Items - REPAIRS TO B/R WORKS AT OTM BLDGS OF KMC AND JUHU UNDER GE (NORTH) SANTACRUZ, MUMBAI
| Item Rate BoQ | ||||||||||||||||||||||||||||||||||||||||||||||||||||||
| BoQ_Ver3.1 | Item Rate | Normal | INR Only | INR | ||||||||||||||||||||||||||||||||||||||||||||||||||
| Select, Excess (+), Less (-) | Less (-) | |||||||||||||||||||||||||||||||||||||||||||||||||||||
| Tender Inviting Authority: Garrison Engineer (North) Mumbai | ||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Name of Work: :REPAIRS TO B/R WORKS AT OTM BLDGS OF KMC AND JUHU UNDER GE (NORTH) SANTACRUZ, MUMBAI | ||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Contract No: GE(N) M- OF 2025-2026 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Name of the Bidder/ Bidding Firm / Company : | ||||||||||||||||||||||||||||||||||||||||||||||||||||||
| PRICE SCHEDULE ( BOQ DATED :26 AUG 2025) (This BOQ template must not be modified/replaced by the bidder and the same should be uploaded after filling the relevant columns, else the bidder is liable to be rejected for this tender. Bidders are allowed to enter the Bidder Name and Values only ) | ||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Sl. No. | Item Description | Item Code / Make | Quantity | Units | Estimated Rate in Rs. P | Addition / Deduction | Addition / Deduction Values | Currency Convertion against each Item | Quoted Currency in INR / Other Currency | BASIC RATE In Figures To be entered by the Bidder Rs. P | Excise Duty | VAT | Freight Charges ( Unloading & Stacking) | Any Other Taxes/Duties/Levies | Other Taxes 2 | IIIrd Party i.e DGS&D / RITES etc Inspection Charges @0.34%+Service Tax | Less for Cenvat Credit,if any respect of Supplies Under full Excise Duty Category | TOTAL AMOUNT in Rs. P | TOTAL AMOUNT | TOTAL AMOUNT In Words | ||||||||||||||||||||||||||||||||||
| 1 | 2 | 3 | 3 | 4 | 6 | 7 | 8 | 9 | 10 | 11 | 12 | 5 | 14 | 15 | 16 | 17 | 18 | 19 | 20 | 21 | 22 | 23 | 24 | 25 | 26 | 27 | 28 | 29 | 30 | 31 | 32 | 33 | 34 | 35 | 36 | 37 | 38 | 39 | 40 | 41 | 42 | 43 | 44 | 45 | 46 | 47 | 48 | 49 | 50 | 51 | 52 | 8 | 6 | 7 |
| 1 | Dismantling wrought iron or mild steel work of any description not otherwise provided for & removing clear off site complete all as specified and as directed by Engineer-in-Charge. | 15.00 | QUINTAL | 100.00 | Excess(+) | 1 | Full Conversion | INR | 0.00 | 0.00 | INR Zero Only | 1 | Dismantling wrought iron or mild steel work of any description not otherwise provided for & removing clear off site complete all as specified and as directed by Engineer-in-Charge. | 15 | QUINTAL | |||||||||||||||||||||||||||||||||||||||
| 2 | Material and labour for rolled mild steel sections as in roof trusses (framed), trussed, purlins, crane gantries, rails, and fastenings and heavy bracket framing, (beam, tee, angle, channels or flat sections) including notching, drilling, fitting, riveting and / or welding or connecting with bolts and nuts (including rivets or bolts and nuts) conforming to Fe 410 W Gde E- 250, Quality B complete all as specified and as directed by Engineer-in-Charge. | 1500.00 | KILOGRAM | 100.00 | Excess(+) | 1 | Full Conversion | INR | 0.00 | 0.00 | INR Zero Only | 2 | Material and labour for rolled mild steel sections as in roof trusses (framed), trussed, purlins, crane gantries, rails, and fastenings and heavy bracket framing, (beam, tee, angle, channels or flat sections) including notching, drilling, fitting, riveting and / or welding or connecting with bolts and nuts (including rivets or bolts and nuts) conforming to Fe 410 W Gde E- 250, Quality B complete all as specified and as directed by Engineer-in-Charge. | 1500 | KILOGRAM | |||||||||||||||||||||||||||||||||||||||
| 3 | Material and labour for preparing new steel surfaces of any description, over 10cm width or girth, not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide primer with all necessary staging, scaffolding etc as required complete all as specified and as directed by Engineer-in-Charge. Make : Asian Paints/ Nerolac Paints/ Dulux ( Akzonobel)/ Nippon Paint India Pvt Ltd | 100.00 | SQUARE METRE | 10.00 | Excess(+) | 1 | Full Conversion | INR | 0.00 | 0.00 | INR Zero Only | 3 | Material and labour for preparing new steel surfaces of any description, over 10cm width or girth, not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide primer with all necessary staging, scaffolding etc as required complete all as specified and as directed by Engineer-in-Charge. Make : Asian Paints/ Nerolac Paints/ Dulux ( Akzonobel)/ Nippon Paint India Pvt Ltd | 100 | SQUARE METRE | |||||||||||||||||||||||||||||||||||||||
| 4 | Material and labour for providing Plain cement concrete 1:2:4, type B1 , Nominal mix using 20mm graded stone aggregates as in bed block of angle iron post and coping at security wall and the like including weathering, slightly rounded or chamfered angles and throating, as directed including necessary form work for fair finished surfaces complete all as specified and as directed by Engineer-in-Charge. | 1.00 | CUBIC METRE | 10.00 | Excess(+) | 1 | Full Conversion | INR | 0.00 | 0.00 | INR Zero Only | 4 | Material and labour for providing Plain cement concrete 1:2:4, type B1 , Nominal mix using 20mm graded stone aggregates as in bed block of angle iron post and coping at security wall and the like including weathering, slightly rounded or chamfered angles and throating, as directed including necessary form work for fair finished surfaces complete all as specified and as directed by Engineer-in-Charge. | 1 | CUBIC METRE | |||||||||||||||||||||||||||||||||||||||
