| DELHI METRO RAIL CORPORATION LIMITED |
| BOQ |
| Name of Work:- OCM- 2010 - Annual Maintenance Contract (AMC) for civil work from Inderlok-5/ Kirti Nagar-5 Metro Station to Paschim Vihar East Metro Station for three years. |
| DSR-Item Codes | Description of Item | Unit | Quantity | Rate excluding GST (Rs.) | Amount excluding GST (Rs,) |
| Schedule-A DSR-2023 |
| Sub Head A1, DSR-2023 (Chapter 1 to chapter 5) | 2500000.00 |
| Sub Head A2, DSR-2023 (Chapter 6 to chapter10) | 5500000.00 |
| Sub Head A3, DSR-2023 (Chapter 11 to chapter 15) | 10000000.00 |
| Sub Head A4, DSR-2023 (Chapter 16 to chapter 20) | 4000000.00 |
| Sub Head A5, DSR-2023 (Chapter 21 to chapter 26) | 1500000.00 |
| TOTAL of Schedule-A (DSR 2023) (exclusive of GST) | 23500000.00 |
| TOTAL of Schedule-A (DSR 2023) after correction factor @ 0.973 as per CPWD circular | 22865500.00 |
| Add GST @18% | 4115790.00 |
| Total of DSR 2023-Items Schedule-A (inclusive of all taxes) | 26981290.00 |
| NDSR Items | Description of Item | Unit | Quantity | Rate excluding GST (Rs.) | Amount excluding GST (Rs,) |
| Schedule-B-NDSR Items |
| NDSR-1 | Providing and fixing 12 mm thick laminated glass consisting of 6.0 mm thick (+ or -0.3) thick clear toughened glass on both faces having 1.52 PVB layer in between including provision of EPDM gasket performed all spacers, desiccants, silicon sealants etc. as per manufactures specifications , drawings & directions of engineer in charge (area of glass unit outside the snap beading shall be measured). | Sqm | 50.00 | 3803.72 | 190186.00 |
| NDSR-2 | Providing hardware or other parts for smooth functioning of rolling shutter. Items will be supplied as per CPWD specifications. |
| NDSR-2a | Brackets(Sides). | Each | 60.00 | 320.86 | 19251.60 |
| NDSR-2b | Wire Spring | Each | 50.00 | 459.63 | 22981.50 |
| NDSR-2c | Spring Holder. | Each | 50.00 | 160.42 | 8021.00 |
| NDSR-2d | MS-Gararee device. | Each | 50.00 | 1283.39 | 64169.50 |
| NDSR-2e | Gear Box. | Each | 50.00 | 3208.48 | 160424.00 |
| NDSR-2f | Rolling Shutter Handle. | Each | 50.00 | 192.50 | 9625.00 |
| NDSR-2g | Locking Naka/kundee including welding. | Each | 50.00 | 64.18 | 3209.00 |
| NDSR-2h | Ball Bearing | Each | 50.00 | 219.46 | 10973.00 |
| NDSR-2i | Gararee Rod. | Each | 50.00 | 770.03 | 38501.50 |
| NDSR-2j | MS-Top Cover. | Mtr | 60.00 | 1538.01 | 92280.60 |
| NDSR-2k | Bottom Locking rail | Mtr | 50.00 | 1767.49 | 88374.50 |
| NDSR-2l | M.S.Laths | Mtr | 50.00 | 282.78 | 14139.00 |
| NDSR-2m | MS Pipe shaft 2" dia | Mtr | 50.00 | 1280.53 | 64026.50 |
| NDSR-2n | Side guide Rail. | Mtr | 50.00 | 853.67 | 42683.50 |
| NDSR-2o | Rolling Shutter lever lock | Each | 50.00 | 1159.88 | 57994.00 |
| NDSR-3 | Supply of sky lift on hire charges basis 20 mtr long boom for 8 hours (per day) including operators, all arrangement of safety,barricades,Traffic marshal etc.all complete as per direction of engineer-in-charge. | Per Shift (8 Hrs.) | 100.00 | 5179.42 | 517942.00 |
| NDSR-4 | Providing and fixing of hilti frame anchor fasteners HRD-C-2 10x160 including making & cleaning hole in concrete/granite and using all T&P etc. Complete or as per direction of engineer in charge. | Each | 100.00 | 185.98 | 18598.00 |
