Items - ADDITION / ALTERATION AND IMPROVEMENT TO LT POWER SUPPLY DISTRIBUTION BY CONVERSION OF OVER HEAD LT LINES TO UNDER GROUND CABLE AT VARUNA RESIDENTIAL AREA OF NPOL, KOCHI
| Item Rate BoQ | ||||||||||||||||||||||||||||||||||||||||||||||||||||||
| BoQ_Ver4.0 | Item Rate | Normal | INR Only | INR | ||||||||||||||||||||||||||||||||||||||||||||||||||
| Select, Excess (+), Less (-) | Less (-) | |||||||||||||||||||||||||||||||||||||||||||||||||||||
| Tender Inviting Authority: Chief engineer R&D Secunderabad | ||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Name of Work: ADDITION / ALTERATION AND IMPROVEMENT TO LT POWER SUPPLY DISTRIBUTION BY CONVERSION OF OVER HEAD LT LINES TO UNDER GROUND CABLE AT VARUNA RESIDENTIAL AREA OF NPOL, KOCHI | ||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Contract No: CERD/KCH/TOKEN/25 OF 2025-2026 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Name of the Bidder/ Bidding Firm / Company : | ||||||||||||||||||||||||||||||||||||||||||||||||||||||
| PRICE SCHEDULE (This BOQ template must not be modified/replaced by the bidder and the same should be uploaded after filling the relevent columns, else the bidder is liable to be rejected for this tender. Bidders are allowed to enter the Bidder Name and Values only) | ||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Sl. No. | Item Description | Item Code / Make | Quantity | Units | Estimated Rate | Addition / Deduction | Addition / Deduction Values | Currency Convertion against each Item | Quoted Currency in INR / Other Currency | RATE In Figures To be entered by the Bidder Rs. P | Excise Duty | VAT | Freight Charges ( Unloading & Stacking) | Any Other Taxes/Duties/Levies | Other Taxes 2 | IIIrd Party i.e DGS&D / RITES etc Inspection Charges @0.34%+Service Tax | Less for Cenvat Credit,if any respect of Supplies Under full Excise Duty Category | TOTAL AMOUNT Without Taxes | TOTAL AMOUNT | TOTAL AMOUNT In Words | ||||||||||||||||||||||||||||||||||
| 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 10 | 11 | 12 | 13 | 14 | 15 | 16 | 17 | 18 | 19 | 20 | 21 | 22 | 23 | 24 | 25 | 26 | 27 | 28 | 29 | 30 | 31 | 32 | 33 | 34 | 35 | 36 | 37 | 38 | 39 | 40 | 41 | 42 | 43 | 44 | 45 | 46 | 47 | 48 | 49 | 50 | 51 | 52 | 53 | 54 | 55 |
| 1 | M & L XLPE insulated, armoured, heavy duty electrical cable with aluminium conductor, 1100 Volts grade, laid in trenches / fixed on wall of the following size complete all as specified and directed. Note: Excavation,returning filling and removal shall be measured and paid seperately under relavent items of BOQ | itemH1 | 1 | Construction of chamber for 100mm sluices valve | item1 | 10 | 1 Nos | |||||||||||||||||||||||||||||||||||||||||||||||
| 1.01 | 240 Sq mm 3.5 core | itemH1Code1 | 252.00 | Rm | 100.00 | Excess(+) | 1 | Full Conversion | INR | 0.00 | 0.00 | INR Zero Only | 1.01 | Supplying, Conveying and fixing spls. Including eart | item1 | 123.223 | Nos | |||||||||||||||||||||||||||||||||||||
| 1.02 | 185 Sq mm 3.5 core | code1.02 | 96.00 | Rm | 100.00 | Excess(+) | 1 | Full Conversion | INR | 0.00 | 0.00 | INR Zero Only | 1.01 | Supplying, Conveying and fixing spls. Including eart | item1 | 123.223 | Nos | |||||||||||||||||||||||||||||||||||||
| 1.03 | 150 Sq mm 3.5 core | itemH1Code2 | 386.00 | Rm | 100.00 | Excess(+) | 1 | Full Conversion | INR | 0.00 | 0.00 | INR Zero Only | 1.02 | Construction of chamber for 100mm sluice plates | item2 | 213 | Nos | |||||||||||||||||||||||||||||||||||||
| 1.04 | 120 Sq mm 3.5 core | itemH1Code3 | 222.00 | Rm | 100.00 | Excess(+) | 1 | Full Conversion | INR | 0.00 | 0.00 | INR Zero Only | 2 | Construction of chamber for 100mm sluices valve | item3 | 10 | Nos | |||||||||||||||||||||||||||||||||||||
| 1.05 | 95 Sq mm 3.5 core | itemH1Code4 | 352.00 | Rm | 100.00 | Excess(+) | 1 | Full Conversion | INR | 0.00 | 0.00 | INR Zero Only | 3 | Supplying, Conveying and fixing spls. Including ea | item4 | 10 | Nos | |||||||||||||||||||||||||||||||||||||
| 1.06 | 70 Sq mm 3.5 core | 223.00 | Rm | 100.00 | Excess(+) | 1 | Full Conversion | INR | 0.00 | 0.00 | INR Zero Only | |||||||||||||||||||||||||||||||||||||||||||
| 1.07 | 50 Sq mm 3.5 core | 248.00 | Rm | 100.00 | Excess(+) | 1 | Full Conversion | INR | 0.00 | 0.00 | INR Zero Only | |||||||||||||||||||||||||||||||||||||||||||
| 1.08 | 35 Sq mm 3.5 core | 65.00 | Rm | 100.00 | Excess(+) | 1 | Full Conversion | INR | 0.00 | 0.00 | INR Zero Only | |||||||||||||||||||||||||||||||||||||||||||
| 1.09 | 25 Sq mm 3.5 core | itemH1Code5 | 142.00 | Rm | 100.00 | Excess(+) | 1 | Full Conversion | INR | 0.00 | 0.00 | INR Zero Only | 1.01 | Supplying, Conveying and fixing spls. Including eart | item1 | 123.223 | Nos | |||||||||||||||||||||||||||||||||||||
| 1.10 | 16 Sq mm 4 core | itemH2 | 1051.00 | Rm | 100.00 | Excess(+) | 1 | Full Conversion | INR | 0.00 | 0.00 | INR Zero Only | 3 | Supplying, Conveying and fixing spls. Including ea | item4 | 10 | Nos | |||||||||||||||||||||||||||||||||||||
| 1.11 | 16 Sq mm 2 core | 180.00 | Rm | 100.00 | Excess(+) | 1 | Full Conversion | INR | 0.00 | 0.00 | INR Zero Only | |||||||||||||||||||||||||||||||||||||||||||
| 1.12 | 10 Sq mm 4 core | 2508.00 | Rm | 100.00 | Excess(+) | 1 | Full Conversion | INR | 0.00 | 0.00 | INR Zero Only | |||||||||||||||||||||||||||||||||||||||||||
