Items - Building Work/ Building Maintenance Work/ Building Renovation Work
| Tender Inviting Authority: | |
| Name of Work: | Construction of Public Toilet Facility Near Wester Sector at Anushaktinagar and Anuban at Old Mandala, Renovation of Toilets at Diepensary No-8,9 at Anushaktinagar and Anand Bhavan at Bhulabhai Desai Raod,Mumbai. |
| NIT No: | DCSEM/CQD/QSB/25-26/NIT/46 dt.12.08.2025 |
| 1) The work is to be carried out in Dispensory, hence the work shall be carried out with least disturbance to the Sarounding Working Staff. | |
| 2) All safety & security regulations shall be followed strictly as per specifications & conditions of contract. | |
| 3) The contractor shall provide sleeveless Jackets to the workers in required pattern, colour showing name of contractor with address and telephone number as approved by the Engineer in charge. All the workers must wear the same while on duty. | |
| 4) Contractor shall take contractor's all risk insurance policy in respect of entire scope of work for entire period of contract and submit copy of the same before commencement of the work. "If there is a gap in CAR insurance policy period a penalty of 1.5 times of the premium amount of original policy value shall be recovered, proportionately for the gap period" | |
| 5) Security measures to be followed by the contractor : | |
| i) Contractor should provide uniform to all regular labour and fluorescent visible wears to all casual labour deputed at site for proper identification. | |
| ii) The contractor should issue I-Card to all workers deployed on regular basis and list of such workers vetted by site Engineer should be submitted to DCSEM Security at Main Gate. | |
| iii) The supervisor of contractor having photo pass shall bring daily wages workers/ casual workers inside premises for work subject to following conditions. (i) He should prepare list of such workers in duplicate. The original copy would be handed over to DCSEM security at Main Gate and obtain endorsement on duplicate copy and the duplicate copy would remain with the contractor. (ii) Departmental staff deputed to supervise the work has to verify the reporting of such workers at site. | |
| iv) You shall follow all safety rules & security procedure that are in vogue and applicable during execution of work. You are requested to verify the character and antecedents of the labourers employed by you, through local address proof issued by competent authorities such as ration card, driving license, electricity bills, telephone bill, gas connection document etc. The nationality of contract labourers also needs due verification. | |
| v) You are requested to obtain immediately Police Verification Reports of your regular staff deployed at site(s) in respect of maintenance contract works and submit the same along with necessary application to allow them to enter in premises to carry out the assigned work. | |
| 8. i) No debris shall be left over around the building during the renovation works. An area for 'Debris bins' will be identified close to his site office or inside Anushaktinagar colony at the location identified by EIC on the request of contractor for collection of debris generated on day to day basis. The Debris from debris bin shall be cleared every month. The contractor must maintain adequate number of wheel borrows all the time for shifting the debris to Debris bin. If the debris lies around the building for more than 2 days, penalty @ Rs. 500/- per day per flat shall be levied w.e.f. 3rd day onwards. | |
| ii) The debris generated shall be disposed by mechanical transport to the nearest dumping pit inside Anushaktinagar colony as directed by EIC with all leads, loading, unloading etc. complete. No payment shall be released unless certificate from EIC showing clearance of debris is produced in each RA bill and Final bill. | |
| 6) Penal recovery shall be made at the rate of Rs. 1500/- per per day, if water taps / bib cocks, flushes etc. are left open. In case of any further material loss due to this negligence in other, same will have to be borne by contractor. | |
| 10) Wherever material are replaced with new one, quoted rate includes removing existing one and depositing the serviceable material at departmental store and disposing off debris inside Anushaktinagar colony at the location identified by EIC | |
| 11) The cement sand mortar use shall be using factory manufactured pre mix/ready mix of 'Roofit Mix 'of M/ s Premier Floor to Roof Materials pvt.ltd/ 'Easy plast' of M/sWalplast Products pvt.ltd/ 'Readiplast' of M/s UltratechCement Ltd or other approved equivalent make, having minimum composition of C:S :: 1:4 using fully treated dry, well graded natural sand conforming to IS 383 suitable for external plastering, having low rebound properties, low water demand for curing properties,mechnical mixing with water in a metallic tray only to make good consistency as per the specification of the Manufacturer. | |
| 12)The agency has to abide by the "Construction & Demolition work management plan " as approved by MCGM & any other regulations issued by the statutory authorities in the matter from time to time & agency has to deposit Bank Guarantee/deposit as required. |
| Item Rate BoQ | ||||||||||||||||||||||||||||||||||||||||||||||||||||||
| BoQ_Ver4.0 | Item Rate | Normal | INR Only | INR | ||||||||||||||||||||||||||||||||||||||||||||||||||
| Select, Excess (+), Less (-) | Less (-) | |||||||||||||||||||||||||||||||||||||||||||||||||||||
| Tender Inviting Authority: | ||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Name of Work: Construction of Public Toilet Facility Near Wester Sector at Anushaktinagar and Anuban at Old Mandala, Renovation of Toilets at Diepensary No-8,9 at Anushaktinagar and Anand Bhavan at Bhulabhai Desai Raod,Mumbai. | ||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Contract No: DCSEM/CQD/QSB/25-26/NIT/46 dt.12.08.2025 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Name of the Bidder/ Bidding Firm / Company : | ||||||||||||||||||||||||||||||||||||||||||||||||||||||
| PRICE SCHEDULE (This BOQ template must not be modified/replaced by the bidder and the same should be uploaded after filling the relevent columns, else the bidder is liable to be rejected for this tender. Bidders are allowed to enter the Bidder Name and Values only) | ||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Sl. No. | Item Description | Item Code / Make | Quantity | Units | Estimated Rate | Addition / Deduction | Addition / Deduction Values | Currency Convertion against each Item | Quoted Currency in INR / Other Currency | BASIC RATE In Figures To be entered by the Bidder Rs. P | Excise Duty | VAT | Freight Charges ( Unloading & Stacking) | Any Other Taxes/Duties/Levies | Other Taxes 2 | IIIrd Party i.e DGS&D / RITES etc Inspection Charges @0.34%+Service Tax | Less for Cenvat Credit,if any respect of Supplies Under full Excise Duty Category | TOTAL AMOUNT Without Taxes | TOTAL AMOUNT With Taxes | TOTAL AMOUNT In Words | ||||||||||||||||||||||||||||||||||
| 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 10 | 11 | 12 | 13 | 14 | 15 | 16 | 17 | 18 | 19 | 20 | 21 | 22 | 23 | 24 | 25 | 26 | 27 | 28 | 29 | 30 | 31 | 32 | 33 | 34 | 35 | 36 | 37 | 38 | 39 | 40 | 41 | 42 | 43 | 44 | 45 | 46 | 47 | 48 | 49 | 50 | 51 | 52 | 53 | 54 | 55 |
| 1 | PART I : CIVIL WORKS | 1.00 | No | Excess(+) | 1 | Full Conversion | INR | 0.00 | 0.00 | 0.00 | INR Zero Only | 1.01 | Supplying, Conveying and fixing spls. Including eart | item1 | 123.223 | Nos | ||||||||||||||||||||||||||||||||||||||
| 2 | PART- B : PH WORKS | 1.00 | No | Excess(+) | 1 | Full Conversion | INR | 0.00 | 0.00 | 0.00 | INR Zero Only | 1.01 | Supplying, Conveying and fixing spls. Including eart | item1 | 123.223 | Nos | ||||||||||||||||||||||||||||||||||||||
| 3 | PART- C : ELECTRICAL WORKS | 1.00 | No | Excess(+) | 1 | Full Conversion | INR | 0.00 | 0.00 | 0.00 | INR Zero Only | 1.01 | Supplying, Conveying and fixing spls. Including eart | item1 | 123.223 | Nos | ||||||||||||||||||||||||||||||||||||||
| Total in Figures | 0.00 | 0.00 | INR Zero Only | 4 | Construction of chamber for 100mm sluice plates | item5 | 10 | Nos | ||||||||||||||||||||||||||||||||||||||||||||||
| Quoted Rate in Figures | Select | 0.0000 | 0.0000 | Zero Only | ||||||||||||||||||||||||||||||||||||||||||||||||||
| Quoted Rate in Words | INR Zero Only |
| Item Rate BoQ | 1 | |||||||||||||||||||||||||||||||||||||||||||||||||||||
| BoQ_Ver4.0 | Item Rate | Normal | INR Only | INR | ||||||||||||||||||||||||||||||||||||||||||||||||||
| Select, Excess (+), Less (-) | Less (-) | |||||||||||||||||||||||||||||||||||||||||||||||||||||
| Tender Inviting Authority: | ||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Name of Work: Construction of Public Toilet Facility Near Wester Sector at Anushaktinagar and Anuban at Old Mandala, Renovation of Toilets at Diepensary No-8,9 at Anushaktinagar and Anand Bhavan at Bhulabhai Desai Raod,Mumbai. | ||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Contract No: DCSEM/CQD/QSB/25-26/NIT/46 dt.12.08 .2025 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Name of the Bidder/ Bidding Firm / Company : | ||||||||||||||||||||||||||||||||||||||||||||||||||||||
| PRICE SCHEDULE (This BOQ template must not be modified/replaced by the bidder and the same should be uploaded after filling the relevant columns, else the bidder is liable to be rejected for this tender. Bidders are allowed to enter the Bidder Name and Values only) | ||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Sl. No. | Item Description | Item Code / Make | Quantity | Units | Estimated Rate | Addition / Deduction | Addition / Deduction Values | Currency Convertion against each Item | Quoted Currency in INR / Other Currency | BASIC RATE In Figures To be entered by the Bidder Rs. P | Excise Duty | VAT | Freight Charges ( Unloading & Stacking) | Any Other Taxes/Duties/Levies | Other Taxes 2 | IIIrd Party i.e DGS&D / RITES etc Inspection Charges @0.34%+Service Tax | Less for Cenvat Credit,if any respect of Supplies Under full Excise Duty Category | TOTAL AMOUNT Without Taxes | TOTAL AMOUNT With Taxes | TOTAL AMOUNT In Words | ||||||||||||||||||||||||||||||||||
| 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 10 | 11 | 12 | 13 | 14 | 15 | 16 | 17 | 18 | 19 | 20 | 21 | 22 | 23 | 24 | 25 | 26 | 27 | 28 | 29 | 30 | 31 | 32 | 33 | 34 | 35 | 36 | 37 | 38 | 39 | 40 | 41 | 42 | 43 | 44 | 45 | 46 | 47 | 48 | 49 | 50 | 51 | 52 | 53 | 54 | 55 |
| 1 | PART I : CIVIL WORKS | 1.01 | Supplying, Conveying and fixing spls. Including eart | item1 | 123.223 | Nos | ||||||||||||||||||||||||||||||||||||||||||||||||
| 101 | Excavation in foundation/ trenches/ pits/ drains etc. in all soils other than soft & hard rock upto a depth not exceeding 1.50 M. including shoring and dewatering if necessary and refilling with selected excavated earth in layers not exceeding 250 mm consolidating & disposing surplus earth within the colony at identified places, complete all as per specification and as directed by the E-I-C. | 200.00 | Cum | Excess(+) | 1 | Full Conversion | INR | 0.00 | 0.00 | INR Zero Only | 1.02 | Construction of chamber for 100mm sluice plates | item2 | 213 | Nos | |||||||||||||||||||||||||||||||||||||||
| 102 | Earth work excavation in foundation pits, plinth/ tie beams, trenches etc. in soft rock upto depths mentioned below including shoring if necessary, dressing the sides, trimming, ramming and preparing the bed for foundation and refilling around the foundation and in plinth with selected excavated earth, in layers not exceeding 150mm thick, watering, consolidation to obtain 90% proctor density and etc. and stacking/ disposing the surplus excavated materials within a lead of 200 m. and all inherent lifts etc. to the required location etc. complete all as per specification, drawing and as directed by the Engineer -In-Charge. | 2 | Construction of chamber for 100mm sluices valve | item3 | 10 | Nos | ||||||||||||||||||||||||||||||||||||||||||||||||
| 102.01 | From 0.00 to 1.50 m depth from Average Ground level. | 5.00 | Cum | Excess(+) | 1 | Full Conversion | INR | 0.00 | 0.00 | INR Zero Only | 2 | Construction of chamber for 100mm sluices valve | item3 | 10 | Nos | |||||||||||||||||||||||||||||||||||||||
| 103 | Earth work excavation in foundation in Hard Rock by chiselling or by mechanical means(Hydraulic excavator)/ Manual means including dewatering if necessary, dressing the sides, ramming the bottom, and filling the sides of foundation with selected excavated earth in layers not excessing 500 mm in depth each layer and stacking/ disposing the surplus excavated materials within a lead of 200 m. and all inherent lifts etc. complete all as per specification, drawing and as directed by the Engineer -In-Charge. | 1.02 | Construction of chamber for 100mm sluice plates | item2 | 213 | Nos | ||||||||||||||||||||||||||||||||||||||||||||||||
| 103.01 | From 0.00 to 1.50 m depth from Average Ground level. | 5.00 | Cum | Excess(+) | 1 | Full Conversion | INR | 0.00 | 0.00 | INR Zero Only | 1.02 | Construction of chamber for 100mm sluice plates | item2 | 213 | Nos | |||||||||||||||||||||||||||||||||||||||