| NDSR-5 | Providing and fixing 6mm thick toughened glass in existing frames, sub frames with EPDM rubber gasket, silicon sealant and necessary pressure clip as and where required. The rate quoted shall be inclusive of fixing and grinding corners and required holes etc. all complete and all taxes etc. The contractor shall visit the site and take exact measurement of size in which glass is to be provided at various locations. | Sqm | 50.00 | 1995.34 | 99767.00 |
| NDSR-6 | Providing,cutting and fixing Hilti Chemical fastener using threaded Hilti Rod AM 12x3000 of grade 8.8 Zinced and fixing with HILTI Chemical grout RE 500 V3 including cutting the rod to required length of 160mm, providing necessary nut, washer, drilling of hole in RCC, Concrete or brick masonary, cleaning the hole with blow out pump, fixing the fastene with chemical grout using chemical injecting gun etc. complete as per direction of Engineer-in-charge. Payment shall be made for each bolt of 160mm length with one nut and washer all complete. (Work during block hours in night) Rates are inclusive of GST and Carriage. | Each | 10.00 | 371.36 | 3713.60 |
| NDSR-7 | Providing and fixing Hilti Chemical fastener HIT-V-5.8, M12x220mm of 12mm dia including injecting HIT-RE 500 V3 chemical grout using injection gun including drilling of hole in RCC, concrete or brick masonry, cleaning the hole with pump, fixing the fastener, injecting the chemical etc. as per direction of Engineer-in-Charge (Work during block hours in night rates are inclusive of GST and Carraige. | Each | 10.00 | 512.47 | 5124.70 |
| NDSR-8 | Providing and fixing Hilti Chemical fastener HIT-V-5.8, M16x260mm of 16mm dia including injecting HIT-RE 500 V3 chemical grout using injection gun including drilling of hole in RCC, concrete or brick masonry, cleaning the hole with pump, fixing the fastener, injecting the chemical etc. as per direction of Engineer-in-Charge (Work during block hours in night0 rates are inclusive of GST and Carraige. | Each | 10.00 | 893.32 | 8933.20 |
| NDSR-9 | Providing and fixing CPVC union in CPVC pipe (Astral/Ashirwad) including cutting and threading the pipe making long screw etc. complete. |
| NDSR-9a | 15mm nominal bore | Each | 300.00 | 48.81 | 14643.00 |
| NDSR-9b | 20mm nominal bore | Each | 300.00 | 46.93 | 14079.00 |
| NDSR-9c | 25mm nominal bore | Each | 300.00 | 58.19 | 17457.00 |
| NDSR-9d | 32mm nominal bore | Each | 300.00 | 67.58 | 20274.00 |
| NDSR-9e | 40mm nominal bore | Each | 300.00 | 75.45 | 22635.00 |
| NDSR-9f | 50mm nominal bore | Each | 300.00 | 131.42 | 39426.00 |
| NDSR-10 | Providing and fixing CPVC ball valve (Astral/Ashirwad) in CPVC pipe including cutting and threading the pipe making long screw etc. complete. |
| NDSR-10a | 20mm nominal bore | Each | 20.00 | 112.64 | 2252.80 |
| NDSR-10b | 25mm nominal bore | Each | 50.00 | 138.90 | 6945.00 |
| NDSR-10c | 32mm nominal bore | Each | 50.00 | 187.73 | 9386.50 |
| NDSR-10d | 40mm nominal bore | Each | 100.00 | 262.82 | 26282.00 |
| NDSR-10e | 50mm nominal bore | Each | 100.00 | 450.55 | 45055.00 |
| NDSR-11 | Providing and fixing CPVC male Adaptor brass threaded (MTA) of approved quality: |
| NDSR-11a | 20mm nominal bore | Each | 100.00 | 134.70 | 13470.00 |
| NDSR-11b | 25mm nominal bore | Each | 100.00 | 193.66 | 19366.00 |
| NDSR-11c | 32mm nominal bore | Each | 100.00 | 363.98 | 36398.00 |
| NDSR-11d | 40mm nominal bore | Each | 100.00 | 445.60 | 44560.00 |
| NDSR-11e | 50mm nominal bore | Each | 100.00 | 825.54 | 82554.00 |