| 2.00 | S&F including design, fabricating,errecting, connecting and testing totally enclosed LT cubicle panel board, 3 Phase, 4 wire system, indoor type, double door front and back opening type, separate compartment for each control gear, cable alley, provision of knock out type plates for various sizes of cables in and out, incoming and outgoing feeders duly marked on riveted plates etc., complete CPRI type tested factory made fabricated out of 2 mm thick as per IS-8623 and IP 55 Protection ,CRCA sheet duly treated through 8 tank pre treatment process and painted with epoxy powder coated matt finish of SIEMENS GREY structural RAL 7032 shade colour, built in industrial type locking arrangements on front and back and pre wired with PVC insulated multi stranded copper conductor for controls and monitors, PVC sleeved aluminium strip for connecting MCCBs ,panel mounted on angle iron frame of sutable size duly painted and embeded in PCC (1:3:6) 30 Cm below floor level and 45 Cm above floor level and consisting of following items :- Location (inside Substn No VI O/G LT panel T/F NO-II and Substn VII) | 2.00 | Each | 100.00 | Excess(+) | 1 | Full Conversion | INR | 0.00 | 0.00 | INR Zero Only | |||||||||||||||||||||||||||||||||||||||||||
| 2.01 | BUSBAR CHAMBER : Electrically grade 1200 Amp aluminium Busbar of capacity equal to 1.5 times of rated incoming control switch gear including interconnection of all switch gears duly insulated with colour coded heat shrinkable sleeve and mounted on suitable size of 'F' class insulators made of non hygroscopic,non combustible,track resistant high strength FRP insulators for phases and neural set of 4 for RYB &N -01 set Incomming: (a) MCCB 630 Amp, 4 pole 36 KA - 1 no (As incoming) (b) Digital Voltmeter 0-500 Volt - 01 no. (c) LED type indicating lamps - 03 nos. Outgoings: (a) MCCB 250 Amp, 4 pole, 25 KA - 04 nos. (b) MCCB 63 Amp, 16 KA, 4 pole - 01 nos. (c) Digital Ammeter 0-800 Amp - 01 no. (d) CT's 800/5 Amp - set of three. | |||||||||||||||||||||||||||||||||||||||||||||||||||||
| 3 | S&F including design, fabricating, errecting, connecting and testing totally enclosed LT cubicle panel board, 3 Phase, 4 wire system, indoor type, double door front and back opening type, separate compartment for each control gear, cable alley, provision of knock out type plates for various sizes of cables in and out, incoming and out going feeders duly marked on riveted plates etc., complete CPRI type tested factory made fabricated out of 2 mm thick as per IS-8623 and IP 55 Protection ,CRCA sheet duly treated through 8 tank pre treatment process and painted with epoxy powder coated matt finish of SIEMENS GREY structural RAL 7032 shade colour, built in industrial type locking arrangements on front and back and pre wired with PVC insulated multi stranded copper conductor for controls and monitors, PVC sleeved aluminium strip for connecting MCCBs ,panel mounted on angle iron frame of sutable size duly painted and embeded in PCC (1:3:6) 30 Cm below floor level and 45 Cm above floor level and consisting of following items :-. (T/F O/G LT panel inside S/S VI T/F NO-I ) | 1.00 | Each | 100.00 | Excess(+) | 1 | Full Conversion | INR | 0.00 | 0.00 | INR Zero Only | |||||||||||||||||||||||||||||||||||||||||||
| 3.01 | BUSBAR CHAMBER : Electrically grade 1200 Amp aluminium Busbar of capacity equal to 1.5 times of rated incoming control switch gear including interconnection of all switch gears duly insulated with colour coded heat shrinkable sleeve and mounted on suitable size of 'F' class insulators made of non hygroscopic,non combustible,track resistant high strength FRP insulators for phases and neural set of 4 for RYB &N -01 set Incomming: (a) MCCB 630 Amp, 4 pole 36 KA - 1 no (As incoming) (b) Digital Voltmeter 0-500 Volt - 01 no. (c) LED type indicating lamps - 03 nos. Outgoings: (a) MCCB 400 Amp, 4 pole, 25 KA - 01 no. (To Hanger panel) (b) MCCB 250 Amp, 4 pole, 25 KA - 03 nos. (c) MCCB 63 Amp, 16 KA, 4 pole - 02 nos. (d) Digital Ammeter 0-800 Amp - 01 no. (e) CT's 800/5 Amp - set of three. | |||||||||||||||||||||||||||||||||||||||||||||||||||||
| 4 | S&F including design, fabricating,errecting, connecting and testing totally enclosed LT cubicle panel board, 3 Phase, 4 wire system, outdoor type, double door front and back opening type, sloped canopy (hood) on top extended 100 mm all arround, separate compartment for each control gear, cable alley, provision of knock out type plates for various sizes of cables in and out, incoming and out going feeders duly marked on riveted plates etc., complete CPRI type tested factory made fabricated out of 3mm thick as per IS-8623 and IP 55 Protection ,CRCA sheet duly treated through 8 tank pre treatment process and painted with epoxy powder coated matt finish of SIEMENS GREY structural RAL 7032 shade colour, built in industrial type locking arrangements on front and back and pre wired with PVC insulated multi stranded copper conductor for controls and monitors, PVC sleeved aluminium strip for connecting MCCBs ,panel mounted on angle iron frame of sutable size duly painted and embeded in PCC (1:3:6) 45 Cm below ground level and 45 Cm above ground level and consisting of following items :-( LT FPB Nos -I) | 1.00 | Each | 100.00 | Excess(+) | 1 | Full Conversion | INR | 0.00 | 0.00 | INR Zero Only | |||||||||||||||||||||||||||||||||||||||||||
| 4.01 | BUSBAR CHAMBER : Electrically grade 600 Amp aluminium Busbar of capacity equal to 1.5 times of rated incoming control switch gear including interconnection of all switch gears duly insulated with colour coded heat shrinkable sleeve and mounted on suitable size of 'F' class insulators made of non hygroscopic,non combustible,track resistant high strength FRP insulators for phases and neural set of 4 for RYB &N -01 set Incomming: (a) MCCB 315 Amp, 4 pole, 25 KA - 1 no (As incoming) (b) Digital Voltmeter 0-500 Volt - 01 no. (c) LED type indicating lamps - 03 nos. Outgoings: (a) MCCB 125 Amp, 4 pole, 25 KA - 03 nos. (To LT FPB No I/A1, LT DB No I/A2, Spare) (b) MCCB 63 Amp, 16 KA, 4 pole -01 nos. Type (III/1-8) (c) Digital Ammeter 0-500 Amp - 01 no. (d) CT's 500/5 Amp - set of three. | |||||||||||||||||||||||||||||||||||||||||||||||||||||
