Items - COMPREHENSIVE MAINT AND REPAIRIN POCKET No. 22 AT MIL STN JAISALMER UNDER GE (A) JAISALMER
| Item Rate BoQ | ||||||||||||||||||||||||||||||||||||||||||||||||||||||
| BoQ_Ver3.0 | Item Rate | Normal | INR Only | INR | ||||||||||||||||||||||||||||||||||||||||||||||||||
| Select, Excess (+), Less (-) | Less (-) | |||||||||||||||||||||||||||||||||||||||||||||||||||||
| Tender Inviting Authority: Commander Works Engineer (A) Jaisalmer | ||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Name of Work : COMPREHENSIVE MAINT AND REPAIR IN POCKET No. 22 AT MIL STN JAISALMER UNDER GE (A) JAISALMER. | ||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Contract No: CWE (A) /JSLR/ OF 2025-2026 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Name of the Bidder/ Bidding Firm / Company : | ||||||||||||||||||||||||||||||||||||||||||||||||||||||
| PRICE SCHEDULE (This BOQ template must not be modified/replaced by the bidder and the same should be uploaded after filling the relevent columns, else the bidder is liable to be rejected for this tender. Bidders are allowed to enter the Bidder Name and Values only ) | ||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Sl. No. | Item Description | Item Code / Make | Qty | Units | Estimated Rate in Rs. P | Addition / Deduction | Addition / Deduction Values | Currency Convertion against each Item | Quoted Currency in INR / Other Currency | BASIC RATE In Figures To be entered by the Bidder incl all taxes Rs. P | Excise Duty | VAT | Freight Charges ( Unloading & Stacking) | Any Other Taxes/Duties/Levies | Other Taxes 2 | IIIrd Party i.e DGS&D / RITES etc Inspection Charges @0.34%+Service Tax | Less for Cenvat Credit,if any respect of Supplies Under full Excise Duty Category | TOTAL AMOUNT in Rs. P | TOTAL AMOUNT With Taxes | TOTAL AMOUNT In Words | ||||||||||||||||||||||||||||||||||
| 1 | 2 | 3 | 3 | 4 | 6 | 7 | 8 | 9 | 10 | 11 | 12 | 5 | 14 | 15 | 16 | 17 | 18 | 19 | 20 | 21 | 22 | 23 | 24 | 25 | 26 | 27 | 28 | 29 | 30 | 31 | 32 | 33 | 34 | 35 | 36 | 37 | 38 | 39 | 40 | 41 | 42 | 43 | 44 | 45 | 46 | 47 | 48 | 49 | 50 | 51 | 52 | 6 | 54 | 7 |
| 1.00 | B&R.WORK Demolition of brick work or stone/boulder masonary built in cement mortor including all quoins, arches, pillars etc complete all as specified and as directed by the Engineer-in-Charge. | 40.00 | Cum | 99.00 | Excess(+) | 1 | Full Conversion | INR | 0.00 | 0.00 | INR Zero Only | |||||||||||||||||||||||||||||||||||||||||||
| 2.00 | M&L for squared rubble walling, Jodhpur type, brought upto courses, well bonded, bedded and solidly hearted, built in cement mortar (1:6) complete all as specified and as directed by the Engineer-in-Charge. | 15.00 | Cum | 99.00 | Excess(+) | 1 | Full Conversion | INR | 0.00 | 0.00 | INR Zero Only | |||||||||||||||||||||||||||||||||||||||||||
| 3.00 | Extra over stone walling for hammer dressing to face stones with maximum depression on face from straight edge not exc 20mm and dressing face beds and joints as specified to squared rubble walling, Jodhpur type brought upto courses complete all as specified and as directed by the Engineer-in-Charge. | 75.00 | Sqm | 99.00 | Excess(+) | 1 | Full Conversion | INR | 0.00 | 0.00 | INR Zero Only | |||||||||||||||||||||||||||||||||||||||||||
| 4.00 | M&L for precast cement concrete solid block masonry exc 10cm in width and setting in CM 1:6 type C1, 1:3:6 complete all as specified and as directed by the Engineer-in-Charge. | 25.00 | Cum | 99.00 | Excess(+) | 1 | Full Conversion | INR | 0.00 | 0.00 | INR Zero Only | |||||||||||||||||||||||||||||||||||||||||||
| 5.00 | Taking down cement plaster of any description, any thickness from external surfaces of walls/soffits etc. incl raking out joints, hacking for keys, scrubbibg down with water etc complete all as specified and as directed by the Engineer-in-Charge. | 950.00 | Sqm | 99.00 | Excess(+) | 1 | Full Conversion | INR | 0.00 | 0.00 | INR Zero Only | |||||||||||||||||||||||||||||||||||||||||||
| 6.00 | M&L for rendering 15 mm thick(in two layers-first layer 10MM thick with readymix plaster and outer layer 5 mm thick readymix waterproof plaster) on outer wall walls by adding potable water by weight of material as mentioned by manufacturer. ready-mix plaster shall complies with IS 1661-1972, IS 2250-1981, IS 2402-1963 and shall confirms the Compressive strength @ 28 Days- 10-15 Mpa/ Bulk density- 1600-1800 Kg/m3 and pull out bond strength->0.5MPA complete all as specified and as directed by the Engineer-in-Charge. Note : The rate quoted by contractor shall include cleaning of surface, application as per instruction and scaffolding upto 20MTR height. | 375.00 | Sqm | 99.00 | Excess(+) | 1 | Full Conversion | INR | 0.00 | 0.00 | INR Zero Only | |||||||||||||||||||||||||||||||||||||||||||
| 7.00 | M&L for rendering 10 mm thick readymade plaster on internal walls by adding potable water by weight of material as mentioned by manufacturer. Ready-mix plaster shall complies with IS 1661-1972, IS 2250-1981, IS 2402-1963 and shall confirms the Compressive strength @ 28 Days- 10-15 Mpa/ Bulk density- 1600-1800 Kg/m3 and pull out bond strength->0.5MPA complete all as specified and as directed by the Engineer-in-Charge. | 566.67 | Sqm | 99.00 | Excess(+) | 1 | Full Conversion | INR | 0.00 | 0.00 | INR Zero Only | |||||||||||||||||||||||||||||||||||||||||||
| 8.00 | M&L for rendering 5 mm thick readymix self curing plaster on ceiling by by adding potable water by weight of material as mentioned by manufacturer. Ready-mix plaster shall complies with IS 1661-1972, IS 2250-1981, IS 2402-1963 and shall confirms the Compressive strength @ 28 Days- 10-15 Mpa/ Bulk density- 1600-1800 Kg/m3 and pull out bond strength->0.5MPA complete all as specified and as directed by the Engineer-in-Charge. | 250.00 | Sqm | 99.00 | Excess(+) | 1 | Full Conversion | INR | 0.00 | 0.00 | INR Zero Only | |||||||||||||||||||||||||||||||||||||||||||
| 9.00 | M&L for Applying 1mm thick wall care putty on wall for desired smoothness and levelling of surfaces in two or more layers) for receiving painting complete all as specified and as directed by the Engineer-in-Charge. | 566.67 | Sqm | 99.00 | Excess(+) | 1 | Full Conversion | INR | 0.00 | 0.00 | INR Zero Only | |||||||||||||||||||||||||||||||||||||||||||
| 10.00 | M&L for preparation of newly plastered surfaces and applying Material & Labour for applying Two or more coatsof 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces. complete all as specified and as directed by Engr-in-Charge. | 1020.00 | Sqm | 99.00 | Excess(+) | 1 | Full Conversion | INR | 0.00 | 0.00 | INR Zero Only | |||||||||||||||||||||||||||||||||||||||||||