| 104 | Providing & laying rubble stone soling using spotless stones of consolidated thickness as specified below with stones vertically handset interstices packed with smaller stone chips, binding with murrum/crushed sand, watering, consolidating & finishing to required levels etc. complete all as directed by the Engineer-in-Charge. Rubble stone supplied by the contractor | 1.02 | Construction of chamber for 100mm sluice plates | item2 | 213 | Nos | ||||||||||||||||||||||||||||||||||||||||||||||||
| 104.01 | a) 150 mm thick (Rubble stone supplied by the contractor) | 120.00 | Sqm | Excess(+) | 1 | Full Conversion | INR | 0.00 | 0.00 | INR Zero Only | 2 | Construction of chamber for 100mm sluices valve | item3 | 10 | Nos | |||||||||||||||||||||||||||||||||||||||
| 104.02 | b) 230 mm thick (Rubble stone supplied by the contractor) | 420.00 | Sqm | Excess(+) | 1 | Full Conversion | INR | 0.00 | 0.00 | INR Zero Only | 2 | Construction of chamber for 100mm sluices valve | item3 | 10 | Nos | |||||||||||||||||||||||||||||||||||||||
| 105 | Plain cement concrete using graded stone aggregate of 20mm max. size including consolidation, finishing, curing, cost of form work, shuttering, centering etc. at all level and locations complete all as per specification & as directed by the Engineer-In-Charge. | 1.02 | Construction of chamber for 100mm sluice plates | item2 | 213 | Nos | ||||||||||||||||||||||||||||||||||||||||||||||||
| 105.01 | a) 1:3:6 | 5.00 | Cum | Excess(+) | 1 | Full Conversion | INR | 0.00 | 0.00 | INR Zero Only | 1.02 | Construction of chamber for 100mm sluice plates | item2 | 213 | Nos | |||||||||||||||||||||||||||||||||||||||
| 105.02 | b) 1:2:4 | 10.00 | Cum | Excess(+) | 1 | Full Conversion | INR | 0.00 | 0.00 | INR Zero Only | 1.02 | Construction of chamber for 100mm sluice plates | item2 | 213 | Nos | |||||||||||||||||||||||||||||||||||||||
| 106 | Providing and laying Design Mix Reinforced cement concrete by Weigh batching of following grades using graded stone aggregate of 20 mm max. size including mechanical mixing and vibration, consolidation, finishing, curing etc. complete at all floors and heights/levels as per specified and also including dewatering if any, but excluding cost of formwork, shuttering & steel reinforcement as per direction of Engineer-in-charge. | 1.02 | Construction of chamber for 100mm sluice plates | item2 | 213 | Nos | ||||||||||||||||||||||||||||||||||||||||||||||||
| 106.01 | M:20 grade | 20.00 | Cum | Excess(+) | 1 | Full Conversion | INR | 0.00 | 0.00 | INR Zero Only | 2 | Construction of chamber for 100mm sluices valve | item3 | 10 | Nos | |||||||||||||||||||||||||||||||||||||||
| 106.02 | M-30 grade | 43.00 | Cum | Excess(+) | 1 | Full Conversion | INR | 0.00 | 0.00 | INR Zero Only | 2 | Construction of chamber for 100mm sluices valve | item3 | 10 | Nos | |||||||||||||||||||||||||||||||||||||||
| 107 | Extra for providing RMC (Ready Mixed Concrete) confirming to IS : 4926(latest) in lieu of conventional RCC and PCC items supplied by approved RMC manufactures for all type of structural elements/ RCC / PCC elements including transporting, pumping etc. complete as per instruction of the Engineer in charge. Note:- i) The contractor shall obtain prior approval of RMC manufacturer from Engineer in Charge in writing. ii) This item shall be measured in addition to the original items of RCC and PCC mentioned elsewhere in Schedule of Quantities. iii) The rate shall apply for all levels and locations including all type of structure etc. complete. iv) Extra for RMC in lieu of conventional RCC and PCC of any grade mentioned elsewhere shall be measured and paid under this item for substructure). | 50.00 | Cum | Excess(+) | 1 | Full Conversion | INR | 0.00 | 0.00 | INR Zero Only | 1.02 | Construction of chamber for 100mm sluice plates | item2 | 213 | Nos | |||||||||||||||||||||||||||||||||||||||
| 108 | Reinforcement with TMT bars of Fe500D grade reinforced cement concrete conforming to IS at all floors & levels including, supplying, cutting, bending, fixing and tying in position with 1.6 mm dia soft drawn annealed binding wire including cost of binding wire, labour and welding of new reinforcement bars with existing reinforcement bars wherever required etc. complete all as per specifications and as directed by the Engineer-in-Charge. Note:- Binding wire required for the work will have to be supplied by the contractor & the same will not be measured for payment. | 7.00 | MT | Excess(+) | 1 | Full Conversion | INR | 0.00 | 0.00 | INR Zero Only | 1.02 | Construction of chamber for 100mm sluice plates | item2 | 213 | Nos | |||||||||||||||||||||||||||||||||||||||
| 109 | Clearing jungle including uprooting of rank vegetation, grass, brush wood, trees and saplings of girth up to 15 cm measured at a height of 1 m above ground level and removal of rubbish up to a distance of 50 m outside the periphery of the area cleared etc complete all as per specifications and as directed by EIC. | 110.00 | Sqm | Excess(+) | 1 | Full Conversion | INR | 0.00 | 0.00 | INR Zero Only | 2 | Construction of chamber for 100mm sluices valve | item3 | 10 | Nos | |||||||||||||||||||||||||||||||||||||||
| 110 | Providing and fixing 60 mm thick (min) factory made interlocking paver blocks (grade of cement concrete M- 30) of approved colour, shade, size, shape of glossy / matt finish including supplying & laying 50 mm thick stone dust evenly spread over the sub base including consolidation of sub base, properly vibrating with the surface vibrater, finishing to line, level and slope, finally filling the joints with fine clean sand and cleaning the surface etc complete all as per specifications and as directed by the Engineer-in-Charge. | 50.00 | Sqm | Excess(+) | 1 | Full Conversion | INR | 0.00 | 0.00 | INR Zero Only | 1.02 | Construction of chamber for 100mm sluice plates | item2 | 213 | Nos | |||||||||||||||||||||||||||||||||||||||
| 111 | Providing and fixing precast cement concrete 1:2:4 kerb stones of size 125 mm wide and 375/250 mm deep curved at inner edge of 25 mm radius including necessary form work, compaction, finishing, curing, fixing with CM 1:4 (Using factory made Ready Mix Mortar only) , jointing and pointing in cement mortar 1:4 (Using factory made Ready Mix Mortar only) including earth work and 75 mm thick & 200 mm wide PCC 1:4:8 for foundation below kerb stone etc. complete all as per specification and as directed by the Engineer-in-Charge.. | 1.02 | Construction of chamber for 100mm sluice plates | item2 | 213 | Nos | ||||||||||||||||||||||||||||||||||||||||||||||||
| 111.01 | 125mm wide 375mm deep | 50.00 | Rm | Excess(+) | 1 | Full Conversion | INR | 0.00 | 0.00 | INR Zero Only | 1.02 | Construction of chamber for 100mm sluice plates | item2 | 213 | Nos | |||||||||||||||||||||||||||||||||||||||
| 112 | Providing, centering, shuttering form work using PVC film faced plywood to get neat form finish surface for all types of structures including necessary strutting, propping, staging, supports etc and de-shuttering the same after the specified time all as per drawings, specifications and as directed by the Engineer-in-charge. | 340.00 | Sqm | Excess(+) | 1 | Full Conversion | INR | 0.00 | 0.00 | INR Zero Only | 2 | Construction of chamber for 100mm sluices valve | item3 | 10 | Nos | |||||||||||||||||||||||||||||||||||||||
| 113 | Brick work using Ready mix cement mortar 1:4 using well burnt locally available bricks of approved quality including scaffolding, raking out joints above ground level simultaneous pointing below ground level, curing, scaffolding,etc. complete all as per specifications & as directed by the Engineer-in-Charge. | 2 | Construction of chamber for 100mm sluices valve | item3 | 10 | Nos | ||||||||||||||||||||||||||||||||||||||||||||||||
| 113.01 | a) In foundation & plinth, drain walls, chambers etc. | 18.00 | Cum | Excess(+) | 1 | Full Conversion | INR | 0.00 | 0.00 | INR Zero Only | 1.02 | Construction of chamber for 100mm sluice plates | item2 | 213 | Nos | |||||||||||||||||||||||||||||||||||||||
| 113.02 | b) In super structure at all floors and levels. | 31.00 | Cum | Excess(+) | 1 | Full Conversion | INR | 0.00 | 0.00 | INR Zero Only | 1.02 | Construction of chamber for 100mm sluice plates | item2 | 213 | Nos | |||||||||||||||||||||||||||||||||||||||
| 114 | Half brick masonry using well burnt locally available bricks of approved quality using ready mix cement mortar 1:4 at all floors and levels including RCC 1:2:4,115mm wide & 80mm thick stiffeners at every one metre height with 2Nos. of 8 mm dia TMT bars including form work, scaffolding, raking out joints, curing etc. complete all as per specifications & as directed by the Engineer-in-Charge. | 1.02 | Construction of chamber for 100mm sluice plates | item2 | 213 | Nos | ||||||||||||||||||||||||||||||||||||||||||||||||
| 114.01 | a) In partition walls with stiffeners. | 106.00 | Sqm | Excess(+) | 1 | Full Conversion | INR | 0.00 | 0.00 | INR Zero Only | 1.02 | Construction of chamber for 100mm sluice plates | item2 | 213 | Nos | |||||||||||||||||||||||||||||||||||||||
| 115 | Cement plastering using factory manufactured pre mix/ready mix mortar of approved make minimum composition of C:S is 1:4 suitable for internal plastering to wall and ceiling finished smooth over brick walls or concrete surfaces including acrylic based membrane curing of M/s Anuvi chemicals/Fosroc/Dr.fixit at all floors and levels, including scaffolding, removing existing damaged/ worn out plastering and disposing off debris with in colony etc., complete all as per specifications and as directed by EIC. | 2 | Construction of chamber for 100mm sluices valve | item3 | 10 | Nos | ||||||||||||||||||||||||||||||||||||||||||||||||
| 115.01 | i) 12 mm thick | 15.00 | Sqm | Excess(+) | 1 | Full Conversion | INR | 0.00 | 0.00 | INR Zero Only | 2 | Construction of chamber for 100mm sluices valve | item3 | 10 | Nos | |||||||||||||||||||||||||||||||||||||||
| 115.02 | ii) 15mm thick. | 470.00 | Sqm | Excess(+) | 1 | Full Conversion | INR | 0.00 | 0.00 | INR Zero Only | 1.02 | Construction of chamber for 100mm sluice plates | item2 | 213 | Nos | |||||||||||||||||||||||||||||||||||||||
| 116 | Providing & laying at all floors & levels first quality ceramic tiles of minimum thickness as specified by the manufacturer of M/S. H&R JHONSON (INDIA) Ltd. or equivalent approved make of approved colors, shade and texture in flooring / dado / skirting as per approved pattern. including cost of all materials, including of cutting the tiles to required shape, wastage, pointing the joints with white cement mixed with matching pigments to match the colour of the tiles, finished to line, level, slope & plumb, final cleaning of surface as required, curing , making necessary opening cutouts etc. and including removing existing flooring / dado and disposing of debris complete all as per specifications, relevant IS code & as directed by the Engineer-in-Charge. | 1.02 | Construction of chamber for 100mm sluice plates | item2 | 213 | Nos | ||||||||||||||||||||||||||||||||||||||||||||||||
| 116.01 | a) In flooring with tiles of size 300 x 300 Anti skid tiles of approved make ( approx size ) similar to white / ivory / other approved colour quartze series of M/s H& R Johnson or equivalent approved make with 20 mm thick 1:4 ready mix Cement mortar bedding. etc. complete. All as per specifications and as directed by the Engineer-in-Charge | 100.00 | Sqm | Excess(+) | 1 | Full Conversion | INR | 0.00 | 0.00 | INR Zero Only | 1.02 | Construction of chamber for 100mm sluice plates | item2 | 213 | Nos | |||||||||||||||||||||||||||||||||||||||
| 116.02 | b)In dado / Skirting with tiles of 300X600mm ( digital collection of Approved Make) upto 2500 mm ( approx height/ a full ceiling height ) fixed over 12 mm thick using 1:4 ready mix cement mortar backing/fixed directly over existing tile with polymer cum cement based adhesive (Type-II) manufactured by roffe construction or M/S Bal Endura chemicals or other approved equivalent, jointed with cement slurry & grouted with pigment of matching shade & finishing the top of skirting/dado etc. complete. All as per specifications and as directed by the Engineer-in-Charge | 470.00 | Sqm | Excess(+) | 1 | Full Conversion | INR | 0.00 | 0.00 | INR Zero Only | 1.02 | Construction of chamber for 100mm sluice plates | item2 | 213 | Nos | |||||||||||||||||||||||||||||||||||||||
