR0.000.00INR Zero Only
66S&F DI pipe (flanged / spigot type) laid in trenches of the following sizes :- 150 mm dia 24.00RUNNING METRE10.0000Excess(+)1Full ConversionINR0.000.00INR Zero Only
67All as per item No. 66 above but for 100 mm dia Note :- (i) Cost of GI specials shall be measured and paid separetely. 24.00RUNNING METRE10.0000Excess(+)1Full ConversionINR0.000.00INR Zero Only
68Cutting of DI/CI pipe in position for insertion of CI/DI specials of following sizes;- 150 mm bore 5.00EACH10.0000Excess(+)1Full ConversionINR0.000.00INR Zero Only
69All as per item No. 68 above but for 100 mm bore 7.00EACH10.0000Excess(+)1Full ConversionINR0.000.00INR Zero Only
70All as per item No. 68 above but for 80 mm bore 1.00EACH10.0000Excess(+)1Full ConversionINR0.000.00INR Zero Only
71M&L for DI Specials like bends, tappers, tee pieces all sockets, all spitgot, collars, caps & plugs any size & shape as ordered by Engineer- in- charge incl testing complete as specified & directed for the following sizes:- Up to 150 mm bore 125.00KILO GRAM10.0000Excess(+)1Full ConversionINR0.000.00INR Zero Only
72M&L Run lead joint for water mains of the following size of CI pipes :- 150mm10.00EACH10.0000Excess(+)1Full ConversionINR0.000.00INR Zero Only
73All as per item No. 72 above but for 100mm Note:- Excavation and earth work shall be measured and paid separately5.00EACH10.0000Excess(+)1Full ConversionINR0.000.00INR Zero Only
74Dismantaling the sluice valves in various location and reconditioning the sluice valve by replacing SS spindle, spindle nuts with brass ring, gland nuts, gland packing etc and refixing after properly repairs of the following sizes:- 150 mm dia bore2.00EACH JOB10.0000Excess(+)1Full ConversionINR0.000.00INR Zero Only
75All as per item No. 74 above but for 100 mm dia bore4.00EACH JOB10.0000Excess(+)1Full ConversionINR0.000.00INR Zero Only
76M&L for repacking stuffing box of sluice valve spindle including taking a part and reassembling of following sizes:- 150 mm bore4.00EACH10.0000Excess(+)1Full ConversionINR0.000.00INR Zero Only
77All as per item No. 76 above but for 100 mm bore 5.00EACH10.0000Excess(+)1Full ConversionINR0.000.00INR Zero Only
78All as per item No. 76 above but for 80 mm bore2.00EACH10.0000Excess(+)1Full ConversionINR0.000.00INR Zero Only
79S&F GI water tubing medium grade with all fitting (flanged/socket/union/tee etc) laid in trenches/walls/floors/roof including taking down old unsv GI / HDPE pipe complete of following sizes :- 20mm dia300.00RUNNING METRE10.0000Excess(+)1Full ConversionINR0.000.00INR Zero Only
80All as per item No. 79 above but for 25mm dia225.00RUNNING METRE10.0000Excess(+)1Full ConversionINR0.000.00INR Zero Only
81All as per item No. 79 above but for 40mm dia150.00RUNNING METRE10.0000Excess(+)1Full ConversionINR0.000.00INR Zero Only
82All as per item No. 79 above but for 50mm dia410.00RUNNING METRE10.0000Excess(+)1Full ConversionINR0.000.00INR Zero Only
83All as per item No. 79 above but for 80mm dia180.00RUNNING METRE10.0000Excess(+)1Full ConversionINR0.000.00INR Zero Only
84All as per item No. 79 above but for 100mm dia150.00RUNNING METRE10.0000Excess(+)1Full ConversionINR0.000.00INR Zero Only
85S&F brass non return valve 63/65/80 mm dia internal threded type complete including taking down the existing all as specified and as directed.5.00EACH10.0000Excess(+)1Full ConversionINR0.000.00INR Zero Only
86Supply & fixing in replacement of the following size gun metal Gate valve with iron wheel. Make : NETA/BIR/VENUS:- 20 mm dia5.00EACH10.0000Excess(+)1Full ConversionINR0.000.00INR Zero Only
87All as per item No. 86 above but for 25 mm dia15.00EACH10.0000Excess(+)1Full ConversionINR0.000.00INR Zero Only
88All as per item No. 86 above but for 40 mm dia5.00EACH10.0000Excess(+)1Full ConversionINR0.000.00INR Zero Only
89All as per item No. 86 above but for 50 mm dia15.00EACH10.0000Excess(+)1Full ConversionINR0.000.00INR Zero Only