| 5 | S&F including design, fabricating,errecting, connecting and testing totally enclosed LT cubicle panel board, 3 Phase, 4 wire system,outdoor type, double door front and back opening type, sloped canopy (hood) on top extended 100 mm all arround, separate compartment for each control gear, cable alley, provision of knock out type plates for various sizes of cables in and out, incoming and out going feeders duly marked on riveted plates etc., complete CPRI type tested factory made fabricated out of 3mm thick as per IS-8623 and IP 55 Protection ,CRCA sheet duly treated through 8 tank pre treatment process and painted with epoxy powder coated matt finish of SIEMENS GREY structural RAL 7032 shade colour, built in industrial type locking arrangements on front and back and pre wired with PVC insulated multi stranded copper conductor for controls and monitors, PVC sleeved aluminium strip for connecting MCCBs ,panel mounted on angle iron frame of sutable size duly painted and embeded in PCC (1:3:6) 45 Cm below ground level and 45 Cm above ground level and consisting of following items :-(LT FPB No I/A1,LT FPB No I/A2) | 2.00 | Each | 100.00 | Excess(+) | 1 | Full Conversion | INR | 0.00 | 0.00 | INR Zero Only | |||||||||||||||||||||||||||||||||||||||||||
| 5.01 | BUSBAR CHAMBER : Electrically grade 250 Amp aluminium Busbar of capacity equal to 1.5 times of rated incoming control switch gear including interconnection of all switch gears duly insulated with colour coded heat shrinkable sleeve and mounted on suitable size of 'F' class insulators made of non hygroscopic,non combustible,track resistant high strength FRP insulators for phases and neural set of 4 for RYB &N -01 set Incomming: (a) MCCB 125 Amp, 4 pole, 25 KA - 1 no (b) Digital Voltmeter 0-500 Volt - 01 no. (c) LED type indicating lamps - 03 nos. Outgoings: (a) MCCB 63 Amp, 4 pole, 16 KA - 04 nos. (For each 8 Qtrs and one Spare) (b) Digital Ammeter 0-500 Amp - 01 no. (c) CT's 200/5 Amp - set of three. | |||||||||||||||||||||||||||||||||||||||||||||||||||||
| 6 | S&F including design, fabricating,errecting, connecting and testing totally enclosed LT cubicle panel board, 3 Phase, 4 wire system, outdoor type, double door front and back opening type, sloped canopy (hood) on top extended 100 mm all arround, separate compartment for each control gear, cable alley, provision of knock out type plates for various sizes of cables in and out, incoming and out going feeders duly marked on riveted plates etc., complete CPRI type tested factory made fabricated out of 3mm thick as per IS-8623 and IP 55 Protection,CRCA sheet duly treated through 8 tank pre treatment process and painted with epoxy powder coated matt finish of SIEMENS GREY structural RAL 7032 shade colour, built in industrial type locking arrangements on front and back and pre wired with PVC insulated multi stranded copper conductor for controls and monitors, PVC sleeved aluminium strip for connecting MCCBs ,panel mounted on angle iron frame of sutable size duly painted and embeded in PCC (1:3:6) 45 Cm below ground level and 45 Cm above ground level and consisting of following items :- ( LT FPB Nos -II) | 1.00 | Each | 100.00 | Excess(+) | 1 | Full Conversion | INR | 0.00 | 0.00 | INR Zero Only | |||||||||||||||||||||||||||||||||||||||||||
| 6.01 | BUSBAR CHAMBER : Electrically grade 600 Amp aluminium Busbar of capacity equal to 1.5 times of rated incoming control switch gear including interconnection of all switch gears duly insulated with colour coded heat shrinkable sleeve and mounted on suitable size of 'F' class insulators made of non hygroscopic,non combustible,track resistant high strength FRP insulators for phases and neural set of 4 for RYB &N -01 set Incomming: (a) MCCB 315 Amp, 4 pole, 25 KA- 1 no (b) Digital Voltmeter 0-500 Volt - 01 no. (c) LED type indicating lamps - 03 nos. Outgoings: (a) MCCB 200 Amp, 4 pole, 25 KA - 01 nos. (To change over to LT DB No VI) (b) MCCB 125 Amp, 4 pole, 25 KA -01 nos. (O/g to LT DB No II/A1) (c) Digital Ammeter 0-500 Amp - 01 no. (d) CT's 500/5 Amp - set of three. | |||||||||||||||||||||||||||||||||||||||||||||||||||||
| 7 | S&F including design, fabricating,errecting, connecting and testing totally enclosed LT cubicle panel board, 3 Phase, 4 wire system, outdoor type, double door front and back opening type, sloped canopy (hood) on top extended 100 mm all arround, separate compartment for each control gear, cable alley, provision of knock out type plates for various sizes of cables in and out, incoming and out going feeders duly marked on riveted plates etc., complete CPRI type tested factory made fabricated out of 3mm thickas per IS-8623 and IP 55 Protection, CRCA sheet duly treated through 8 tank pre treatment process and painted with epoxy powder coated matt finish of SIEMENS GREY structural RAL 7032 shade colour, built in industrial type locking arrangements on front and back and pre wired with PVC insulated multi stranded copper conductor for controls and monitors, PVC sleeved aluminium strip for connecting MCCBs ,panel mounted on angle iron frame of sutable size duly painted and embeded in PCC (1:3:6) 45 Cm below ground level and 45 Cm above ground level and consisting of following items :- ( LT FPB Nos -II/A1,LT FPB No V ) | 2.00 | Each | 100.00 | Excess(+) | 1 | Full Conversion | INR | 0.00 | 0.00 | INR Zero Only | |||||||||||||||||||||||||||||||||||||||||||
