Bidhelp
National Institute of Technology Karnataka
National Institute of Technology Karnataka
Dy Director
Karnataka QTY :

Items - Providing LT UG cables and electrical wiring works for the Air Conditioner inside ISH building in NITK

Tender Details
Costs
Documents
BOQ

BoQ1

Item Rate BoQ
BoQ_Ver3.0Item RateNormalINR OnlyINR
Select, Excess (+), Less (-)Less (-)
Tender Inviting Authority: National Institute of Technology Karnataka, Surathkal, Mangaluru - 575025.
Name of Work: Providing LT UG cables and electrical wiring works for the Air Conditioner inside ISH building in NITK.
Contract No: Notice inviting e-Tenders No. 82/Tender-17/2025-26/HD Dated 19-08-2025
Name of the Bidder/ Bidding Firm / Company :
PRICE SCHEDULE (This BOQ template must not be modified/replaced by the bidder and the same should be uploaded after filling the relevent columns, else the bidder is liable to be rejected for this tender. Bidders are allowed to enter the Bidder Name and Values only )
Sl. No.Item DescriptionItem Code / MakeQuantityUnitsEstimated Rate in Rs. PAddition / DeductionAddition / Deduction ValuesCurrency Convertion against each ItemQuoted Currency in INR / Other CurrencyRATE per unit (Without GST) In Figures To be entered by the Bidder in Rs. P GST amount on price quotedTotal Price per Unitwithout GSTAmount with GSTOther Taxes 2IIIrd Party i.e DGS&D / RITES etc Inspection Charges @0.34%+Service TaxLess for Cenvat Credit,if any respect of Supplies Under full Excise Duty Category Total rate including GSTTOTAL AMOUNT Without GST in Rs. PTOTAL AMOUNT With GSTTOTAL AMOUNT with GST In Words
12345678910111213141516171819202122232425262728293031323334353637383940414243444546474849505152535455
1Fabricating supplying and mounting MS box made out 16 SWG suitable for floor / wall mounting, fully weather proof with provision for better heat dissipation, provided with hinged front cover, equipped with tamper proof locking arrangements, with suitable size clamps with necessary cable entry pipe with gland and box should be finished with 2 coats of red oxide primer paint & finally finished with approved colour enamelled metal paint, naming of incoming and outgoings, wiring etc. Approximate Size of panel: 100x100x30cm42800Sq. cms0.43Excess(+)1Full ConversionINR0.00000.00000.000.000.000.00INR Zero Only1.01Supplying, Conveying and fixing spls. Including eartitem1123.223Nos
2Supplying and fixing Four Pole 250 Amps 25 kA Moulded Case Circuit Breaker (MCCB) over the existing wood/panel board using necessary screws, bolts, nuts, necessary phase separators, handle, including spreaders for MCCBs and wiring complete. Protection of Overload and Short circuit in Thermal Magnetic Release. Microprocessor release shall have Earth Fault as per IS-13947. (Icu=100% lcs). In 4P MCCB, all Poles should have protection for Short- Circuit /Over Load. For Microprocessor MCCBS Facility for segregating Priority and Non-Priority loads must be available in the MCCB. MCCB shall be provided with double insulation (insulation between front cover and internal power circuits to avoid any accidental contact with live current carrying path with the front cover open). Multi-pole breakers shall be designed to break all the poles simultaneously and they shall have a single mechanism. Make: Legrand, ABB, L&T, Schnider1Number21391.00Excess(+)1Full ConversionINR0.000.000.000.000.000.00INR Zero Only1.01Supplying, Conveying and fixing spls. Including eartitem1123.223Nos