90Dismantling Old valve pit complete with deteriorated MS cover and Construction of brick massonry valve pit chamber of inner dimension 200x250x115 cms suitable for sluice valves upto 150mm size, with PCC 1:4:8 type D-2 for foundation, brick work in cm 1:6 rendering 1:4, 15mm plastering, coping in PCC 1:2:4 type B-1, incl necessary earth work, including MS sheet cover of thickness 3.15mm on 50x50x6 mm angle iron framework including two coats of synthetic enamelled paint over a coat of red oxide primer with making provision of locking arrangement .4.00EACH JOB10.0000Excess(+)1Full ConversionINR0.000.00INR Zero Only
91S&F in replacement of sluice valve both side flanged and ISI marked (IS-780) of sluice valve cast iron body with S/S spindle and brass fly nuts, class PN-1.6 and cast iron hand wheel and joining with nut, bolt, washers and rubber insortion packing 6mm thick etc of following sizes:- 150 mm dia bore4.00EACH10.0000Excess(+)1Full ConversionINR0.000.00INR Zero Only
92All as per item No. 91 above but for 100 mm dia bore3.00EACH10.0000Excess(+)1Full ConversionINR0.000.00INR Zero Only
93Removing of unserviceable foot valve from tank and replacement with new CI foot valve ball type of following sizes:- 150 mm dia bore5.00EACH10.0000Excess(+)1Full ConversionINR0.000.00INR Zero Only
94All as per item No. 93 above but for 100 mm dia bore5.00EACH10.0000Excess(+)1Full ConversionINR0.000.00INR Zero Only
95All as per item No. 93 above but for 80 mm dia bore1.00EACH10.0000Excess(+)1Full ConversionINR0.000.00INR Zero Only
96Removing old unserviceable float valve from service tank supply and fix float valve with PVC body aluminium float rod, nylon float high pressure type (Make:- Prayag) for the following size:- 20 mm bore350.00EACH10.0000Excess(+)1Full ConversionINR0.000.00INR Zero Only
97All as per item No. 96 above but for 25 mm bore75.00EACH10.0000Excess(+)1Full ConversionINR0.000.00INR Zero Only
98Taking out old unserviceable foot valve from UG sump and removing unserviceable leather from suction line and replacement the same with high quality leather including nuts, bolts, washer etc and servicing for the following sizes. Make : Kartar/Kirloskar/ Venus/Zoloto/Bir :-. 150 mm bore2.00EACH JOB10.0000Excess(+)1Full ConversionINR0.000.00INR Zero Only
99All as per item No. 98 above but for 100 mm bore4.00EACH JOB10.0000Excess(+)1Full ConversionINR0.000.00INR Zero Only
100All as per item No. 98 above but for 80 mm bore2.00EACH JOB10.0000Excess(+)1Full ConversionINR0.000.00INR Zero Only
101Supply and installation with testing complete of digital water level indication device operating on single phase supply direct display in 19 mm size (letter display) digit system in meter/CM of water of overhead tank ensuring alarm while water fall or rise over predetermined limits with the following description complete all as specified and as directed by Engineer-in-charge including dismantling old unserviceable water level indicator. (a) The entire unit must operate through a compact electronic circuit which must ensure reliable operation at 230V +10% at 50 Hz +5%, with reliable in display and alarm at low and high level head tank. (b) One circuit must be housed in high impact polystyrne molded box nylon mlded connection strips. The level system must resistance transducer, while unattested by corrosion and other contents avilable in water the product must be controlled by Micro switch. (c) The whole unit must electronically contolled and the upper level and lower level indications must be in two parts. Each complete part must be fitted in MS CRS sheet box separetaly. One must be installed at over head tank and second at pump house with proper powder coating paint with locking arrangements.1.00EACH JOB10.0000Excess(+)1Full ConversionINR0.000.00INR Zero Only
102M&L for testing 03/04 core copper conductor PVC insulated heavy duty unsheathed cable 1100 volts grade 0.5 Sqmm from control box to display meter in ducts/on ground/through existing pipes etc including taking out unserviceable flexible cable all as specified and as directed.150.00RUNNING METRE10.0000Excess(+)1Full ConversionINR0.000.00INR Zero Only