| 11.00 | M&L for preparation of new plastered surfaces of wall distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50gms/litre, of approved manufacturer, of required shade and colour complete, as per manufacturer's pecification. Two or more coats on new work | 566.67 | Sqm | 99.00 | Excess(+) | 1 | Full Conversion | INR | 0.00 | 0.00 | INR Zero Only | |||||||||||||||||||||||||||||||||||||||||||
| 12.00 | M&L for prepration of new surface of ceiling and applying three coats of white wash on ceiling complete all as specified and as directed by the Engineer-in-Charge. | 250.00 | Sqm | 99.00 | Excess(+) | 1 | Full Conversion | INR | 0.00 | 0.00 | INR Zero Only | |||||||||||||||||||||||||||||||||||||||||||
| 13.00 | M&L for Chipping of slab/columns/ beams/chajjas /parapet /roof projection/ balcony/ staircase and removing loose mortar with chisel hammer without much impact on concrete surface, clean the surface by sand blasting the surface using river sand with minimum of 6 kg pressure at the nozzle or air blow by electric pressure blower by mechanical compressor, cleaning the exposed reinforcement with wire brushes etc and disposal of debris for all lead and lifts complete all as specified and as directed by the Engineer-in-Charge. Note :- Scaffolding/ temporary support structure required to support the members / structure during strengthening shall be include in this items | 645.00 | Sqm | 99.00 | Excess(+) | 1 | Full Conversion | INR | 0.00 | 0.00 | INR Zero Only | |||||||||||||||||||||||||||||||||||||||||||
| 14.00 | M&L for applying bond coat cum waterproofing on the prepared old surface of concrete/masonry to receive new polymer mortar/polymer modified mortar with two coats of Slurry- @ approximately 2- 2.5 m2 / litre depending on substrate porosity of Fosroc Nitobond SBR300 or equivalent Equivalent etc as per manufacturer specifications. Laying of reinstatement readymade plaster/polymer mortar shall be completed within the overlay time of bonding coat. This bond coat act as bonding agent between old and new concrete complete all as specified and as directed by the Engineer-in-Charge. Note :The rate quoted by contractor shall include cleaning of surface, application as per instruction and scaffolding upto 20mtr height. | 645.00 | Sqm | 99.00 | Excess(+) | 1 | Full Conversion | INR | 0.00 | 0.00 | INR Zero Only | |||||||||||||||||||||||||||||||||||||||||||
| 15.00 | M&L for applying to the damaged concrete portion of slab/columns/beams/chajjas/ parapet /roof projection/ balcony/ staircase with single component, fiber reinforced, dual shrinkage- compensated thixotropic, cementitious patch repair mortar Sika monotop 122F (having the technical parameters mentioned in material specifications) capable of applying up to 20-30 mm thick in double layer initially by hand and finishing with troweled carefully compacting the same around the rebar and finishing to bring it in line with existing concrete surface with an average specified thickness complete all as specified and as directed by the Engineer-in-Charge. Note :The rate quoted by contractor shall include cleaning of surface, application as per instruction and scaffolding upto 20mtr height. | 645.00 | Sqm | 99.00 | Excess(+) | 1 | Full Conversion | INR | 0.00 | 0.00 | INR Zero Only | |||||||||||||||||||||||||||||||||||||||||||
| 16.00 | Taking down chowkhats or frames (without taking off shutters from the frame) exc 1.5 Sqm and n. exc 4.00 Sqm incl cutting holes and making good reqd shape for hold fast block for new frame complete all as specified and as directed by the Engineer-in-Charge. | 2.00 | Each | 99.00 | Excess(+) | 1 | Full Conversion | INR | 0.00 | 0.00 | INR Zero Only | |||||||||||||||||||||||||||||||||||||||||||
| 17.00 | S&F Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 45 x 70 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete all as specified and as directed by the Engineer-in-Charge. Note: (i) For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extrapayment on this account shall be made. (ii) M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately | 10.00 | RM | 99.00 | Excess(+) | 1 | Full Conversion | INR | 0.00 | 0.00 | INR Zero Only | |||||||||||||||||||||||||||||||||||||||||||
| 18.00 | S&F 30mm thick Factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk, S.S screws, complete all as specified and as directed by the Engineer-in-Charge and also including following items supply and fixing in the door at site as per specification :- (a) Stainless Steel (304 Grade) Finished Butt Hinges 125mm - 3 Nos per leaf (b) Stainless Steel (304 Grade) Finished Tower Bolt 200mm long - 2 Nos per leaf (c) Stainless Steel (304 Grade) Finished Handles 200 mm - 2 Nos per leaf Note :- The cost of SS butt hinges, SS tower bolt and SS handles shall be deemed to be inclusive in the unit quoted rates. | 4.00 | Sqm | 99.00 | Excess(+) | 1 | Full Conversion | INR | 0.00 | 0.00 | INR Zero Only | |||||||||||||||||||||||||||||||||||||||||||
| 19.00 | Hacking out old broken glass (any size, quality or description) from metal frames, glazing with putting or beads and S&F 3mm thick sheet glass, ordinary quality and glazing with oil putty in square n exc 0.5 Sqm.m in each pane complete all as specified and as directed by the Engineer-in-Charge. | 120.00 | Sqm | 99.00 | Excess(+) | 1 | Full Conversion | INR | 0.00 | 0.00 | INR Zero Only | |||||||||||||||||||||||||||||||||||||||||||
| 20.00 | Demolition of cement concrete (unreinforeced) in ground floors and pavings n. exc 15cm thickness (below or above ground level) complete all as specified and as directed by the Engineer-in-Charge. | 36.00 | Cum | 99.00 | Excess(+) | 1 | Full Conversion | INR | 0.00 | 0.00 | INR Zero Only | |||||||||||||||||||||||||||||||||||||||||||
| 21.00 | M&L for 25mm thick PCC (1:2:4) type B-0 using 12.5mm graded stone aggregate as in sub base of floors complete all as specified and as directed by the Engineer-in-Charge. | 475.00 | Sqm | 99.00 | Excess(+) | 1 | Full Conversion | INR | 0.00 | 0.00 | INR Zero Only | |||||||||||||||||||||||||||||||||||||||||||
| 22.00 | Dismantling floor, hearth or wall tiles, including cement mortar, removing serviceable tiles from site & rubbish off the premises complete all as specified and as directed by the Engineer-in-Charge. | 1554.00 | Sqm | 99.00 | Excess(+) | 1 | Full Conversion | INR | 0.00 | 0.00 | INR Zero Only | |||||||||||||||||||||||||||||||||||||||||||
| 23.00 | M&L for glazed vitrified tiles 8-10mm thick (square / rectangular ) polished, area of each tiles exc 0.36 Sqm not exceeding 0.72 Sqm, in floor etc set and jointed in neat cment slurry and pointed in white or coloured cement to match including screed bed 15mm thick in CM 1:6 complete all as specified and as directed by the Engineer-in-Charge. | 475.00 | Sqm | 99.00 | Excess(+) | 1 | Full Conversion | INR | 0.00 | 0.00 | INR Zero Only | |||||||||||||||||||||||||||||||||||||||||||