| 7.01 | BUSBAR CHAMBER : Electrically grade 250 Amp aluminium Busbar of capacity equal to 1.5 times of rated incoming control switch gear including interconnection of all switch gears duly insulated with colour coded heat shrinkable sleeve and mounted on suitable size of 'F' class insulators made of non hygroscopic,non combustible,track resistant high strength FRP insulators for phases and neural set of 4 for RYB &N -01 set Incomming: (a) MCCB 125 Amp, 4 pole, 25 KA - 1 no (b) Digital Voltmeter 0-500 Volt - 01 no. (c) LED type indicating lamps - 03 nos. Outgoings: (a) MCCB 63 Amp, 4 pole, 16 KA - 04 nos. (For each block * Qtrs and one Spare) (b) Digital Ammeter 0-200 Amp - 01 no. (c) CT's 200/5 Amp - set of three. | |||||||||||||||||||||||||||||||||||||||||||||||||||||
| 8 | S&F including design, fabricating,errecting, connecting and testing totally enclosed LT cubicle panel board, 3 Phase, 4 wire system,outdoor type, double door front and back opening type, sloped canopy (hood) on top extended 100 mm all arround, separate compartment for each control gear, cable alley, provision of knock out type plates for various sizes of cables in and out, incoming and out going feeders duly marked on riveted plates etc., complete CPRI type tested factory made fabricated out of 3mm thick as per IS-8623 and IP 55 Protection,CRCA sheet duly treated through 8 tank pre treatment process and painted with epoxy powder coated matt finish of SIEMENS GREY structural RAL 7032 shade colour, built in industrial type locking arrangements on front and back and pre wired with PVC insulated multi stranded copper conductor for controls and monitors, PVC sleeved aluminium strip for connecting MCCBs ,panel mounted on angle iron frame of sutable size duly painted and embeded in PCC (1:3:6) 45 Cm below ground level and 45 Cm above ground level and consisting of following items :- ( LT FPB No VI )N | 1.00 | Each | 100.00 | Excess(+) | 1 | Full Conversion | INR | 0.00 | 0.00 | INR Zero Only | |||||||||||||||||||||||||||||||||||||||||||
| 8.01 | BUSBAR CHAMBER : Electrically grade 500 Amp aluminium Busbar of capacity equal to 1.5 times of rated incoming control switch gear including interconnection of all switch gears duly insulated with colour coded heat shrinkable sleeve and mounted on suitable size of 'F' class insulators made of non hygroscopic,non combustible,track resistant high strength FRP insulators for phases and neural set of 4 for RYB &N -01 set Incomming: (a) MCCB 315 Amp, 4 pole, 25 KA- 1 no (b) Digital Voltmeter 0-500 Volt - 01 no. (c) LED type indicating lamps - 03 nos. Outgoings: (a) MCCB 125 Amp, 4 pole, 25 KA - 02 nos. (To LT FPB VI/N1, LT FPB VI/N2) (b) MCB 32 Amp, 4 pole, 10 KA-02 nos. (P-267, spare) (c) Digital Ammeter 0-200 Amp - 01 no. (d) CT's 300/5 Amp - set of three. | 1.01 | Supplying, Conveying and fixing spls. Including eart | item1 | 123.223 | Nos | ||||||||||||||||||||||||||||||||||||||||||||||||
| 9 | S&F including design, fabricating,errecting, connecting and testing totally enclosed LT cubicle panel board, 3 Phase, 4 wire system,outdoor type ,double door front and back opening type, sloped canopy (hood) on top extended 100 mm all arround, separate compartment for each control gear, cable alley, provision of knock out type plates for various sizes of cables in and out, incoming and out going feeders duly marked on riveted plates etc., complete CPRI type tested factory made fabricated out of 3mm thick as per IS-8623 and IP 55 Protection,CRCA sheet duly treated through 8 tank pre treatment process and painted with epoxy powder coated matt finish of SIEMENS GREY structural RAL 7032 shade colour, built in industrial type locking arrangements on front and back and pre wired with PVC insulated multi stranded copper conductor for controls and monitors, PVC sleeved aluminium strip for connecting MCCBs ,panel mounted on angle iron frame of sutable size duly painted and embeded in PCC (1:3:6) 45 Cm below ground level and 45 Cm above ground level and consisting of following items :- ( LT FPB Nos -VI/N1 ) | 1 | 1.00 | Each | 100.00 | Excess(+) | 1 | Full Conversion | INR | 0.00 | 0.00 | INR Zero Only | ||||||||||||||||||||||||||||||||||||||||||
| 9.01 | BUSBAR CHAMBER : Electrically grade 200 Amp aluminium Busbar of capacity equal to 1.5 times of rated incoming control switch gear including interconnection of all switch gears duly insulated with colour coded heat shrinkable sleeve and mounted on suitable size of 'F' class insulators made of non hygroscopic,non combustible,track resistant high strength FRP insulators for phases and neural set of 4 for RYB &N -01 set Incomming: (a) MCCB 125 Amp, 4 pole, 25 KA - 1 no (b) Digital Voltmeter 0-500 Volt - 01 no. (c) LED type indicating lamps - 03 nos. Outgoings: (a) MCB 32 Amp, 4 pole, 10 KA - 07 nos. (b) Digital Ammeter 0-100 Amp - 01 no. (c) CT's 150/5 Amp - set of three. | 2 | Construction of chamber for 100mm sluices valve | item3 | 10 | Nos | ||||||||||||||||||||||||||||||||||||||||||||||||