| NDSR-12 | Providing and fixing of bulk type water meter Class B Flanged type with CI body with dry Dial type & Magnetic Drive make KRANTI or equivelent conforming to IS 2373. The rates include all cost of material , labour, Transportation, tool & plants, all height, Taxes etc as per direction of Engineer in Charge of size: |
| NDSR-12a | 50mm | Each | 80.00 | 4747.58 | 379806.40 |
| NDSR-12b | 65mm | Each | 40.00 | 7051.06 | 282042.40 |
| NDSR-13 | Providing and fixing C.I. dirt box strainer for bulk type dry dial and magnetic drive water meter with nuts, bolts, rubber insertions etc. The rates include all cost of material, labour, transportation, tool & plants, all height, Taxes etc as per direction of Engineer in Charge of Size: |
| NDSR-13a | 50mm | Each | 80.00 | 1229.77 | 98381.60 |
| NDSR-13b | 65mm | Each | 40.00 | 1594.37 | 63774.80 |
| NDSR-14 | Providing and fixing PVC P-trap/multi-trap/Nahani-trap of 110mm dia. for kitchen/bathroom with demolishing of kota stone/cement concrete flooring of required area or up to 1.0 sqm for rectification of seepages and repairing the same as above, including the cost of materials i.e. PVC P-trap/multi-trap/Nahani trap, solvent, piece of PVC pipe, Kota stone, cement concrete or other materials, labour charges, taxes etc. complete as per direction of Engineer-in-charge. | Each | 100.00 | 893.59 | 89359.00 |
| NDSR-15 | Providing and fixing UPVC/CPVC Female brass thread Tee (FBT Tee) of approved quality :15mm nominal bore | Each | 100.00 | 116.39 | 11639.00 |
| NDSR-16 | Providing and fixing UPVC/CPVC Female brass thread Elbow (FBT Elbow) of approved quality :15mm nominal bore | Each | 100.00 | 93.86 | 9386.00 |
| NDSR-17 | Providing and fixing of high pressure laminated board confirming to code BS EN-438-2015 of 12mm thickness for partition and doors with all necessary fittings, fastners, screws and rubber strip for the groove in the pilaster for reducing noice level of door closing etc required as per approve design and colour and direction of engineer incharge. | Sqm | 50.00 | 2874.83 | 143741.50 |
| NDSR-18 | Repairing of door by taking out of the door and refixing and the same after the sawing ,screwing,nailing as required to repair and free movement of door. | Each | 80.00 | 68.75 | 5500.00 |
| NDSR-19 | Extra for painting work above 6.0meter height for each coat of priming/painting work | Sqm | 40000.00 | 21.84 | 873600.00 |
| NDSR-20 | Providing and fixing 2 mm thick textures, ultra violet quoted polycarbonate sheeting in required shape as per existing profile in roofing above platform level at line-5 stations laxane make or equivalent including all tools, materials, labours, safety equipments etc. all complete as per direction of engineer in charge. (make - as per approved list) | Sqm | 50.00 | 1878.69 | 93934.50 |
| NDSR-21 | Providing and fixing on wall face unplasticised Rigid PVC rain water pipes (working pressure 6 kg /cm^2) conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes. |
| NDSR-21a | 160 mm Diameter | Mtr | 500.00 | 463.48 | 231740.00 |
| NDSR-21b | 200 mm Diameter | Mtr | 100.00 | 1587.73 | 158773.00 |
| NDSR-22 | Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion. |
| NDSR-22a | 200 mm x 100 mm Dia. Reducer Tee | Each | 100.00 | 1732.73 | 173273.00 |
| NDSR-22b | 200 mm x 200 mm Dia. Bend | Each | 100.00 | 623.49 | 62349.00 |
| NDSR-23 | Providing & Fixing CONCEALED CISTERN BODY (Make Jaquar JCSWHT-2400)
MATERIAL | Each | 50.00 | 4030.51 | 201525.50 |