| 24.00 | M&L for 75mm thick cement concrete 1:4:8 type D-2 using 40mm graded stone aggregate as in sub base of flooring / hard standing complete all as specified and as directed by the Engineer-in-Charge. | 215.00 | Sqm | 99.00 | Excess(+) | 1 | Full Conversion | INR | 0.00 | 0.00 | INR Zero Only | |||||||||||||||||||||||||||||||||||||||||||
| 25.00 | M&L for ceramic out door tiles 400mmx400mmx10-12mm thick digital design set, jointed and pointed in neat cement slurry as in floors with grey cement over & including over screed bed or bedding layer of mortar 15 mm thick Cement Mortar 1:6 complete all as specified and as directed by the Engineer-in-Charge. Note : Work will be in patches or in bulk | 100.00 | Sqm | 99.00 | Excess(+) | 1 | Full Conversion | INR | 0.00 | 0.00 | INR Zero Only | |||||||||||||||||||||||||||||||||||||||||||
| 26.00 | M&L for Chequered cement concrete tiles 20cm x 20cm x 25mm thick,rubber moulded set and jointed in neat cement slurry and pointed in white or coloured cement to match including screed bed or bedding layer of mortar 15 mm thick in cement mortar 1:6 for laying floor finishes complete all as specified and as directed by the Engineer-in-Charge. | 115.00 | Sqm | 99.00 | Excess(+) | 1 | Full Conversion | INR | 0.00 | 0.00 | INR Zero Only | |||||||||||||||||||||||||||||||||||||||||||
| 27.00 | M&L for glazed vitrified tiles 8-10mm thick (square / rectangular ) polished, area of each tiles exc 0.36 Sqm not exceeding 0.72 Sqm, in vertical surfaces such as skirting, dados etc set and jointed in neat cement slurry and pointed in white or coloured cement to match including screed plaster 10mm thick in CM 1:4 complete all as specified and as directed by the Engineer-in-Charge. | 45.00 | Sqm | 99.00 | Excess(+) | 1 | Full Conversion | INR | 0.00 | 0.00 | INR Zero Only | |||||||||||||||||||||||||||||||||||||||||||
| 28.00 | M&L Glazed ceramic coloured tiles 7 to 8 mm thick in vertical surfaces area of each tile of exc. 0.11 Sqm and but not exc. 0.18 Sqm set and jointed in neat cement slurry and pointed in white or colour cement to match over and including 10mm thick screed plaster in cement mortar 1:4 complete all as specified and as directed by the Engineer-in-Charge. | 225.00 | Sqm | 99.00 | Excess(+) | 1 | Full Conversion | INR | 0.00 | 0.00 | INR Zero Only | |||||||||||||||||||||||||||||||||||||||||||
| 29.00 | M&L for Non-skid ceramic premium quality coloured tiles 7 to 8 mm thick area of each tile exceeding 0.36 sqm but not exceeding 0.72 sqm, in floors etc. in any pattern of light & dark tiles as approved, set and jointed in neat cement slurry and pointed in white or coloured cement to match, in floors etc. over & including 15 mm thick screed in cement mortar (1:6) over and pointed in white cement with pigment to match the colour of tiles complete all as specified and as directed by the Engineer-in-Charge. | 540.00 | Sqm | 99.00 | Excess(+) | 1 | Full Conversion | INR | 0.00 | 0.00 | INR Zero Only | |||||||||||||||||||||||||||||||||||||||||||
| 30.00 | All as per item No. 29.00 here-in-before above but in skirting over 10mm thick screeding in cement mortar 1:4 complete all as specified and as directed by the Engineer-in-Charge. | 54.00 | Sqm | 99.00 | Excess(+) | 1 | Full Conversion | INR | 0.00 | 0.00 | INR Zero Only | |||||||||||||||||||||||||||||||||||||||||||
| 31.00 | Demolition of Stone slabs and tiles of any description or thickness in floors, aprons etc. laid bedded and pointed in any mortar complete all as specified and as directed by the Engineer-in-Charge. Note : Work will be in patches or in bulk | 9.00 | Xsqm | 99.00 | Excess(+) | 1 | Full Conversion | INR | 0.00 | 0.00 | INR Zero Only | |||||||||||||||||||||||||||||||||||||||||||
| 32.00 | M&L for Granite of Z black / imperial red (colour as approved by Accepting Officer) of any type machine cut as in shelves/steps/counter tops, 16-18 mm thick, set and jointed in cement slurry over & including screed or 15 mm thick rendering in cement mortar (1:4) and pointed in cement mixed with pigment to match the shade of slab or with suitable adhesive for fixing on unpolished kota stone slabs and including rubbing, cutting and mirror type polishing and bull nose on exposed sides complete all as specified and as directed by the Engineer-in-Charge. Note : Single piece should be used in steps/cills/jambs/shelves. | 90.00 | Sqm | 99.00 | Excess(+) | 1 | Full Conversion | INR | 0.00 | 0.00 | INR Zero Only | |||||||||||||||||||||||||||||||||||||||||||
| 33.00 | Dismantling wrought iron or mild steel work of any description not othervise provided for complete all as specified and as directed by the Engineer-in-Charge. | 1.80 | Qtl | 99.00 | Excess(+) | 1 | Full Conversion | INR | 0.00 | 0.00 | INR Zero Only | |||||||||||||||||||||||||||||||||||||||||||
| 34.00 | S&F MS hollow rectangular/square/circular tubes/pipes of (IS-1161-1979 grade SI-240) as in frame work for roofs/rafters/purlins/chajjas/trusses/ columns/ struts etc and like similar items etc complete all as specified and as directed by the Engineer-in-Charge. | 80.00 | Kg | 99.00 | Excess(+) | 1 | Full Conversion | INR | 0.00 | 0.00 | INR Zero Only | |||||||||||||||||||||||||||||||||||||||||||
| 35.00 | M&L for rolled mild steel work as in door frame (chowkhats) including provn of 10mm dia deformed bar welded horizontally to bottom of frame conforming to Fe-290 (Gde 165-E) including preparing back of chowkhat and applying two coats tar and sanding newly tarred surfaces with clean sharp sand complete all as specified and as directed by the Engineer-in-Charge. | 100.00 | Kg | 99.00 | Excess(+) | 1 | Full Conversion | INR | 0.00 | 0.00 | INR Zero Only | |||||||||||||||||||||||||||||||||||||||||||
| 36.00 | S&F Mild steel hold fasts fixed with MS screws, all conforming to Fe-410-0 complete all as specified and as directed by the Engineer-in-Charge. | 20.00 | Kg | 99.00 | Excess(+) | 1 | Full Conversion | INR | 0.00 | 0.00 | INR Zero Only | |||||||||||||||||||||||||||||||||||||||||||
| 37.00 | Raking out joint /pointing to random rubble or polygonal rubble stone masonary uncoursed or brought upto courses built in cement mortar and M&L for raised pointing in cement mortar (1:4) complete all as specified and as directed by the Engineer-in-Charge. | 20.00 | X Sqm | 99.00 | Excess(+) | 1 | Full Conversion | INR | 0.00 | 0.00 | INR Zero Only | |||||||||||||||||||||||||||||||||||||||||||