| 117 | Providing and fixing / replacement of existing in position at all floors, levels/ heights 18mm thick mirror polished natural stones slab for door frame in two overlapping layers one piece full length/ height of approved shade, finished sizes as directed including machine cut/ hand cut, final cleaning, moulding and polishing of exposed edges, in line, level, plumb and fixing the stone with ready mix cement mortar 1:3, 20mm backing & overlapping of 20mm shall be fixed with Araldite adhesive, with best workmanship, finishing, curing, providing 75mm long SS screw minimum @600mm c/c including removing existing door frame, shutter & fittings etc. and depositing the same at dept. store etc. complete all as per specifications, drawings & as directed by the Engineer- in- Charge. Note : 1)Verticals,shelves,platform shall be embedded minimum 25 mm in wall/flooring. 2) Window jamb, cill & lintel bottom with granite / green marble shall be mitred / partly mitred joint as directed by Engineer-In-Charge. 3)Exposed inside vertical finished face of window below platform shall be measured for payment in sqm. 4) All finished natural stones except for floorings shall be applied with araldite or equivalent stone adhesive on back surface, spreading/splashing of sand particles on adhesive applied surface before a day of fixing of stones. 4)Agencies shall quote rate accordingly. | 2 | Construction of chamber for 100mm sluices valve | item3 | 10 | Nos | ||||||||||||||||||||||||||||||||||||||||||||||||
| 117.01 | 18 mm thick machine cut and single side machine polished Baroda green marble stone for window jamb & bottom of lintel in single piece laid over 20 mm thick 1:4 cement mortar (Using factory made Ready Mix Mortar only) including half round moulding & polishing of exposed face etc complete. | 8.00 | Sqm | Excess(+) | 1 | Full Conversion | INR | 0.00 | 0.00 | INR Zero Only | 1.02 | Construction of chamber for 100mm sluice plates | item2 | 213 | Nos | |||||||||||||||||||||||||||||||||||||||
| 117.02 | 18 mm thick machine cut and single side machine polished jet black granite stone stone for window cill in stepped form laid over 20 mm thick 1:4 cement mortar (Using factory made Ready Mix Mortar only) & overlapping of 20 mm shall be fixed with Araldite adhesive with best workmanship, including half round moulding & polishing of exposed face etc complete. | 34.00 | Sqm | Excess(+) | 1 | Full Conversion | INR | 0.00 | 0.00 | INR Zero Only | 1.02 | Construction of chamber for 100mm sluice plates | item2 | 213 | Nos | |||||||||||||||||||||||||||||||||||||||
| 117.03 | 18 mm thick granite stone of approved shade, colour with leather /lapato finish for flooring / staircase tread with stone slabs including edging, full half round moulding, machine polishing to edge to give high gloss finish, making 3 rows of 5 mm X 5mm grooves by machine and including 20 mm thick 1:4 (Using factory made Ready Mix Mortar only) cement mortar bedding. | 10.00 | Sqm | Excess(+) | 1 | Full Conversion | INR | 0.00 | 0.00 | INR Zero Only | 1.02 | Construction of chamber for 100mm sluice plates | item2 | 213 | Nos | |||||||||||||||||||||||||||||||||||||||
| 117.04 | 18 mm thick granite stone of approved colour and shade and surface finish for counter/dado/ skirting/cladding/staircase riser with stone slabs of various size in pattern including 12 mm thick 1:3 (Using factory made Ready Mix Mortar only) cement mortar bedding for fixing etc., complete as directed by Engineer in Charge. | 4.00 | Sqm | Excess(+) | 1 | Full Conversion | INR | 0.00 | 0.00 | INR Zero Only | 1.02 | Construction of chamber for 100mm sluice plates | item2 | 213 | Nos | |||||||||||||||||||||||||||||||||||||||
| 118 | Repainting of old painted surfaces with two coats of Oil bound distemper of approved make & shade over two coats of approved primer consist of thoroughly scrapping oil bound distemper / white wash surface, applying a coat of approved cement primer, filling up the cracks with approved crack filling compound, applying approved stucco putty to entire surface to fill up crevices, mild depression etc. thoroughly scrapping the surface, applying 2nd coat of approved cement primer over putty work , apply two coats of Oil bound distemper paint including necessary covering material and removal of splashing & droppings from floors, walls including scaffolding, ladder as required & disposing of debris within colony etc. complete all as directed by the Engi`neer-in-Charge. | 460.00 | Sqm | Excess(+) | 1 | Full Conversion | INR | 0.00 | 0.00 | INR Zero Only | 2 | Construction of chamber for 100mm sluices valve | item3 | 10 | Nos | |||||||||||||||||||||||||||||||||||||||
| 119 | Painting old wood/steel work with two coats of Synthetic enamel paint of approved shade & make over one coat of primer including preparing surfaces, through scrapping of MS work, filling with putty wherever required, scaffolding & cleaning etc. complete all as per specifications & as directed by the Engineer-in-Charge | 1.02 | Construction of chamber for 100mm sluice plates | item2 | 213 | Nos | ||||||||||||||||||||||||||||||||||||||||||||||||
| 119.01 | a) On wooden surfaces with two finishing coat over a coat of wood primer. | 20.00 | Sqm | Excess(+) | 1 | Full Conversion | INR | 0.00 | 0.00 | INR Zero Only | 1.02 | Construction of chamber for 100mm sluice plates | item2 | 213 | Nos | |||||||||||||||||||||||||||||||||||||||
| 119.02 | b) On steel surfaces with two finishing coats over a coat of steel primer. | 20.00 | Sqm | Excess(+) | 1 | Full Conversion | INR | 0.00 | 0.00 | INR Zero Only | 1.02 | Construction of chamber for 100mm sluice plates | item2 | 213 | Nos | |||||||||||||||||||||||||||||||||||||||
| 120 | Providing and applying one coat of base primer (Apex Ultima protect of M/s. Asian paints or Aquatech of M/s. ICI Dulux or equivalent) and two top coats of acrylic water proof exterior coating of Weathershield flexx rainproof system of M/s. ICI Dulux or other approved equivalent make and shade over the sand face / form finished surfaces / rough cast plaster at all locations as required, thoroughly mixed and applied at an interval of 6-8 hours for each successive coats and ensure consumption of 0.47 ltr/Sqm for 3 coats,(base coat @.29 Ltr/sqm & two top coats @0.18 Ltr/sqm ) for sand face surfaces including preparation of surface, cleaning and filling the cracks and crevices with Latex caulking crack filler etc. Complete generally as per the manufacturer's specification and as directed by the EIC. | 1.02 | Construction of chamber for 100mm sluice plates | item2 | 213 | Nos | ||||||||||||||||||||||||||||||||||||||||||||||||
| 120.01 | a) Over sand faced plastered / Form finished surfaces | 150.00 | Sqm | Excess(+) | 1 | Full Conversion | INR | 0.00 | 0.00 | INR Zero Only | 2 | Construction of chamber for 100mm sluices valve | item3 | 10 | Nos | |||||||||||||||||||||||||||||||||||||||
| 121 | Sand faced cement plaster 20 mm thick in CM 1:4, two coats using factory manufactured pre mix/ready mix of 'Roofit Mix'of M/s Premier Floor to Roof Materials pvt.ltd/ 'Easy plast' of M/s Walplast Products pvt.ltd/ 'Readiplast' of M/s Ultratech Cement Ltd or other approved equivalent make, having minimum composition of C:S :: 1:4 using fully treated dry, well graded natural sand conforming to IS 383 suitable for external plastering, having low rebound properties, low water demand for curing properties, mechnical mixing with water in a metalic tray only to make good consistency as per the specification of the Manufacturer and applied over exterior masonry and concrete surfaces with base coat of 12 mm thick and finishing coat of 8 mm thick final rendering, including using richer mix for making corners if necessary, at all floors and level, including making grooves of existing size wherever required, including cleaning the surfaces, including membrane curing by applying one coat of factory made curing compound Resikure of M/s Anuvi Chemicals, Concure of M/s fosroc, Dr. Fixit curing compound or other equivalent over repaired surfaces as per manufacturer's specification etc. including removing existing damaged/ worn out plastering and disposing off debris inside colony etc. complete all as per specifications & as directed by the Engineer-in-charge. NOTE:1.The contractor must take full precautions that original brick work is not damaged while dismantling of plaster. Incase of any damage the same shall be made good with 22g chickenwire mesh at his own cost . No separate payment for any additional thickness of plaster if any will be made. Contractor must visit site and acquiant himself with the condition of building. | 200.00 | Sqm | Excess(+) | 1 | Full Conversion | INR | 0.00 | 0.00 | INR Zero Only | 2 | Construction of chamber for 100mm sluices valve | item3 | 10 | Nos | |||||||||||||||||||||||||||||||||||||||
| 122 | Supplying, fabricating and fixing in position at all floors Aluminium sliding/top hung/fixed/ adjustable louvered windows & ventilators with rivit joint of specified size, made of integrated bronze anodised matt finished (15micron thick) aluminium section (extruded) , including for making exhaust fan frame work, handles of specified size etc, of approved manufactures for following types with extruded sections of Jindal / Hindal / Aluminax or other approved equivalent make of approved sections with size and wights as directed for frames and shutters (including wastages if any) confirming to relevant IS specifications with all approved Bronze anodised aluminium fittings and accessories, latching fixture, 2/3 rollers with ball bearing of superior quality all as shown in the drawing including providing and fixing aluminium channel beading/glazing clips fixed with necessary bronze anodised screws, grouting the gap with sealant and including dismantling of existing window frame and shutter, glass and depositing same to dept store etc all complete generally as per drawing, specifications etc, all as directed by EIC. | 260.00 | Kg | Excess(+) | 1 | Full Conversion | INR | 0.00 | 0.00 | INR Zero Only | 1.02 | Construction of chamber for 100mm sluice plates | item2 | 213 | Nos | |||||||||||||||||||||||||||||||||||||||
| 123 | Providing & fixing ordinary plain / frosted / Bajara sheet glass/ for MS openable/louvers or aluminium sliding windows , glass doors, vision panels etc of approved make of following thickness in various sizes as required at site, using first class glass oil putty of approved quality and make including supplying & fixing glazing pins, teak wood or aluminium beading, EPDM gasket etc with necessary screws, nails etc (as required). at all floors & locations including cutting the glass to required size, removing the existing broken / damaged glass panes from windows / doors / partitions etc. along with its old oil putty/gasket /beading etc. carefully and disposing off the un-serviceable material with in colony including wastage in cutting, transportation etc. complete all as directed by the Engineer-in-Charge. | 1.02 | Construction of chamber for 100mm sluice plates | item2 | 213 | Nos | ||||||||||||||||||||||||||||||||||||||||||||||||
| 123.01 | a) 3 mm thick Bajra glass for windows /louvers | 10.00 | Sqm | Excess(+) | 1 | Full Conversion | INR | 0.00 | 0.00 | INR Zero Only | 1.02 | Construction of chamber for 100mm sluice plates | item2 | 213 | Nos | |||||||||||||||||||||||||||||||||||||||
| 123.02 | b) 5 mm thick Bajra glass for windows /louvers | 7.00 | Sqm | Excess(+) | 1 | Full Conversion | INR | 0.00 | 0.00 | INR Zero Only | 2 | Construction of chamber for 100mm sluices valve | item3 | 10 | Nos | |||||||||||||||||||||||||||||||||||||||
| 123.03 | c) 5 mm thick plain glass with EPDM gasket for aluminium windows | 7.00 | Sqm | Excess(+) | 1 | Full Conversion | INR | 0.00 | 0.00 | INR Zero Only | 2 | Construction of chamber for 100mm sluices valve | item3 | 10 | Nos | |||||||||||||||||||||||||||||||||||||||
| 124 | Supplying & fixing 25 mm thick PVC integral free foam sheet in form of flush finish door shutter, manufactured by M/s. Jain Irrigation Systems Ltd. (Ex-cel sheet) or other equivalent approved make of white colour, solid section, extruded rigid, light weight sheet with fine & homogeneous closed cell structure with smooth, glossy, hard surface finish on both sides including providing recessions for hinges and providing & fixing 3 nos 100 mm heavy duty S.S. hinges and 2 Nos. 100 mm heavy duty aluminium baby latches, 2 nos. of 100 mm Al. Bow handles with back plate and including providing a vision panel opening of size 300 mm X 200 mm including providing and fixing PVC moulded louvers on both faces in the opening of vision panel with ss screws, all edges to be smooth finish with mixture of PVC powder & solvent etc complete all as per specification and as directed by the EIC. Note:- 1) The entire door shall be jointless shutter. 2) The sizes shall be approximately 650 mm x 2000mm, however exact dimensions shall be measured at site before manufacturing. | 35.00 | Sqm | Excess(+) | 1 | Full Conversion | INR | 0.00 | 0.00 | INR Zero Only | 1.02 | Construction of chamber for 100mm sluice plates | item2 | 213 | Nos | |||||||||||||||||||||||||||||||||||||||
| 125 | Providing and fixing second class teak wood in frames of required sections for doors, windows, ventilators, clear storey window, partition, railing, battens & rafters etc. wrought framed and fixed in position including providing and fixing M.S. hold fasts of size 200 x 30 x 3 mm embedded in concrete block of P.C.C. 1:2:4 and fixing frame in position, labour for removal of door shutter carefully and refixing the same including applying one coat of approved wood primer & two coats of synthetic enamel paint to the exposed surfaces and two coats of bituminous paint to the surfaces of frames in contact with masonry concrete etc. including removing the old damaged frames and transporting to Deptt. Stores and making the adjacent plaster good to match with existing surfaces, etc. complete all as directed by the Engineer-in-Charge. | 0.80 | Cum | Excess(+) | 1 | Full Conversion | INR | 0.00 | 0.00 | INR Zero Only | 1.02 | Construction of chamber for 100mm sluice plates | item2 | 213 | Nos | |||||||||||||||||||||||||||||||||||||||