| 5 | Demolition of brick work/stone masonry built in cement mortar or cement lime mortar including all quoins, arches, pillars, PCC coping etc, but excluding ashlar facings, dressed stonework and precast concrete articles and removing of debris outside MD land complete all as specified and as directed by Engineer-in-Charge. | 5.00 | CUBIC METRE | 10.00 | Excess(+) | 1 | Full Conversion | INR | 0.00 | 0.00 | INR Zero Only | 5 | Demolition of brick work/stone masonry built in cement mortar or cement lime mortar including all quoins, arches, pillars, PCC coping etc, but excluding ashlar facings, dressed stonework and precast concrete articles and removing of debris outside MD land complete all as specified and as directed by Engineer-in-Charge. | 5 | CUBIC METRE | |||||||||||||||||||||||||||||||||||||||
| 6 | Material and labour for brick work with sub class 'B' bricks, straight or curved on plan, exceeding 6 m mean radius, built in cement mortar 1:6 complete all as specified and as directed by Engineer-in-Charge. | 5.00 | CUBIC METRE | 10.00 | Excess(+) | 1 | Full Conversion | INR | 0.00 | 0.00 | INR Zero Only | 6 | Material and labour for brick work with sub class 'B' bricks, straight or curved on plan, exceeding 6 m mean radius, built in cement mortar 1:6 complete all as specified and as directed by Engineer-in-Charge. | 5 | CUBIC METRE | |||||||||||||||||||||||||||||||||||||||
| 7 | Taking down cement plaster on brick or stone walls, ceilings etc., without disturbing brick work, including raking out joints, hacking for key, scrubbing down with water and removing of debris outside MD land complete all as specified and as directed by Engineer-in-Charge | 175.00 | SQUARE METRE | 10.00 | Excess(+) | 1 | Full Conversion | INR | 0.00 | 0.00 | INR Zero Only | 7 | Taking down cement plaster on brick or stone walls, ceilings etc., without disturbing brick work, including raking out joints, hacking for key, scrubbing down with water and removing of debris outside MD land complete all as specified and as directed by Engineer-in-Charge | 175 | SQUARE METRE | |||||||||||||||||||||||||||||||||||||||
| 8 | Material and labour for 15 mm thick rendering in cement mortar (1:4) on fair faces of brick/concrete surfaces & finishing the surface even and smooth without using extra cement complete all as specified and as directed by Engineer-in-Charge. | 100.00 | SQUARE METRE | 10.00 | Excess(+) | 1 | Full Conversion | INR | 0.00 | 0.00 | INR Zero Only | 8 | Material and labour for 15 mm thick rendering in cement mortar (1:4) on fair faces of brick/concrete surfaces & finishing the surface even and smooth without using extra cement complete all as specified and as directed by Engineer-in-Charge. | 100 | SQUARE METRE | |||||||||||||||||||||||||||||||||||||||
| 9 | Material and labour for 10 mm thick rendering in cement mortar (1:6) on fair faces of brick/concrete surfaces & finishing the surface even and smooth without using extra cement complete all as specified and as directed by Engineer-in-Charge. | 50.00 | SQUARE METRE | 10.00 | Excess(+) | 1 | Full Conversion | INR | 0.00 | 0.00 | INR Zero Only | 9 | Material and labour for 10 mm thick rendering in cement mortar (1:6) on fair faces of brick/concrete surfaces & finishing the surface even and smooth without using extra cement complete all as specified and as directed by Engineer-in-Charge. | 50 | SQUARE METRE | |||||||||||||||||||||||||||||||||||||||
| 10 | Material and labour for rendering 5mm thick plaster in cement mortar (1:3) on internal surfaces of ceiling and finishing the surfaces even and smooth without using extra cement complete all as specified and as directed by Engineer-in-Charge. | 25.00 | SQUARE METRE | 10.00 | Excess(+) | 1 | Full Conversion | INR | 0.00 | 0.00 | INR Zero Only | 10 | Material and labour for rendering 5mm thick plaster in cement mortar (1:3) on internal surfaces of ceiling and finishing the surfaces even and smooth without using extra cement complete all as specified and as directed by Engineer-in-Charge. | 25 | SQUARE METRE | |||||||||||||||||||||||||||||||||||||||
| 11 | Material and labour for preparation of newly plastered surfaces of ceiling and applying three coats of white wash complete all as specified and as directed by Engineer-in-Charge. | 225.00 | SQUARE METRE | 10.00 | Excess(+) | 1 | Full Conversion | INR | 0.00 | 0.00 | INR Zero Only | 11 | Material and labour for preparation of newly plastered surfaces of ceiling and applying three coats of white wash complete all as specified and as directed by Engineer-in-Charge. | 225 | SQUARE METRE | |||||||||||||||||||||||||||||||||||||||
| 12 | Material and labour for preparation of newly plastered wall surfaces and applying two coats of oil bound distemper with roller over a coat of alkali resistant wall primer complete all as specified and directed by Engineer in Charge. Make: Asian Paints (Tractor) / Nerolac Paints /Jenson & NIcholson / Shalimar Paints | 50.00 | SQUARE METRE | 10.00 | Excess(+) | 1 | Full Conversion | INR | 0.00 | 0.00 | INR Zero Only | 12 | Material and labour for preparation of newly plastered wall surfaces and applying two coats of oil bound distemper with roller over a coat of alkali resistant wall primer complete all as specified and directed by Engineer in Charge. Make: Asian Paints (Tractor) / Nerolac Paints /Jenson & NIcholson / Shalimar Paints | 50 | SQUARE METRE | |||||||||||||||||||||||||||||||||||||||