| 38.00 | Taking down shutters of any description exc 1.00 sqm but n. exc 2.00 sqm of each shutter and refixing in the same opening after necessary resecuring or easing & adjusting etccomplete all as specified and as directed by the Engineer-in-Charge. | 50.00 | Per Leaf | 99.00 | Excess(+) | 1 | Full Conversion | INR | 0.00 | 0.00 | INR Zero Only | |||||||||||||||||||||||||||||||||||||||||||
| 39.00 | Taking down shutters of any description exc 2.00 sqm of each shutter and refixing in the same opening after necessary resecuring or easing & adjusting etc complete all as specified and as directed by the Engineer-in-Charge. | 60.00 | Per Leaf | 99.00 | Excess(+) | 1 | Full Conversion | INR | 0.00 | 0.00 | INR Zero Only | |||||||||||||||||||||||||||||||||||||||||||
| 40.00 | Taking down chowkhats or frames (without taking off shutters from the frame) n. exc 1.5 Sqm incl cutting holes and making good reqd shape for hold fast block for new frame complete all as specified and as directed by the Engineer-in-Charge. | 4.00 | Each | 99.00 | Excess(+) | 1 | Full Conversion | INR | 0.00 | 0.00 | INR Zero Only | |||||||||||||||||||||||||||||||||||||||||||
| 41.00 | S&F solid PVC door frames of size 50x47mm made out of 5mm plain colour PVC sheet supplying and fixing in opening as per specification and drawing shown in SSR complete all as specified and as directed by the Engineer-in-Charge. | 18.00 | RM | 99.00 | Excess(+) | 1 | Full Conversion | INR | 0.00 | 0.00 | INR Zero Only | |||||||||||||||||||||||||||||||||||||||||||
| 42.00 | S&F factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, complete all as specified and as directed by the Engineer-in-Charge and also including following items supply and fixing in the door at site as per specification :- (a) Stainless Steel (304 Grade) Finished Butt Hinges 125mm - 3 Nos per leaf (b) Stainless Steel (304 Grade) Finished Tower Bolt 200mm long - 2 Nos per leaf (c) Stainless Steel (304 Grade) Finished Handles 200 mm - 2 Nos per leaf Note :- The cost of SS butt hinges, SS tower bolt and SS handles shall be deemed to be inclusive in the unit quoted rate. | 4.94 | Sqm | 99.00 | Excess(+) | 1 | Full Conversion | INR | 0.00 | 0.00 | INR Zero Only | |||||||||||||||||||||||||||||||||||||||||||
| 43.00 | Dismantling boarding of any description fixed in any position with nails complete all as specified and as directed by the Engineer-in-Charge. | 125.00 | SQM | 99.00 | Excess(+) | 1 | Full Conversion | INR | 0.00 | 0.00 | INR Zero Only | |||||||||||||||||||||||||||||||||||||||||||
| 44.00 | S&F factory made 18mm thick both side laminated HDHMR board in Cupboard made of minifix joint with 1mm same colour edge banding including fixed with nut, screws and washers fevicol, nails complete all as specified and as directed by the Engineer-in-Charge. | 100.00 | SQM | 99.00 | Excess(+) | 1 | Full Conversion | INR | 0.00 | 0.00 | INR Zero Only | |||||||||||||||||||||||||||||||||||||||||||
| 45.00 | S&F factory made 12mm thick both side laminated HDHMR board in Cupboard made of minifix joint with 1mm same colour edge banding including fixed with nut, screws and washers fevicol, nails complete all as specified and as directed by the Engineer-in-Charge. | 25.00 | SQM | 99.00 | Excess(+) | 1 | Full Conversion | INR | 0.00 | 0.00 | INR Zero Only | |||||||||||||||||||||||||||||||||||||||||||
| 46.00 | S&F powder coated stainless steel SS 304 sensys intergrated soft cose hinges of size 103x64mm finish of nicle/silver complete all as specified and as directed by the Engineer-in-Charge. | 50.00 | EACH | 99.00 | Excess(+) | 1 | Full Conversion | INR | 0.00 | 0.00 | INR Zero Only | |||||||||||||||||||||||||||||||||||||||||||
| 47.00 | S&F powder coated stainless steel cabinet / drawers handle grade SS 304 having a length of 250mm and any shape complete all as specified and as directed by the Engineer-in-Charge. | 100.00 | EACH | 99.00 | Excess(+) | 1 | Full Conversion | INR | 0.00 | 0.00 | INR Zero Only | |||||||||||||||||||||||||||||||||||||||||||
| 48.00 | S&F powder coated stainless steel drawer/ basket channel grade SS 304 size 50cm complete all as specified and as directed by the Engineer-in-Charge. | 10.00 | PAIR | 99.00 | Excess(+) | 1 | Full Conversion | INR | 0.00 | 0.00 | INR Zero Only | |||||||||||||||||||||||||||||||||||||||||||
| 49.00 | S&F in repair stainless steel tubing of 25 mm dia chromium plated min. 1.0 mm wall thickness as in curtain rod and including 02 Nos stainless steel brackets/finials fency type, stops fixed with ss screws etc complete all as specified and as directed by the Engineer-in-Charge. Note : For the purpose of mesurement and payment running length of curtain rod only shall be considered. | 400.00 | RM | 99.00 | Excess(+) | 1 | Full Conversion | INR | 0.00 | 0.00 | INR Zero Only | |||||||||||||||||||||||||||||||||||||||||||
| 50.00 | Dismantling of existing unserviceable RCC/PVC water tank and S&F 500 litre capacity rotational moulded polythene water storage tanks double layer (cylindrical vertical with closed top) hoisted & fixed in position complete all as specified and as directed by the Engineer-in-Charge. | 8.00 | Each | 99.00 | Excess(+) | 1 | Full Conversion | INR | 0.00 | 0.00 | INR Zero Only | |||||||||||||||||||||||||||||||||||||||||||
| 51.00 | Dismantling of existing unserviceable RCC/PVC water tank and S&F 1000 litre capacity rotational moulded polythene water storage tanks double layer (cylindrical vertical with closed top) hoisted & fixed in position complete all as specified and as directed by the Engineer-in-Charge. | 80.00 | Each | 99.00 | Excess(+) | 1 | Full Conversion | INR | 0.00 | 0.00 | INR Zero Only | |||||||||||||||||||||||||||||||||||||||||||
| 52.00 | S&F in repair Vitreous china squatting pan of Orissa patten size 580 x 440 white colour including CI S/P trap long size as directed joint run and lead front or back inlet with integral footrest including connection to trap and to flushing pipe,anti-syphonage pipe, etc, fixed in repair complete and making good to floor in PCC 1:2:4 type B 1 using 20mm graded stone agregate complete all as specified and as directed by the Engineer-in-Charge. | 20.00 | Each | 99.00 | Excess(+) | 1 | Full Conversion | INR | 0.00 | 0.00 | INR Zero Only | |||||||||||||||||||||||||||||||||||||||||||
| 53.00 | S&F in repair vitreous china wash down water closet pedestal pattern pan white with trap including connection to existing out joint pipe, flushing pipe or Cistern, antisyphonage pipe, including making, etc complete including making good to floor etc complete all as specified and as directed by the Engineer-in-Charge. | 10.00 | Each | 99.00 | Excess(+) | 1 | Full Conversion | INR | 0.00 | 0.00 | INR Zero Only | |||||||||||||||||||||||||||||||||||||||||||