| 126 | Supplying & fixing in position the 30/40 mm thick solid core block board flush door shutters with commercial ply on both side conforming to IS with external type teak wood lipping of section 30 x 20 mm/40 x 20 mm alround, fixing shutters in position to pressed steel door frames/wooden frames at all floors by cutting / planning if necessary, including supplying & fixing heavy duty MS oxidised hinges including cost of fixing the fittings, painting the shutters all over with two coats of synthetic enamel paint of approved make & colour over one coat of approved primer etc. including removing the old damaged shutter and transporting to Deptt. stores all as per specifications, & as directed by Engineer-in-charge | 2 | Construction of chamber for 100mm sluices valve | item3 | 10 | Nos | ||||||||||||||||||||||||||||||||||||||||||||||||
| 126.01 | a) For Door 35 mm thick | 18.20 | Sqm | Excess(+) | 1 | Full Conversion | INR | 0.00 | 0.00 | INR Zero Only | 2 | Construction of chamber for 100mm sluices valve | item3 | 10 | Nos | |||||||||||||||||||||||||||||||||||||||
| 127 | Providing & fixing Hydraulic door closure conforming to IS:3564 of heavy duty (as per approved make & design) with fittings and fixtures, necessary screws/bolts and other accessories including removing the existing old & damaged door closure and submitting the same to the deptt. store. | 1.02 | Construction of chamber for 100mm sluice plates | item2 | 213 | Nos | ||||||||||||||||||||||||||||||||||||||||||||||||
| 127.01 | a) Hydraulic door closure of Everite or equivalent approved (Right/ Left type) | 13.00 | Nos | Excess(+) | 1 | Full Conversion | INR | 0.00 | 0.00 | INR Zero Only | 1.02 | Construction of chamber for 100mm sluice plates | item2 | 213 | Nos | |||||||||||||||||||||||||||||||||||||||
| 128 | Superior Quality S.S Door stopper Floor type with solid double barrel bolt, heavy quality rubber bush fixed with screw/without screw, complete set. The weight of S.S door stopper with rubber bush and screw shall not be less than 190 gms each. (Remark : Door stopper less than 190 gms is not acceptable) | 13.00 | Each | Excess(+) | 1 | Full Conversion | INR | 0.00 | 0.00 | INR Zero Only | 2 | Construction of chamber for 100mm sluices valve | item3 | 10 | Nos | |||||||||||||||||||||||||||||||||||||||
| 129 | Stainless steel aldrop 250mm long along with extra staples. | 14.00 | Each | Excess(+) | 1 | Full Conversion | INR | 0.00 | 0.00 | INR Zero Only | 1.02 | Construction of chamber for 100mm sluice plates | item2 | 213 | Nos | |||||||||||||||||||||||||||||||||||||||
| 130 | SS hings for door shutter100mm long and 2.5mm thick | 10.00 | Each | Excess(+) | 1 | Full Conversion | INR | 0.00 | 0.00 | INR Zero Only | 2 | Construction of chamber for 100mm sluices valve | item3 | 10 | Nos | |||||||||||||||||||||||||||||||||||||||
| 131 | SS hings(Both side openable) for door shutter100mm long and 2.5mm thick | 10.00 | Each | Excess(+) | 1 | Full Conversion | INR | 0.00 | 0.00 | INR Zero Only | 2 | Construction of chamber for 100mm sluices valve | item3 | 10 | Nos | |||||||||||||||||||||||||||||||||||||||
| 132 | SS Tower bolt 100mm long | 10.00 | Each | Excess(+) | 1 | Full Conversion | INR | 0.00 | 0.00 | INR Zero Only | 2 | Construction of chamber for 100mm sluices valve | item3 | 10 | Nos | |||||||||||||||||||||||||||||||||||||||
| 133 | SS baby latch | 10.00 | Each | Excess(+) | 1 | Full Conversion | INR | 0.00 | 0.00 | INR Zero Only | 1.02 | Construction of chamber for 100mm sluice plates | item2 | 213 | Nos | |||||||||||||||||||||||||||||||||||||||
| 134 | SS handle 150mm long D type | 14.00 | Each | Excess(+) | 1 | Full Conversion | INR | 0.00 | 0.00 | INR Zero Only | 1.02 | Construction of chamber for 100mm sluice plates | item2 | 213 | Nos | |||||||||||||||||||||||||||||||||||||||
| 135 | Set of aluminium louvers for 600x450mm | 20.00 | Each | Excess(+) | 1 | Full Conversion | INR | 0.00 | 0.00 | INR Zero Only | 1.02 | Construction of chamber for 100mm sluice plates | item2 | 213 | Nos | |||||||||||||||||||||||||||||||||||||||
| 136 | Structural steel work at all floors, levels and locations in grills, guard bars for windows, frames, Fence, pit/ trench covers, cover bracket for slanting chajja, trap door, railing, balcony hand railing, hoisting hooks, smoke vents etc. using angles, channels, I-Section, tees, flats, bars, chequered plates, plain plates, hollow section, bright bars etc. of required sizes including supplying, cutting, fabricating, welding, erecting, making holes/ chases wherever required and fixing / embedding in position in concrete/ brickwork/blockwork/ marble/ granite stone with necessary hold fasts/ stainless steel screws & rawl plugs by drilling etc. and finishing the concrete/ brick work/ blockwork after fixing/ embedding including painting two coats of anti corrosive bitumastic paint on all unexposed surfaces and two coats of synthetic enamel paint of approved make and colour on all exposed surfaces over a coat of approved zinc chromate primer etc. complete as per specifications, drawings and as directed by the Engineer in charge. Note:- All structural steel work shall be as per latest version IS:800 & IS:806. All Rectangular and Square Hollow Sections (RHS & SHS) shall be conforming to latest version of IS:4923. All rolled sections shall be of Grade E-250 and conforming to latest verison of IS:2062. Welding shall be as per IS:816 & IS:6227. | 1.02 | Construction of chamber for 100mm sluice plates | item2 | 213 | Nos | ||||||||||||||||||||||||||||||||||||||||||||||||
| 136.01 | Using structural steel sections of specified grade (YSt 240 / 310) | 8500.00 | Kg | Excess(+) | 1 | Full Conversion | INR | 0.00 | 0.00 | INR Zero Only | 1.02 | Construction of chamber for 100mm sluice plates | item2 | 213 | Nos | |||||||||||||||||||||||||||||||||||||||
| 136.02 | 10mm Chequered plate | 4500.00 | Kg | Excess(+) | 1 | Full Conversion | INR | 0.00 | 0.00 | INR Zero Only | 2 | Construction of chamber for 100mm sluices valve | item3 | 10 | Nos | |||||||||||||||||||||||||||||||||||||||
| 137 | Providing and fixing 0.5 mm (minimum) thickness GI CRCA sheet pre coated with high durable polyetser painted, at all floors, levels & locations, manufactured by approved manufacturer, the base metal shall be CRCA steel as per IS:513, having minimum yield strength of 240 MPa and minimum UTS of 280 MPa galvanized to 120 gsm zinc coating mass (total both sides) as per IS : 277, conforming to AS:35366 class 3 of Rustshield/ Corroshield, having approved colour, shade and profile, fixing the sheet using SS self tapping screws of suitable length @ 450 mm C/C (both ways as per availability of member) with drill machine including heavy quality bituminious / EPDM / neoprene washer, over structural steel members frame work over terrace including providing & fixing necessary ridges, gabels, valleys, gutters sections and including wastage, overlapps as per manufacturer's specifications, cutting, labour, scaffolding, machines, lifting, fixing etc complete all as per specifications, drawings and as directed by EIC. The total thickness of sheet, inclusive of all chemical treatment, primer and finished coats shall not be less than 0.50 mm. Mode of measurement: Actual area of roof coverings including ridges, eaves, gutter etc. after fixing shall be measured for payment. Corrugation, overlaps shall not be measured for payment. Note: Mode of measurement: Top plan width x Length of sheet after fixing shall be measured for payment. Corrugation, overlaps shall not be measured. | 70.00 | Sqm | Excess(+) | 1 | Full Conversion | INR | 0.00 | 0.00 | INR Zero Only | 2 | Construction of chamber for 100mm sluices valve | item3 | 10 | Nos | |||||||||||||||||||||||||||||||||||||||
| 138 | Supplying, fabricating, and installing a restroom signage board of size 150 mm x 300 mm. The board shall be made from a 2 mm thick Stainless Steel sheet of Grade 304, with a satin matte finish (No. 4 finish). The edges of the board are to be machine-cut, smoothed, and beveled including lettering as per approved design/drawing, and fixing with stainless steel screws/anchor fasteners, complete as per the direction of Engineer-in-Charge. SPECIFICATION: The steel sheets conforming to M/s. Safintra sheets or other approved equivalent make in SR 25 Module, shall have pre/ treatment by Dip process, using pre-activation, zinc phosphate dip and final chrome rinse (trivalent chrome) on both surfaces, each of average DFT 5 microns, followed by a finish coat of specially formulated polyester paint in METASHIELD TM EPG TM of average DFT 20 microns, on the exposed surface and same specially formulated in METASHIELD ® approved shade to and average DFT 5 micron. The total coated thickness of metal inclusive of galvanization, chemical treatment, primer and finished coats shall not be less than 0.50mm. Note: 1)Test of materials shall be carried out for raw sheets as well as manfactured sheets, as per relevant I.S codes before acceptance and bulk supply.2) Contractor shall arrange predispatch inspection of material before bulk procurement at factory.3) All tests of material shall be done to every 3500 Sqm. Material lot shall be rejected if tests results fail.4) The sheet shall be fixed in a best workman like manner in line and level. | 18.00 | each | Excess(+) | 1 | Full Conversion | INR | 0.00 | 0.00 | INR Zero Only | 1.02 | Construction of chamber for 100mm sluice plates | item2 | 213 | Nos | |||||||||||||||||||||||||||||||||||||||
| 139 | Providing & fixingTerracota Jalli of size 200 x 200 / 250 x 175 , 75mm thick fixing with required pins and fixing with cement mortar, cement paste etc. complete all as per drawing and as directed by Engineer-in-charge. | 30.00 | Sqm | Excess(+) | 1 | Full Conversion | INR | 0.00 | 0.00 | INR Zero Only | 2 | Construction of chamber for 100mm sluices valve | item3 | 10 | Nos | |||||||||||||||||||||||||||||||||||||||
| 140 | Providing and fixing aluminium grill 10mm thick DECO GRILLE make model no DG202 (Red colour) in approved colour anodising of Min 15 micron with a opening size of 60mm X 45mm and minimum weight of 4.282 kg/Sqm including providing and fixing suitable F & H frame section outer frame and mullion fixing with screw, double tubular necessary scaffolding complete. all as per specification and as directed at site by the Engineer-in-Charge (Aluminium alloy shall be of 6063-T6 with yield strength of 6.5Kg/Sqm) | 45.00 | Sqm | Excess(+) | 1 | Full Conversion | INR | 0.00 | 0.00 | INR Zero Only | 2 | Construction of chamber for 100mm sluices valve | item3 | 10 | Nos | |||||||||||||||||||||||||||||||||||||||
| 141 | Providing & laying / damaged portion replacement with machine cut machine polished Cuddapah stones/ granite stone/ marble stone as mentioned followings for kitchen platform vertical support/ shelves/ window cill etc. and including necessary cement mortar for backing/ bedding, close jointed and grouted with matching cement slurry and finished to line, slope, level, plumb, curing etc. as required including removing and refixing of existing aluminium alsing window along with MS grill, cutting of stone slabs, wastage, making cut outs wherever required, providing 75mm long SS screw minimum @600mm c/c etc. all as per drawing, specifications and as directed by the Engineer- in- Charge. Note : 1)Verticals,shelves,platform shall be embedded minimum 25 mm in wall/flooring. 2) Window jamb, cill & lintel bottom with granite / gren marble shal be mitred / partly mitred joint as directed by Engineer-In-Charge. 3)Exposed inside vertical finished face of window below platform shall be measured for payment in sqm. 4) All finished natural stones except for floorings shall be applied with araldite or equivalent stone adhesive on back surface, spreading/splashing of sand particles on adhesive applied surface before a day of fixing of stones. 4)Agencies shall quote rate accordingly. | 1.02 | Construction of chamber for 100mm sluice plates | item2 | 213 | Nos | ||||||||||||||||||||||||||||||||||||||||||||||||
| 141.01 | a) 18 mm thick machine cut and single side machine polished Baroda green marble stone for window cill in stepped form laid over 20 mm thick 1:4 ready mix cement mortar & over lapping of 20 mm shall be fixed with Araldite adhesive with best workmanship including half round moulding & polishing of exposed face etc. complete. all as per drawing, specifications and as directed by the Engineer- in- Charge. | 6.00 | Sqm | Excess(+) | 1 | Full Conversion | INR | 0.00 | 0.00 | INR Zero Only | 1.02 | Construction of chamber for 100mm sluice plates | item2 | 213 | Nos | |||||||||||||||||||||||||||||||||||||||