| 13 | Material and labour for new plastered wall surface and applying two coats of Acrylic weather proof coat 100% exterior grade paint over one coat of acrylic primer complete all as specified and as directed by Engineer-in-Charge. Make : APEX ULTIMA” of Asian Paints/ “WEATHER COAT ALL GUARD” of Berger Paints/"EXCEL TOP GUARD” of Nerolac/ “DULUX WEATHERSHIELD MAX” of ICI India | 100.00 | SQUARE METRE | 10.00 | Excess(+) | 1 | Full Conversion | INR | 0.00 | 0.00 | INR Zero Only | 13 | Material and labour for new plastered wall surface and applying two coats of Acrylic weather proof coat 100% exterior grade paint over one coat of acrylic primer complete all as specified and as directed by Engineer-in-Charge. Make : APEX ULTIMA” of Asian Paints/ “WEATHER COAT ALL GUARD” of Berger Paints/"EXCEL TOP GUARD” of Nerolac/ “DULUX WEATHERSHIELD MAX” of ICI India | 100 | SQUARE METRE | |||||||||||||||||||||||||||||||||||||||
| 14 | Dismantling Asbestos cement (corrugated, semi corrugated, etc.) sheets in roof coverings including ridges & removing clear off site complete all as specified and as directed by Engineer-in-Charge. | 605.00 | SQUARE METRE | 10.00 | Excess(+) | 1 | Full Conversion | INR | 0.00 | 0.00 | INR Zero Only | 14 | Dismantling Asbestos cement (corrugated, semi corrugated, etc.) sheets in roof coverings including ridges & removing clear off site complete all as specified and as directed by Engineer-in-Charge. | 605 | SQUARE METRE | |||||||||||||||||||||||||||||||||||||||
| 15 | Supply and fix Pre- painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick as per approved profile of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws or L type or J type or cranked hook bolts or as per manufacture instruction complete all as specified and as directed by Engineer-in-Charge. Make: JINDAL / INDALCO / HINDALCO / ASSOCIATED Profiles and Aluminium Ltd / ESSAR colour coated sheets/TATA | 550.00 | SQUARE METRE | 10.00 | Excess(+) | 1 | Full Conversion | INR | 0.00 | 0.00 | INR Zero Only | 15 | Supply and fix Pre- painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick as per approved profile of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws or L type or J type or cranked hook bolts or as per manufacture instruction complete all as specified and as directed by Engineer-in-Charge. Make: JINDAL / INDALCO / HINDALCO / ASSOCIATED Profiles and Aluminium Ltd / ESSAR colour coated sheets/TATA | 550 | SQUARE METRE | |||||||||||||||||||||||||||||||||||||||
| 16 | Supply and fix Pre- painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm thick as per approved profile of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws or L type or J type or cranked hook bolts or as per manufacture instruction complete all as specified and as directed by Engineer-in-Charge. Make: JINDAL / INDALCO / HINDALCO / ASSOCIATED Profiles and Aluminium Ltd / ESSAR colour coated sheets/TATA | 55.00 | SQUARE METRE | 100.00 | Excess(+) | 1 | Full Conversion | INR | 0.00 | 0.00 | INR Zero Only | 16 | Supply and fix Pre- painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm thick as per approved profile of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws or L type or J type or cranked hook bolts or as per manufacture instruction complete all as specified and as directed by Engineer-in-Charge. Make: JINDAL / INDALCO / HINDALCO / ASSOCIATED Profiles and Aluminium Ltd / ESSAR colour coated sheets/TATA | 55 | SQUARE METRE | |||||||||||||||||||||||||||||||||||||||
| 17 | Supply & Fix 0.8mm thick Plain, galvanised, mild steel sheeting in ridges, hips, valley gutters, drip and straight flashings (length and girth as fixed) with grade of zinc coating 275 complete all as specified and as directed by Engr-in-Charge. | 35.00 | SQUARE METRE | 100.00 | Excess(+) | 1 | Full Conversion | INR | 0.00 | 0.00 | INR Zero Only | 17 | Supply & Fix 0.8mm thick Plain, galvanised, mild steel sheeting in ridges, hips, valley gutters, drip and straight flashings (length and girth as fixed) with grade of zinc coating 275 complete all as specified and as directed by Engr-in-Charge. | 35 | SQUARE METRE | |||||||||||||||||||||||||||||||||||||||
| 18 | Demolition of cement concrete (unreinforced) in ground floors and pavings not exceeding 15cm thickness (below or above ground level) including tiles and removal of debris outside MD land complete all as specified and as directed by Engineer-in-Charge. | 17.00 | CUBIC METRE | 10.00 | Excess(+) | 1 | Full Conversion | INR | 0.00 | 0.00 | INR Zero Only | 18 | Demolition of cement concrete (unreinforced) in ground floors and pavings not exceeding 15cm thickness (below or above ground level) including tiles and removal of debris outside MD land complete all as specified and as directed by Engineer-in-Charge. | 17 | CUBIC METRE | |||||||||||||||||||||||||||||||||||||||
| 19 | Material and labour for 100mm thick Plain Cement Concrete 1:2:4 type B1, using 20mm graded stone aggregate as in sub base of flooring/ hard standing/path and finished even and fair without using extra cement etc complete all as specified and as directed by Engineer-in-Charge | 170.00 | SQUARE METRE | 10.00 | Excess(+) | 1 | Full Conversion | INR | 0.00 | 0.00 | INR Zero Only | 19 | Material and labour for 100mm thick Plain Cement Concrete 1:2:4 type B1, using 20mm graded stone aggregate as in sub base of flooring/ hard standing/path and finished even and fair without using extra cement etc complete all as specified and as directed by Engineer-in-Charge | 170 | SQUARE METRE | |||||||||||||||||||||||||||||||||||||||