| NDSR-24 | Providing & Fixing Urinal-Flat Back Half (make Hindware Cat.no.60010) | Each | 10.00 | 13878.81 | 138788.10 |
| NDSR-25 | Providing & Fixing URINAL VALVE AUTO CLOSING SYSTEM WITH BULTIN CONTROL COCK & WALL FLANGE WITH FLOW RESTRICTOR 1.5 LPM AT 3 BAR PRESSURE (Make Jaquar PRSCHR-077G*) | Each | 50.00 | 1772.19 | 88609.50 |
| NDSR-26 | Providing & Fixing Wash Basin-Oval Under-Counter (Make Jaquar CNS-WHT-705) | Each | 50.00 | 2577.97 | 128898.50 |
| NDSR-27 | Providing & Fixing Wash Basin-Anugular Stop Cock (Make Jaquar Con-059KN | Each | 50.00 | 851.69 | 42584.50 |
| NDSR-28 | Removing of poster/banner from metro pier by scrapping by wire brush or by any other mean upto height of 3 m from cras barrier top as per direction of engineer -incharge. | Each | 200.00 | 628.44 | 125688.00 |
| NDSR-29 | Providing & Fixing Pillar Angle Valve- Angular Stop Cock with Fall Flange (Make Jaquar OPP-15053PM) | Each | 50.00 | 995.76 | 49788.00 |
| NDSR-30 | Providing & Fixing Pillar Clock- PILLAR COCK AUTO CLOSING SYSTEM WITH FLOW RESTRICTOR OF 1.3 LPM AT 3 BAR PRESSURE ( Make Jaquar PRSCHR-031GE) | Each | 50.00 | 2042.37 | 102118.50 |
| NDSR-31 | Providing & Fixing PVC Connection- Braided Hose ( Make Jaquar ALD-805B) | Each | 50.00 | 278.81 | 13940.50 |
| NDSR-32 | Providing & Fixing Waste Coupling - fully threaded, 32 mm dia ( Make Jaquar ALD-705) | Each | 50.00 | 505.65 | 25282.50 |
| NDSR-33 | Providing & Fixing Curved shaped urinal partition with frosted glass (Make JAQUAR JSE-CHR-810UC450X | Each | 25.00 | 4570.34 | 114258.50 |
| NDSR-34 | Apply rust converter to steel reinforcement to protect against further corrosion. | Sqm | 900.00 | 77.39 | 69651.00 |
| NDSR-35 | Providing and erecting the safety net of opening 75mm*75mm size at first floor level to prevent the debris falling on ground during progress of work and keeping the same in position during the entire period of work .(One time payment shall be made for providing net from start of work till completion of work including shifting if any. The Scaffolding net shall be the property of the DMRC on completion
of the work).
| Sqm | 100.00 | 209.46 | 20946.00 |
| NDSR-36 | Supply of Micro concrecte chemical in 25 kg bag and applying at site as per manufacturere specification and direction of Engineer in Charge. | Per bag
| 600.00 | 293.00 | 175800.00 |
| NDSR-37 | Providing safety and traffic diversion arrangement at the location of work with two stage protection that is with Concrete barriers and PVC drum filled with Sand/Water. The item shall include transportation and placing in position of concrete barriers (06 nos. concrete barriers of size 2.5-3m (length) and 1.2 m height) and suitable nos. of drums as per approved plan and direction of Engineer-in-charge. The concrete barriers will be provided by DMRC (which will be required to be lifted by contractor from any DMRC site within NCR), whereas all other materials are to be provided by contractor. The item shall include all labour/material cost for filling of drums, providing reflective lights, reflective tapes, caution tapes, 02 nos. marshals for traffic diversion and any other miscellaneous item(s). The marshals shall remain available from the start of work at the location, till the location is cleared completely of all men and material. On completion of work, concrete barriers will have to be returned to DMRC and placed as per directed location.