| 141.02 | b) 18 mm thick machine cut and single side machine polished Baroda green marble stone for window jamb & bottom of lintel in single piece laid over 20 mm thick 1:4 ready mix cement mortar including half round moulding & polishing of exposed face etc. complete all as per drg, specifications and as directed by the Engineer- in- Charge. | 6.00 | Sqm | Excess(+) | 1 | Full Conversion | INR | 0.00 | 0.00 | INR Zero Only | 1.02 | Construction of chamber for 100mm sluice plates | item2 | 213 | Nos | |||||||||||||||||||||||||||||||||||||||
| 142 | Supplying 18 mm thick of Telephone black colour, bothside polished, rounded corner, edges moulded, Granite Partition plate of following size, fixing the partition in position, embedding 75 mm deep into the wall with cement concrete 1:1.5:3, including cutting chases of size 75 mm X 100 mm in the wall, finishing the joints with white cement etc. all complete as directed. Note:-Exposed finished size only will be measured for payment. | 1.02 | Construction of chamber for 100mm sluice plates | item2 | 213 | Nos | ||||||||||||||||||||||||||||||||||||||||||||||||
| 142.01 | 1500 mm (height) x 575 mm (width) size (Exposed finished size) for intermediate partition and end partitions as per requirement | 6.30 | Sqm | Excess(+) | 1 | Full Conversion | INR | 0.00 | 0.00 | INR Zero Only | 2 | Construction of chamber for 100mm sluices valve | item3 | 10 | Nos | |||||||||||||||||||||||||||||||||||||||
| 143 | Repairs to damaged RCC structural members at all locations/ floors using polymer modified cementatious mortar, for strengthening the existing RCC structural members using acrylic based polymer and comprising the following operations: 1. Breaking cracked / spalled concrete members along the cracks with plaster, including removing and stacking of all unserviceable material at site, simultaneous transportation and disposed at a location in Anushaktinagar as identified by EIC. complete all as per specifications and as directed by the Engineer-in Charge. 2. Exposing and cleaning the reinforcement thoroughly by light tapping / wire brushing of using strong emery paper and finally by acetone /rust remover of Dr. Fixit / Anuvi chemicals / Fosroc or other equivalent. 3. Applying a coat of polymer and cement slurry in the ratio 1:1 by volume to the reinforcement bars. 4. Polymer required for the work shall be procured by the Agency from approved Manufacturers Like M/s Astra , M/s Anuvi, M/s Apcotex or other approved equivalent manufacturer confirming to technical requirements as below and the invoices/challans etc to be submitted to EIC for record. Appearance: Milky white Ph- value : 9-10 Specific gravity : 1.055+/-0.005 Solid contents(%w/w)-: 44+/-1 Viscosity at 25 degree C temperature (in sec): 15-20 Testing of the material as per relevant codes at NABL approved third party Lab. is to be done by the Agency for every batch/lot of supply. 5. Bond coat should be applied @ 0.37 ltr./layer/sq.m. 6. Minimum FM of silica sand should be 2.10 | 2 | Construction of chamber for 100mm sluices valve | item3 | 10 | Nos | ||||||||||||||||||||||||||||||||||||||||||||||||
| 143.01 | a) Building up with polymer modified cementatious mortar for RCC structural members etc. in layers not exceeding 20 mm in a day (proportion – cement 50 Kg. : Silica sand 125 Kg. : polymer liquid 10 ltrs.) with necessary bond coat (polymer : Cement = 1:1 by volume) for tack coat and also for subsequent layers using polymer including curing, covering the flooring /window with tarpaulins or equivalent covering material to avoid deposition of polymer mortar and cleaning of floor / windows thoroughly on completion of repair work etc. complete all as per specifications and as directed by the Engineer-in-charge. Polymer used for this work in KG shall be measured for payment. | 60.00 | Kg | Excess(+) | 1 | Full Conversion | INR | 0.00 | 0.00 | INR Zero Only | 1.02 | Construction of chamber for 100mm sluice plates | item2 | 213 | Nos | |||||||||||||||||||||||||||||||||||||||
| Total in Figures | 0.00 | 0.00 | INR Zero Only | 4 | Construction of chamber for 100mm sluice plates | item5 | 10 | Nos | ||||||||||||||||||||||||||||||||||||||||||||||
| Quoted Rate in Figures | Select | 0.0000 | 0.0000 | Zero Only | ||||||||||||||||||||||||||||||||||||||||||||||||||
| Quoted Rate in Words | INR Zero Only |
| Item Rate BoQ | 1 | |||||||||||||||||||||||||||||||||||||||||||||||||||||
| BoQ_Ver4.0 | Item Rate | Normal | INR Only | INR | ||||||||||||||||||||||||||||||||||||||||||||||||||
| Select, Excess (+), Less (-) | Less (-) | |||||||||||||||||||||||||||||||||||||||||||||||||||||
| Tender Inviting Authority: | ||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Name of Work: Construction of Public Toilet Facility Near Wester Sector at Anushaktinagar and Anuban at Old Mandala, Renovation of Toilets at Diepensary No-8,9 at Anushaktinagar and Anand Bhavan at Bhulabhai Desai Raod,Mumbai. | ||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Contract No: DCSEM/CQD/QSB/25-26/NIT/46 dt.12.08 .2025 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Name of the Bidder/ Bidding Firm / Company : | ||||||||||||||||||||||||||||||||||||||||||||||||||||||
| PRICE SCHEDULE (This BOQ template must not be modified/replaced by the bidder and the same should be uploaded after filling the relevant columns, else the bidder is liable to be rejected for this tender. Bidders are allowed to enter the Bidder Name and Values only) | ||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Sl. No. | Item Description | Item Code / Make | Quantity | Units | Estimated Rate | Addition / Deduction | Addition / Deduction Values | Currency Convertion against each Item | Quoted Currency in INR / Other Currency | BASIC RATE In Figures To be entered by the Bidder Rs. P | Excise Duty | VAT | Freight Charges ( Unloading & Stacking) | Any Other Taxes/Duties/Levies | Other Taxes 2 | IIIrd Party i.e DGS&D / RITES etc Inspection Charges @0.34%+Service Tax | Less for Cenvat Credit,if any respect of Supplies Under full Excise Duty Category | TOTAL AMOUNT Without Taxes | TOTAL AMOUNT With Taxes | TOTAL AMOUNT In Words | ||||||||||||||||||||||||||||||||||
| 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 10 | 11 | 12 | 13 | 14 | 15 | 16 | 17 | 18 | 19 | 20 | 21 | 22 | 23 | 24 | 25 | 26 | 27 | 28 | 29 | 30 | 31 | 32 | 33 | 34 | 35 | 36 | 37 | 38 | 39 | 40 | 41 | 42 | 43 | 44 | 45 | 46 | 47 | 48 | 49 | 50 | 51 | 52 | 53 | 54 | 55 |
| 2 | PART- B : PH WORKS | 1.01 | Supplying, Conveying and fixing spls. Including eart | item1 | 123.223 | Nos | ||||||||||||||||||||||||||||||||||||||||||||||||
| 201 | Providing and fixing in position following Vitreous China pedestal type wash down pattern water closet, wash basin and supporting rails for paraplegic consisting following items of work:- (i) Providing Vitreous china pedestal type wash down pattern water closet (EWC) conforming to IS 2556 (Part II) with integral "P" trap outlet with water seal not less than 50mm with vent and necessary supports. (ii) Providing thermosetting or thermoplastic seat & cover conforming to IS 2548, fixing seat & cover for water closet as per manufacturer's specification including the cost of corrosion resistant hinges, bolts, nuts, non ferrous or 5.5.washer etc. all complete. (iii) Fixing the water closet in position, jointing the trap, water closet and UPVC pipe by Epoxy grout or Rubber seal as per pipe manufacturer. (iv) Providing wash basin and placing in the position as shown in the drawing or as per manufacturers specification or as directed including finishing the joints with white/matching colour cement all complete. (v) Providing various CP fittings such as Waste Coupling of Jaquar Cat No. 705/709, Bottle Trap of Jaquar Cat No. 769 including fixing 32mm minimum 10 Kg class PVC pipe conforming to IS:4985 (and fittings conforming to IS:7834). Placing and fixing waste pipe. (vi) Fixing the wash basin in position, including providing MS/C.I Brackets & Screws for the basin. (vii) Fixing grab rails as per drawings or manufacturer's recommendations. (viii) Cutting hole, making groove or chases in the wall, floors, slabs etc. reinstating to it's original conditions after completion of work, painting all metallic parts with two coats of flat oil paint of approved make & shade over a coat of primer, finishing the gaps with white/matching colour cement etc. all complete (ix) Testing the system to the full satisfaction of the Engineer-In-Charge. (x) Supply & fixing SS finish brass two way action hinges for Paraplegic toilet door. 1.1 Vitreous China European Water Closet Paraplegic set of Standard colour with P trap of Hindware make Cat No.70002 Matrix Set-1 consisting of Wash basin 65 X 35 cm with one pair mounting brackets, EWC & Cistern complete with fittings & seat cover, one no. hinged rail 76 cm and four no.s, of grab rails 60 CM etc. complete all as per specification and as directed by EIC. | 3.00 | Each | Excess(+) | 1 | Full Conversion | INR | 0.00 | 0.00 | INR Zero Only | 1.02 | Construction of chamber for 100mm sluice plates | item2 | 213 | Nos | |||||||||||||||||||||||||||||||||||||||
| 202 | Providing & fixing Health type (Anglo-Indian ) water closet with with 'P' or 'S' trap of size 510 mm x 450 mm etc.complete all as per specifications and as directed by the Engineer-in-Charge. Including cost of removing the existing one & disposing of debris out side Colony etc. complete all as per specifications and as directed by the Engineer-in-Charge. | 1.00 | Each | Excess(+) | 1 | Full Conversion | INR | 0.00 | 0.00 | INR Zero Only | 2 | Construction of chamber for 100mm sluices valve | item3 | 10 | Nos | |||||||||||||||||||||||||||||||||||||||
| 203 | Providing & fixing European water closet conforming to IS 2556 (part II ) with 'P' or 'S' trap wash down pattern European water closet of approved (Cera, hindware/parryware) make in white glazed vitreous of size 460 mm x 330 mm ,including all fixing accessories, white cement & including cost of removing the existing one & disposing of debris out side colony etc complete all as per specifications and as directed by the Engineer-in-Charge. | 4.00 | Each | Excess(+) | 1 | Full Conversion | INR | 0.00 | 0.00 | INR Zero Only | 1.02 | Construction of chamber for 100mm sluice plates | item2 | 213 | Nos | |||||||||||||||||||||||||||||||||||||||
| 204 | Providing & fixing Orissa pattern W.C. of approved make comprising of Orissa pattern W.C. with 'P' or 'S' trap best Indian make in white glazed vitreous china ware of size 580 mm x 400 mm including the cost of removing the existing damaged / broken and making good the surrounding with cement mortar / concrete tiles maching to the existing finish & disposing of debris etc complete all as per specifications and as directed by the Engineer-in-Charge. | 7.00 | Each | Excess(+) | 1 | Full Conversion | INR | 0.00 | 0.00 | INR Zero Only | 1.02 | Construction of chamber for 100mm sluice plates | item2 | 213 | Nos | |||||||||||||||||||||||||||||||||||||||
| 205 | Providing & fixing first quality Vitreous China Urinal basin consisting following items of work :- i) Providing & fixing Urinal basin of following make and placing it in position as shown in the drawing or as directed by EIC with CP screws, rawl plug, M.Sbrackets etc. as per manufacturer's recommendation including finishing with white/matching colour cementetc. ii) Providing various CP fittings such as Waste Coupling of Jaquar Cat No. 705/709, Bottle Trap of Jaquar Cat. No. 769 including provision and fixing 32 mm minimum 10kg class PVC pipe conforming to IS:4985 (and fittings conforming to IS:7834) Waste Pipe from Bottle trap to adaptor / Nahani trap / Floor Trap. ( Bottle trap & waste coupling will be paid separately under the relevant item.) iii) Cutting hole, making grove or chases in the wall, floors, slabs etc., reinstating to it's original condition after completion of work, painting all metallic parts with two coats of flat oil paint of approved make & shade over a coat of primer, finishing the gaps etc. all complete as directed by Engineer-in Charge. iv) Testing the system to the full satisfaction of the Engineer in Charge | 1.02 | Construction of chamber for 100mm sluice plates | item2 | 213 | Nos | ||||||||||||||||||||||||||||||||||||||||||||||||
| 205.01 | Vitreous China Urinal basin of Star White colour ofHindware Brand as per cat. No. 60002 'Flat back large' or Cera c. No.S4020112 or Parryware Cat. No.C0583 model size 59 cm X 39 cm X 37.5 cm with concealed spray holes for flushing and with built-in water seal/Cera make Snow white colour urinal flat back model number 5001 (size 63.5cmx39.5cmx42cm) with concealed spray holes. | 7.00 | Each | Excess(+) | 1 | Full Conversion | INR | 0.00 | 0.00 | INR Zero Only | 2 | Construction of chamber for 100mm sluices valve | item3 | 10 | Nos | |||||||||||||||||||||||||||||||||||||||