3Supplying and fixing Four Pole 160 Amps 25 kA Moulded Case Circuit Breaker (MCCB) over the existing wood/panel board using necessary screws, bolts, nuts, necessary phase separators, handle, including spreaders for MCCBs and wiring complete. Protection of Overload and Short circuit in Thermal Magnetic Release. Microprocessor release shall have Earth Fault as per IS-13947. (Icu=100% lcs). In 4P MCCB, all Poles should have protection for Short- Circuit /Over Load. For Microprocessor MCCBS Facility for segregating Priority and Non-Priority loads must be available in the MCCB. MCCB shall be provided with double insulation (insulation between front cover and internal power circuits to avoid any accidental contact with live current carrying path with the front cover open). Multi-pole breakers shall be designed to break all the poles simultaneously and they shall have a single mechanism. Make: Legrand, ABB, L&T, Schnider3Number13447.00Excess(+)1Full ConversionINR0.000.000.000.000.000.00INR Zero Only1.01Supplying, Conveying and fixing spls. Including eartitem1123.223Nos
4Supplying 250 Amps rated 3phase with neutral bus bar using required capacity electrolytic aluminium strips covered with heat shrinkable coloured PVC sleeve, mounted on phenolic / FRP / DMC insulator which are mounted on powder coated 40x6mm M.S. flat frame work in existing panel board. The bus bar shall have suitable holes for termination of incoming and outgoing cables as per IS specification with necessary bolts, nuts and washers etc., complete. SIZE: 250 Amps 4X30X10mm Aluminium Strip3Meter3435.00Excess(+)1Full ConversionINR0.000.000.000.000.000.00INR Zero Only1.01Supplying, Conveying and fixing spls. Including eartitem1123.223Nos
5Supplying and fixing of LED type panel board indicating lamp with required colour suitable for 230/440VAC. 50 Hz 12/24V D.C.3Number515.00Excess(+)1Full ConversionINR0.000.000.000.000.000.00INR Zero Only1.01Supplying, Conveying and fixing spls. Including eartitem1123.223Nos
6Supply, fixing and wiring 50/5 to 400/5 amps 5 VA burden Current Transformer. Class 0.5 accuracy with tape wound3Number562.00Excess(+)1Full ConversionINR0.000.000.000.000.000.00INR Zero Only1.01Supplying, Conveying and fixing spls. Including eartitem1123.223Nos
7Supplying of multifunction digital meter with three-line backlight LCD type display for voltage, Current, frequency, Power, power factor, kVA, kWH, kVAR suitable for 3phase, 4wire LT network with IP54 degree of protection and completely wired as required with communication Port and Class 0.5s accuracy. Make: L&T, ABB, Elmeasure, Select.1Number9315.00Excess(+)1Full ConversionINR0.000.000.000.000.000.00INR Zero Only1.01Supplying, Conveying and fixing spls. Including eartitem1123.223Nos
8Supplying of 3.5 core 95 Sq mm (21 GI strips – 4 x 0.8 mm) 1.1 kV, XLPE or Heat resistant PVC insulated, PVC extruded Inner Sheath Armoured LTUG Cable as per IS-1554 (Part-1) or IS-7098 Part-1, Armouring strip thickness and resistivity as per IS-3975 180Meter373.22Excess(+)1Full ConversionINR0.000.000.000.000.000.00INR Zero Only1.01Supplying, Conveying and fixing spls. Including eartitem1123.223Nos
9Earth work excavation for pipelines/cables by Manual means upto 600 mm trench width, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, removal of stumps and other deleterious matter, including dressing of excavated surfaces, disposing off or levelling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m. Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering and lift Up to 1.5 m including cost of labour, tools, usage& other appurtenances required to complete the work. In all kinds of soils, Depth upto 1,50 m (100 x 0.5 x 0.7mtr)35CMT484.00Excess(+)1Full ConversionINR0.000.000.000.000.000.00INR Zero Only1.01Supplying, Conveying and fixing spls. Including eartitem1123.223Nos
10Labour charges for laying of 95 Sq mm size of 1.1 kV class LT UG cable in existing trench / stoneware pipe / on pole / on wall. using Woodens / Aluminium Rollers as directed by the departmental staff180Meter31.13Excess(+)1Full ConversionINR0.000.000.000.000.000.00INR Zero Only1.01Supplying, Conveying and fixing spls. Including eartitem1123.223Nos
