Items - Renovation/Upgradation of 03 nos 120 men Jawan Barrack at 34Bn ITBP, Halduchaur, Haldwani (UKD)
| Percentage BoQ | ||||||||||||||||||||||||||||||||||||||||||||||||||||||
| BoQ_Ver4.0 | Percentage | Normal | INR Only | INR | ||||||||||||||||||||||||||||||||||||||||||||||||||
| Select, At Par, Excess (+), Less (-) | IOCL | Select | Excess (+) | Less (-) | Excess (+) | Less (-) | ||||||||||||||||||||||||||||||||||||||||||||||||
| Tender Inviting Authority: Commandant Engineer SHQ LUCKNOW ITBP | ||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Name of Work:Renovation /Upgradation of 03 Nos 120 Men Jawan Barrack at 34th Bn ITB Police Halduchour, Haldawani(UKD) | ||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Contract No: ITBP/SHQ(LKO)/ENGR/34BN/15/2025-26-2471-74 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Name of the Bidder/ Bidding Firm / Company : | ||||||||||||||||||||||||||||||||||||||||||||||||||||||
| PRICE SCHEDULE (This BOQ template must not be modified/replaced by the bidder and the same should be uploaded after filling the relevent columns, else the bidder is liable to be rejected for this tender. Bidders are allowed to enter the Bidder Name and Values only ) | ||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Sl. No. | Item Description | Item Code / Make | Quantity | Units | Estimated Rate in Rs. P | Addition / Deduction | Addition / Deduction Values | Currency Convertion against each Item | Quoted Currency in INR / Other Currency | BASIC RATE In Figures To be entered by the Bidder Rs. P | Excise Duty | VAT | Freight Charges ( Unloading & Stacking) | Any Other Taxes/Duties/Levies | Other Taxes 2 | IIIrd Party i.e DGS&D / RITES etc Inspection Charges @0.34%+Service Tax | Less for Cenvat Credit,if any respect of Supplies Under full Excise Duty Category | TOTAL AMOUNT Without Taxes in Rs. P | TOTAL AMOUNT inclusive of all Taxes in Rs. P | TOTAL AMOUNT In Words | ||||||||||||||||||||||||||||||||||
| 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 10 | 11 | 12 | 13 | 14 | 15 | 16 | 17 | 18 | 19 | 20 | 21 | 22 | 23 | 24 | 25 | 26 | 27 | 28 | 29 | 30 | 31 | 32 | 33 | 34 | 35 | 36 | 37 | 38 | 39 | 40 | 41 | 42 | 43 | 44 | 45 | 46 | 47 | 48 | 49 | 50 | 51 | 52 | 53 | 54 | 55 |
| 1 | Providing and fixing ready made 304 grade stainless steel Modular kitchen basket and accessories such as right angle basket (Plain Cup & Saucer,plant, Partition, Bottle rack, Thali, Cutlery) kitchen utensil basket, Dinner set basket, kitchen grain basket, Multipurpose basket as per site requirement including finishing (wherever required) and fittings. The same shall be fixed with necessary stainless steel nuts & bolts, Stainless Steel screws & telescopic channel etc. as per direction of Engineer-incharge. (For payment purpose only weight of Stainless steel basket shall be considered excluding weight of all fixing accessories such as nuts, bolts, fasteners telescopic basket channels etc. Payment of providing and fixing telescopic channel shall be paid separately). | BI01010001010000000000000515BI0100001113 | 117.00 | Kg | 596.40 | Excess(+) | 1 | Full Conversion | INR | 69778.80 | 69778.80 | INR Sixty Nine Thousand Seven Hundred Seventy Eight & Paise Eighty Only | 1.01 | Supplying, Conveying and fixing spls. Including eart | item1 | 123.223 | Nos | |||||||||||||||||||||||||||||||||||||
| 2 | Providing and fixing stainless steel soft closing heavy type telescopic drawer channels of approved make 500 mm long with screws etc. complete as per directions of Engineer- in-charge. | 18.00 | Set | 990.00 | Excess(+) | 1 | Full Conversion | INR | 17820.00 | 17820.00 | INR Seventeen Thousand Eight Hundred Twenty & Paise Zero Only | |||||||||||||||||||||||||||||||||||||||||||
| 3 | Providing and fixing stainless steel fancy handle of approved make fixed with SS screws etc. complete as per direction of Engineer-in-charge. 200 mm. | 96.00 | Nos | 208.80 | Excess(+) | 1 | Full Conversion | INR | 20044.80 | 20044.80 | INR Twenty Thousand Forty Four & Paise Eighty Only | |||||||||||||||||||||||||||||||||||||||||||