103M&L in replacement of Mechnical joints with collar and flange bolt ,rubber washer, nuts and bolts as existing at site of the following sizes of CI/DI pipes :- 150 mm bore3.00EACH JOB10.0000Excess(+)1Full ConversionINR0.000.00INR Zero Only
104All as per item No. 103 above but for 100 mm bore 5.00EACH JOB10.0000Excess(+)1Full ConversionINR0.000.00INR Zero Only
105All as per item No. 103 above but for 80 mm bore3.00EACH JOB10.0000Excess(+)1Full ConversionINR0.000.00INR Zero Only
106Supply and fill liquid sodium hypochloride solution (99%) all as specified and directed.1350.00LITRES10.0000Excess(+)1Full ConversionINR0.000.00INR Zero Only
107Dewatering and pumping out of existing CCT / treated water tank at STP by using external sewage disposal pump set to near by sewage disposal drain and cleaning of tank by scrapping with wire brush or any other means of on walls and bottom of tank and removing the sludge/ slits/ sand/fungus etc deposited inside the sumps/ tanks with buckets and depositing where directed followed by cleaning with bleaching water solution and fresh water and finally applying one coat of snow cem on internal and external surfaces including writing "Tank Cleaned (date) and due date with 10Cm size white colour letter" on Black back ground on external walls complete all as specifoed and direted. 1.00EACH JOB10.0000Excess(+)1Full ConversionINR0.000.00INR Zero Only
108Dewatering and pumping out of existing accumulated sludge from SBR tank at STP by using external sewage disposal pump set to near by sewage disposal drain and cleaning of tank by scrapping with wire brush or any other means of on walls and bottom of tank and removing the sludge/ slits/ sand/fungus etc deposited inside the sumps/ tanks with buckets and depositing where directed followed by cleaning with bleaching water solution and fresh water and finally applying one coat of snow cem on internal and external surfaces including writing "Tank Cleaned (date) and due date with 10 Cm size white colour letter" on Black back ground on external walls complete all as specifoed and direted. 1.00EACH JOB10.0000Excess(+)1Full ConversionINR0.000.00INR Zero Only
109Dewatering and pumping out of existing accumulated sludge from Raw sewge sump at STP by using External Sewage disposal drain and cleaning of tank by scrapping with wire brush or any other means of on walls and bottom of tank and removing the sludge/ slits/ sand/fungus etc deposited inside the sumps/ tanks with buckets and depositing where directed followed by cleaning with bleaching water solution and fresh water and finally applying one coat of snow cem on internal and external surfaces including writing "Tank Cleaned (date) and due date with 10 Cm size white colour letter" on Black back ground on external walls complete all as specifoed and direted. Contd/---1101.00EACH JOB10.0000Excess(+)1Full ConversionINR0.000.00INR Zero Only
110Contd/---109 Note (For Item No.1 to 3) :- (i) Contractor is to arange own diesel pump T&P etc for cleaning purpose and minor spares and consumable like small screws washers cleaning agents consumable etc, cost of same shall be deemed to be included in quoted unit rate and including all safety precaution to be taken while working in STP. (ii) The accumulated/ deposied sludge after drying shall be disposed off out side the defence land to a distance excceding 1.5KM and not exceding 5.00 KM from the STP cost of which shall be deemed to inclusive in the quoted rate and nothing extra shall be paid on this account. (iii) Before commencement of work necessary arangement for disposal of sewage/ sludge be made and work to be caried out in fast pace by developing more man power at STP in Order to complete the work at the earliest. (iv) cleaning of sludge shall be carried out 2 times with interval of the 6 month each cleaning shall be measured as one each job.