| 20 | Supply and fix glass dividing strips, 3mm thick and width of strip 28mm, inserted in position all as specified and as directed by Engineer-in-Charge. | 40.00 | RUNNING METRE | 10.00 | Excess(+) | 1 | Full Conversion | INR | 0.00 | 0.00 | INR Zero Only | 20 | Supply and fix glass dividing strips, 3mm thick and width of strip 28mm, inserted in position all as specified and as directed by Engineer-in-Charge. | 40 | RUNNING METRE | |||||||||||||||||||||||||||||||||||||||
| 21 | Demolition of reinforced cement concrete of any description (beam, chajja, fins, RCC water tank, roof sla etc) & in any position including necessary scaffolding arrangement (reinforcement cut as required to facilitate demolition) and removing concrete debris and depositing outside MD land all as specified and as directed by Engineer-in-Charge. | 3.00 | CUBIC METRE | 10.00 | Excess(+) | 1 | Full Conversion | INR | 0.00 | 0.00 | INR Zero Only | 21 | Demolition of reinforced cement concrete of any description (beam, chajja, fins, RCC water tank, roof sla etc) & in any position including necessary scaffolding arrangement (reinforcement cut as required to facilitate demolition) and removing concrete debris and depositing outside MD land all as specified and as directed by Engineer-in-Charge. | 3 | CUBIC METRE | |||||||||||||||||||||||||||||||||||||||
| 22 | Supply and fix TMT bars, 10mm dia and over cut to length bent to shape required including cranking, bending spirally for hooping for columns hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and directed by Engineer-in-Charge. Note: Cutting of rusted reinforcement & welding shall be inclusive in this item of work | 400.00 | KILOGRAM | 10.00 | Excess(+) | 1 | Full Conversion | INR | 0.00 | 0.00 | INR Zero Only | 22 | Supply and fix TMT bars, 10mm dia and over cut to length bent to shape required including cranking, bending spirally for hooping for columns hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and directed by Engineer-in-Charge. Note: Cutting of rusted reinforcement & welding shall be inclusive in this item of work | 400 | KILOGRAM | |||||||||||||||||||||||||||||||||||||||
| 23 | Supply and fix TMT bars, 8 to 10mm dia in stirrups, spacers and binder, cut to length bent to shape required including cranking, bending spirally for hooping for columns hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and directed by Engineer-in-Charge. Note: Cutting of rusted reinforcement & welding shall be inclusive in this item of work | 250.00 | KILOGRAM | 10.00 | Excess(+) | 1 | Full Conversion | INR | 0.00 | 0.00 | INR Zero Only | 23 | Supply and fix TMT bars, 8 to 10mm dia in stirrups, spacers and binder, cut to length bent to shape required including cranking, bending spirally for hooping for columns hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and directed by Engineer-in-Charge. Note: Cutting of rusted reinforcement & welding shall be inclusive in this item of work | 250 | KILOGRAM | |||||||||||||||||||||||||||||||||||||||
| 24 | Supply & fix MS/TS dowel pins/staple/shear pins including drilling holes in concrete and providing labour but excludeing the materials for grouting the pins etc complete all as specified and as directed by Engineer-in-Charge. | 400.00 | EACH | 10.00 | Excess(+) | 1 | Full Conversion | INR | 0.00 | 0.00 | INR Zero Only | 24 | Supply & fix MS/TS dowel pins/staple/shear pins including drilling holes in concrete and providing labour but excludeing the materials for grouting the pins etc complete all as specified and as directed by Engineer-in-Charge. | 400 | EACH | |||||||||||||||||||||||||||||||||||||||
| 25 | Material & labour for repairing of damaged concrete portion by using superfluid dual shrinkage compensated structural grade M-40 micro concrete of at all levels with all leads and lift as directed including mixing, laying, levelling, finishing and curing complete all as specified and directed by Engineer-in-Charge. Make: Fosroc / SIKA / BASF / Krishna Conchem or equivalent approved . | 3.00 | CUBIC METRE | 10.00 | Excess(+) | 1 | Full Conversion | INR | 0.00 | 0.00 | INR Zero Only | 25 | Material & labour for repairing of damaged concrete portion by using superfluid dual shrinkage compensated structural grade M-40 micro concrete of at all levels with all leads and lift as directed including mixing, laying, levelling, finishing and curing complete all as specified and directed by Engineer-in-Charge. Make: Fosroc / SIKA / BASF / Krishna Conchem or equivalent approved . | 3 | CUBIC METRE | |||||||||||||||||||||||||||||||||||||||
| 26 | Material and labour for formwork using steel shutters or 12mm marine ply to have the smooth finish to pour the micro concrete/ concrete including de-shuttering etc complete all as specified and as directed by Engineer-in-Charge. | 50.00 | SQUARE METRE | 10.00 | Excess(+) | 1 | Full Conversion | INR | 0.00 | 0.00 | INR Zero Only | 26 | Material and labour for formwork using steel shutters or 12mm marine ply to have the smooth finish to pour the micro concrete/ concrete including de-shuttering etc complete all as specified and as directed by Engineer-in-Charge. | 50 | SQUARE METRE | |||||||||||||||||||||||||||||||||||||||