| 206 | Providing & fixing wash basin of approved make with plain rims in white glazed vitreous chinaware supported on suitable wall brackets and of size mentioned below, including cost of removing the existing wash basin and necessary C.I. brackets shall be provided by the contractor including fixing the existing fittings such as pillar cock, inlet connection, stop cock, waste coupling, bottle trap etc. & disposing of debris, complete all as per specifications and as directed by the Engineer-in-Charge. | 2 | Construction of chamber for 100mm sluices valve | item3 | 10 | Nos | ||||||||||||||||||||||||||||||||||||||||||||||||
| 206.01 | i) 550 mm x 400 mm. | 9.00 | Nos | Excess(+) | 1 | Full Conversion | INR | 0.00 | 0.00 | INR Zero Only | 1.02 | Construction of chamber for 100mm sluice plates | item2 | 213 | Nos | |||||||||||||||||||||||||||||||||||||||
| 207 | Providing & fixing approved C.P. brass towel rods of size 600 mm x 20 mm with a pair of C.P. brass brackets, wall flanges C.P. brass brackets, wall flanges etc. fixed to wall with C.P. brass screws, screwed on to rawl plugs etc complete including the cost of removing the existing one & returning to Stores etc complete all as per specifications and as directed by the Engineer-in-Charge. | 8.00 | Nos | Excess(+) | 1 | Full Conversion | INR | 0.00 | 0.00 | INR Zero Only | 1.02 | Construction of chamber for 100mm sluice plates | item2 | 213 | Nos | |||||||||||||||||||||||||||||||||||||||
| 208 | Providing and fixing heavy quality 15 mm n.b. C.P. brass pillar tap with jam nuts of easy clean variety including removing the existing and depositing to deptt stores etc complete all as per specifications and as directed by the Engineer-in-Charge. | 10.00 | Nos | Excess(+) | 1 | Full Conversion | INR | 0.00 | 0.00 | INR Zero Only | 1.02 | Construction of chamber for 100mm sluice plates | item2 | 213 | Nos | |||||||||||||||||||||||||||||||||||||||
| 209 | Providing & fixing C.P. brass bottle trap with C.P. brass extension piece & wall flange etc complete 32 mm n.b. including removing the existing one & depositing to deptt stores etc complete all as per specifications and as directed by the Engineer in charge. | 10.00 | Nos | Excess(+) | 1 | Full Conversion | INR | 0.00 | 0.00 | INR Zero Only | 2 | Construction of chamber for 100mm sluices valve | item3 | 10 | Nos | |||||||||||||||||||||||||||||||||||||||
| 210 | Providing and fixing heavy quality 15 mm n.b. C.P. brass bib tap of easy clean variety conforming to IS:781, on existing G.I. pipe line including removing the existing and depositing to deptt stores etc complete all as per specifications and as directed by the Engineer-in-Charge. | 8.00 | Nos | Excess(+) | 1 | Full Conversion | INR | 0.00 | 0.00 | INR Zero Only | 1.02 | Construction of chamber for 100mm sluice plates | item2 | 213 | Nos | |||||||||||||||||||||||||||||||||||||||
| 211 | Providing & fixing heavy quality 15 mm dia inlet connection with unions at the ends plastic pipes with brass unions including the cost of removing the existing one etc complete all as per specifications and as directed by the Engineer-in-Charge. | 1.02 | Construction of chamber for 100mm sluice plates | item2 | 213 | Nos | ||||||||||||||||||||||||||||||||||||||||||||||||
| 211.01 | a) size 600 mm long | 19.00 | Each | Excess(+) | 1 | Full Conversion | INR | 0.00 | 0.00 | INR Zero Only | 2 | Construction of chamber for 100mm sluices valve | item3 | 10 | Nos | |||||||||||||||||||||||||||||||||||||||
| 212 | Providing and fixing approved quality 10 Ltrs. capacity SLIMLINE or CERA or approved equivalent flushing cistern High / low level conforming to relevant IS, including all internal fittings, pull chain/Knob , heavy duty PVC pipe/bend connecting with existing concealed/open pipe leading to water closet and reinstating /making joint leak tight etc mounted on brackets , including cost of removing the existing one depositing to deptt. stores etc complete all as per specifications and as directed by the Engineer-in-Charge. | 2 | Construction of chamber for 100mm sluices valve | item3 | 10 | Nos | ||||||||||||||||||||||||||||||||||||||||||||||||
| 212.01 | a) P.V.C. cistern conforming to relevant IS. | 10.00 | Nos | Excess(+) | 1 | Full Conversion | INR | 0.00 | 0.00 | INR Zero Only | 1.02 | Construction of chamber for 100mm sluice plates | item2 | 213 | Nos | |||||||||||||||||||||||||||||||||||||||
| 213 | Providing & fixing in position best quality bevelled edge plate Glass Mirror of 6mm thick with marine ply wood back 6 mm thick, CP brass cup screws and caps, washers etc. including providing & fixing rawl plug in wall, wooden packing behind the mirror if necessary, reinstating the damages to its original condition etc. and painting the ply with 2 coats of Synthetic enamel paint over a coat of wood primer. all complete as directed by Engineer-in-Charge. | 1.02 | Construction of chamber for 100mm sluice plates | item2 | 213 | Nos | ||||||||||||||||||||||||||||||||||||||||||||||||
| 213.01 | a) size 600 x 450 mm. | 8.00 | Nos | Excess(+) | 1 | Full Conversion | INR | 0.00 | 0.00 | INR Zero Only | 1.02 | Construction of chamber for 100mm sluice plates | item2 | 213 | Nos | |||||||||||||||||||||||||||||||||||||||
| 214 | Providing & fixing in position 550x100mm wide & 6 mm thick Glass shelf with brass brackets of approved quality and fixing the Glass shelf on the wall to proper line & level using wall brackets with 40 mm long CP brass screws including making the wall to it's original condition and moulding of edges of glass etc. all as per specification & as directed by EIC. | 7.00 | Each | Excess(+) | 1 | Full Conversion | INR | 0.00 | 0.00 | INR Zero Only | 2 | Construction of chamber for 100mm sluices valve | item3 | 10 | Nos | |||||||||||||||||||||||||||||||||||||||
| 215 | Providing & fixing in position 15 mm diameter CP brass Stop Cock / Angle cock confirming to IS / approved make fixing the cock in position with white zinc and spun yarn, testing the joints for leakage etc. all complete as per specifications and as directed by EIC | 2 | Construction of chamber for 100mm sluices valve | item3 | 10 | Nos | ||||||||||||||||||||||||||||||||||||||||||||||||
| 215.01 | i) Angular Stop Cock with wall Flang similar to 'FLORENTINE Series' of ' JAQUAR' cat. No. 5053 | 16.00 | Each | Excess(+) | 1 | Full Conversion | INR | 0.00 | 0.00 | INR Zero Only | 1.02 | Construction of chamber for 100mm sluice plates | item2 | 213 | Nos | |||||||||||||||||||||||||||||||||||||||
| 216 | Providing and fixing of PVC Nahani Trap of Prince or supreme or other approved make with 100mm / 75 mm openings including carefully removing of old damaged nahani trapat all level and disposing debris at the directed place all complete and as directed by Engineer-in-Charge. | 14.00 | Nos | Excess(+) | 1 | Full Conversion | INR | 0.00 | 0.00 | INR Zero Only | 1.02 | Construction of chamber for 100mm sluice plates | item2 | 213 | Nos | |||||||||||||||||||||||||||||||||||||||
| 217 | Supplying and laying below the ground or floor, the following diameter ASTM nonthreaded UPVC solvent welded pipes as per ASTM D-1785 and fittings as per ASTM D-2466 and ASTM D-2467 (white or off-white colour) of specified class, consisting the following - i) Supplying & fixing ASTM nonthreaded UPVC solvent welded pipes as per ASTM D-1785 and fittings as per ASTM D-2466 and ASTM D-2467. ii) Laying and fixing the pipe and specials below the ground or floor to correct line, level and plumb for water supply line. iii) Testing the pipe line to a hydraulic pressure as per manufacturers catalogue for leak proof joint or as per relevant code. iv) Making leak proof threaded / welded joints. including cutting the pipe, cleaning, marking, heating, welding, cooling etc. and the cost of jointing materials. v) Cutting or making hole or chases in RCC or brick work structure such as wall, column, beam, slab, chajja, dado etc. for passing the pipe line and reinstating all the damage to its original condition. vii) Providing and fixing UPVC weldable / threaded fittings such as Union, Nipples, Bends, Elbows, Tees, Reducers, End caps, Couplers, Adaptors, Saddles, Plugs, Tank connectors, Expansion loops, Bypass bends, etc. vii) UPVC pipes and fittings/ specials shall be of same brand. NOTE: 1) The rate shall also include for UPVC pipe & specials required for making connections with the existing GI/ CPVC/PP-R/ CPVC/HDPE pipe line laid by other agency. 2) All threaded joints shall be made with brass threaded fittings only. | 1.02 | Construction of chamber for 100mm sluice plates | item2 | 213 | Nos | ||||||||||||||||||||||||||||||||||||||||||||||||
| 217.01 | Schedule 80 50 mm (2") n.size (Schedule 80) | 240.00 | RM | Excess(+) | 1 | Full Conversion | INR | 0.00 | 0.00 | INR Zero Only | 2 | Construction of chamber for 100mm sluices valve | item3 | 10 | Nos | |||||||||||||||||||||||||||||||||||||||
| 218 | G.I. / C.I. PIPES : Providing, laying, jointing, fixing, testing & painting heavy quality (Class 'C') M.S. galvanized pipes as per I.S. 1239-1968 including fittings like elbows, collars, tees, unions, couplings, reducers, enlargers, bends and all other tittings required for the completion except screwed flanges conforming to I.S.1239-1968 & also as per the code of practice of water supply in bldgs. of I.S.2065-1972 including laying under floors, chasing, in walls, roof slabs and making good the same to the original conditions, including the cost of all jointing materials like hemp yarn, white or red lead, clamps, wooden gutties, screws, cement, sand etc. including removing the old damaged G.I. pipes & handing over to dept. stores, scaffolding, testing the pipes etc. complete all as per specification and as directed by the Engineer-in-Charge. | 1.02 | Construction of chamber for 100mm sluice plates | item2 | 213 | Nos | ||||||||||||||||||||||||||||||||||||||||||||||||
| 218.01 | i) 25 mm n.b. | 30.00 | RM | Excess(+) | 1 | Full Conversion | INR | 0.00 | 0.00 | INR Zero Only | 1.02 | Construction of chamber for 100mm sluice plates | item2 | 213 | Nos | |||||||||||||||||||||||||||||||||||||||
| 218.02 | ii) 32 mm n.b. | 110.00 | RM | Excess(+) | 1 | Full Conversion | INR | 0.00 | 0.00 | INR Zero Only | 1.02 | Construction of chamber for 100mm sluice plates | item2 | 213 | Nos | |||||||||||||||||||||||||||||||||||||||
| 219 | Supplying and fixing following size PVC-SWR pipes and Fittings for soil, waste, vent and rainwater pipe lines consisting following items of work:- i) Supplying PVC - SWR pipes and fittings conforming to IS 13592 of approved make and standard PVC clamps ( approx. 3.2 mm thick ) and nails or MS galvanised clamps having minimum 3 mm thick for fixing the pipe. ii) Fixing the pipeline vertically to plumb, keeping the pipe barrel 50 mm away from the wall face, using PVC or MS galvanised clamps. away from the wall face, using PVC or MS galvanised clamps. iii) Providing and fixing PVC Domed roof outlet (grating ) for RWP & PVC cowl for waste / soil pipe. iv) Jointing the PVC pipes and specials by PVC solvent cement, rubber lubricant with rubber rings or any other approved equivalent method. v) Laying the pipeline below the ground to proper slope and gradient for making connection of soil and vent pipeline ( Vertical stacks ) with inspection chamber or manhole and waste water pipeline with gully trap chamber including the cost of cement mortar, water proofing compound etc., testing the vertical pipeline by smoke test and horizontal pipeline by 600 mm head of water and rectifying the leakages, if any all complete including encasing the pipe line using CC 1:3:6 etc. all complete. vi) Cutting or making hole in RCC or brick work and reinstating the surface to it's original condition after passing the pipe with cement mortar / cement concrete etc. by adding approved water proofing compound. NOTE: Rate quoted shall be for each item including removal of existing damaged material and depositing to Deptt. Stores / disposing off the debris. PVC - SWR Pipe & Fittings ( TYPE-B ) | 2 | Construction of chamber for 100mm sluices valve | item3 | 10 | Nos | ||||||||||||||||||||||||||||||||||||||||||||||||
| 219.01 | a) 32/40 mm dia. | 35.00 | RM | Excess(+) | 1 | Full Conversion | INR | 0.00 | 0.00 | INR Zero Only | 2 | Construction of chamber for 100mm sluices valve | item3 | 10 | Nos | |||||||||||||||||||||||||||||||||||||||
| 219.02 | b) 75 mm dia. | 55.00 | RM | Excess(+) | 1 | Full Conversion | INR | 0.00 | 0.00 | INR Zero Only | 1.02 | Construction of chamber for 100mm sluice plates | item2 | 213 | Nos | |||||||||||||||||||||||||||||||||||||||
| 219.03 | c) 110 mm dia | 112.00 | RM | Excess(+) | 1 | Full Conversion | INR | 0.00 | 0.00 | INR Zero Only | 1.02 | Construction of chamber for 100mm sluice plates | item2 | 213 | Nos | |||||||||||||||||||||||||||||||||||||||
| 219.04 | d) 160 mm dia | 100.00 | RM | Excess(+) | 1 | Full Conversion | INR | 0.00 | 0.00 | INR Zero Only | 1.02 | Construction of chamber for 100mm sluice plates | item2 | 213 | Nos | |||||||||||||||||||||||||||||||||||||||