111M&L for cleaning of Activated Carbon Filter of any size by manualy or mechanical and refilled all the material upto desired level all as directed by engr-in-charge.1.00EACH JOB10.0000Excess(+)1Full ConversionINR0.000.00INR Zero Only
112M&L for cleaning of Dual Activated Filter of any size by manualy or mechanical and refilled all the material upto desired level all as directed by engr-in-charge.1.00EACH JOB10.0000Excess(+)1Full ConversionINR0.000.00INR Zero Only
113M & L for removing the Submersible pump set from existing position shifting for authorised workshop for repair work dismantled/ open, removing the burnt winding cleaning of rotor/ stator rewinding the motor with 'F' class insulation super enameled cooper wire of size equivalent to the orignal winding insulated packing materials varshning drying incl replacement of both water seal compound both bearing fill with new etc reassambling the pump set installing back to the orignal position testing and comissioning on full load for 4 Hrs continous running for the capacity of motor upto 10 HP/7.5KW complete all as specified and directed.1.00EACH JOB10.0000Excess(+)1Full ConversionINR0.000.00INR Zero Only
114Disconnecting the electric cable from the terminal box of 5 to10HP motor, disconnecting the motor from them pump, remove the motor from the foundation bed and taking out the motor and transporting to authorised work shop and performing following works as specified and directed by Engr-in-Charge. (i) Dismantling the motor and taking out the burnt copper winding /fiber strip/insulating materials. (ii) Clean the stator slots by CTC solution and rewind on stator slots with super enamelled copper wire of existing gauge with insulating materials/fiber strip/varnishing and made terminal connection of fiber glass coated wire. (iii) Assembling the motor and painting with two coat of primer and one coat of synthetic enamel paint including marking flow of water and MES NO all as per norms and all as specified and as directed as directed by the engr-in-charge. (iv) Transporting to the motor to the site refixing on foundation channel with new bolts and nuts, coupling the pump and motor with correct alignment apply grease and connecting electrical connections testing complete alll as directed and specified by the Engr-in-charge. (v) Repair of Pumpset incl replacement of u/s parts i.e. impeller / bearing etc. Note: All the necessary sundry items required to complete the job for repair work is included in the unit rate quoted by the contractor.4.00JOB10.0000Excess(+)1Full ConversionINR0.000.00INR Zero Only
115S&F in replacement of sluice valve both side flanged and ISI marked (IS-780) of sluice valve cast iron body with S/S spindle and brass fly nuts, class PN-1.6 and cast iron hand wheel and joining with nut, bolt, washers and rubber insortion packing 6mm thick etc of following sizes:- 100 mm dia bore2.00EACH10.0000Excess(+)1Full ConversionINR0.000.00INR Zero Only
116Supply and fix CI butterfly valve of following size as per IS 13095, class PN -1.6 water type between flanges fittings gasket nuts bolts washers etc including taking up/ down of existing unserviceable butterfly valve of following sizes :- 50 mm bore 3.00EACH10.0000Excess(+)1Full ConversionINR0.000.00INR Zero Only
117All as per item No. 116 above but for 80 mm bore 2.00EACH10.0000Excess(+)1Full ConversionINR0.000.00INR Zero Only
118M&L compressor oil 320 grade complete to topup oil level upto desired level all as specified and directed.35.00LITRES10.0000Excess(+)1Full ConversionINR0.000.00INR Zero Only
119S & F in repair Air Blower Belt of suitable size for motor upto 7.5 HP capacity4.00EACH10.0000Excess(+)1Full ConversionINR0.000.00INR Zero Only
120Repair / replacement of Gear Box of sludge filter press including taking out old u/s parts complete1.00EACH JOB10.0000Excess(+)1Full ConversionINR0.000.00INR Zero Only
Total in Figures0.000.00INR Zero Only4Construction of chamber for 100mm sluice platesitem510Nos
Quoted Rate in FiguresSelect0.000.0000 Zero Only
Quoted Rate in WordsINR Zero OnlyINR Zero Only