| 27 | Material and labour for providing and applying rust cleaner of approved make over prepared reinforcement, including removing concrete all around reinforcement including from behind the reinforcing bars by manual methods such as hammering the rebar, using wire brushes, chiseling, etc. and applying rust removing solution of approved make with cotton waste swab to reinforcements etc complete as directed by Engineer-In-Charge. Make- Dr FIXIT/ FOSROC/ Krishna Conchem/BASF/Sika | 150.00 | SQUARE METRE | 10.00 | Excess(+) | 1 | Full Conversion | INR | 0.00 | 0.00 | INR Zero Only | 27 | Material and labour for providing and applying rust cleaner of approved make over prepared reinforcement, including removing concrete all around reinforcement including from behind the reinforcing bars by manual methods such as hammering the rebar, using wire brushes, chiseling, etc. and applying rust removing solution of approved make with cotton waste swab to reinforcements etc complete as directed by Engineer-In-Charge. Make- Dr FIXIT/ FOSROC/ Krishna Conchem/BASF/Sika | 150 | SQUARE METRE | |||||||||||||||||||||||||||||||||||||||
| 28 | Material and labour for providing and applying two coats of anticorrosive epoxy phenolic rebar protective system IPNet RB of Krishna Conchem or equivalent of approved make and quality comprises of resin and hardener mixed as per manufacturer's instructions with minimum 9-10 hours between the coats, sprinkling dry sand when 2nd coat is tacky so as to provide rough finish and ensuring air curing of minimum 10 hours after the top coat before any subsequent treatment etc. including scaffolding etc complete all as specified and as directed by Engineer-in-Charge. Make- Dr FIXIT/ FOSROC/ Krishna Conchem/BASF/Sika as approved by GE Note: (a) New Reinforcement shall be measured and paid separately under respective item. (b) Cost of welding deemed to be inclusive in this item of work. | 150.00 | SQUARE METRE | 10.00 | Excess(+) | 1 | Full Conversion | INR | 0.00 | 0.00 | INR Zero Only | 28 | Material and labour for providing and applying two coats of anticorrosive epoxy phenolic rebar protective system IPNet RB of Krishna Conchem or equivalent of approved make and quality comprises of resin and hardener mixed as per manufacturer's instructions with minimum 9-10 hours between the coats, sprinkling dry sand when 2nd coat is tacky so as to provide rough finish and ensuring air curing of minimum 10 hours after the top coat before any subsequent treatment etc. including scaffolding etc complete all as specified and as directed by Engineer-in-Charge. Make- Dr FIXIT/ FOSROC/ Krishna Conchem/BASF/Sika as approved by GE Note: (a) New Reinforcement shall be measured and paid separately under respective item. (b) Cost of welding deemed to be inclusive in this item of work. | 150 | SQUARE METRE | |||||||||||||||||||||||||||||||||||||||
| 29 | Material and labour for providing and applying a priming cum bonding coat of two component Epoxide Resin conforming to ASTM-C-882-91 of approved make and quality to clean and sound concrete area by brush or any other established method by mixing base and curing agent 2:1 proportion by weight for joining old and new concrete as per technical specifications of manufacturer complete all as specified and as directed by Engineer-in-Charge. Make- Dr FIXIT/ FOSROC/ Krishna Conchem/BASF/Sika as approved by GE Note-Work shall be carried out as per the manufacturers specifications & certificate on this account shall be taken from consultant and as approved by Engineer-in-charge | 150.00 | SQUARE METRE | 10.00 | Excess(+) | 1 | Full Conversion | INR | 0.00 | 0.00 | INR Zero Only | 29 | Material and labour for providing and applying a priming cum bonding coat of two component Epoxide Resin conforming to ASTM-C-882-91 of approved make and quality to clean and sound concrete area by brush or any other established method by mixing base and curing agent 2:1 proportion by weight for joining old and new concrete as per technical specifications of manufacturer complete all as specified and as directed by Engineer-in-Charge. Make- Dr FIXIT/ FOSROC/ Krishna Conchem/BASF/Sika as approved by GE Note-Work shall be carried out as per the manufacturers specifications & certificate on this account shall be taken from consultant and as approved by Engineer-in-charge | 150 | SQUARE METRE | |||||||||||||||||||||||||||||||||||||||
| 30 | Material and labour for surface preparation of existing concrete components including grinding/rubbing carefully by grinder without damaging the existing concrete including cleaning the surfaces by blower , removal of external plaster wherever exists, cost inclusive of transportation, labour conveying debris away from the Defence land, tools and tacklers, lead and lift and clean water thoroughly complete all as specified and directed by Engr-in-Charge. | 200.00 | SQUARE METRE | 10.00 | Excess(+) | 1 | Full Conversion | INR | 0.00 | 0.00 | INR Zero Only | 30 | Material and labour for surface preparation of existing concrete components including grinding/rubbing carefully by grinder without damaging the existing concrete including cleaning the surfaces by blower , removal of external plaster wherever exists, cost inclusive of transportation, labour conveying debris away from the Defence land, tools and tacklers, lead and lift and clean water thoroughly complete all as specified and directed by Engr-in-Charge. | 200 | SQUARE METRE | |||||||||||||||||||||||||||||||||||||||