| 54.00 | S&F in repair wash hand basins, vitreous china,of size 550x400mm (flat back, or angle back type) including cutting for and pinning in ends of brackets or erecting stand inclusive of fixing of supply and including waste pipe etc complete all as specified and as directed by the Engineer-in-Charge. | 20.00 | Each | 99.00 | Excess(+) | 1 | Full Conversion | INR | 0.00 | 0.00 | INR Zero Only | |||||||||||||||||||||||||||||||||||||||||||
| 55.00 | Demolition of cement concrete of any description from sunken floor (ground or Ist floor) and removing and depositing materials exc 50 mtrs depositing level n exc. 1.5 m aove the starting point complete all as specified and as directed by the Engineer-in-Charge. | 6.00 | Cum | 99.00 | Excess(+) | 1 | Full Conversion | INR | 0.00 | 0.00 | INR Zero Only | |||||||||||||||||||||||||||||||||||||||||||
| 56.00 | M&L for mass concrete filling using PCC (1:5:10) type E-2 as in sunken floor complete all as specified and as directed by the Engineer-in-Charge. | 6.00 | Cum | 99.00 | Excess(+) | 1 | Full Conversion | INR | 0.00 | 0.00 | INR Zero Only | |||||||||||||||||||||||||||||||||||||||||||
| 57.00 | M&L for PCC (1:3:6) type C-1 using 20mm graded stone aggregate, 50mm thick as in plinth protection finished fair & even in alternative bays n. exc 2M in length and joints filled with butmen mastic 1:3 (1 Bitumen : 3 Sand) complete all as specified and as directed by the Engineer-in-Charge. | 160.00 | Sqm | 99.00 | Excess(+) | 1 | Full Conversion | INR | 0.00 | 0.00 | INR Zero Only | |||||||||||||||||||||||||||||||||||||||||||
| 58.00 | M&L for applying Pitch Free PU based Liquid applied single component elastomeric seamless, water and vapor proof membrane system Nitoproof 600PF for concrete @ 2.50 kg/m2 (2 coats). Typical applications will include roofs, podiums, balconies, floor slabs, suspended floors, patios, bathrooms, inspection pits, swimming pools, bridge decks, Conforming Tensile Strength (2N/mm2 ) (ASTM D412) / Tear resistance (15 kN/m) (ASTM D624-00 and Crack bridging (ASTM C836 / ASTM C1305 modified)2mm. After 72 hours of curing, flood test can be carried out to a minimum depth of 50mm of water for 24 hours. Drains shall be plugged and barriers placed to contain the water complete all as specified and as directed by the Engineer-in-Charge. Note : All above operations to be done in presence of auth applicator in order. | 160.00 | Sqm | 99.00 | Excess(+) | 1 | Full Conversion | INR | 0.00 | 0.00 | INR Zero Only | |||||||||||||||||||||||||||||||||||||||||||
| 59.00 | Dismantling and and taking down flushing cistern of any description/size and S&F flushing cistern of PVC 10 ltr. cap. with dual flushing system, valveless syphonic action type, , low level, white/ivory/off white with inlet, ball valve, float and including brackets and connection to pipe etc. and including all necessary accessories like rag bolts/gel gasket etc as recommended by manufacturer for fixing, packing complete all as specified and as directed by the Engineer-in-Charge. | 100.00 | Each | 99.00 | Excess(+) | 1 | Full Conversion | INR | 0.00 | 0.00 | INR Zero Only | |||||||||||||||||||||||||||||||||||||||||||
| 60.00 | S&F in repair PVC flush pipe bend 32mm dia with two nos check nuts for connecting low level flushing cistern to European type WC or IWC including all joints complete all as specified and as directed by the Engineer-in-Charge. | 150.00 | Each | 99.00 | Excess(+) | 1 | Full Conversion | INR | 0.00 | 0.00 | INR Zero Only | |||||||||||||||||||||||||||||||||||||||||||
| 61.00 | S&F in repair CP brass shower rose with or without swivel joints 100mm size including fixing to steel pipe or union complete all as specified and as directed by the Engineer-in-Charge. | 100.00 | Each | 99.00 | Excess(+) | 1 | Full Conversion | INR | 0.00 | 0.00 | INR Zero Only | |||||||||||||||||||||||||||||||||||||||||||
| 62.00 | S&F in repair PVC connections 15mm size with PTMT nuts and bolts of length 450mm etc complete all as specified and as directed by the Engineer-in-Charge. | 250.00 | Each | 99.00 | Excess(+) | 1 | Full Conversion | INR | 0.00 | 0.00 | INR Zero Only | |||||||||||||||||||||||||||||||||||||||||||
| 63.00 | S&F in repair pillar tap, cast copper alloy fency type chromium plated screwed down high, pressure with or without lettered Hot or Cold with long screwed shanks and fly nuts screwed for iron pipe and fixed to 15mm bore of pipe complete all as specified and as directed by the Engineer-in-Charge. | 112.00 | Each | 99.00 | Excess(+) | 1 | Full Conversion | INR | 0.00 | 0.00 | INR Zero Only | |||||||||||||||||||||||||||||||||||||||||||
| 64.00 | S&F in repair angle valves 15mm bore , cast copper alloy chromium plated fancy type, screwed down high pressure screwed both ends for iron pipe or for unions and fixed etc complete all as specified and as directed by the Engineer-in-Charge. | 40.00 | Each | 99.00 | Excess(+) | 1 | Full Conversion | INR | 0.00 | 0.00 | INR Zero Only | |||||||||||||||||||||||||||||||||||||||||||
| 65.00 | S&F in repair 15mm bore Brass CP kitchen sink mixer for mixing hot & Cold water screwed down for iron pipe complete all as specified and as directed by the Engineer-in-Charge. | 2.00 | EACH | 99.00 | Excess(+) | 1 | Full Conversion | INR | 0.00 | 0.00 | INR Zero Only | |||||||||||||||||||||||||||||||||||||||||||
| 66.00 | S&F in repair 32mm dia PTMT waste pipe suitable for WHB or Sinks etc complete all as specified and as directed by the Engineer-in-Charge. | 100.00 | Each | 99.00 | Excess(+) | 1 | Full Conversion | INR | 0.00 | 0.00 | INR Zero Only | |||||||||||||||||||||||||||||||||||||||||||
| 67.00 | S&F in repair SS grating square/round 150x150mm size as per required shaped cera cat No CP134 with cocroach trap for floor trap fixed in position complete all as specified and as directed by the Engineer-in-Charge. | 110.00 | Each | 99.00 | Excess(+) | 1 | Full Conversion | INR | 0.00 | 0.00 | INR Zero Only | |||||||||||||||||||||||||||||||||||||||||||
| 68.00 | S&F in repair bib tap standard of PTMT 15mm bore of any colour screwed for iron pipe and fixed complete all as specified and as directed by the Engineer-in-Charge. | 150.00 | Each | 99.00 | Excess(+) | 1 | Full Conversion | INR | 0.00 | 0.00 | INR Zero Only | |||||||||||||||||||||||||||||||||||||||||||
| 69.00 | S&F in repair plastic water closet seat cover any colour closed pattern with flat bottom and cover with mild steel chromium plated hinging device etc complete all as specified and as directed by the Engineer-in-Charge. | 50.00 | Each | 99.00 | Excess(+) | 1 | Full Conversion | INR | 0.00 | 0.00 | INR Zero Only | |||||||||||||||||||||||||||||||||||||||||||