| 220 | Providing & fixing on Exposed or concealed surfaces the following dia Chlorinated Polyvinyl Chloride (C-PVC) pipe of specified class of M/s. SUREME / PRINCE or other approved equivalent consisting following items of work:- i) Supplying & fixing C-PVC pipes, including necessary all fittings conforming to IS 15778 ii) Laying and fixing the pipe and specials on exposed surfaces to correct line, level and plumb for water supply line, overflow and vent using M.S. nails/screws, rawl plugs, wooden gutties and branded clamps of Supreme/Prince make to the pipeline as per the site requirement. iii) Testing the pipe line to a hydraulic pressure as per manufacturers cataglouge for leak proof joint or as per relevant code iv) Making leak proof threaded / solvent joints. including cutting the pipe, Joint preparation, cleaning, marking, application of solvent, assembling, curing etc. and the cost of jointing cement solvent materials. v) Cutting or making hole or chases in RCC or brick work structure such as wall, column, beam, slab, chajja, dado etc. for passing the pipe line and reinstating all the damage to its original condition. proof joints. vi) Providing and fixing C-PVC jointable / threaded fittings such as Union, Nipples, Bendes, Elbows, Tees, Reducers, End caps, Couplers, Adaptors, Saddles, Plugs, Tank connectors, Expansion loops, Bypass bends, etc vii) including removing existing GI pipe line with fittings and specials etc. Note:- All brass threaded elbows and fittings shall be with additional support type of M/s. Prime, Supreme or other equivalent approved by EIC including necessary fixing arrangement such as screws, plug etc complete. ( Mode measurement :- The measurement shall per Unit RM length of pipe line laid or fixed. The measurement shall be taken along centre line of pipe. No measurement shall be recorded separately for fittings etc. ) SDR 11 Pipes and Fittings | 1.02 | Construction of chamber for 100mm sluice plates | item2 | 213 | Nos | ||||||||||||||||||||||||||||||||||||||||||||||||
| 220.01 | a) 15 mm n.b | 75.00 | RM | Excess(+) | 1 | Full Conversion | INR | 0.00 | 0.00 | INR Zero Only | 2 | Construction of chamber for 100mm sluices valve | item3 | 10 | Nos | |||||||||||||||||||||||||||||||||||||||
| 220.02 | b) 20 mm n.b | 60.00 | RM | Excess(+) | 1 | Full Conversion | INR | 0.00 | 0.00 | INR Zero Only | 2 | Construction of chamber for 100mm sluices valve | item3 | 10 | Nos | |||||||||||||||||||||||||||||||||||||||
| 220.03 | c) 25 mm n.b | 25.00 | RM | Excess(+) | 1 | Full Conversion | INR | 0.00 | 0.00 | INR Zero Only | 2 | Construction of chamber for 100mm sluices valve | item3 | 10 | Nos | |||||||||||||||||||||||||||||||||||||||
| 220.04 | d) 32 mm n.b | 9.00 | RM | Excess(+) | 1 | Full Conversion | INR | 0.00 | 0.00 | INR Zero Only | 1.02 | Construction of chamber for 100mm sluice plates | item2 | 213 | Nos | |||||||||||||||||||||||||||||||||||||||
| 220.05 | e) 40 mm n.b | 9.00 | RM | Excess(+) | 1 | Full Conversion | INR | 0.00 | 0.00 | INR Zero Only | 1.02 | Construction of chamber for 100mm sluice plates | item2 | 213 | Nos | |||||||||||||||||||||||||||||||||||||||
| 221 | Providing & fixing cloranite CPVC ball valve of class SDR11 of M/s. Supreme , M/s. Prince or other approved equivalent including all necessary fittings & fixtures to fixing correct line , level, plumb for water supply line , making leake proof solvent joints, including cost of all jointing solvent materials and testing to a hydraulic pressure for leak-proof joint etc. all complete all as per the specifications and as directed by the E-I-C. | 1.02 | Construction of chamber for 100mm sluice plates | item2 | 213 | Nos | ||||||||||||||||||||||||||||||||||||||||||||||||
| 221.01 | 15 mm dia | 6.00 | Each | Excess(+) | 1 | Full Conversion | INR | 0.00 | 0.00 | INR Zero Only | 2 | Construction of chamber for 100mm sluices valve | item3 | 10 | Nos | |||||||||||||||||||||||||||||||||||||||
| 221.02 | 20 mm dia | 6.00 | Each | Excess(+) | 1 | Full Conversion | INR | 0.00 | 0.00 | INR Zero Only | 2 | Construction of chamber for 100mm sluices valve | item3 | 10 | Nos | |||||||||||||||||||||||||||||||||||||||
| 221.03 | 25 mm dia | 5.00 | Each | Excess(+) | 1 | Full Conversion | INR | 0.00 | 0.00 | INR Zero Only | 2 | Construction of chamber for 100mm sluices valve | item3 | 10 | Nos | |||||||||||||||||||||||||||||||||||||||
| 222 | Providing and fixing in position heavy pattern screw down gun metal Gate Valve conforming to IS:778 with hand wheels at top including testing for 10 Kg./Sq.cement mortar. pressure with clean and potable water with a minimum testing duration of two hours etc including removing gun metal Gate valve & returning to deptt stores etc complete all as per specifications and as directed by the Engineer in Charge. | 1.02 | Construction of chamber for 100mm sluice plates | item2 | 213 | Nos | ||||||||||||||||||||||||||||||||||||||||||||||||
| 222.01 | i) 25 mm n.b. | 2.00 | Nos | Excess(+) | 1 | Full Conversion | INR | 0.00 | 0.00 | INR Zero Only | 1.02 | Construction of chamber for 100mm sluice plates | item2 | 213 | Nos | |||||||||||||||||||||||||||||||||||||||
| 222.02 | ii) 32 mm n.b. | 8.00 | Nos | Excess(+) | 1 | Full Conversion | INR | 0.00 | 0.00 | INR Zero Only | 1.02 | Construction of chamber for 100mm sluice plates | item2 | 213 | Nos | |||||||||||||||||||||||||||||||||||||||
| 222.03 | iii) 50 mm n.b. | 8.00 | Nos | Excess(+) | 1 | Full Conversion | INR | 0.00 | 0.00 | INR Zero Only | 2 | Construction of chamber for 100mm sluices valve | item3 | 10 | Nos | |||||||||||||||||||||||||||||||||||||||
| 223 | Providing & fixing in position at all levels HDP Tanks of Sintex or equilevent make of following capacity rotationary moulded Polyethylene (with 2.5% carbon black compound) water storage tank conforming to IS 10146 including providing & fixing lockable MS cover (with Frame) with suitable locking arrangements as approved by the Municipal Corporation / local statutory Body, placing and supporting the whole bottom area of the tank on existing base / platform , making inlet ,overflow and scour connection up to 50mm size drilling hole in the tank , including providing and fixing PVC specials , hexagonal check nuts , washer ,nipples, union and the cost of joining materials , ball cock etc. all as per specification including disconnecting the existing outlet pipes / connection s and removing old Sintex tanks with ball cocks etc. and complete all as directed by the Engineer-In Charge. | 1.02 | Construction of chamber for 100mm sluice plates | item2 | 213 | Nos | ||||||||||||||||||||||||||||||||||||||||||||||||
| 223.01 | a) 1000 Ltr. Capacity cylindrical vertical type of Sintex or equivalent approved make . | 4.00 | each | Excess(+) | 1 | Full Conversion | INR | 0.00 | 0.00 | INR Zero Only | 1.02 | Construction of chamber for 100mm sluice plates | item2 | 213 | Nos | |||||||||||||||||||||||||||||||||||||||
| 223.02 | a) 2000 Ltr. Capacity cylindrical vertical type of Sintex or equivalent approved make . | 1.00 | each | Excess(+) | 1 | Full Conversion | INR | 0.00 | 0.00 | INR Zero Only | 2 | Construction of chamber for 100mm sluices valve | item3 | 10 | Nos | |||||||||||||||||||||||||||||||||||||||
| 224 | Construction of Inspection Chamber of internal clear dimension 900 x 600 mm in 230 mm thick brick masonry in ready mix cement mortar 1:4 over a bed of 150 mm thick 1:4:8 C.C. foundation, plastering within ready mix cement mortar 1:4, 20 mm thick on inside, outside, and all exposed surfaces finished with the floating coat of neat cement 1:2:4 C.C. for benching and channel, finished with neat cement, brick corbelling at top to provide clear opening of 900 mm x 450 mm etc complete including dismantling existing chambers & disposing of debris out side colony ( depth of chamber not exceeding 900 mm) all as per specifications and as directed by the Engineer-in-Charge. | 10.00 | Nos | Excess(+) | 1 | Full Conversion | INR | 0.00 | 0.00 | INR Zero Only | 1.02 | Construction of chamber for 100mm sluice plates | item2 | 213 | Nos | |||||||||||||||||||||||||||||||||||||||
| 225 | Supplying and fixing square gully trap 110mm of Nu-Drain System of M/s. Supreme or equivalent approved make including cost of labour material transportation and making the connection with existing outlet of building and providing and fixing of CI frame & cover of 7.5 kg minimum at top including 150mm thick PCC 1:3:6 & 230 mm thick brick work & 20mm thick plaster alround for fixing etc complete all as per manufacturer's specification and as directed by Engineer-in-Charge . | 7.00 | Nos | Excess(+) | 1 | Full Conversion | INR | 0.00 | 0.00 | INR Zero Only | 2 | Construction of chamber for 100mm sluices valve | item3 | 10 | Nos | |||||||||||||||||||||||||||||||||||||||
| 226 | Providing Flushing arrangement to Urinal etc., including providing and fixing manually operated flush valves consisting following items of work:-i) Providing and fixing flush valve in position using CP brass screws, rawl plugs, brackets etc.as per the manufacturer's recommendation, making inlet and outlet connections all complete.ii) Providing 40/32/25/20/15 mm nominal dia. CPVC Pipe from Flush Valve with Urinal including the cost of fittings, fixtures, reducers, CP brass fittings on exposed/concealed portion and jointing materials etc. all complete.iii) Cutting hole, making chases in the wall, floors, slabs etc. and reinstating the surface to the original condition, painting all metallic parts with two coats of flat oil paint of approved make and shade over a coat of primer, finishing the gaps with white/ matching cement etc. all complete.iv) Testing the entire system to the full satisfaction of the E.I.C. | 1.02 | Construction of chamber for 100mm sluice plates | item2 | 213 | Nos | ||||||||||||||||||||||||||||||||||||||||||||||||
| 226.01 | Auto closing Urinal flush valve of Jaquar brand 'Pressmatic' as per Cat No.PRS-077 or approved equivalent make including making inlet and outlet connections all complete | 7.00 | Each | Excess(+) | 1 | Full Conversion | INR | 0.00 | 0.00 | INR Zero Only | 1.02 | Construction of chamber for 100mm sluice plates | item2 | 213 | Nos | |||||||||||||||||||||||||||||||||||||||
| 227 | C.P brass long body Bib tap 2 in 1 similar to . FLORENTINE Series' of ' JAQUAR' cat. No. 5041 including providing and 'fixing Health faucet with 1.0 mt long flexible tube and wall hook( JAQUAR make Cat. No. 573). | 8.00 | Each | Excess(+) | 1 | Full Conversion | INR | 0.00 | 0.00 | INR Zero Only | 1.02 | Construction of chamber for 100mm sluice plates | item2 | 213 | Nos | |||||||||||||||||||||||||||||||||||||||
| 228 | Providing Flushing arrangement to Water Closet etc., including providing and fixing manually operated Dual type flush valves consisting following items of work:- i) Providing and fixing flush valve in position using CP brass screws, rawl plugs, brackets etc.as per the manufacturer's recommendation, making inlet and outlet connections all complete. ii) Providing 40/32 mm dia. uPVC(6Kg) flush pipe from Flush Valve to Water Closet concealed in the wall as directed iii) making connection with W.C pan and flush valve including the cost of fittings, fixtures and jointing materials etc. all complete . iv) Cutting hole, making chases in the wall, floors, slabs etc. and reinstating the surface to the original condition, painting , finishing the gaps with white/ matching cement etc. all complete. v) Testing the entire system to the full satisfaction of the E.I.C. | 2 | Construction of chamber for 100mm sluices valve | item3 | 10 | Nos | ||||||||||||||||||||||||||||||||||||||||||||||||
| 228.01 | Flushing arrangement with dual type concealed flush valve of Jaquar make Cat No.FLV-1085N / FLV-1085NSQ or equivalent , Flush bend, cutting hole, testing etc. all complete as per EIC. | 4.00 | Each | Excess(+) | 1 | Full Conversion | INR | 0.00 | 0.00 | INR Zero Only | 2 | Construction of chamber for 100mm sluices valve | item3 | 10 | Nos | |||||||||||||||||||||||||||||||||||||||
| 229 | Providing & fixing in position following approved qualityPTMT fittings / Fixtures of 15 mm nominal dia. with approved make of following type including providing & fixing specials, wall flanges and fixing to concealed / exposed pipe line with leak proof threaded joints using tephlon tapes, testing the joints hydraulically to a pressure of 10 kg./ sq.cm, rectifying the leaky joints. if any, including cleaning etc. complete all as per specification. | 1.02 | Construction of chamber for 100mm sluice plates | item2 | 213 | Nos | ||||||||||||||||||||||||||||||||||||||||||||||||
| 229.01 | PTMT Push cock of'hindware' or approved equivalent | 12.00 | Each | Excess(+) | 1 | Full Conversion | INR | 0.00 | 0.00 | INR Zero Only | 1.02 | Construction of chamber for 100mm sluice plates | item2 | 213 | Nos | |||||||||||||||||||||||||||||||||||||||
| 229.02 | PTMT Angle stop cock of'hindware' or approved equivalent. | 10.00 | Each | Excess(+) | 1 | Full Conversion | INR | 0.00 | 0.00 | INR Zero Only | 1.02 | Construction of chamber for 100mm sluice plates | item2 | 213 | Nos | |||||||||||||||||||||||||||||||||||||||
| 229.03 | PTMT Pillar cock of'hindware' or approved equivalent | 4.00 | Each | Excess(+) | 1 | Full Conversion | INR | 0.00 | 0.00 | INR Zero Only | 1.02 | Construction of chamber for 100mm sluice plates | item2 | 213 | Nos | |||||||||||||||||||||||||||||||||||||||