| 31 | Material and labour for providing and laying 20 mm thick POLYMER MODIFIED MORTAR over identified R.C.C. members in One layer in proportion as per approved make, blended to a required consistency and applying and finishing by floating, curing after initial setting time, including providing and inserting 10 mm mild steel shear key bars (minimum 3 nos per sqm), wherever required, bonding slurry, etc complete all as specified and as directed by Engineer-in-Charge. Make- Dr FIXIT/ FOSROC/ Krishna Conchem/BASF/Sika as approved by GE. Note for Item No.21 to 31:- (i) The work under Item No. 1 to 12 shall be carried out by authorised applicator only. (ii) Defect liability for these items shall be 5 years from certified date of completion. (iii) Amount of 5% of these items shall be retained during RAR and FB. This amount shall be released after successful completion of Defects liability period as mentioned above. (iv) Non destructive testing shall be got carried out through IIT / NIT / College of Engineering Pune to decide fulfillment of fitness criteria of structure. (v) The test shall be carried out at each discrete location or locations decided by GE or testing authority. (vi)The cost of testing shall be deemed to be included in the rate quoted by the contractor. Completion shall be issued by GE after only getting structural stability certificate of each respective building from testing authority. | 200.00 | SQUARE METRE | 100.00 | Excess(+) | 1 | Full Conversion | INR | 0.00 | 0.00 | INR Zero Only | 31 | Material and labour for providing and laying 20 mm thick POLYMER MODIFIED MORTAR over identified R.C.C. members in One layer in proportion as per approved make, blended to a required consistency and applying and finishing by floating, curing after initial setting time, including providing and inserting 10 mm mild steel shear key bars (minimum 3 nos per sqm), wherever required, bonding slurry, etc complete all as specified and as directed by Engineer-in-Charge. Make- Dr FIXIT/ FOSROC/ Krishna Conchem/BASF/Sika as approved by GE. Note for Item No.21 to 31:- (i) The work under Item No. 1 to 12 shall be carried out by authorised applicator only. (ii) Defect liability for these items shall be 5 years from certified date of completion. (iii) Amount of 5% of these items shall be retained during RAR and FB. This amount shall be released after successful completion of Defects liability period as mentioned above. (iv) Non destructive testing shall be got carried out through IIT / NIT / College of Engineering Pune to decide fulfillment of fitness criteria of structure. (v) The test shall be carried out at each discrete location or locations decided by GE or testing authority. (vi)The cost of testing shall be deemed to be included in the rate quoted by the contractor. Completion shall be issued by GE after only getting structural stability certificate of each respective building from testing authority. | 200 | SQUARE METRE | |||||||||||||||||||||||||||||||||||||||
| 32 | Material and labour for dismantling of rolling shutter of any size and any description including all connected fittings, gear box, crank handle etc complete all as specified and as directed by Engineer-in-Charge. | 80.00 | SQUARE METRE | 100.00 | Excess(+) | 1 | Full Conversion | INR | 0.00 | 0.00 | INR Zero Only | 32 | Material and labour for dismantling of rolling shutter of any size and any description including all connected fittings, gear box, crank handle etc complete all as specified and as directed by Engineer-in-Charge. | 80 | SQUARE METRE | |||||||||||||||||||||||||||||||||||||||
| 33 | Material and labour for 1.25mm thick steel rolling shutters, with ball bearing, gear operated type with bevel gear box and crank handle, safety lever locks mild steel with 4 levers including lock lever housing encasement of MS, duly embeded in floor for rolling shutters, with at least 1 perforated rolling shutters in each, gear operated type with bevel gear box and crank handle, top cover, anchoring rod, hasp and staple and one shop coat of primer, erected in position etc complete all as specified and as directed by Engineer-in-Charge. Make : M/s Swastik Rolling Shutters, Mumbai / M/s Shree Lakshmi Engg Wks, Bangalore / M/s Senthil Rolling Shutters & Engg Co, Chennai / M/s Jayaraj Industries, Chennai | 80.00 | SQUARE METRE | 10.00 | Excess(+) | 1 | Full Conversion | INR | 0.00 | 0.00 | INR Zero Only | 33 | Material and labour for 1.25mm thick steel rolling shutters, with ball bearing, gear operated type with bevel gear box and crank handle, safety lever locks mild steel with 4 levers including lock lever housing encasement of MS, duly embeded in floor for rolling shutters, with at least 1 perforated rolling shutters in each, gear operated type with bevel gear box and crank handle, top cover, anchoring rod, hasp and staple and one shop coat of primer, erected in position etc complete all as specified and as directed by Engineer-in-Charge. Make : M/s Swastik Rolling Shutters, Mumbai / M/s Shree Lakshmi Engg Wks, Bangalore / M/s Senthil Rolling Shutters & Engg Co, Chennai / M/s Jayaraj Industries, Chennai | 80 | SQUARE METRE | |||||||||||||||||||||||||||||||||||||||
| 34 | Taking down chowkats or frames with shutter (without taking off shutter from frame) exceeding 1.5 sqm but not exceeding 4 sqm each including fittings & removing clear off site after credit for the same is recovered by the dept complete all as specified and as directed by Engineer-in-Charge | 3.00 | EACH | 10.00 | Excess(+) | 1 | Full Conversion | INR | 0.00 | 0.00 | INR Zero Only | 34 | Taking down chowkats or frames with shutter (without taking off shutter from frame) exceeding 1.5 sqm but not exceeding 4 sqm each including fittings & removing clear off site after credit for the same is recovered by the dept complete all as specified and as directed by Engineer-in-Charge | 3 | EACH | |||||||||||||||||||||||||||||||||||||||