11Labour charges for laying of 25 Sq mm size of 1.1 kV class LT UG cable in existing trench / stoneware pipe / on pole / on wall. using Woodens / Aluminium Rollers as directed by the departmental staff35Meter20.88Excess(+)1Full ConversionINR0.000.000.000.000.000.00INR Zero Only1.01Supplying, Conveying and fixing spls. Including eartitem1123.223Nos
12Wiring for lighting/power circuit using 2 run x 4 Sq mm + 1 run x 2.5 Sq mm PVC insulated 1100V grade, multistrand copper conductor single core cable in open or concealed system of wiring. Make: Finolex / Polycab / Havells / Anchor / V-guard.512Meter168.00Excess(+)1Full ConversionINR0.000.000.000.000.000.00INR Zero Only1.01Supplying, Conveying and fixing spls. Including eartitem1123.223Nos
13Supplying heavy gauge PVC conduit pipe of 19/20 mm dia. 2 mm thick conforming to IS 2509 with suitable size bends, junction boxes, adhesive paste etc., and fixing using inverted wood plugs in case of RCC ceiling and RCC wall stone structure or rawl plugs in case of brick walls and cement plastering damaged portion using heavy gauge saddles at an interval of 700mm using WF screws. 130Meter69.00Excess(+)1Full ConversionINR0.000.000.000.000.000.00INR Zero Only1.01Supplying, Conveying and fixing spls. Including eartitem1123.223Nos
14Supplying and fixing of 50 mm PVC casing and capping on the wall or ceiling using necessary materials like bends, junction box, elbows, screws at an interval of 300 mm as required 72Meter43.00Excess(+)1Full ConversionINR0.000.000.000.000.000.00INR Zero Only1.01Supplying, Conveying and fixing spls. Including eartitem1123.223Nos
15Supplying and fixing regular MCCB distribution Panel confirming to IS/IEC 61439-3 and IK09 tested as per IS/IEC62262 with minimum IP43 protection provided with Polyurethane (PUR) gasket, with suitable earthing system, on wall / wood board / flush mounting using required cl A, bolts, nuts, etc., with provision for fixing of suitable type capacity MCCB's as an incomer for 3phase Double door with necessary bus bar completely wired to use on 440V 3phase 4wire powder coated painting etc., complete with a provision for fixing of single/three phase suitable capacity MCB's as outgoings confirming to IS/IEC 60898 - 2. – 8 Way VDB2Number12605.00Excess(+)1Full ConversionINR0.000.000.000.000.000.00INR Zero Only1.01Supplying, Conveying and fixing spls. Including eartitem1123.223Nos
16Supplying and fixing Four Pole 160 Amps 25 kA Moulded Case Circuit Breaker (MCCB) over the existing wood/panel board using necessary screws, bolts, nuts, necessary phase separators, handle, including spreaders for MCCBs and wiring complete. Protection of Overload and Short circuit in Thermal Magnetic Release. Microprocessor release shall have Earth Fault as per IS-13947. (Icu=100% lcs). In 4P MCCB, all Poles should have protection for Short- Cicrcuit /Over Load. For Microprocessor MCCBS Facility for segregating Priority and Non-Priority loads must be available in the MCCB. MCCB shall be provided with double insulation (insulation between front cover and internal power circuits to avoid any accidental contact with live current carrying path with the front cover open). Multi-pole breakers shall be designed to break all the poles simultaneously and they shall have a single mechanism.2Number13447.00Excess(+)1Full ConversionINR0.00000.00000.000.000.000.00INR Zero Only1.01Supplying, Conveying and fixing spls. Including eartitem1123.223Nos
17Supplying & fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with short circuit breaking capacity of 10K and complete wiring as required confirming to IEC60898 – 20 Amps DP24Number739.00Excess(+)1Full ConversionINR0.000.000.000.000.000.00INR Zero Only1.01Supplying, Conveying and fixing spls. Including eartitem1123.223Nos