| 4 | Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) : For fixed portion Anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC 15) | 948.08 | Kg | 553.70 | Excess(+) | 1 | Full Conversion | INR | 524951.90 | 524951.90 | INR Five Lakh Twenty Four Thousand Nine Hundred Fifty One & Paise Ninety Only | |||||||||||||||||||||||||||||||||||||||||||
| 5 | Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item): With float glass panes of 5 mm thickness (weight not less than 12.50 kg/sqm) | 28.22 | SQM | 1683.60 | Excess(+) | 1 | Full Conversion | INR | 47511.19 | 47511.19 | INR Forty Seven Thousand Five Hundred Eleven & Paise Nineteen Only | |||||||||||||||||||||||||||||||||||||||||||
| 6 | Providing and fixing 100mm brass locks (best make of approved quality) for aluminium doors including necessary cutting and making good etc. complete. | 3.00 | Nos | 591.50 | Excess(+) | 1 | Full Conversion | INR | 1774.50 | 1774.50 | INR One Thousand Seven Hundred Seventy Four & Paise Fifty Only | |||||||||||||||||||||||||||||||||||||||||||
| 7 | Providing and fixing anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868. Minimum anodic coating of grade AC 15) sub frame work for windows and ventilators with extruded built up standard tubular sections of approved make conforming to IS: 733 and IS: 1285, fixed with dash fastener of required dia and size (Dash fastener to be paid for separately). | 288.50 | Kg | 450.50 | Excess(+) | 1 | Full Conversion | INR | 129969.25 | 129969.25 | INR One Lakh Twenty Nine Thousand Nine Hundred Sixty Nine & Paise Twenty Five Only | |||||||||||||||||||||||||||||||||||||||||||
| 8 | Providing and fixing aluminium extruded section body tubular type universal hydraulic door closer (having brand logo with ISi, IS : 3564, embossed on the body, door weight upto 36 kg to 80 kg and door width from 701 mm to 1000 mm), with double speed adjustment with necessary accessories and screws etc. complete. | 3.00 | Nos | 1099.60 | Excess(+) | 1 | Full Conversion | INR | 3298.80 | 3298.80 | INR Three Thousand Two Hundred Ninety Eight & Paise Eighty Only | |||||||||||||||||||||||||||||||||||||||||||
| 9 | Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead. | 66.53 | Sqm | 61.10 | Excess(+) | 1 | Full Conversion | INR | 4064.98 | 4064.98 | INR Four Thousand Sixty Four & Paise Ninety Eight Only | |||||||||||||||||||||||||||||||||||||||||||
| 10 | 15 mm cement plaster on rough side of single or half brick wall of mix (1 cement: 4 coarse sand) | 66.54 | SQm | 460.50 | Excess(+) | 1 | Full Conversion | INR | 30641.67 | 30641.67 | INR Thirty Thousand Six Hundred Forty One & Paise Sixty Seven Only | |||||||||||||||||||||||||||||||||||||||||||
| 11 | Wall painting with premium acrylic emulsio paint of interior grade having VOC content less than 50 gms/litre, of approved manufacturer,including applying additional coats wherever required to achive even shade and colour. Old work (Two coats) | 1432.20 | SQM | 159.70 | Excess(+) | 1 | Full Conversion | INR | 228722.34 | 228722.34 | INR Two Lakh Twenty Eight Thousand Seven Hundred Twenty Two & Paise Thirty Four Only | |||||||||||||||||||||||||||||||||||||||||||
| 12 | Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping, sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete.) | 1002.54 | SQM | 28.10 | Excess(+) | 1 | Full Conversion | INR | 28171.37 | 28171.37 | INR Twenty Eight Thousand One Hundred Seventy One & Paise Thirty Seven Only | |||||||||||||||||||||||||||||||||||||||||||
| 13 | Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. | 66.53 | SQM | 174.50 | Excess(+) | 1 | Full Conversion | INR | 11609.49 | 11609.49 | INR Eleven Thousand Six Hundred Nine & Paise Forty Nine Only | |||||||||||||||||||||||||||||||||||||||||||
| 14 | Dismantling stone slab flooring laid in cement mortar including stacking of serviceable material and disposal of unserviceable materialwithin 50 metres lead. | 26.91 | SQM | 298.00 | Excess(+) | 1 | Full Conversion | INR | 8019.18 | 8019.18 | INR Eight Thousand Nineteen & Paise Eighteen Only | |||||||||||||||||||||||||||||||||||||||||||
| 15 | Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead. For thickness of tiles 10 mm to 25 mm | 19.50 | SQM | 82.10 | Excess(+) | 1 | Full Conversion | INR | 1600.95 | 1600.95 | INR One Thousand Six Hundred & Paise Ninety Five Only | |||||||||||||||||||||||||||||||||||||||||||