| 35 | Supply & Fix 12mm thick toughned glass as in hinged door, partitions, automatic doors and simillar work including cutting to shape, drilling holes as per requirement ( Glass opaque or as approved by GE) as per instructions complete all as specified and as directed by Engineer-in-Charge Make : Modiguard/Atul/Kohinoor/Swastik/Saint Gobain | 10.00 | SQUARE METRE | 10.00 | Excess(+) | 1 | Full Conversion | INR | 0.00 | 0.00 | INR Zero Only | 35 | Supply & Fix 12mm thick toughned glass as in hinged door, partitions, automatic doors and simillar work including cutting to shape, drilling holes as per requirement ( Glass opaque or as approved by GE) as per instructions complete all as specified and as directed by Engineer-in-Charge Make : Modiguard/Atul/Kohinoor/Swastik/Saint Gobain | 10 | SQUARE METRE | |||||||||||||||||||||||||||||||||||||||
| 36 | Supply and fix double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed ( Top and bottom included) complete all as specified and directed by Engineer-in-Charge. Note- (a) Stainless steel top notch ( Cat No. EPF-701)- 1 Set (b) Stailess steel top pivoted ( Cat No. EPF-712)- 01 Set included | 3.00 | EACH | 10.00 | Excess(+) | 1 | Full Conversion | INR | 0.00 | 0.00 | INR Zero Only | 36 | Supply and fix double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed ( Top and bottom included) complete all as specified and directed by Engineer-in-Charge. Note- (a) Stainless steel top notch ( Cat No. EPF-701)- 1 Set (b) Stailess steel top pivoted ( Cat No. EPF-712)- 01 Set included | 3 | EACH | |||||||||||||||||||||||||||||||||||||||
| 37 | Supply and fix Stainless steel Handle ( H type pair- 25mm Dia), 300mm long, glossy finish complete all as specified and directed by Engineer-in-Charge. | 3.00 | EACH | 10.00 | Excess(+) | 1 | Full Conversion | INR | 0.00 | 0.00 | INR Zero Only | 37 | Supply and fix Stainless steel Handle ( H type pair- 25mm Dia), 300mm long, glossy finish complete all as specified and directed by Engineer-in-Charge. | 3 | EACH | |||||||||||||||||||||||||||||||||||||||
| 38 | Supply and fix glass to glass door patch lock complete all as specified and directed by Engineer-in-Charge. | 3.00 | EACH | 10.00 | Excess(+) | 1 | Full Conversion | INR | 0.00 | 0.00 | INR Zero Only | 38 | Supply and fix glass to glass door patch lock complete all as specified and directed by Engineer-in-Charge. | 3 | EACH | |||||||||||||||||||||||||||||||||||||||
| 39 | Material and labour for granite (of any type) , 20mm thick, machine cut (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platform, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of mushroom granite stone including edge moulding to 18 mm thick stone of counters vanities etc. including machine polishing to edge to give high gloss finish etc, over and including 15mm thick cement mortar (1:4) complete all as specified and as directed. | 5.00 | SQUARE METRE | 10.00 | Excess(+) | 1 | Full Conversion | INR | 0.00 | 0.00 | INR Zero Only | 39 | Material and labour for granite (of any type) , 20mm thick, machine cut (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platform, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of mushroom granite stone including edge moulding to 18 mm thick stone of counters vanities etc. including machine polishing to edge to give high gloss finish etc, over and including 15mm thick cement mortar (1:4) complete all as specified and as directed. | 5 | SQUARE METRE | |||||||||||||||||||||||||||||||||||||||
| 40 | Dismantling of wall and ceiling board (fibre, pulp, insulation etc) or insulation boards/slabs/blankets of any type & any thickness including cover fillets & removing clear off site complete all as specified and as directed by Engineer-in-Charge. | 430.00 | SQUARE METRE | 10.00 | Excess(+) | 1 | Full Conversion | INR | 0.00 | 0.00 | INR Zero Only | 40 | Dismantling of wall and ceiling board (fibre, pulp, insulation etc) or insulation boards/slabs/blankets of any type & any thickness including cover fillets & removing clear off site complete all as specified and as directed by Engineer-in-Charge. | 430 | SQUARE METRE | |||||||||||||||||||||||||||||||||||||||
| 41 | Supply and fix anodised aluminium snap grid frame work for false ceiling conforming to IS 733, IS 737 and IS 1285 including all ceiling cleats, 4 mm dia GI wire suspender with necessary main tee 35.00 x 23.50 x 1.50mm, cross tee and wall angle of size 23.50 x 23.50 x 1.5 mm with 605 x 605 mm grid system including 12mm thick gypsum board for fixing in 600 x 600 mm grid system with all connected accessories suitably placed in false ceiling grid as per manufacture instruction complete with necessary design in single/double complete all as specified and as directed by Engineer-in-Charge. Make: Gypsum board /Arm Strong/Ramco/Bisan | 150.00 | SQUARE METRE | 10.00 | Excess(+) | 1 | Full Conversion | INR | 0.00 | 0.00 | INR Zero Only | 41 | Supply and fix anodised aluminium snap grid frame work for false ceiling conforming to IS 733, IS 737 and IS 1285 including all ceiling cleats, 4 mm dia GI wire suspender with necessary main tee 35.00 x 23.50 x 1.50mm, cross tee and wall angle of size 23.50 x 23.50 x 1.5 mm with 605 x 605 mm grid system including 12mm thick gypsum board for fixing in 600 x 600 mm grid system with all connected accessories suitably placed in false ceiling grid as per manufacture instruction complete with necessary design in single/double complete all as specified and as directed by Engineer-in-Charge. Make: Gypsum board /Arm Strong/Ramco/Bisan | 150 | SQUARE METRE | |||||||||||||||||||||||||||||||||||||||