| 10 | S&F including design, fabricating,errecting, connecting and testing totally enclosed LT cubicle panel board, 3 Phase, 4 wire system, outdoor type, double door front and back opening type, sloped canopy (hood) on top extended 100 mm all arround, separate compartment for each control gear, cable alley, provision of knock out type plates for various sizes of cables in and out, incoming and out going feeders duly marked on riveted plates etc., complete CPRI type tested factory made fabricated out of 3mm thick as per IS-8623 and IP 55 Protection,CRCA sheet duly treated through 8 tank pre treatment process and painted with epoxy powder coated matt finish of SIEMENS GREY structural RAL 7032 shade colour, built in industrial type locking arrangements on front and back and pre wired with PVC insulated multi stranded copper conductor for controls and monitors, PVC sleeved aluminium strip for connecting MCCBs ,panel mounted on angle iron frame of sutable size duly painted and embeded in PCC (1:3:6) 45 Cm below ground level and 45 Cm above ground level and consisting of following items :- ( LT FPB Nos -VI/N2 ) | 1.00 | Each | 100.00 | Excess(+) | 1 | Full Conversion | INR | 0.00 | 0.00 | INR Zero Only | |||||||||||||||||||||||||||||||||||||||||||
| 10.01 | BUSBAR CHAMBER : Electrically grade 200 Amp aluminium Busbar of capacity equal to 1.5 times of rated incoming control switch gear including interconnection of all switch gears duly insulated with colour coded heat shrinkable sleeve and mounted on suitable size of 'F' class insulators made of non hygroscopic,non combustible,track resistant high strength FRP insulators for phases and neural set of 4 for RYB &N -01 set Incomming: (a) MCCB 125 Amp, 4 pole, 25 KA - 1 no (b) Digital Voltmeter 0-500 Volt - 01 no. (c) LED type indicating lamps - 03 nos. Outgoings: (a) MCB 32 Amp, 4 pole, 10 KA - 05 nos. (b) Digital Ammeter 0-100 Amp - 01 no. (c) CT's 150/5 Amp - set of three. | |||||||||||||||||||||||||||||||||||||||||||||||||||||
| 11 | S&F including design, fabricating, errecting, connecting and testing totally enclosed LT cubicle panel board, 3 Phase, 4 wire system, outdoor type, double door front and back opening type, sloped canopy (hood) on top extended 100 mm all arround, separate compartment for each control gear, cable alley, provision of knock out type plates for various sizes of cables in and out, incoming and out going feeders duly marked on riveted plates etc., complete CPRI type tested factory made fabricated out of 3mm thick as per IS-8623 and IP 55 Protection,CRCA sheet duly treated through 8 tank pre treatment process and painted with epoxy powder coated matt finish of SIEMENS GREY structural RAL 7032 shade colour, built in industrial type locking arrangements on front and back and pre wired with PVC insulated multi stranded copper conductor for controls and monitors, PVC sleeved aluminium strip for connecting MCCBs ,panel mounted on angle iron frame of sutable size duly painted and embeded in PCC (1:3:6) 45 Cm below ground level and 45 Cm above ground level and consisting of following items :- ( LT FPB Nos -VII ) | 1.00 | Each | 100.00 | Excess(+) | 1 | Full Conversion | INR | 0.00 | 0.00 | INR Zero Only | |||||||||||||||||||||||||||||||||||||||||||
| 11.01 | BUSBAR CHAMBER : Electrically grade 200 Amp aluminium Busbar of capacity equal to 1.5 times of rated incoming control switch gear including interconnection of all switch gears duly insulated with colour coded heat shrinkable sleeve and mounted on suitable size of 'F' class insulators made of non hygroscopic,non combustible,track resistant high strength FRP insulators for phases and neural set of 4 for RYB &N -01 set Incomming: (a) MCCB 125 Amp, 4 pole, 25 KA- 1 no (b) Digital Voltmeter 0-500 Volt - 01 no. (c) LED type indicating lamps - 03 nos. Outgoings: (a) MCCB 100 Amp, 4 pole, 25 KA - 02 nos. (LT FPB VII/A1) (b) MCB 63 Amp, 4 pole, 10 KA-01 no. (To DREMI) (c) Digital Ammeter 0-200 Amp - 01 no. (d) CT's 200/5 Amp - set of three. | |||||||||||||||||||||||||||||||||||||||||||||||||||||
| 12 | S&F including design, fabricating,errecting, connecting and testing totally enclosed LT cubicle panel board, 3 Phase, 4 wire system, outdoor type, double door front and back opening type, sloped canopy (hood) on top extended 100 mm all arround, separate compartment for each control gear, cable alley, provision of knock out type plates for various sizes of cables in and out, incoming and out going feeders duly marked on riveted plates etc., complete CPRI type tested factory made fabricated out of 3mm thick as per IS-8623 and IP 55 Protection,CRCA sheet duly treated through 8 tank pre treatment process and painted with epoxy powder coated matt finish of SIEMENS GREY structural RAL 7032 shade colour, built in industrial type locking arrangements on front and back and pre wired with PVC insulated multi stranded copper conductor for controls and monitors, PVC sleeved aluminium strip for connecting MCCBs ,panel mounted on angle iron frame of sutable size duly painted and embeded in PCC (1:3:6) 45 Cm below ground level and 45 Cm above ground level and consisting of following items :- ( LT FPB Nos -VII/A1 ) | 1.00 | Each | 100.00 | Excess(+) | 1 | Full Conversion | INR | 0.00 | 0.00 | INR Zero Only | |||||||||||||||||||||||||||||||||||||||||||
| 12.01 | BUSBAR CHAMBER : Electrically grade 200 Amp aluminium Busbar of capacity equal to 1.5 times of rated incoming control switch gear including interconnection of all switch gears duly insulated with colour coded heat shrinkable sleeve and mounted on suitable size of 'F' class insulators made of non hygroscopic,non combustible,track resistant high strength FRP insulators for phases and neural set of 4 for RYB &N -01 set Incomming: (a) MCCB 100 Amp, 4 pole, 25 KA- 1 no (b) Digital Voltmeter 0-500 Volt - 01 no. (c) LED type indicating lamps - 03 nos. Outgoings: (a) MCCB 100 Amp, 4 pole, 25 KA - 02 nos. (To LT DB VII/A2) (b) MCB 32 Amp, 2 pole, 10 KA-03 nos. (P-16, JCO Qtrs, Spare) (c) Digital Ammeter 0-100 Amp - 01 no. (d) CT's 100/5 Amp - set of three. | |||||||||||||||||||||||||||||||||||||||||||||||||||||