| 16 | Kota stone slabs 20 mm thick in risers of steps, skirting, dado and pillars laid on 12 mm (average) thick cement mortar 1:3 (1 cement: 3 coarse sand) and jointed with grey cement slurry mixed with pigment to match the shade of the slabs, including rubbing and polishing complete. | 26.91 | SQM | 2633.60 | Excess(+) | 1 | Full Conversion | INR | 70870.18 | 70870.18 | INR Seventy Thousand Eight Hundred Seventy & Paise Eighteen Only | |||||||||||||||||||||||||||||||||||||||||||
| 17 | Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm,including pointing in white cement mixed with pigment of matching shade complete. | 92.08 | SQM | 1418.20 | Excess(+) | 1 | Full Conversion | INR | 130587.86 | 130587.86 | INR One Lakh Thirty Thousand Five Hundred Eighty Seven & Paise Eighty Six Only | |||||||||||||||||||||||||||||||||||||||||||
| 18 | Providing and fixing aluminium tower bolts ISI marked anodised (anodic coating not less than grade AC 10 as per IS:1868) transparent or dyed to required colour or shade with necessary screws etc . Complete : 100x10MM | 6.00 | Nos | 72.40 | Excess(+) | 1 | Full Conversion | INR | 434.40 | 434.40 | INR Four Hundred Thirty Four & Paise Forty Only | |||||||||||||||||||||||||||||||||||||||||||
| 19 | Providing and fixing chromium plated brass butt hinges with necessary chromium plated brass screws etc. complete.75x40x2.5 mm (ordinary type) | 9.00 | Nos | 114.80 | Excess(+) | 1 | Full Conversion | INR | 1033.20 | 1033.20 | INR One Thousand Thirty Three & Paise Twenty Only | |||||||||||||||||||||||||||||||||||||||||||
| 20 | Providing and fixing soft closing concealed hinges stainless steel (Approved brand) in aluminium door, window, ventilator shutters and partitions etc. complete as per the directions of engineer-in-charge . | 144.00 | Nos | 304.20 | Excess(+) | 1 | Full Conversion | INR | 43804.80 | 43804.80 | INR Forty Three Thousand Eight Hundred Four & Paise Eighty Only | |||||||||||||||||||||||||||||||||||||||||||
| 21 | Providing and fixing aluminium composite sheet (Approved brand) in aluminium door, window, ventilator shutters and partitions etc. complete as per the directions of engineer-in-charge . With aluminium sheet of 3 mm thickness. (In this, the ACP panel contain, 0.21 to 0.25 mm thick aluminium alloy coil along with a 2.5mm core. the thin coil is of the same thickness in the bottom and top layer above which there is either a two- coat or three-coats PVDF paint coating along with the protective film) | 143.71 | SQM | 4351.20 | Excess(+) | 1 | Full Conversion | INR | 625310.95 | 625310.95 | INR Six Lakh Twenty Five Thousand Three Hundred Ten & Paise Ninety Five Only | |||||||||||||||||||||||||||||||||||||||||||
| 22 | Providing and fixing Magnate (Approved brand) in aluminium door, window, ventilator shutters and partitions etc. complete as per the directions of engineer-in-charge . | 90.00 | Nos | 388.70 | Excess(+) | 1 | Full Conversion | INR | 34983.00 | 34983.00 | INR Thirty Four Thousand Nine Hundred Eighty Three & Paise Zero Only | |||||||||||||||||||||||||||||||||||||||||||
| Total in Figures | 2035003.61 | 2035003.61 | INR Twenty Lakh Thirty Five Thousand Three & Paise Sixty One Only | 4 | Construction of chamber for 100mm sluice plates | item5 | 10 | Nos | ||||||||||||||||||||||||||||||||||||||||||||||
| Quoted Rate in Figures | Select | 0.00 | 0.00 | INR Zero Only | ||||||||||||||||||||||||||||||||||||||||||||||||||
| Quoted Rate in Words | INR Zero Only |
Andaman & Nicobar Tenders |Andhra Pradesh Tenders |Arunachal Pradesh Tenders |Assam Tenders |Bihar Tenders |Chandigarh Tenders |Chhattisgarh Tenders |Dadra & Nagar Haveli Tenders |Daman & Diu Tenders |Delhi Tenders |Goa Tenders |Gujarat Tenders |Haryana Tenders |Himachal Pradesh Tenders |Jammu & Kashmir Tenders |Jharkhand Tenders |Karnataka Tenders |Kerala Tenders |Ladakh Tenders |Lakshadweep Tenders |Madhya Pradesh Tenders |Maharashtra Tenders |Manipur Tenders |Meghalaya Tenders |Mizoram Tenders |Nagaland Tenders |Odisha Tenders |Pondicherry Tenders |Punjab Tenders |Rajasthan Tenders |Sikkim Tenders |Tamil Nadu Tenders |Telangana Tenders |Tripura Tenders |Uttarakhand Tenders |Uttar Pradesh Tenders |West Bengal Tenders |