| 42 | Supply and fix anodised aluminium snap grid frame work for false ceiling conforming to IS 733, IS 737 and IS 1285 including all ceiling cleats, 4 mm dia GI wire suspender with necessary main tee 35.00 x 23.50 x 1.50mm, cross tee and wall angle of size 23.50 x 23.50 x 1.5 mm with 605 x 605 mm grid system including exposed metal frame ceiling with 8mm thick calcium silicate board of siliceous and calcareous material reinforced with cellulose fiber for fixing in 600 x 600 mm grid system with all connected accessories suitably placed in false ceiling grid as per manufacture instruction complete with necessary design in single/double complete all as specified and as directed by Engineer-in-Charge. Make: Gypsum board /Arm Strong/Ramco/Bisan | 150.00 | SQUARE METRE | 10.00 | Excess(+) | 1 | Full Conversion | INR | 0.00 | 0.00 | INR Zero Only | 42 | Supply and fix anodised aluminium snap grid frame work for false ceiling conforming to IS 733, IS 737 and IS 1285 including all ceiling cleats, 4 mm dia GI wire suspender with necessary main tee 35.00 x 23.50 x 1.50mm, cross tee and wall angle of size 23.50 x 23.50 x 1.5 mm with 605 x 605 mm grid system including exposed metal frame ceiling with 8mm thick calcium silicate board of siliceous and calcareous material reinforced with cellulose fiber for fixing in 600 x 600 mm grid system with all connected accessories suitably placed in false ceiling grid as per manufacture instruction complete with necessary design in single/double complete all as specified and as directed by Engineer-in-Charge. Make: Gypsum board /Arm Strong/Ramco/Bisan | 150 | SQUARE METRE | |||||||||||||||||||||||||||||||||||||||
| 43 | Supply and fix solid PVC pre laminated wall lining consisting of 5mm thick plain colour PVC sheet inclusive of solvent cement and fixing at site on PVC frame as per specifications and drawing complete all as specified and directed by Engineer-in-Charge. Make- Rajshri/ GIZA/ Echon/ Accucel | 130.00 | SQUARE METRE | 10.00 | Excess(+) | 1 | Full Conversion | INR | 0.00 | 0.00 | INR Zero Only | 43 | Supply and fix solid PVC pre laminated wall lining consisting of 5mm thick plain colour PVC sheet inclusive of solvent cement and fixing at site on PVC frame as per specifications and drawing complete all as specified and directed by Engineer-in-Charge. Make- Rajshri/ GIZA/ Echon/ Accucel | 130 | SQUARE METRE | |||||||||||||||||||||||||||||||||||||||
| 44 | Supply & Fix 5mm thick PVC sheet fillet of width 35mm for wall panelling inclusive of fixing on to wall to make PVC Frame as per specification complete all as specified and as directed by Engineer-in-Charge. | 80.00 | RUNNING METRE | 10.00 | Excess(+) | 1 | Full Conversion | INR | 0.00 | 0.00 | INR Zero Only | 44 | Supply & Fix 5mm thick PVC sheet fillet of width 35mm for wall panelling inclusive of fixing on to wall to make PVC Frame as per specification complete all as specified and as directed by Engineer-in-Charge. | 80 | RUNNING METRE | |||||||||||||||||||||||||||||||||||||||
| 45 | Material and labour for venetian blinds,horizontal type of approved fabric and powder coated aluminium top rails etc including dismantlingof old damaged one complete all as specified and as directed by Engr-in-charge . Note:- The colour ,design and shade shall be as approved by GE . Make : Vista/Amar | 15.00 | SQUARE METRE | 10.00 | Excess(+) | 1 | Full Conversion | INR | 0.00 | 0.00 | INR Zero Only | 45 | Material and labour for venetian blinds,horizontal type of approved fabric and powder coated aluminium top rails etc including dismantlingof old damaged one complete all as specified and as directed by Engr-in-charge . Note:- The colour ,design and shade shall be as approved by GE . Make : Vista/Amar | 15 | SQUARE METRE | |||||||||||||||||||||||||||||||||||||||
| 46 | Note: Deduct Credit for demolished / dismantled material of Rs. (-) 69,000.00 (Minus) as listed in Schedule of Credit. Tenderers will not quote against this item being a tentative amount to be considered to arrive at the 'Contract Sum' | 46 | Note: Deduct Credit for demolished / dismantled material of Rs. (-) 69,000.00 (Minus) as listed in Schedule of Credit. Tenderers will not quote against this item being a tentative amount to be considered to arrive at the 'Contract Sum' | |||||||||||||||||||||||||||||||||||||||||||||||||||
| Total in Figures | 0.00 | 0.00 | INR Zero Only | |||||||||||||||||||||||||||||||||||||||||||||||||||
| Quoted Rate in Figures | Select | 0.0000 | 0.0000 | Zero Only | ||||||||||||||||||||||||||||||||||||||||||||||||||
| Quoted Rate in Words | INR Zero Only |
Andaman & Nicobar Tenders |Andhra Pradesh Tenders |Arunachal Pradesh Tenders |Assam Tenders |Bihar Tenders |Chandigarh Tenders |Chhattisgarh Tenders |Dadra & Nagar Haveli Tenders |Daman & Diu Tenders |Delhi Tenders |Goa Tenders |Gujarat Tenders |Haryana Tenders |Himachal Pradesh Tenders |Jammu & Kashmir Tenders |Jharkhand Tenders |Karnataka Tenders |Kerala Tenders |Ladakh Tenders |Lakshadweep Tenders |Madhya Pradesh Tenders |Maharashtra Tenders |Manipur Tenders |Meghalaya Tenders |Mizoram Tenders |Nagaland Tenders |Odisha Tenders |Pondicherry Tenders |Punjab Tenders |Rajasthan Tenders |Sikkim Tenders |Tamil Nadu Tenders |Telangana Tenders |Tripura Tenders |Uttarakhand Tenders |Uttar Pradesh Tenders |West Bengal Tenders |