18Supplying and fixing of Metal Socket set of 2pole and earth plugs and socket for incorporating SP and TP MCB (without MCB). The entire plug and socket shall be mounted in a thermoplastic / powder coated metal box & wired completely. – 20 Amps SP&N24Number971.00Excess(+)1Full ConversionINR0.000.000.000.000.000.00INR Zero Only1.01Supplying, Conveying and fixing spls. Including eartitem1123.223Nos
19Supplying & fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with short circuit breaking capacity of 10K and complete wiring as required confirming to IEC60898 – 20 Amps DP24Number739.00Excess(+)1Full ConversionINR0.00000.00000.000.000.000.00INR Zero Only1.01Supplying, Conveying and fixing spls. Including eartitem1123.223Nos
20Supplying of 3.5 core 25 Sq mm (12 GI strips – 4 x 0.8 mm) 1.1 kV, XLPE or Heat resistant PVC insulated, PVC extruded Inner Sheath Armoured LTUG Cable as per IS-1554 (Part-1) or IS-7098 Part-1, Armouring strip thickness and resistivity as per IS-3975. Make: Finolex, Havells, Polycad, Glostar35Meter139.55Excess(+)1Full ConversionINR0.000.000.000.000.000.00INR Zero Only1.01Supplying, Conveying and fixing spls. Including eartitem1123.223Nos
21Cutting of Tar Road surface for cable trenches and disposing of the excavated earth, as directed including Barricading, Danger Lighting then Refilling the cable trenches. Size ( L 5 x W 0.5 x D 0.3)0.75CMT777.20Excess(+)1Full ConversionINR0.000.000.000.000.000.00INR Zero Only1.01Supplying, Conveying and fixing spls. Including eartitem1123.223Nos
22Supplying and fixing of tinned Aluminium lugs and crimping and wiring to terminal point. – 95 Sq mm. Make: Dowells / Braco / MIC / Jaison6Number15.00Excess(+)1Full ConversionINR0.000.000.000.000.000.00INR Zero Only1.01Supplying, Conveying and fixing spls. Including eartitem1123.223Nos
23Supplying and fixing of tinned Aluminium lugs and crimping and wiring to terminal point. – 70 Sq mm. Make: Dowells / Braco / MIC / Jaison2Number13.00Excess(+)1Full ConversionINR0.000.000.000.000.000.00INR Zero Only1.01Supplying, Conveying and fixing spls. Including eartitem1123.223Nos
24Supplying and fixing of tinned Aluminium lugs and crimping and wiring to terminal point. – 25 Sq mm. Make: Dowells / Braco / MIC / Jaison16Number3.00Excess(+)1Full ConversionINR0.000.000.000.000.000.00INR Zero Only1.01Supplying, Conveying and fixing spls. Including eartitem1123.223Nos
25Supplying and fixing of heavy-duty cable glands suitable for UG cable of 1.1 KV class – 45 mm2Number197.00Excess(+)1Full ConversionINR0.000.000.000.000.000.00INR Zero Only1.01Supplying, Conveying and fixing spls. Including eartitem1123.223Nos
26Supplying and fixing of heavy duty cable glands suitable for UG cable of 1.1 KV class – 32 mm4Number95.00Excess(+)1Full ConversionINR0.000.000.000.000.000.00INR Zero Only1.01Supplying, Conveying and fixing spls. Including eartitem1123.223Nos
27Supplying and fixing of LT Rout joint indicating concreate slabs at an intervals of 6 mtrs (LT CABLES)5Number133.00Excess(+)1Full ConversionINR0.000.000.000.000.000.00INR Zero Only1.01Supplying, Conveying and fixing spls. Including eartitem1123.223Nos
28Supply and laying of following size double walled corrugated (DWC) HDPE pipe including all necessary connecting cockets / coupling / Tees/Bends/End caps of same materials in existing trench as pe IS 14930 part II suitable for drawing Underground cables. – 110 mm OD / 94 mm ID 90meter368.00Excess(+)1Full ConversionINR0.000.000.000.000.000.00INR Zero Only1.01Supplying, Conveying and fixing spls. Including eartitem1123.223Nos
Total in Figures0.000.00INR Zero Only4Construction of chamber for 100mm sluice platesitem510Nos
Quoted Rate in FiguresSelect0.00000.0000 Zero Only
Quoted Rate in WordsINR Zero Only