| 70.00 | S&F in repair sinks with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes; in-cluding bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connect-ing union to rigid UPVC waste pipe bent to shape & fixed to wall with bracket overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm complete all as specified and as directed by the Engineer-in-Charge. | 2.00 | EACH | 99.00 | Excess(+) | 1 | Full Conversion | INR | 0.00 | 0.00 | INR Zero Only | |||||||||||||||||||||||||||||||||||||||||||
| 71.00 | S&F in repair stainless steel sink made out of 1.00mm thick sheet for kitchen or laboratory with plug,washers, waste pipe, cast irn cantilever bracket of 495mm x 420mm bowl size 410mm x 330mm x 160mm complete all as specified and as directed by the Engineer-in-Charge. | 10.00 | EACH | 99.00 | Excess(+) | 1 | Full Conversion | INR | 0.00 | 0.00 | INR Zero Only | |||||||||||||||||||||||||||||||||||||||||||
| 72.00 | S&F in repair stainless steel plate rack of 600X750X250mm fixed to wall complete all as specified and as directed by the Engineer-in-Charge. | 20.00 | Each | 99.00 | Excess(+) | 1 | Full Conversion | INR | 0.00 | 0.00 | INR Zero Only | |||||||||||||||||||||||||||||||||||||||||||
| 73.00 | S&F in repair waste coupling CP 32mm dia for glazed ware basins etc with long screwed shanks and fly nuts flanged etc complete all as specified and as directed by the Engineer-in-Charge. | 50.00 | Each | 99.00 | Excess(+) | 1 | Full Conversion | INR | 0.00 | 0.00 | INR Zero Only | |||||||||||||||||||||||||||||||||||||||||||
| 74.00 | S&F in repair waste coupling CP 40 mm dia for sink etc with long screwed shanks and fly nuts flanged etc complete all as specified and as directed by the Engineer-in-Charge. | 224.00 | Each | 99.00 | Excess(+) | 1 | Full Conversion | INR | 0.00 | 0.00 | INR Zero Only | |||||||||||||||||||||||||||||||||||||||||||
| 75.00 | S&F in repair 15mm bore cast copper alloy chromium plated bib tap fancy type with crutch or butterfly handle, screwed down, screwed for iron pipe complete all as specified and as directed by the Engineer-in-Charge. | 100.00 | Each | 99.00 | Excess(+) | 1 | Full Conversion | INR | 0.00 | 0.00 | INR Zero Only | |||||||||||||||||||||||||||||||||||||||||||
| 76.00 | S&F in repair PVC (SWR) floor trap plain with grating incl jointing with solvent cement of 75mm dia complete all as specified and as directed by the Engineer-in-Charge. | 10.00 | Each | 99.00 | Excess(+) | 1 | Full Conversion | INR | 0.00 | 0.00 | INR Zero Only | |||||||||||||||||||||||||||||||||||||||||||
| 77.00 | Taking out old u/s mirror & S&F mirror of size 600mm x 450mm x 5.5mm bevelled edge of selected quality of PVC /auminium moulded frames and back with fixing arragnement to wall complete all as specified and as directed by the Engineer-in-Charge. | 200.00 | Each | 99.00 | Excess(+) | 1 | Full Conversion | INR | 0.00 | 0.00 | INR Zero Only | |||||||||||||||||||||||||||||||||||||||||||
| 78.00 | S&F in repair Towel Ring of PTMT fixed with and including Chromium plated brass screws and wooden/plastic cleats (Minimum weight 90gms) complete all as specified and as directed by the Engineer-in-Charge. | 224.00 | Each | 99.00 | Excess(+) | 1 | Full Conversion | INR | 0.00 | 0.00 | INR Zero Only | |||||||||||||||||||||||||||||||||||||||||||
| 79.00 | S&F in repair tubular towel rail, chromium plated brass 20mm dia 'D' type 60CM long between flanges complete all as specified and as directed by the Engineer-in-Charge. | 224.00 | Each | 99.00 | Excess(+) | 1 | Full Conversion | INR | 0.00 | 0.00 | INR Zero Only | |||||||||||||||||||||||||||||||||||||||||||
| 80.00 | S&F in repair stainless steel towel rack with lower hanger size 24'' (600 mm) fixed to walls with hook complete all as specified and as directed by the Engineer-in-Charge. Make :- Cera cat No F500110 or quivalent model of Jaquar/ Hindware/ Cera/ Prayag/ Parryware as approved by GE. | 102.00 | Each | 99.00 | Excess(+) | 1 | Full Conversion | INR | 0.00 | 0.00 | INR Zero Only | |||||||||||||||||||||||||||||||||||||||||||
| 81.00 | S&F in repair Glass shelf size 600 mm long and including bracket and glass complete set etc. complete all as specified and as directed by the Engineer-in-Charge. Make :- Cera cat No F5001114 or quivalent model of Jaquar/ Hindware/ Cera/ Prayag/ Parryware as approved by GE. | 150.00 | Each | 99.00 | Excess(+) | 1 | Full Conversion | INR | 0.00 | 0.00 | INR Zero Only | |||||||||||||||||||||||||||||||||||||||||||
| 82.00 | S&F in repair corner glass shelf size 300 mm radius and including bracket and glass complete set etc complete all as specified and as directed by the Engineer-in-Charge. Make :- Cera cat No F50051303 or quivalent model of Jaquar/ Hindware/ Cera/ Prayag/ Parryware as approved by GE. | 150.00 | Each | 99.00 | Excess(+) | 1 | Full Conversion | INR | 0.00 | 0.00 | INR Zero Only | |||||||||||||||||||||||||||||||||||||||||||
| 83.00 | S&F in repair chromium plated shower rose 125mm round shape fancy type fixed to 15mm bore pipe complete all as specified and as directed by the Engineer-in-Charge. | 150.00 | Each | 99.00 | Excess(+) | 1 | Full Conversion | INR | 0.00 | 0.00 | INR Zero Only | |||||||||||||||||||||||||||||||||||||||||||
| 84.00 | S&F brass chromium plated Health faucet with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete all as specified and as directed by the Engineer-in-Charge. | 50.00 | Each | 99.00 | Excess(+) | 1 | Full Conversion | INR | 0.00 | 0.00 | INR Zero Only | |||||||||||||||||||||||||||||||||||||||||||
| 85.00 | S&F PVC mirror cabinet of size 300x450mm of selected quality glass fixed in PVC cabinet complete all as specified and as directed by the Engineer-in-Charge. Make :- Prayag cat No MC-10001 or equivalent model of Hindware/ Prayag/ Parryware as approved by GE. | 20.00 | Each | 99.00 | Excess(+) | 1 | Full Conversion | INR | 0.00 | 0.00 | INR Zero Only | |||||||||||||||||||||||||||||||||||||||||||
| 86.00 | S&F in repairs 15mm dia Bib tap (2 in 1 type) brass type, chromium plated fancy type glossy finish fixed to wall complete all as specified and as directed by the Engineer-in-Charge. Make :- model No BC-9876 of brass, cera cat No F-1015163 or equivalent model of Jaquar/ Hindware/ Cera/ Prayag/ Parryware as approved by GE. | 80.00 | Each | 99.00 | Excess(+) | 1 | Full Conversion | INR | 0.00 | 0.00 | INR Zero Only | |||||||||||||||||||||||||||||||||||||||||||
| 87.00 | S&F 15mm bore tubes medium grade galvanized with all fittings such as Tee, elbows, sockets, unions, plugs, short lenghts etc. and fixed complete to walls and ceilings or laid in floors concealed or open of any length including taking down or up existing GI tubing & connections complete all as specified and as directed by the Engineer-in-Charge. | 700.00 | RM | 99.00 | Excess(+) | 1 | Full Conversion | INR | 0.00 | 0.00 | INR Zero Only | |||||||||||||||||||||||||||||||||||||||||||