| 13 | S&F including design, fabricating,errecting, connecting and testing totally enclosed LT cubicle panel board, 3 Phase, 4 wire system, outdoor type, double door front and back opening type, sloped canopy (hood) on top extended 100 mm all arround, separate compartment for each control gear, cable alley, provision of knock out type plates for various sizes of cables in and out, incoming and out going feeders duly marked on riveted plates etc., complete CPRI type tested factory made fabricated out of 3mm thick as per IS-8623 and IP 55 Protection,,CRCA sheet duly treated through 8 tank pre treatment process and painted with epoxy powder coated matt finish of SIEMENS GREY structural RAL 7032 shade colour, built in industrial type locking arrangements on front and back and pre wired with PVC insulated multi stranded copper conductor for controls and monitors, PVC sleeved aluminium strip for connecting MCCBs ,panel mounted on angle iron frame of sutable size duly painted and embeded in PCC (1:3:6) 45 Cm below ground level and 45 Cm above ground level and consisting of following items :- ( LT FPB Nos -VII/A2 ) | 1.00 | Each | 100.00 | Excess(+) | 1 | Full Conversion | INR | 0.00 | 0.00 | INR Zero Only | |||||||||||||||||||||||||||||||||||||||||||
| 13.01 | BUSBAR CHAMBER : Electrically grade 200 Amp aluminium Busbar of capacity equal to 1.5 times of rated incoming control switch gear including interconnection of all switch gears duly insulated with colour coded heat shrinkable sleeve and mounted on suitable size of 'F' class insulators made of non hygroscopic,non combustible,track resistant high strength FRP insulators for phases and neural set of 4 for RYB &N -01 set Incomming: (a) MCCB 100 Amp, 4 pole, 25 KA- 1 no (b) Digital Voltmeter 0-500 Volt - 01 no. (c) LED type indicating lamps - 03 nos. Outgoings: (a) MCB 32 Amp, 4 pole, 10 KA - 01 nos. (To P-85) (b) MCB 32 Amp, 2 pole, 10 KA-03 nos. (P-86, NCO Qtrs, Spare) (c) Digital Ammeter 0-100 Amp - 01 no. (d) CT's 100/5 Amp - set of three. | |||||||||||||||||||||||||||||||||||||||||||||||||||||
| 14 | S&F including design, fabricating,errecting, connecting and testing totally enclosed LT cubicle panel board, 3 Phase, 4 wire system, outdoor type, double door front and back opening type, sloped canopy (hood) on top extended 100 mm all arround, separate compartment for each control gear, cable alley, provision of knock out type plates for various sizes of cables in and out, incoming and out going feeders duly marked on riveted plates etc., complete CPRI type tested factory made fabricated out of 3mm thick as per IS-8623 and IP 55 Protection,CRCA sheet duly treated through 8 tank pre treatment process and painted with epoxy powder coated matt finish of SIEMENS GREY structural RAL 7032 shade colour, built in industrial type locking arrangements on front and back and pre wired with PVC insulated multi stranded copper conductor for controls and monitors, PVC sleeved aluminium strip for connecting MCCBs ,panel mounted on angle iron frame of sutable size duly painted and embeded in PCC (1:3:6) 45 Cm below ground level and 45 Cm above ground level and consisting of following items :- ( LT FPB Nos -VIII ) | 1.00 | Each | 100.00 | Excess(+) | 1 | Full Conversion | INR | 0.00 | 0.00 | INR Zero Only | |||||||||||||||||||||||||||||||||||||||||||
| 14.01 | BUSBAR CHAMBER : Electrically grade 200 Amp aluminium Busbar of capacity equal to 1.5 times of rated incoming control switch gear including interconnection of all switch gears duly insulated with colour coded heat shrinkable sleeve and mounted on suitable size of 'F' class insulators made of non hygroscopic,non combustible,track resistant high strength FRP insulators for phases and neural set of 4 for RYB &N -01 set Incomming: (a) MCCB 63 Amp, 4 pole, 16 KA- 1 no (b) Digital Voltmeter 0-500 Volt - 01 no. (c) LED type indicating lamps - 03 nos. Outgoings: (a) MCCB 32 Amp, 4 pole, 10 KA - 01 nos. (To LT FPB VIII/A2) (b) MCB 63 Amp, 4 pole, 10 KA-01 no. (NGO Qtrs) (c) MCB 32 Amp, 4 pole, 10 KA-01 no. (Spare) (d) Digital Ammeter 0-100 Amp - 01 no. (e) CT's 100/5 Amp - set of three. | |||||||||||||||||||||||||||||||||||||||||||||||||||||
| 15 | S&F including design, fabricating,errecting, connecting and testing totally enclosed LT cubicle panel board, 3 Phase, 4 wire system, outdoor type, double door front and back opening type, sloped canopy (hood) on top extended 100 mm all arround, separate compartment for each control gear, cable alley, provision of knock out type plates for various sizes of cables in and out, incoming and out going feeders duly marked on riveted plates etc., complete CPRI type tested factory made fabricated out of 3mm thick as per IS-8623 and IP 55 Protection,CRCA sheet duly treated through 8 tank pre treatment process and painted with epoxy powder coated matt finish of SIEMENS GREY structural RAL 7032 shade colour, built in industrial type locking arrangements on front and back and pre wired with PVC insulated multi stranded copper conductor for controls and monitors, PVC sleeved aluminium strip for connecting MCCBs ,panel mounted on angle iron frame of sutable size duly painted and embeded in PCC (1:3:6) 45 Cm below ground level and 45 Cm above ground level and consisting of following items :- ( LT FPB Nos -VIII/A1 ) | 1.00 | Each | 100.00 | Excess(+) | 1 | Full Conversion | INR | 0.00 | 0.00 | INR Zero Only | |||||||||||||||||||||||||||||||||||||||||||