Nothing shall be paid extra for all the works described in this item. | EACH
LOCATION | 10.00 | 8293.56 | 82935.60 |
| NDSR-38 | Providing and injection Dr. Fixit PU Foam Injection two component polyurethene form injection grout manufacture by Pidilite Industry Ltd and to be sile mixed in ratio 10:1(10 part base I part hardener / or equivalent. that shall be injectectd with maechanically piston driven pump with maximum pressure uplo 250 bar or Foam shall be based on MDI)Methylene Diphenyl isocyanate) polyurethene pre-polymer and accelator. The system shall reacts when it comes in contact with water, producing a relatively stiff and insert polyurethane foam. It is a 10% solid and solvent free polyurethane grout for quick temerary closing and sealing of water bearing cracks, cavities and leak under hydrostatic pressure. The systems shall be foams to 30-40 times its volue in the presence of water and can be an effective means of arresting running water and seepage. It includes the cost of PU lubricant also.Rate Inclusive of all taxes. | Per Kg | 200.00 | 1484.80 | 296960.00 |
| NDSR-39 | Providing and Injecting Dr. fixit or fosroc PU plain injection, two component polyurethene plain injection grout manufactured and to be sile mixed in ratio 2:1 (2 part base 1 part hardener )/ that shall be injected with mechanically piston driven pump with maximum pressure upto 250 bar or as per the requirement of the site at a distance of 300mm C/C in all direction. The PU plain shall be low viscosity, high penetration quick setting and should forms tough and flexible polyurethene rubber after complete chemical reaction with or without water. It includes the cost of PU lubricant. Rate inclusive all of providing, fixing, cutting of non return packers of required size and repairing the surface with polymer mortar complete at all heights | Per Kg | 200.00 | 1824.62 | 364924.00 |
| NDSR-40 | Supplying and Installation as Specified the following as per direction of Engineer-in-charge, including all taxes and dues applicable |
| NDSR-40a | Water type check valve 100mm dia of Odco, sant, kirloskar or equivalent make confirming to PN-10. | Each | 10.00 | 1283.97 | 12839.70 |
| NDSR-40b | Pressure gauge with isolating valve of 10mm dia confirming to IS 3624 of H-Guru, Dan-Fuss or equivalent makes | Each | 10.00 | 555.29 | 5552.90 |
| NDSR-41 | Supply of submersible pump set with 4 HP, 3 phase, 440 volt, 50 Hz motor 10 stage pump suitable for 80 feet water level and discharge 1800 ltr/hr modele no. CORA- 12C/') make - KSB including anti falling GI wire for holding the borewell motor into the existing borewell. | Each | 15.00 | 16248.62 | 243729.30 |
| NDSR-42 | Supply and erection of 2.5 sqmm submersible cable make- Finolex, CCI, skyone The rates are inclusive of all taxes and duties complete. | RM | 600.00 | 56.05 | 33630.00 |
| NDSR-43 | Supply, erection, testing and commissioning of electrical panal made of 114/16 SWG CRC sheet duly wired up along with the following items The rates are inclusive of all taxes and duties complete. |
| a | Ammeter | Each | 15.00 | 6032.94 | 90494.10 |
| b | Voltmeter |
| c | Single phase preventer |
| d | DOL starter |
| e | MCB |
| f | On/Off push botton |
| g | On/Off indication lamps |
| h | Timer |
| i | Solonid valve |
| NDSR-44 | Lowering of pump submersible into the existing bore as per direction of Engineer in charge . The rates are inclusive of all taxes and duties complete. | Job | 15.00 | 822.72 | 12340.80 |