| 88.00 | S&F 20 mm bore tubes medium grade galvanized with all fitting such as Tee, elbows, sockets, unions, plugs, short lenghts etc and fixed complete to walls and ceilings or laid in floors of any length including taking down or up existing GI tubing & connections complete all as specified and as directed by the Engineer-in-Charge. | 100.00 | RM | 99.00 | Excess(+) | 1 | Full Conversion | INR | 0.00 | 0.00 | INR Zero Only | |||||||||||||||||||||||||||||||||||||||||||
| 89.00 | Supply only liquid water proofing compound complete all as specified and as directed by the Engineer-in-Charge. | 20.00 | Litre | 99.00 | Excess(+) | 1 | Full Conversion | INR | 0.00 | 0.00 | INR Zero Only | |||||||||||||||||||||||||||||||||||||||||||
| 90.00 | Taking down eaves gutters and rainwater pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks, etc., including cleaning or refixing or removal to Store (measured overall as fixed along the centre line over fittings and accessories complete all as specified and as directed by the Engineer-in-Charge. | 620.00 | RM | 99.00 | Excess(+) | 1 | Full Conversion | INR | 0.00 | 0.00 | INR Zero Only | |||||||||||||||||||||||||||||||||||||||||||
| 91.00 | S&F PVC (SWR) 75 mm bore pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and as directed by the Engineer-in-Charge. | 10.00 | RM | 99.00 | Excess(+) | 1 | Full Conversion | INR | 0.00 | 0.00 | INR Zero Only | |||||||||||||||||||||||||||||||||||||||||||
| 92.00 | S&F PVC (SWR) 110 mm bore pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and as directed by the Engineer-in-Charge. | 100.00 | RM | 99.00 | Excess(+) | 1 | Full Conversion | INR | 0.00 | 0.00 | INR Zero Only | |||||||||||||||||||||||||||||||||||||||||||
| 93.00 | S&F PVC (SWR) 75 mm bore pipes single socketed in any length with rubber ring joints fixed to walls complete all as specified and as directed by the Engineer-in-Charge. | 10.00 | RM | 99.00 | Excess(+) | 1 | Full Conversion | INR | 0.00 | 0.00 | INR Zero Only | |||||||||||||||||||||||||||||||||||||||||||
| 94.00 | S&F PVC (SWR) 110 mm bore pipes single socketed in any length with rubber ring joints fixed to walls complete all as specified and as directed by the Engineer-in-Charge. | 500.00 | RM | 99.00 | Excess(+) | 1 | Full Conversion | INR | 0.00 | 0.00 | INR Zero Only | |||||||||||||||||||||||||||||||||||||||||||
| 95.00 | S&F PVC (SWR) 75mm bends any radius complete all as specified and as directed by the Engineer-in-Charge. | 10.00 | Each | 99.00 | Excess(+) | 1 | Full Conversion | INR | 0.00 | 0.00 | INR Zero Only | |||||||||||||||||||||||||||||||||||||||||||
| 96.00 | S&F PVC (SWR) 110mm bends any radius complete all as specified and as directed by the Engineer-in-Charge. | 48.00 | Each | 99.00 | Excess(+) | 1 | Full Conversion | INR | 0.00 | 0.00 | INR Zero Only | |||||||||||||||||||||||||||||||||||||||||||
| 97.00 | S&F PVC (SWR) multi floor trap 75 mm with grating including jointing with solvent cement complete all as specified and as directed by the Engineer-in-Charge. | 50.00 | Each | 99.00 | Excess(+) | 1 | Full Conversion | INR | 0.00 | 0.00 | INR Zero Only | |||||||||||||||||||||||||||||||||||||||||||
| 98.00 | S&F PVC (SWR) branch piece 75mm, single (single Y) equal or unequal with access door complete all as specified and as directed by the Engineer-in-Charge. | 5.00 | Each | 99.00 | Excess(+) | 1 | Full Conversion | INR | 0.00 | 0.00 | INR Zero Only | |||||||||||||||||||||||||||||||||||||||||||
| 99.00 | S&F PVC (SWR) branch piece 110mm, single (single Y) equal or unequal with access door complete all as specified and as directed by the Engineer-in-Charge. | 50.00 | Each | 99.00 | Excess(+) | 1 | Full Conversion | INR | 0.00 | 0.00 | INR Zero Only | |||||||||||||||||||||||||||||||||||||||||||
| 100.00 | S&F in repair stack clamps out of 50 mm by 5 mm flat iron and 16mm dia round iron stays for fixing 75mm dia PVC pipe, including bolts and nuts and securing ends of stays to wall or roof complete all as specified and as directed by the Engineer-in-Charge. | 5.00 | Each | 99.00 | Excess(+) | 1 | Full Conversion | INR | 0.00 | 0.00 | INR Zero Only | |||||||||||||||||||||||||||||||||||||||||||
| 101.00 | S & F in repair stack clamps out of 50 mm by 5 mm flat iron and 16mm dia round iron stays for fixing 110mm dia PVC pipe, including bolts and nuts and securing ends of stays to wall or roof complete all as specified and as directed by the Engineer-in-Charge. | 198.00 | Each | 99.00 | Excess(+) | 1 | Full Conversion | INR | 0.00 | 0.00 | INR Zero Only | |||||||||||||||||||||||||||||||||||||||||||
| 102.00 | S&F PVC (SWR) vent cowl 75 mm dia complete all as specified and as directed by the Engineer-in-Charge. | 5.00 | Each | 99.00 | Excess(+) | 1 | Full Conversion | INR | 0.00 | 0.00 | INR Zero Only | |||||||||||||||||||||||||||||||||||||||||||
| 103.00 | S&F PVC (SWR) vent cowl 110 mm dia complete all as specified and as directed by the Engineer-in-Charge. | 10.00 | Each | 99.00 | Excess(+) | 1 | Full Conversion | INR | 0.00 | 0.00 | INR Zero Only | |||||||||||||||||||||||||||||||||||||||||||
| 104.00 | S&F in repairs 75mm bore PVC (SWR) junction single, (Single T) equal or unequal with oval access door complete all as specified and as directed by the Engineer-in-Charge. | 2.00 | Each | 99.00 | Excess(+) | 1 | Full Conversion | INR | 0.00 | 0.00 | INR Zero Only | |||||||||||||||||||||||||||||||||||||||||||
| 105.00 | S&F in repairs 110mm bore PVC (SWR) junction single, (Single T) equal or unequal with oval access door complete all as specified and as directed by the Engineer-in-Charge. | 7.00 | Each | 99.00 | Excess(+) | 1 | Full Conversion | INR | 0.00 | 0.00 | INR Zero Only | |||||||||||||||||||||||||||||||||||||||||||
| 106.00 | M&L for preparation of new steel and iron surfaces of any description over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and as directed by the Engineer-in-Charge. | 10.00 | Sqm | 99.00 | Excess(+) | 1 | Full Conversion | INR | 0.00 | 0.00 | INR Zero Only | |||||||||||||||||||||||||||||||||||||||||||
| 107.00 | M&L for prepartion of new or previously untreated wood and wood based surfaces of any description not otherwise described over 10cm width girth and applying two coats of synthetic enamel paint over a coat of pink primer, complete all as specified and as directed by the Engineer-in-Charge. | 110.00 | Sqm | 99.00 | Excess(+) | 1 | Full Conversion | INR | 0.00 | 0.00 | INR Zero Only | |||||||||||||||||||||||||||||||||||||||||||