| 15.01 | BUSBAR CHAMBER : Electrically grade 200 Amp aluminium Busbar of capacity equal to 1.5 times of rated incoming control switch gear including interconnection of all switch gears duly insulated with colour coded heat shrinkable sleeve and mounted on suitable size of 'F' class insulators made of non hygroscopic,non combustible,track resistant high strength FRP insulators for phases and neural set of 4 for RYB &N -01 set Incomming: (a) MCCB 32 Amp, 4 pole, 10 KA- 1 no (b) Digital Voltmeter 0-500 Volt - 01 no. (c) LED type indicating lamps - 03 nos. Outgoings: (a) MCB 32 Amp, 4 pole, 10 KA - 01 nos. (DSC Single Accn) (b) MCB 32 Amp, 4 pole, 10 KA-01 nos. (Spare) (c) Digital Ammeter 0-100 Amp - 01 no. (d) CT's 100/5 Amp - set of three. | |||||||||||||||||||||||||||||||||||||||||||||||||||||
| 16 | M & L for LT cable route indicator with LT cable indication with necessary PCC complete all as specified and directed. | 50.00 | Each | 100.00 | Excess(+) | 1 | Full Conversion | INR | 0.00 | 0.00 | INR Zero Only | |||||||||||||||||||||||||||||||||||||||||||
| 17 | S&F junction box made form SMC / FRP sheet ready made of size 295 x 195 x 100 mm with aluminium bus bar of 100 Amps capacity for RYB and neutral made in suitable size fixed inside the junction box with necessary supporting insulators fixed on hylem sheet fixed to pole / wall with MS clamp 20x3 mm and nuts & bolts, MCB SP 6 Amp 10 KA 240 V - 01 No. and Aluminium lugs for connecting cables complete all as specified and directed. | 66.00 | Each | 100.00 | Excess(+) | 1 | Full Conversion | INR | 0.00 | 0.00 | INR Zero Only | |||||||||||||||||||||||||||||||||||||||||||
| 18 | Supply and fixing copper conductor of size 3x1.5 Sq mm PVC insulated single core cable passing through PVC conduit from junction box to fitting for street lights complete all as specified and directed. Note: PVC conduit is measured and paid seperately. | 600.00 | Rm | 100.00 | Excess(+) | 1 | Full Conversion | INR | 0.00 | 0.00 | INR Zero Only | |||||||||||||||||||||||||||||||||||||||||||
| 19 | Supply and fixing PVC non metallic conduit 25 mm dia to pole with necessary bend elbow, coupler, check nuts, FI clamp 20x3 mm nuts nuts & bolts, PVC flexible conduit, etc., in replacement including painting to clamps complete all as specified and directed. | 400.00 | Rm | 100.00 | Excess(+) | 1 | Full Conversion | INR | 0.00 | 0.00 | INR Zero Only | |||||||||||||||||||||||||||||||||||||||||||
| 20 | Supply and lay in trenches / fixed on wall GI tubing light grade with necessary fittings such as bend, tee, elbow etc for the following sizes for protection of LT UG cable complete all as specified and directed. | |||||||||||||||||||||||||||||||||||||||||||||||||||||
| 20.01 | 150 mm bore | 30.00 | Rm | 100.00 | Excess(+) | 1 | Full Conversion | INR | 0.00 | 0.00 | INR Zero Only | |||||||||||||||||||||||||||||||||||||||||||
| 20.02 | 100 mm bore | 50.00 | Rm | 100.00 | Excess(+) | 1 | Full Conversion | INR | 0.00 | 0.00 | INR Zero Only | |||||||||||||||||||||||||||||||||||||||||||
| 20.03 | 80 mm bore | 58.00 | Rm | 100.00 | Excess(+) | 1 | Full Conversion | INR | 0.00 | 0.00 | INR Zero Only | |||||||||||||||||||||||||||||||||||||||||||
| 20.04 | 50 mm bore | 333.00 | Rm | 100.00 | Excess(+) | 1 | Full Conversion | INR | 0.00 | 0.00 | INR Zero Only | |||||||||||||||||||||||||||||||||||||||||||
| 21 | Excavation in trenches not exceeding 1.5 metre deep and 1.5 metre width as in Hard dense soil complete all as specified and directed. Note: No JCB excavation is permitted for earth work. | 1070.00 | Cubic Metre | 100.00 | Excess(+) | 1 | Full Conversion | INR | 0.00 | 0.00 | INR Zero Only | |||||||||||||||||||||||||||||||||||||||||||
| 22 | Returning filling including levelling watering and well ramming layer not exceeding 25 cm thick complete all as specified and directed. | 548.00 | Cubic Metre | 100.00 | Excess(+) | 1 | Full Conversion | INR | 0.00 | 0.00 | INR Zero Only | |||||||||||||||||||||||||||||||||||||||||||
| 23 | Removal of surface soil to a distance of not exceeding 50 metres and deposited where directed at a level not exceeding 1.5 metre above the starting point complete all as specified and directed. | 522.00 | Cubic Metre | 100.00 | Excess(+) | 1 | Full Conversion | INR | 0.00 | 0.00 | INR Zero Only | |||||||||||||||||||||||||||||||||||||||||||
| 24 | S & L for riddled earth / sand for cushioning for cable protection in trenches 8 cm before laying cable and 15cm deep over the cable complete all as specified and directed. Note: Punned thickness shall be taken for measurement. | 384.00 | Cubic Metre | 100.00 | Excess(+) | 1 | Full Conversion | INR | 0.00 | 0.00 | INR Zero Only | |||||||||||||||||||||||||||||||||||||||||||
| 25 | M & L for laying LV unreinforced precast concrete cable cover but class B Designation 75, Type 2, flat, size 230 mm x 110 mm x 70 mm complete all as specified and directed. | 43.19 | Per 1000 Nos | 100.00 | Excess(+) | 1 | Full Conversion | INR | 0.00 | 0.00 | INR Zero Only | |||||||||||||||||||||||||||||||||||||||||||
| 26 | M & L for road cutting / removing the hard standing / cutting floor inside the substation / E/M installations / Path for laying of cables of any size complete all as specified and directed. | 9.00 | Cubic Metre | 100.00 | Excess(+) | 1 | Full Conversion | INR | 0.00 | 0.00 | INR Zero Only | |||||||||||||||||||||||||||||||||||||||||||