| 230 | Providing Flushing arrangement to Urinal etc., including providing and fixing manually operated flush valves consisting following items of work:-i) Providing and fixing flush valve in position using CP brass screws, rawl plugs, brackets etc.as per the manufacturer's recommendation, making inlet and outlet connections all complete.ii) Providing 40/32/25/20/15 mm nominal dia. CPVC Pipe from Flush Valve with Urinal including the cost of fittings, fixtures, reducers, CP brass fittings on exposed/concealed portion and jointing materials etc. all complete.iii) Cutting hole, making chases in the wall, floors, slabs etc. and reinstating the surface to the original condition, painting all metallic parts with two coats of flat oil paint of approved make and shade over a coat of primer, finishing the gaps with white/ matching cement etc. all complete.iv) Testing the entire system to the full satisfaction of the E.I.C. | 2 | Construction of chamber for 100mm sluices valve | item3 | 10 | Nos | ||||||||||||||||||||||||||||||||||||||||||||||||
| 230.01 | Auto closing Urinal flush valve of Jaquar brand 'Pressmatic' as per Cat No.PRS-077 or approvedequivalent make including making inlet and outlet connections all complete | 7.00 | Each | Excess(+) | 1 | Full Conversion | INR | 0.00 | 0.00 | INR Zero Only | 2 | Construction of chamber for 100mm sluices valve | item3 | 10 | Nos | |||||||||||||||||||||||||||||||||||||||
| 231 | Providing and fixing the following PTMT Brass Bathroom / toilet accessories of following make and fixing on the wall using CP brass screws, rawl plugs etc.as per manufacturer's requirement all complete at the locations shown and as directed by the E-in-C. | 1.02 | Construction of chamber for 100mm sluice plates | item2 | 213 | Nos | ||||||||||||||||||||||||||||||||||||||||||||||||
| 231.01 | PTMT coat/rope hook of'hindware' or approved equivalent | 2.00 | Each | Excess(+) | 1 | Full Conversion | INR | 0.00 | 0.00 | INR Zero Only | 1.02 | Construction of chamber for 100mm sluice plates | item2 | 213 | Nos | |||||||||||||||||||||||||||||||||||||||
| 232 | Supplying & fixing following size C.P brass Coupling with approved quality C.P brass Mosquito proof jalli including providing CPVC/ GI connector, bend and any other CPVC/ GI specials, if required for fixing the coupling, jointing materials such as tefflon tapes, spunyarn, white zinc, fixing the same to GI/CPVC pipes etc. complete as specified & directed for overflow / vent pipe of water tank. | 1.02 | Construction of chamber for 100mm sluice plates | item2 | 213 | Nos | ||||||||||||||||||||||||||||||||||||||||||||||||
| 232.01 | 50 mm dia. | 2.00 | Each | Excess(+) | 1 | Full Conversion | INR | 0.00 | 0.00 | INR Zero Only | 1.02 | Construction of chamber for 100mm sluice plates | item2 | 213 | Nos | |||||||||||||||||||||||||||||||||||||||
| Total in Figures | 0.00 | 0.00 | INR Zero Only | 4 | Construction of chamber for 100mm sluice plates | item5 | 10 | Nos | ||||||||||||||||||||||||||||||||||||||||||||||
| Quoted Rate in Figures | Select | 0.0000 | 0.0000 | Zero Only | ||||||||||||||||||||||||||||||||||||||||||||||||||
| Quoted Rate in Words | INR Zero Only |
| Item Rate BoQ | 1 | |||||||||||||||||||||||||||||||||||||||||||||||||||||
| BoQ_Ver4.0 | Item Rate | Normal | INR Only | INR | ||||||||||||||||||||||||||||||||||||||||||||||||||
| Select, Excess (+), Less (-) | Less (-) | |||||||||||||||||||||||||||||||||||||||||||||||||||||
| Tender Inviting Authority: | ||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Name of Work: Construction of Public Toilet Facility Near Wester Sector at Anushaktinagar and Anuban at Old Mandala, Renovation of Toilets at Diepensary No-8,9 at Anushaktinagar and Anand Bhavan at Bhulabhai Desai Raod,Mumbai. | ||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Contract No: DCSEM/CQD/QSB/25-26/NIT/46 dt.12.08 .2025 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Name of the Bidder/ Bidding Firm / Company : | ||||||||||||||||||||||||||||||||||||||||||||||||||||||
| PRICE SCHEDULE (This BOQ template must not be modified/replaced by the bidder and the same should be uploaded after filling the relevant columns, else the bidder is liable to be rejected for this tender. Bidders are allowed to enter the Bidder Name and Values only) | ||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Sl. No. | Item Description | Item Code / Make | Quantity | Units | Estimated Rate | Addition / Deduction | Addition / Deduction Values | Currency Convertion against each Item | Quoted Currency in INR / Other Currency | BASIC RATE In Figures To be entered by the Bidder Rs. P | Excise Duty | VAT | Freight Charges ( Unloading & Stacking) | Any Other Taxes/Duties/Levies | Other Taxes 2 | IIIrd Party i.e DGS&D / RITES etc Inspection Charges @0.34%+Service Tax | Less for Cenvat Credit,if any respect of Supplies Under full Excise Duty Category | TOTAL AMOUNT Without Taxes | TOTAL AMOUNT With Taxes | TOTAL AMOUNT In Words | ||||||||||||||||||||||||||||||||||
| 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 10 | 11 | 12 | 13 | 14 | 15 | 16 | 17 | 18 | 19 | 20 | 21 | 22 | 23 | 24 | 25 | 26 | 27 | 28 | 29 | 30 | 31 | 32 | 33 | 34 | 35 | 36 | 37 | 38 | 39 | 40 | 41 | 42 | 43 | 44 | 45 | 46 | 47 | 48 | 49 | 50 | 51 | 52 | 53 | 54 | 55 |
| 3 | PART- C : ELECTRICAL WORKS | 1.01 | Supplying, Conveying and fixing spls. Including eart | item1 | 123.223 | Nos | ||||||||||||||||||||||||||||||||||||||||||||||||
| 301 | Point wiring: Providing point wiring for light / exhaust fan / 6A socket outlet etc. with 1100V grade, FRLS grade, PVC insulated multi stranded copper wires in casing capping / PVC HMS conduit including concealment of conduit in brick wall, controlling switche with frame & cover plates mounted in concealed MS switch boards , 3 plate ceiling rose with PVC round plate/ box, ferrule numbers on both sides, PVC insulated copper conductor wires for earthing of above said specifications, labelling etc. all as per site conditions, specifications and as instructed by Engineer-in-charge. Note: i) Wiring layout arrangement and samples of switch boxes are to be got approved prior to procurement. ii) All switches, sockets, fan regulators, cover plates & frame, boxes etc. shall be of white colour & similar to Myrius series of M/s Legrand and other accessories like lamp holders, ceiling roses & door bell etc. shall be of polycarbonate body and similar to CIVIC XP series of M/s Rapid Enterprises Pvt. Ltd. (i.e. Vinay) and shall preferably ISI mark. iii)The dimensions of switches, sockets, fan regulators shall preferably be ISI mark. iv) PVC sleeves will have to be provided for crossing the wall, drilling holes & its refinishing to be also included in the scope. v) All the metal boxes shall be earthed. | 1.02 | Construction of chamber for 100mm sluice plates | item2 | 213 | Nos | ||||||||||||||||||||||||||||||||||||||||||||||||
| 301.01 | Primary light point / Exhaust fan point with 1.5 sq.mm wires complete with 6A, 240V controlling switch. | 22.00 | Point | Excess(+) | 1 | Full Conversion | INR | 0.00 | 0.00 | INR Zero Only | 1.02 | Construction of chamber for 100mm sluice plates | item2 | 213 | Nos | |||||||||||||||||||||||||||||||||||||||
| 302 | Supply installation testing & commissioning of 700 lumen LED bulkhead lighting fixture having minimum efficacy of 105 lm/watt, cool white colour temperature with diffused polycarbonate cover & pressure die cast housing having at least IP66 & IK09 protection etc. complete with mounting accessories on surface of slab/beam/ wall with required hardware, interconnections between light point and light fixture with copper flexible TRS wire all as required & instructed by E-I-C. | 14.00 | each | Excess(+) | 1 | Full Conversion | INR | 0.00 | 0.00 | INR Zero Only | 2 | Construction of chamber for 100mm sluices valve | item3 | 10 | Nos | |||||||||||||||||||||||||||||||||||||||
| 303 | Supply installation testing & commissioning of 300 mm Heavy duty Exhaust Fan having following specifications interconnection with 3Cx 1.5 sq.mm Cu. conductor PVC insulated flexible cable: Blade design: Aerodynamically designed & Balanced Blade Sweep size : 300 mm No. of blades : 4 Air delivery 1710 m³/h Noise level 45 dB - 50 dB Power consumption 90W Rated frequency 50 Hz Rated voltage 230 V Double Ball Bearing Tolerances on Ratig shall be as per IS 2312-1967 with up to date amendments. S.S. 16SWG Wire Mesh cover from inside ( impeller side) of approximate size 500mm x500mm x 120 mm for covering exhaust fan blade of 300 size exhaust fan with all SS Angle frame & SS Hardware all as required & Instructed by EIC | 8.00 | each | Excess(+) | 1 | Full Conversion | INR | 0.00 | 0.00 | INR Zero Only | 2 | Construction of chamber for 100mm sluices valve | item3 | 10 | Nos | |||||||||||||||||||||||||||||||||||||||
| 304 | Distribution Boards Supply, installation ,testing & commissioning of readymade double door 6 way SPN DB having IP54 protection similar to model No.:5076 41 of M/s Legrand make complete with wiring kit, nuetral link, earth link etc., ready made cable end box of same make including providing following components as required & instructed by the Engineer-in-charge. i) 6-25A RCBO, 2P, 6kA, 30mA sensitivity,2 module - 1 no. ii) 6 A, 10kA breaking capacity ,C-curve, SP, MCB - 2 nos. iii) Providing Danger board, MCB blanks, Schematic Diagram, Ferule numbers, etc. iv) 2nos 4 sq.mm & 1nos 2.5sq.mm 1100V flexible Cu conductor PVC insulated flexible wires in PVC conduit between DB & meter box. Scope of work include supply & installation of readymade weather proof HOT PRESS MOULDED SМС SINGLE PHASE МЕТER BOX with SMC Base & Door, Hinge, Viewing Glass, Earth Bolt, Plugged, etc. on surface of wall/beam / column near DB with required hardware. | 2.00 | Job | Excess(+) | 1 | Full Conversion | INR | 0.00 | 0.00 | INR Zero Only | 1.02 | Construction of chamber for 100mm sluice plates | item2 | 213 | Nos | |||||||||||||||||||||||||||||||||||||||
| 305 | Earth Station: Providing earth station with heavy dipped GI earth plates electrode 600 x 600 x 6.0 mm in size at the depth minimum of 2.5 m below ground level (bottom of Plate) confirming to IS 3043 complete with all required materials like coke / charcoal, salt, G.I nut bolts, washers, 19 mm dia GI pipe (B class), 150 mm thick concrete wall chamber duly plastered having size of 500 x 500 x 500 mm, heavy duty (minimum 6 mm thick) M.S chequered plate cover, associated materials like 40 x 40 x 5 mm angle iron frame work, hinged locking arrangements, complete with funnels, GI test links (50 x 6 mm), two runs of 25 x 6mm G.I strips for connecting G.I plate & test link etc. including excavation of ground in all types of soils, refilling & removal of excess earth within a radius of 3000 m etc. all as required & instructed by the Engineer-in-charge. Note:- 1. The chamber cover & frame shall be got approved by Department & painted with two coats of red oxide & one coat of enamel paint. 2. Painting of earth value & test date on cover plate. 3. Earthing strips shall be welded with the earthling plate before galvanizing & two holes on each strip & plate shall be made for fixing the screws. | 2.00 | Job | Excess(+) | 1 | Full Conversion | INR | 0.00 | 0.00 | INR Zero Only | 1.02 | Construction of chamber for 100mm sluice plates | item2 | 213 | Nos | |||||||||||||||||||||||||||||||||||||||
| 306 | Supply, installation, testing & commissioning of hot dipped following GI strip fixed to wall / slab / column / beam with heavy duty GI spacer saddle or in ground at a depth of 750 mm below ground level including excavation in all type of soil , interconnection of earth strip / wire GI nut bolts & washers, painting with two coats of black bituminous compound for earth strip in ground and green colour enamel painting strip on surface etc. all as required & instructed by the Engineer-in-charge | 20.00 | M | Excess(+) | 1 | Full Conversion | INR | 0.00 | 0.00 | INR Zero Only | 1.02 | Construction of chamber for 100mm sluice plates | item2 | 213 | Nos | |||||||||||||||||||||||||||||||||||||||
| Total in Figures | 0.00 | 0.00 | INR Zero Only | 4 | Construction of chamber for 100mm sluice plates | item5 | 10 | Nos | ||||||||||||||||||||||||||||||||||||||||||||||
| Quoted Rate in Figures | Select | 0.0000 | 0.0000 | Zero Only | ||||||||||||||||||||||||||||||||||||||||||||||||||
| Quoted Rate in Words | INR Zero Only |
Andaman & Nicobar Tenders |Andhra Pradesh Tenders |Arunachal Pradesh Tenders |Assam Tenders |Bihar Tenders |Chandigarh Tenders |Chhattisgarh Tenders |Dadra & Nagar Haveli Tenders |Daman & Diu Tenders |Delhi Tenders |Goa Tenders |Gujarat Tenders |Haryana Tenders |Himachal Pradesh Tenders |Jammu & Kashmir Tenders |Jharkhand Tenders |Karnataka Tenders |Kerala Tenders |Ladakh Tenders |Lakshadweep Tenders |Madhya Pradesh Tenders |Maharashtra Tenders |Manipur Tenders |Meghalaya Tenders |Mizoram Tenders |Nagaland Tenders |Odisha Tenders |Pondicherry Tenders |Punjab Tenders |Rajasthan Tenders |Sikkim Tenders |Tamil Nadu Tenders |Telangana Tenders |Tripura Tenders |Uttarakhand Tenders |Uttar Pradesh Tenders |West Bengal Tenders |