| NDSR-45 | Providing and fixing ISI mark 4 x 2.5 sqmm. Copper conductor armoured cable. All work shall be carried out as per direction from Engineer-in-charge. The rates are inclusive of all taxes and duties complete. | RM | 75.00 | 98.67 | 7400.25 |
| NDSR-46 | Providing & fixing of bulk water meter Class B flanged type with CI body with dry dial type & Magnetic drive make Kranti or equivilant conferming to IS:2373. The rate include all cost of material, labour , transportation, tools & plant , all height , Taxes etc as per direction engineer in charged |
| a | 40mm | Each | 5.00 | 6532.19 | 32660.95 |
| b | 50mm | Each | 20.00 | 7130.03 | 142600.60 |
| c | 65mm | Each | 20.00 | 10589.47 | 211789.40 |
| NDSR-47 | Miscellaneous civil works like cleaning of ground rain water drain, meshes, minor repairing of drains, meshes, manhole covers etc. The rates are inclusive of all taxes and duties complete. | Each | 35.00 | 3516.44 | 123075.40 |
| NDSR-48 | Lifting of pump set from the existing bore as per direction of Engineer in charge . The rates are inclusive of all taxes and duties complete. | Job | 15.00 | 792.37 | 11885.55 |
| NDSR-49 | Providing and operating diesel boom lift for 25-28 m reach. Rate shall included disel charges, one operator with all safety items, including loading/unloading of lift a site, traffic marshal and safety equipments. Rate is excluding of GST but including all other applicable charges | per shift of 8 hrs | 20.00 | 7528.00 | 150560.00 |
| NDSR-50 | Cleaning/desilting of platform saucer drain by removing of saucer drain cover and refixing of same after cleaning work | RM | 1000.00 | 22.17 | 22170.00 |
| NDSR-51 | Reviving of RWH pit upto 10 cubic meter capacity by replacing old filter media with new one . This item has rate inclusive of clearing choking of embeded PVC slotted pipe & Cleaning of de-silting chamber for RWH pit | Each | 5.00 | 103200.00 | 516000.00 |
| NDSR-52 | Reviving of RWH pit upto 10 cubic meter capacity by cleaning/screening old filter media. This item has rate inclusive of clearing choking of embeded PVC slotted pipe & Cleaning of de-silting chamber for RWH pit | Each | 8.00 | 62000.00 | 496000.00 |
| TOTAL of Schedule-B (excluding of GST) | 8788429.85 |
| Add GST @18% | 1581917.37 |
| Grand Total Schedule-B (inclusive of all taxes) | 10370347.22 |
| Schedule- C (NDSR- Manpower):- Providing Skilled/Unskilled labours (Restricted and Non restricted hour working) |
| NDSR-53 | Providing Welder/Fitter for welding work along with welding machine to carry out welding as per the directions of Engineer-in-charge including cost of tools, safety equipements,consumable (electrodes) etc. | Per Day | 400.00 | 1095.05 | 438020.00 |
| NDSR-54 | Providing Plumber/Carpenter/Mason for plumbing /sewerage/Carpentry/masonary work, rectification works with all required T&P as per directions of Engineer in Charge | Per Day | 800.00 | 1002.65 | 802120.00 |
| NDSR-55 | Providing Helper/beldar for miscellaneous civil works with all required T&P as per the directions of engineer in charge. | Per Day | 1800.00 | 910.25 | 1638450.00 |
| TOTAL of Schedule-C (excluding GST) | 2878590.00 |
| Add GST @18% | 518146.20 |
| Grand Total Of Schedule - C (inclusive of all taxes) | 3396736.20 |
| Total of (Schedule-A) + (Schedule-B) + (Schedule-C) (exclusive of GST @18%)= (Rs.) | 34532519.85 |
| Total of (Schedule-A) + (Schedule-B) + (Schedule-C) (inclusive of all taxes)= (Rs.) | 40748373.42 |