| 108.00 | Dismantling of plain or corrugated steel sheets in roof coverings any type complete all as specified and as directed by the Engineer-in-Charge. | 95.00 | SQM | 99.00 | Excess(+) | 1 | Full Conversion | INR | 0.00 | 0.00 | INR Zero Only | |||||||||||||||||||||||||||||||||||||||||||
| 109.00 | S&F Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws/ 'L' or 'J' type hook complete all as specified and as directed by the Engineer-in-Charge. | 95.00 | SQM | 99.00 | Excess(+) | 1 | Full Conversion | INR | 0.00 | 0.00 | INR Zero Only | |||||||||||||||||||||||||||||||||||||||||||
| 110.00 | Dismantling wall and ceiling boarding of any description, thickness including cover fillets complete all as specified and as directed by the Engineer-in-Charge. | 60.00 | SQM | 99.00 | Excess(+) | 1 | Full Conversion | INR | 0.00 | 0.00 | INR Zero Only | |||||||||||||||||||||||||||||||||||||||||||
| 111.00 | Providing & Fixing false ceiling with Fibre Cement Designer tile Ivory painted (High Pressure Steam Cured) of 4-6mm thickness (as per IS:14862) of size 595x595 mm and any one of the design (oceanic, lake & hill, cascade or electra) in true horizontal level, suspended on inter locking metal grid of hot dipped galvanized steel sections (galvanized @ 120 gms, both side inclusive) consisting of main "T" runner with suitably spaced joints to get required length and 15x32 mm made from 0.30 mm thick sheet, spaced at 1200 mm c/c and cross "T" of size 15x32 mm made of 0.30 mm sheet, 1200mm long spaced between main "T" at 600 mm c/c to form a grid of 1200x600 mm and secondary cross "T" of length 600 mm and size15x32 mm made of 0.30 mm thick sheet to be interlocked at middle of the 1200x600 mm panel to form grids of 600x600 mm and wall angle of size 15x20 mm made of 0.30 mm thick sheet and laying false ceiling tiles in the grid including , required cutting/making, opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc. Main "T" runners to be suspended from ceiling using GI soffit cleats fixed to existing RCC lintel with dash fasteners, GI adjustable rods of 3mm dia with galvanised Butterfly level clips, spaced at 1200 mm c/c along main T, bottom exposed width of 15mm of all T -sections shall be centra black pre-painted with polyester paint, and having a load bearing capacity of 12 kg/sqm, all complete at all heights as complete all as specified and as directed by the Engineer-in-Charge. | 60.00 | SQM | 99.00 | Excess(+) | 1 | Full Conversion | INR | 0.00 | 0.00 | INR Zero Only | |||||||||||||||||||||||||||||||||||||||||||
| 112.00 | S&F in repair HDPE PVC lid (tank cover) with locking arrangement for 500/1000 Ltrs capacity PVC tank complete all as specified and as directed by the Engineer-in-Charge. | 60.00 | Each | 99.00 | Excess(+) | 1 | Full Conversion | INR | 0.00 | 0.00 | INR Zero Only | |||||||||||||||||||||||||||||||||||||||||||
| 113.00 | M&L for cleaning and removing, Exc 250 Ltrs but not exc 500 Ltrs capacity PVC water tank all scale and dirt, etc, from tanks and from mouths of circulating pipes, etc complete all as specified and as directed by the Engineer-in-Charge. | 65.00 | Each | 99.00 | Excess(+) | 1 | Full Conversion | INR | 0.00 | 0.00 | INR Zero Only | |||||||||||||||||||||||||||||||||||||||||||
| 114.00 | M&L Cleaning and removing, Exc 500 Ltrs but not exc 1000 Ltrs capacity PVC water tank all scale and dirt, etc, from tanks and from mouths of circulating pipes, etc complete all as specified and as directed by the Engineer-in-Charge. | 96.00 | Each | 99.00 | Excess(+) | 1 | Full Conversion | INR | 0.00 | 0.00 | INR Zero Only | |||||||||||||||||||||||||||||||||||||||||||
| 115.00 | M&L for washing/rubbing down and stopping of distempered, plastered and painted surface of wall including cornices etc and making good of holes by filling holes in plastered surfaces with POP mixed with distemper with and applying one coats of oil bound distemper complete all as specified and as directed by the Engineer-in-Charge. | 12530.00 | Sqm | 99.00 | Excess(+) | 1 | Full Conversion | INR | 0.00 | 0.00 | INR Zero Only | |||||||||||||||||||||||||||||||||||||||||||
| 116.00 | M&L for preparation of old distempered and painted surfaces including washing, rubbing down and stopping by brooming down , scraping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots and applying two coats of Distemper oil emulsion on wall surfaces to achieve smooth surface without visiable of brush/hair mark complete all as specified and as directed by the Engineer-in-Charge. | 7890.00 | Sqm | 99.00 | Excess(+) | 1 | Full Conversion | INR | 0.00 | 0.00 | INR Zero Only | |||||||||||||||||||||||||||||||||||||||||||
| 117.00 | M&L for preparation of old surfaces of wall and applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces. complete all as specified and as directed by the Engineer-in-Charge. | 10100.00 | Sqm | 99.00 | Excess(+) | 1 | Full Conversion | INR | 0.00 | 0.00 | INR Zero Only | |||||||||||||||||||||||||||||||||||||||||||
| 118.00 | M&L for preparation of old decorated surfaces (plastered or unplastered) and applying three coat of white wash on the surfaces of ceiling complete all as specified and as directed by the Engineer-in-Charge. | 14540.00 | Sqm | 99.00 | Excess(+) | 1 | Full Conversion | INR | 0.00 | 0.00 | INR Zero Only | |||||||||||||||||||||||||||||||||||||||||||
| 119.00 | M&L for complete removal existing treatment and applying 1mm thick of Birla white wall care putty to achieve smooth surfaces and applying two coats of Oil Bound Distemper of approved shade/tint over a coat of compatiable priming paint complete all as specified and as directed by the Engineer-in-Charge. | 4840.00 | Sqm | 99.00 | Excess(+) | 1 | Full Conversion | INR | 0.00 | 0.00 | INR Zero Only | |||||||||||||||||||||||||||||||||||||||||||
| Total in Figures | 0.00 | 0.00 | INR Zero Only | 4 | Construction of chamber for 100mm sluice plates | item5 | 10 | Nos | ||||||||||||||||||||||||||||||||||||||||||||||
| Quoted Rate in Figures | Select | 0.0000 | 0.0000 | Zero Only | ||||||||||||||||||||||||||||||||||||||||||||||||||
| Quoted Rate in Words | INR Zero Only |
Andaman & Nicobar Tenders |Andhra Pradesh Tenders |Arunachal Pradesh Tenders |Assam Tenders |Bihar Tenders |Chandigarh Tenders |Chhattisgarh Tenders |Dadra & Nagar Haveli Tenders |Daman & Diu Tenders |Delhi Tenders |Goa Tenders |Gujarat Tenders |Haryana Tenders |Himachal Pradesh Tenders |Jammu & Kashmir Tenders |Jharkhand Tenders |Karnataka Tenders |Kerala Tenders |Ladakh Tenders |Lakshadweep Tenders |Madhya Pradesh Tenders |Maharashtra Tenders |Manipur Tenders |Meghalaya Tenders |Mizoram Tenders |Nagaland Tenders |Odisha Tenders |Pondicherry Tenders |Punjab Tenders |Rajasthan Tenders |Sikkim Tenders |Tamil Nadu Tenders |Telangana Tenders |Tripura Tenders |Uttarakhand Tenders |Uttar Pradesh Tenders |West Bengal Tenders |