| 27 | Supply and fix steel tubular swaged poles type 410SP-31(9.0 metre long) Swan Neck Type complete with CI base plate and finial single swan neck, complete all as specified and directed. Note: PCC for foundation and coping shall be measured and paid under relavent items of BOQ seperately | 7.00 | Each | 100.00 | Excess(+) | 1 | Full Conversion | INR | 0.00 | 0.00 | INR Zero Only | |||||||||||||||||||||||||||||||||||||||||||
| 28 | Dismantling the exisitng LED street light fitting of wattage 45/60/90 watt from existing PCC/ steel poles of height max upto 9.0 metre and deposit to store for safe custody complete all as specified and directed. | 7.00 | Each | 100.00 | Excess(+) | 1 | Full Conversion | INR | 0.00 | 0.00 | INR Zero Only | |||||||||||||||||||||||||||||||||||||||||||
| 29 | Fixing only LED type street light fitting of wattage 45/60/90 watt suitable for mounting on 40/50 mm dia GI bracket arms / single swan neck steel poles complete all as specified and directed. | 7.00 | Each | 100.00 | Excess(+) | 1 | Full Conversion | INR | 0.00 | 0.00 | INR Zero Only | |||||||||||||||||||||||||||||||||||||||||||
| 30 | Dismantling of over head lines comprising of copper / aluminium over head conductor, GI wire, cross arms, insulators etc., complete all as specified and directed. | 1350.00 | Kilogram | 100.00 | Excess(+) | 1 | Full Conversion | INR | 0.00 | 0.00 | INR Zero Only | |||||||||||||||||||||||||||||||||||||||||||
| 31 | Dismantling of pole / street light standard / strut embedded in cement concrete foundation etc., complete all as specified and directed. | 7.00 | Each | 100.00 | Excess(+) | 1 | Full Conversion | INR | 0.00 | 0.00 | INR Zero Only | |||||||||||||||||||||||||||||||||||||||||||
| 32 | Taking down old unserviceable indoor LT Feeder pillar box complete all as specified and directed. | 3.00 | Each | 100.00 | Excess(+) | 1 | Full Conversion | INR | 0.00 | 0.00 | INR Zero Only | |||||||||||||||||||||||||||||||||||||||||||
| 33 | Taking down existing service connection cable from pole to DB inside the building complete for credit complete all as specified and directed. | 1231.00 | Rm | 100.00 | Excess(+) | 1 | Full Conversion | INR | 0.00 | 0.00 | INR Zero Only | |||||||||||||||||||||||||||||||||||||||||||
| 34 | M & L for PCC 1:4:8 (1 cement : 4 manufactured sand derived from recycled concrete aggregate (RCA) : 8 graded stone aggregate 40 mm nominal size recycled aggregate (RA) complete as in foundations mass concrete, fillings complete all as specified and directed. | 7.00 | Cubic Metre | 100.00 | Excess(+) | 1 | Full Conversion | INR | 0.00 | 0.00 | INR Zero Only | |||||||||||||||||||||||||||||||||||||||||||
| 35 | M & L for PCC 1:3:6 (1 cement : 3 manufactured sand derived from recycled concrete aggregate (RCA) : 6 graded stone aggregate 40 mm nominal size recycled aggregate (RA) complete as in foundations mass concrete, fillings complete all as specified and directed. | 7.00 | Cubic Metre | 100.00 | Excess(+) | 1 | Full Conversion | INR | 0.00 | 0.00 | INR Zero Only | |||||||||||||||||||||||||||||||||||||||||||
| 36 | M&L for earthing complete with galvanised steel, earth plate electrode 600x600mm x 6mm thick burried directly in ground verticaly (earth pit not less than 2.25 mtrs below ground level ) with top edge of the plate not less than 1.5 mtrs below normal ground level connected to galvanised iron 32x6 mm strip as earth lead by means of bolts, nuts, check nuts and washers of galvanised iron/steel connected to main switch board/main DBs/earthing test point including all necessary excavation and earth work in hard/dense soil common salt and charcoal dust mixed and packed in layers each 150mm thick all round the GI earth plate, watering pipe 20mm dia GI medium grade. GI sheet 0.63 mm thick funnel, wire gauge, pit/chamber in PCC 1:3:6 type C1 and 50mm thick RCC cover in PCC 1:2:4 type B1 duly reinforced with MS round bars 6mm dia @ 150c/c both ways with suitable lifting handle to cover, GI protection pipe 40mm dia light grade up to 7.5mtr from electrode GI pipe to be fixed with complete all as per DSR / relavent IS code & as specified and directed. | 20.00 | Each Job | 100.00 | Excess(+) | 1 | Full Conversion | INR | 0.00 | 0.00 | INR Zero Only | |||||||||||||||||||||||||||||||||||||||||||
| 37 | Providing and fixing 25 mm x 5 mm GI strip on surface or in recess for connections etc., complete all as specified and directed. | 100.00 | Rm | 100.00 | Excess(+) | 1 | Full Conversion | INR | 0.00 | 0.00 | INR Zero Only | |||||||||||||||||||||||||||||||||||||||||||
| Total in Figures | 0.00 | 0.00 | INR Zero Only | 4 | Construction of chamber for 100mm sluice plates | item5 | 10 | Nos | ||||||||||||||||||||||||||||||||||||||||||||||
| Quoted Rate in Figures | Select | 0.0000 | 0.0000 | Zero Only | ||||||||||||||||||||||||||||||||||||||||||||||||||
| Quoted Rate in Words | INR Zero Only |
Andaman & Nicobar Tenders |Andhra Pradesh Tenders |Arunachal Pradesh Tenders |Assam Tenders |Bihar Tenders |Chandigarh Tenders |Chhattisgarh Tenders |Dadra & Nagar Haveli Tenders |Daman & Diu Tenders |Delhi Tenders |Goa Tenders |Gujarat Tenders |Haryana Tenders |Himachal Pradesh Tenders |Jammu & Kashmir Tenders |Jharkhand Tenders |Karnataka Tenders |Kerala Tenders |Ladakh Tenders |Lakshadweep Tenders |Madhya Pradesh Tenders |Maharashtra Tenders |Manipur Tenders |Meghalaya Tenders |Mizoram Tenders |Nagaland Tenders |Odisha Tenders |Pondicherry Tenders |Punjab Tenders |Rajasthan Tenders |Sikkim Tenders |Tamil Nadu Tenders |Telangana Tenders |Tripura Tenders |Uttarakhand Tenders |Uttar Pradesh Tenders |West Bengal Tenders |